Merge branch 'caution-to-warning' into 'master'

Change CAUTION to WARNING in documentation alerts

See merge request gitlab-org/gitlab!49252

doc/administration/auth/ldap/index.md

@@ -615,7 +615,7 @@ By default, GitLab runs a group sync process every hour, on the hour.
 The values shown are in cron format. If needed, you can use a
 [Crontab Generator](http://www.crontabgenerator.com).
 
-CAUTION: **Important:**
+WARNING:
 Do not start the sync process too frequently as this
 could lead to multiple syncs running concurrently. This is primarily a concern
 for installations with a large number of LDAP users. Please review the

doc/administration/auth/ldap/ldap-troubleshooting.md

@@ -673,7 +673,7 @@ adfind -h ad.example.org:636 -ssl -u "CN=GitLabSRV,CN=Users,DC=GitLab,DC=org" -u
 
 ### Rails console
 
-CAUTION: **Caution:**
+WARNING:
 It is very easy to create, read, modify, and destroy data with the rails
 console. Be sure to run commands exactly as listed.
 

doc/administration/auth/smartcard.md

@@ -30,7 +30,7 @@ GitLab supports two authentication methods:
 
 > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/726) in [GitLab Premium](https://about.gitlab.com/pricing/) 11.6 as an experimental feature.
 
-CAUTION: **Caution:**
+WARNING:
 Smartcard authentication against local databases may change or be removed completely in future
 releases.
 

doc/administration/external_pipeline_validation.md

@@ -9,7 +9,7 @@ type: reference, howto
 
 You can use an external service for validating a pipeline before it's created.
 
-CAUTION: **Warning:**
+WARNING:
 This is an experimental feature and subject to change without notice.
 
 ## Usage

doc/administration/feature_flags.md

@@ -36,7 +36,7 @@ error, it's very important that you [**provide feedback**](https://gitlab.com/gi
 as possible so we can improve or fix it while behind a flag. When you upgrade
 GitLab to an earlier version, the feature flag status may change.
 
-CAUTION: **Caution:**
+WARNING:
 Features deployed behind feature flags may not be ready for
 production use. However, disabling features behind flags that were deployed
 enabled by default may also present a risk. If they're enabled, we recommend

doc/administration/geo/disaster_recovery/bring_primary_back.md

@@ -13,7 +13,7 @@ restore your original configuration. This process consists of two steps:
 1. Making the old **primary** node a **secondary** node.
 1. Promoting a **secondary** node to a **primary** node.
 
-CAUTION: **Caution:**
+WARNING:
 If you have any doubts about the consistency of the data on this node, we recommend setting it up from scratch.
 
 ## Configure the former **primary** node to be a **secondary** node

doc/administration/geo/disaster_recovery/index.md

@@ -13,7 +13,7 @@ failover with minimal effort, in a disaster situation.
 
 See [Geo limitations](../index.md#limitations) for more information.
 
-CAUTION: **Warning:**
+WARNING:
 Disaster recovery for multi-secondary configurations is in **Alpha**.
 For the latest updates, check the [Disaster Recovery epic for complete maturity](https://gitlab.com/groups/gitlab-org/-/epics/590).
 Multi-secondary configurations require the complete re-synchronization and re-configuration of all non-promoted secondaries and
@@ -36,7 +36,7 @@ order to avoid unnecessary data loss.
 
 ### Step 2. Permanently disable the **primary** node
 
-CAUTION: **Warning:**
+WARNING:
 If the **primary** node goes offline, there may be data saved on the **primary** node
 that has not been replicated to the **secondary** node. This data should be treated
 as lost if you proceed.
@@ -140,7 +140,7 @@ Note the following when promoting a secondary:
    secondary. If the node is paused, be sure to resume before promoting. This
    issue has been fixed in GitLab 13.4 and later.
 
-   CAUTION: **Caution:**
+   WARNING:
    If the secondary node [has been paused](../../geo/index.md#pausing-and-resuming-replication), this performs
    a point-in-time recovery to the last known state.
    Data that was created on the primary while the secondary was paused will be lost.
@@ -180,7 +180,7 @@ secondary is paused fails. Do not pause replication before promoting a
 secondary. If the node is paused, be sure to resume before promoting. This
 issue has been fixed in GitLab 13.4 and later.
 
-CAUTION: **Caution:**
+WARNING:
    If the secondary node [has been paused](../../geo/index.md#pausing-and-resuming-replication), this performs
 a point-in-time recovery to the last known state.
 Data that was created on the primary while the secondary was paused will be lost.

doc/administration/geo/disaster_recovery/runbooks/planned_failover_multi_node.md

@@ -5,7 +5,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 type: howto
 ---
 
-CAUTION: **Caution:**
+WARNING:
 This runbook is in **alpha**. For complete, production-ready documentation, see the
 [disaster recovery documentation](../index.md).
 
@@ -134,7 +134,7 @@ follow these steps to avoid unnecessary data loss:
 
 1. Finish replicating and verifying all data:
 
-   CAUTION: **Caution:**
+   WARNING:
    Not all data is automatically replicated. Read more about
    [what is excluded](../planned_failover.md#not-all-data-is-automatically-replicated).
 
@@ -163,7 +163,7 @@ follow these steps to avoid unnecessary data loss:
 
 1. In this final step, you need to permanently disable the **primary** node.
 
-   CAUTION: **Caution:**
+   WARNING:
    When the **primary** node goes offline, there may be data saved on the **primary** node
    that has not been replicated to the **secondary** node. This data should be treated
    as lost if you proceed.
@@ -218,7 +218,7 @@ A new **secondary** should not be added at this time. If you want to add a new
 **secondary**, do this after you have completed the entire process of promoting
 the **secondary** to the **primary**.
 
-CAUTION: **Caution:**
+WARNING:
 If you encounter an `ActiveRecord::RecordInvalid: Validation failed: Name has already been taken` error during this process, read
 [the troubleshooting advice](../../replication/troubleshooting.md#fixing-errors-during-a-failover-or-when-promoting-a-secondary-to-a-primary-node).
 
@@ -233,7 +233,7 @@ secondary is paused fails. Do not pause replication before promoting a
 secondary. If the node is paused, be sure to resume before promoting. This
 issue has been fixed in GitLab 13.4 and later.
 
-CAUTION: **Caution:**
+WARNING:
    If the secondary node [has been paused](../../../geo/index.md#pausing-and-resuming-replication), this performs
 a point-in-time recovery to the last known state.
 Data that was created on the primary while the secondary was paused will be lost.

doc/administration/geo/disaster_recovery/runbooks/planned_failover_single_node.md

@@ -5,7 +5,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 type: howto
 ---
 
-CAUTION: **Caution:**
+WARNING:
 This runbook is in **alpha**. For complete, production-ready documentation, see the
 [disaster recovery documentation](../index.md).
 
@@ -122,7 +122,7 @@ follow these steps to avoid unnecessary data loss:
 
 1. Finish replicating and verifying all data:
 
-   CAUTION: **Caution:**
+   WARNING:
    Not all data is automatically replicated. Read more about
    [what is excluded](../planned_failover.md#not-all-data-is-automatically-replicated).
 
@@ -151,7 +151,7 @@ follow these steps to avoid unnecessary data loss:
 
 1. In this final step, you need to permanently disable the **primary** node.
 
-   CAUTION: **Caution:**
+   WARNING:
    When the **primary** node goes offline, there may be data saved on the **primary** node
    that has not been replicated to the **secondary** node. This data should be treated
    as lost if you proceed.

doc/administration/geo/index.md

@@ -17,7 +17,7 @@ Geo is the solution for widely distributed development teams and for providing a
 
 ## Overview
 
-CAUTION: **Caution:**
+WARNING:
 Geo undergoes significant changes from release to release. Upgrades **are** supported and [documented](#updating-geo), but you should ensure that you're using the right version of the documentation for your installation.
 
 Fetching large repositories can take a long time for teams located far from a single GitLab instance.
@@ -207,7 +207,7 @@ secondary is paused fails. Do not pause replication before promoting a
 secondary. If the node is paused, be sure to resume before promoting. This
 issue has been fixed in GitLab 13.4 and later.
 
-CAUTION: **Caution:**
+WARNING:
 Pausing and resuming of replication is currently only supported for Geo installations using an
 Omnibus GitLab-managed database. External databases are currently not supported.
 
@@ -267,7 +267,7 @@ To find out how to disable Geo, see [Disabling Geo](replication/disable_geo.md).
 
 ## Limitations
 
-CAUTION: **Caution:**
+WARNING:
 This list of limitations only reflects the latest version of GitLab. If you are using an older version, extra limitations may be in place.
 
 - Pushing directly to a **secondary** node redirects (for HTTP) or proxies (for SSH) the request to the **primary** node instead of [handling it directly](https://gitlab.com/gitlab-org/gitlab/-/issues/1381), except when using Git over HTTP with credentials embedded within the URI. For example, `https://user:password@secondary.tld`.

doc/administration/geo/replication/object_storage.md

@@ -25,7 +25,7 @@ To have:
 
 > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/10586) in GitLab 12.4.
 
-CAUTION: **Caution:**
+WARNING:
 This is a [**beta** feature](https://about.gitlab.com/handbook/product/#beta) and is not ready yet for production use at any scale. The main limitations are a lack of testing at scale and no verification of any replicated data.
 
 **Secondary** nodes can replicate files stored on the **primary** node regardless of

doc/administration/geo/replication/troubleshooting.md

@@ -467,7 +467,7 @@ to start again from scratch, there are a few steps that can help you:
 
 1. _(Optional)_ Rename other data folders and create new ones
 
-   CAUTION: **Caution:**
+   WARNING:
    You may still have files on the **secondary** node that have been removed from **primary** node but
    removal have not been reflected. If you skip this step, they will never be removed
    from this Geo node.

doc/administration/geo/replication/updating_the_geo_nodes.md

@@ -7,7 +7,7 @@ type: howto
 
 # Updating the Geo nodes **(PREMIUM ONLY)**
 
-CAUTION: **Warning:**
+WARNING:
 Read these sections carefully before updating your Geo nodes. Not following
 version-specific update steps may result in unexpected downtime. If you have
 any specific questions, [contact Support](https://about.gitlab.com/support/#contact-support).

doc/administration/geo/replication/version_specific_updates.md

@@ -54,7 +54,7 @@ the recommended procedure, see the
 
 ## Updating to GitLab 12.9
 
-CAUTION: **Warning:**
+WARNING:
 GitLab 12.9.0 through GitLab 12.9.3 are affected by [a bug that stops
 repository verification](https://gitlab.com/gitlab-org/gitlab/-/issues/213523).
 The issue is fixed in GitLab 12.9.4. Upgrade to GitLab 12.9.4 or later.
@@ -203,14 +203,14 @@ For the recommended procedure, see the
 
 ## Updating to GitLab 12.0
 
-CAUTION: **Warning:**
+WARNING:
 This version is affected by a [bug that results in new LFS objects not being
 replicated to Geo secondary nodes](https://gitlab.com/gitlab-org/gitlab/-/issues/32696).
 The issue is fixed in GitLab 12.1; be sure to upgrade to GitLab 12.1 or later.
 
 ## Updating to GitLab 11.11
 
-CAUTION: **Warning:**
+WARNING:
 This version is affected by a [bug that results in new LFS objects not being
 replicated to Geo secondary nodes](https://gitlab.com/gitlab-org/gitlab/-/issues/32696).
 The issue is fixed in GitLab 12.1; be sure to upgrade to GitLab 12.1 or later.
@@ -376,7 +376,7 @@ the now-unused SSH keys from your secondaries, as they may cause problems if the
 
 ### Hashed Storage
 
-CAUTION: **Warning:**
+WARNING:
 Hashed storage is in **Alpha**. It is considered experimental and not
 production-ready. See [Hashed Storage](../../repository_storage_types.md) for more detail.
 
@@ -387,7 +387,7 @@ migrated we recommend leaving Hashed Storage enabled.
 
 ## Updating to GitLab 10.1
 
-CAUTION: **Warning:**
+WARNING:
 Hashed storage is in **Alpha**. It is considered experimental and not
 production-ready. See [Hashed Storage](../../repository_storage_types.md) for more detail.
 

doc/administration/geo/setup/database.md

@@ -44,7 +44,7 @@ The following guide assumes that:
   you have a new **secondary** server set up with the same versions of the OS,
   PostgreSQL, and GitLab on all nodes.
 
-CAUTION: **Warning:**
+WARNING:
 Geo works with streaming replication. Logical replication is not supported at this time.
 There is an [issue where support is being discussed](https://gitlab.com/gitlab-org/gitlab/-/issues/7420).
 
@@ -404,7 +404,7 @@ needed files for streaming replication.
 The directories used are the defaults that are set up in Omnibus. If you have
 changed any defaults, configure it as you see fit replacing the directories and paths.
 
-CAUTION: **Warning:**
+WARNING:
 Make sure to run this on the **secondary** server as it removes all PostgreSQL's
 data before running `pg_basebackup`.
 
@@ -421,7 +421,7 @@ data before running `pg_basebackup`.
 
 1. Execute the command below to start a backup/restore and begin the replication
 
-   CAUTION: **Warning:**
+   WARNING:
    Each Geo **secondary** node must have its own unique replication slot name.
    Using the same slot name between two secondaries will break PostgreSQL replication.
 

doc/administration/geo/setup/index.md

@@ -12,7 +12,7 @@ These instructions assume you have a working instance of GitLab. They guide you
 1. Making your existing instance the **primary** node.
 1. Adding **secondary** nodes.
 
-CAUTION: **Caution:**
+WARNING:
 The steps below should be followed in the order they appear. **Make sure the GitLab version is the same on all nodes.**
 
 ## Using Omnibus GitLab

doc/administration/git_annex.md

@@ -8,7 +8,7 @@ disqus_identifier: 'https://docs.gitlab.com/ee/workflow/git_annex.html'
 
 # Git annex
 
-CAUTION: **Warning:**
+WARNING:
 [Git Annex support was removed](https://gitlab.com/gitlab-org/gitlab/-/issues/1648)
 in GitLab 9.0. Read through the [migration guide from git-annex to Git LFS](../topics/git/lfs/migrate_from_git_annex_to_git_lfs.md).
 

doc/administration/gitaly/index.md

@@ -22,7 +22,7 @@ In the Gitaly documentation:
 GitLab end users do not have direct access to Gitaly. Gitaly only manages Git
 repository access for GitLab. Other types of GitLab data aren't accessed using Gitaly.
 
-CAUTION: **Caution:**
+WARNING:
 From GitLab 13.0, Gitaly support for NFS is deprecated. As of GitLab 14.0, NFS-related issues
 with Gitaly will no longer be addressed. Upgrade to [Gitaly Cluster](praefect.md) as soon as
 possible. Watch for [tools to enable bulk move](https://gitlab.com/groups/gitlab-org/-/epics/4916)
@@ -915,7 +915,7 @@ your Gitaly servers as follows:
 gitaly['auth_transitioning'] = false
 ```
 
-CAUTION: **Caution:**
+WARNING:
 Without completing this step, you have **no Gitaly authentication**.
 
 ### Verify authentication is enforced

doc/administration/gitaly/praefect.md

@@ -398,7 +398,7 @@ application server, or a Gitaly node.
    so we use `default` here as well. This cluster has three Gitaly nodes `gitaly-1`,
    `gitaly-2`, and `gitaly-3`, which are intended to be replicas of each other.
 
-   CAUTION: **Caution:**
+   WARNING:
    If you have data on an already existing storage called
    `default`, you should configure the virtual storage with another name and
    [migrate the data to the Gitaly Cluster storage](#migrate-existing-repositories-to-gitaly-cluster)
@@ -817,7 +817,7 @@ Particular attention should be shown to:
 1. Disable the default Gitaly service running on the GitLab host. It isn't needed
    because GitLab connects to the configured cluster.
 
-   CAUTION: **Caution:**
+   WARNING:
    If you have existing data stored on the default Gitaly storage,
    you should [migrate the data your Gitaly Cluster storage](#migrate-existing-repositories-to-gitaly-cluster)
    first.
@@ -1214,7 +1214,7 @@ Praefect provides the following subcommands to re-enable writes:
   sudo /opt/gitlab/embedded/bin/praefect -config /var/opt/gitlab/praefect/config.toml accept-dataloss -virtual-storage <virtual-storage> -repository <relative-path> -authoritative-storage <storage-name>
   ```
 
-CAUTION: **Caution:**
+WARNING:
 `accept-dataloss` causes permanent data loss by overwriting other versions of the repository. Data
 [recovery efforts](#data-recovery) must be performed before using it.
 

doc/administration/gitaly/reference.md

@@ -66,7 +66,7 @@ token = "the secret token"
 transitioning = true
 ```
 
-CAUTION: **Warning:**
+WARNING:
 Remember to disable `transitioning` when you are done
 changing your token settings.
 

doc/administration/incoming_email.md

@@ -85,7 +85,7 @@ To set up a basic Postfix mail server with IMAP access on Ubuntu, follow the
 
 ### Security concerns
 
-CAUTION: **Caution:**
+WARNING:
 Be careful when choosing the domain used for receiving incoming email.
 
 For example, suppose your top-level company domain is `hooli.com`.
@@ -112,7 +112,7 @@ Alternatively, use a dedicated domain for GitLab email communications such as
 See GitLab issue [#30366](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/30366)
 for a real-world example of this exploit.
 
-CAUTION: **Caution:**
+WARNING:
 Use a mail server that has been configured to reduce
 spam.
 A Postfix mail server that is running on a default configuration, for example,

doc/administration/index.md

@@ -219,7 +219,7 @@ information useful for troubleshooting, but if you are experiencing trouble with
 GitLab instance, you should check your [support options](https://about.gitlab.com/support/)
 before referring to these documents.
 
-CAUTION: **Warning:**
+WARNING:
 Using the commands listed in the documentation below could result in data loss or
 other damage to a GitLab instance, and should only be used by experienced administrators
 who are aware of the risks.

doc/administration/job_artifacts.md

@@ -190,7 +190,7 @@ _The artifacts are stored by default in
    In some cases, you may need to run the [orphan artifact file cleanup Rake task](../raketasks/cleanup.md#remove-orphan-artifact-files)
    to clean up orphaned artifacts.
 
-CAUTION: **Caution:**
+WARNING:
 JUnit test report artifact (`junit.xml.gz`) migration
 [was not supported until GitLab 12.8](https://gitlab.com/gitlab-org/gitlab/-/issues/27698#note_317190991)
 by the `gitlab:artifacts:migrate` script.
@@ -243,7 +243,7 @@ _The artifacts are stored by default in
    In some cases, you may need to run the [orphan artifact file cleanup Rake task](../raketasks/cleanup.md#remove-orphan-artifact-files)
    to clean up orphaned artifacts.
 
-CAUTION: **Caution:**
+WARNING:
 JUnit test report artifact (`junit.xml.gz`) migration
 [was not supported until GitLab 12.8](https://gitlab.com/gitlab-org/gitlab/-/issues/27698#note_317190991)
 by the `gitlab:artifacts:migrate` script.
@@ -481,7 +481,7 @@ the number you want.
 
 #### Delete job artifacts from jobs completed before a specific date
 
-CAUTION: **Caution:**
+WARNING:
 These commands remove data permanently from the database and from disk. We
 highly recommend running them only under the guidance of a Support Engineer, or
 running them in a test environment with a backup of the instance ready to be
@@ -528,7 +528,7 @@ If you need to manually remove job artifacts associated with multiple jobs while
 
 #### Delete job artifacts and logs from jobs completed before a specific date
 
-CAUTION: **Caution:**
+WARNING:
 These commands remove data permanently from the database and from disk. We
 highly recommend running them only under the guidance of a Support Engineer, or
 running them in a test environment with a backup of the instance ready to be

doc/administration/merge_request_diffs.md

@@ -67,7 +67,7 @@ that only [stores outdated diffs](#alternative-in-database-storage) outside of d
 
 ## Using object storage
 
-CAUTION: **Warning:**
+WARNING:
 Currently migrating to object storage is **non-reversible**
 
 Instead of storing the external diffs on disk, we recommended the use of an object

doc/administration/monitoring/gitlab_self_monitoring_project/index.md

@@ -38,7 +38,7 @@ metrics exposed by the [GitLab exporter](../prometheus/gitlab_metrics.md#metrics
 
 ## Deleting the self monitoring project
 
-CAUTION: **Warning:**
+WARNING:
 Deleting the self monitoring project removes any changes made to the project. If
 you create the project again, it's created in its default state.
 

doc/administration/monitoring/prometheus/index.md

@@ -53,7 +53,7 @@ To disable Prometheus and all of its exporters, as well as any added in the futu
 
 ### Changing the port and address Prometheus listens on
 
-CAUTION: **Caution:**
+WARNING:
 The following change was added in [Omnibus GitLab 8.17](https://gitlab.com/gitlab-org/omnibus-gitlab/-/merge_requests/1261). Although possible,
 it's not recommended to change the port Prometheus listens
 on, as this might affect or conflict with other services running on the GitLab
@@ -183,7 +183,7 @@ ensure that `prometheus['scrape_configs']` is not set in `/etc/gitlab/gitlab.rb`
 
 ### Using an external Prometheus server
 
-CAUTION: **Caution:**
+WARNING:
 Prometheus and most exporters don't support authentication. We don't recommend exposing them outside the local network.
 
 A few configuration changes are required to allow GitLab to be monitored by an external Prometheus server. External servers are recommended for [GitLab deployments with multiple nodes](../../reference_architectures/index.md).

doc/administration/nfs.md

@@ -14,7 +14,7 @@ Pages](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/196).
 For data objects such as LFS, Uploads, Artifacts, etc., an [Object Storage service](object_storage.md)
 is recommended over NFS where possible, due to better performance.
 
-CAUTION: **Caution:**
+WARNING:
 From GitLab 13.0, using NFS for Git repositories is deprecated. In GitLab 14.0,
 support for NFS for Git repositories is scheduled to be removed. Upgrade to
 [Gitaly Cluster](gitaly/praefect.md) as soon as possible.
@@ -344,7 +344,7 @@ sudo ufw allow from <client_ip_address> to any port nfs
 
 ### Upgrade to Gitaly Cluster or disable caching if experiencing data loss
 
-CAUTION: **Caution:**
+WARNING:
 From GitLab 13.0, using NFS for Git repositories is deprecated. In GitLab 14.0,
 support for NFS for Git repositories is scheduled to be removed. Upgrade to
 [Gitaly Cluster](gitaly/praefect.md) as soon as possible.
@@ -358,7 +358,7 @@ For example, we have seen [inconsistent updates after a push](https://gitlab.com
 | `actimeo=0` | Sets the time to zero that the NFS client caches files and directories before requesting fresh information from a server. |
 | `noac` | Tells the NFS client not to cache file attributes and forces application writes to become synchronous so that local changes to a file become visible on the server immediately. |
 
-CAUTION: **Caution:**
+WARNING:
 The `actimeo=0` and `noac` options both result in a significant reduction in performance, possibly leading to timeouts.
 You may be able to avoid timeouts and data loss using `actimeo=0` and `lookupcache=positive` _without_ `noac`, however
 we expect the performance reduction will still be significant. As noted above, we strongly recommend upgrading to

doc/administration/operations/extra_sidekiq_processes.md

@@ -209,7 +209,7 @@ sidekiq['queue_groups'] = [
 
 ### Disable Sidekiq cluster
 
-CAUTION: **Warning:**
+WARNING:
 Sidekiq cluster is [scheduled](https://gitlab.com/gitlab-com/gl-infra/scalability/-/issues/240)
 to be the only way to start Sidekiq in GitLab 14.0.
 
@@ -341,7 +341,7 @@ being equal to `max_concurrency`.
 
 Running a single Sidekiq process is the default in GitLab 12.10 and earlier.
 
-CAUTION: **Warning:**
+WARNING:
 Running Sidekiq directly is scheduled to be removed in GitLab
 [14.0](https://gitlab.com/gitlab-com/gl-infra/scalability/-/issues/240).
 
@@ -376,7 +376,7 @@ This tells the additional processes how often to check for enqueued jobs.
 
 ## Troubleshoot using the CLI
 
-CAUTION: **Warning:**
+WARNING:
 It's recommended to use `/etc/gitlab/gitlab.rb` to configure the Sidekiq processes.
 If you experience a problem, you should contact GitLab support. Use the command
 line at your own risk.

doc/administration/operations/fast_ssh_key_lookup.md

@@ -91,7 +91,7 @@ You might want to consider creating a wrapper script somewhere else since this c
 owned by `root` and not be writable by group or others. You could also consider changing the ownership of this command
 as required, but that might require temporary ownership changes during `gitlab-shell` upgrades.
 
-CAUTION: **Caution:**
+WARNING:
 Do not disable writes until SSH is confirmed to be working
 perfectly, because the file will quickly become out-of-date.
 

doc/administration/operations/rails_console.md

@@ -9,7 +9,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 The [Rails console](https://guides.rubyonrails.org/command_line.html#rails-console).
 provides a way to interact with your GitLab instance from the command line.
 
-CAUTION: **Caution:**
+WARNING:
 The Rails console interacts directly with GitLab. In many cases,
 there are no handrails to prevent you from permanently modifying, corrupting
 or destroying production data. If you would like to explore the Rails console

doc/administration/packages/container_registry.md

@@ -93,7 +93,7 @@ auth:
     rootcertbundle: /root/certs/certbundle
 ```
 
-CAUTION: **Caution:**
+WARNING:
 If `auth` is not set up, users can pull Docker images without authentication.
 
 ## Container Registry domain configuration
@@ -374,7 +374,7 @@ driver for the Container Registry.
 
 [Read more about using object storage with GitLab](../object_storage.md).
 
-CAUTION: **Warning:**
+WARNING:
 GitLab does not back up Docker images that are not stored on the
 file system. Enable backups with your object storage provider if
 desired.

doc/administration/pages/index.md

@@ -395,7 +395,7 @@ To do that:
 1. Check the **Disable public access to Pages sites** checkbox.
 1. Click **Save changes**.
 
-CAUTION: **Warning:**
+WARNING:
 For self-managed installations, all public websites remain private until they are
 redeployed. This issue will be resolved by
 [sourcing domain configuration from the GitLab API](https://gitlab.com/gitlab-org/gitlab/-/issues/218357).

doc/administration/postgresql/replication_and_failover.md

@@ -985,7 +985,7 @@ after it has been restored to service.
   gitlab-ctl restart repmgrd
   ```
 
-  CAUTION: **Warning:**
+  WARNING:
   When the server is brought back online, and before
   you switch it to a standby node, repmgr will report that there are two masters.
   If there are any clients that are still attempting to write to the old master,
@@ -1326,7 +1326,7 @@ For further details, see [Patroni documentation on this subject](https://patroni
 
 ### Switching from repmgr to Patroni
 
-CAUTION: **Warning:**
+WARNING:
 Although switching from repmgr to Patroni is fairly straightforward the other way around is not. Rolling back from
 Patroni to repmgr can be complicated and may involve deletion of data directory. If you need to do that, please contact
 GitLab support.
@@ -1367,7 +1367,7 @@ As of GitLab 13.3, PostgreSQL 11.7 and 12.3 are both shipped with Omnibus GitLab
 uses PostgreSQL 11 by default. Therefore `gitlab-ctl pg-upgrade` does not automatically upgrade
 to PostgreSQL 12. If you want to upgrade to PostgreSQL 12, you must ask for it explicitly.
 
-CAUTION: **Warning:**
+WARNING:
 The procedure for upgrading PostgreSQL in a Patroni cluster is different than when upgrading using repmgr.
 The following outlines the key differences and important considerations that need to be accounted for when
 upgrading PostgreSQL.

doc/administration/pseudonymizer.md

@@ -12,7 +12,7 @@ As GitLab's database hosts sensitive information, using it unfiltered for analyt
 implies high security requirements. To help alleviate this constraint, the Pseudonymizer
 service is used to export GitLab's data in a pseudonymized way.
 
-CAUTION: **Warning:**
+WARNING:
 This process is not impervious. If the source data is available, it's possible for
 a user to correlate data to the pseudonymized version.
 

doc/administration/raketasks/uploads/migrate.md

@@ -131,7 +131,7 @@ sudo -u git -H bundle exec rake "gitlab:uploads:migrate[DesignManagement::Design
 If you need to disable [object storage](../../object_storage.md) for any reason, you must first
 migrate your data out of object storage and back into your local storage.
 
-CAUTION: **Warning:**
+WARNING:
 **Extended downtime is required** so no new files are created in object storage during
 the migration. A configuration setting is planned to allow migrating
 from object storage to local files with only a brief moment of downtime for configuration changes.

doc/administration/read_only_gitlab.md

@@ -6,7 +6,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 
 # Place GitLab into a read-only state **(CORE ONLY)**
 
-CAUTION: **Warning:**
+WARNING:
 This document should be used as a temporary solution.
 There's work in progress to make this
 [possible with Geo](https://gitlab.com/groups/gitlab-org/-/epics/2149).

doc/administration/smime_signing_email.md

@@ -26,7 +26,7 @@ files must be provided:
 Optionally, you can also provide a bundle of CA certs (PEM-encoded) to be
 included on each signature. This will typically be an intermediate CA.
 
-CAUTION: **Caution:**
+WARNING:
 Be mindful of the access levels for your private keys and visibility to
 third parties.
 

doc/administration/troubleshooting/gitlab_rails_cheat_sheet.md

@@ -14,13 +14,13 @@ having an issue with GitLab, it is highly recommended that you check your
 [support options](https://about.gitlab.com/support/) first, before attempting to use
 this information.
 
-CAUTION: **Caution:**
+WARNING:
 Please note that some of these scripts could be damaging if not run correctly,
 or under the right conditions. We highly recommend running them under the
 guidance of a Support Engineer, or running them in a test environment with a
 backup of the instance ready to be restored, just in case.
 
-CAUTION: **Caution:**
+WARNING:
 Please also note that as GitLab changes, changes to the code are inevitable,
 and so some scripts may not work as they once used to. These are not kept
 up-to-date as these scripts/commands were added as they were found/needed. As
@@ -308,7 +308,7 @@ pp p.statistics  # compare with earlier values
 
 ### Recreate
 
-CAUTION: **Caution:**
+WARNING:
 This is a destructive operation, the Wiki will be empty.
 
 A Projects Wiki can be recreated by this command:

doc/administration/troubleshooting/group_saml_scim.md

@@ -22,7 +22,7 @@ This section includes relevant screenshots of the following example configuratio
 - [Azure Active Directory](#azure-active-directory)
 - [OneLogin](#onelogin)
 
-CAUTION: **Caution:**
+WARNING:
 These screenshots are updated only as needed by GitLab Support. They are **not** official documentation.
 
 If you are currently having an issue with GitLab, you may want to check your [support options](https://about.gitlab.com/support/).

doc/administration/troubleshooting/kubernetes_cheat_sheet.md

@@ -11,7 +11,7 @@ This is a list of useful information regarding Kubernetes that the GitLab Suppor
 Team sometimes uses while troubleshooting. GitLab is making this public, so that anyone
 can make use of the Support team's collected knowledge
 
-CAUTION: **Caution:**
+WARNING:
 These commands **can alter or break** your Kubernetes components so use these at your own risk.
 
 If you are on a [paid tier](https://about.gitlab.com/pricing/) and are not sure how

doc/administration/troubleshooting/linux_cheat_sheet.md

@@ -13,7 +13,7 @@ and it may be useful for users with experience with Linux. If you are currently
 having an issue with GitLab, you may want to check your [support options](https://about.gitlab.com/support/)
 first, before attempting to use this information.
 
-CAUTION: **Caution:**
+WARNING:
 If you are administering GitLab you are expected to know these commands for your distribution
 of choice. If you are a GitLab Support Engineer, consider this a cross-reference to
 translate `yum` -> `apt-get` and the like.

doc/administration/troubleshooting/navigating_gitlab_via_rails_console.md

@@ -12,7 +12,7 @@ Thanks to this, we also get access to the amazing tools built right into Rails.
 In this guide, we'll introduce the [Rails console](../operations/rails_console.md#starting-a-rails-console-session)
 and the basics of interacting with your GitLab instance from the command line.
 
-CAUTION: **Caution:**
+WARNING:
 The Rails console interacts directly with your GitLab instance. In many cases,
 there are no handrails to prevent you from permanently modifying, corrupting
 or destroying production data. If you would like to explore the Rails console

doc/administration/troubleshooting/postgresql.md

@@ -11,7 +11,7 @@ This page contains information about PostgreSQL the GitLab Support team uses
 when troubleshooting. GitLab makes this information public, so that anyone can
 make use of the Support team's collected knowledge.
 
-CAUTION: **Caution:**
+WARNING:
 Some procedures documented here may break your GitLab instance. Use at your
 own risk.
 

doc/api/README.md

@@ -478,7 +478,7 @@ Status: 200 OK
 ...
 ```
 
-CAUTION: **Deprecation:**
+WARNING:
 The `Links` header is scheduled to be removed in GitLab 14.0 to be aligned with the
 [W3C `Link` specification](https://www.w3.org/wiki/LinkHeader). The `Link`
 header was [added in GitLab 13.1](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/33714)

doc/api/dependencies.md

@@ -6,7 +6,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 
 # Dependencies API **(ULTIMATE)**
 
-CAUTION: **Caution:**
+WARNING:
 This API is in an alpha stage and considered unstable.
 The response payload may be subject to change or breakage
 across GitLab releases.

doc/api/dependency_proxy.md

@@ -13,7 +13,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 
 Deletes the cached blobs for a group. This endpoint requires group admin access.
 
-CAUTION: **Warning:**
+WARNING:
 [A bug exists](https://gitlab.com/gitlab-org/gitlab/-/issues/277161) for this API.
 
 ```plaintext

doc/api/epics.md

@@ -38,7 +38,7 @@ are paginated.
 
 Read more on [pagination](README.md#pagination).
 
-CAUTION: **Deprecation:**
+WARNING:
 > `reference` attribute in response is deprecated in favour of `references`.
 > Introduced [GitLab 12.6](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/20354)
 

doc/api/feature_flag_specs.md

@@ -8,7 +8,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 
 > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/9566) in [GitLab Premium](https://about.gitlab.com/pricing/) 12.5.
 
-CAUTION: **Deprecation:**
+WARNING:
 This API is deprecated and [scheduled for removal in GitLab 14.0](https://gitlab.com/gitlab-org/gitlab/-/issues/213369).
 
 The API for creating, updating, reading and deleting Feature Flag Specs.

doc/api/feature_flags_legacy.md

@@ -10,7 +10,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 > - [Moved](https://gitlab.com/gitlab-org/gitlab/-/issues/212318) to [GitLab Starter](https://about.gitlab.com/pricing/) in 13.4.
 > - [Moved](https://gitlab.com/gitlab-org/gitlab/-/issues/212318) to [GitLab Core](https://about.gitlab.com/pricing/) in 13.5.
 
-CAUTION: **Deprecation:**
+WARNING:
 This API is deprecated and [scheduled for removal in GitLab 14.0](https://gitlab.com/gitlab-org/gitlab/-/issues/213369). Use [this API](feature_flags.md) instead.
 
 API for accessing resources of [GitLab Feature Flags](../operations/feature_flags.md).

doc/api/invitations.md

@@ -21,7 +21,7 @@ levels are defined in the `Gitlab::Access` module. Currently, these levels are v
 - Maintainer (`40`)
 - Owner (`50`) - Only valid to set for groups
 
-CAUTION: **Caution:**
+WARNING:
 Due to [an issue](https://gitlab.com/gitlab-org/gitlab/-/issues/219299),
 projects in personal namespaces don't show owner (`50`) permission.
 

doc/api/members.md

@@ -17,7 +17,7 @@ The access levels are defined in the `Gitlab::Access` module. Currently, these l
 - Maintainer (`40`)
 - Owner (`50`) - Only valid to set for groups
 
-CAUTION: **Caution:**
+WARNING:
 Due to [an issue](https://gitlab.com/gitlab-org/gitlab/-/issues/219299),
 projects in personal namespaces don't show owner (`50`) permission
 for owner.
@@ -89,7 +89,7 @@ Example response:
 
 Gets a list of group or project members viewable by the authenticated user, including inherited members and permissions through ancestor groups.
 
-CAUTION: **Caution:**
+WARNING:
 Due to [an issue](https://gitlab.com/gitlab-org/gitlab/-/issues/249523), the users effective `access_level` may actually be higher than returned value when listing group members.
 
 This function takes pagination parameters `page` and `per_page` to restrict the list of users.

doc/api/merge_requests.md

@@ -9,7 +9,7 @@ type: reference, api
 
 Every API call to merge requests must be authenticated.
 
-CAUTION: **Deprecation:**
+WARNING:
 > `reference` attribute in response is deprecated in favour of `references`.
 > Introduced [GitLab 12.6](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/20354)
 

doc/api/oauth2.md

@@ -117,7 +117,7 @@ NOTE: **Note:**
 Check the [RFC spec](https://tools.ietf.org/html/rfc6749#section-4.2) for a
 detailed flow description.
 
-CAUTION: **Important:**
+WARNING:
 Avoid using this flow for applications that store data outside of the GitLab
 instance. If you do, make sure to verify `application id` associated with the
 access token before granting access to the data
@@ -169,7 +169,7 @@ The credentials should only be used when:
   privileged application.
 - Other authorization grant types are not available (such as an authorization code).
 
-CAUTION: **Important:**
+WARNING:
 Never store the user's credentials and only use this grant type when your client
 is deployed to a trusted environment, in 99% of cases
 [personal access tokens](../user/profile/personal_access_tokens.md) are a better

doc/api/project_repository_storage_moves.md

@@ -197,7 +197,7 @@ Example response:
 > - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/34119) in GitLab 13.1.
 > - [Introduced](https://gitlab.com/gitlab-org/gitaly/-/issues/2618) in GitLab 13.3, original repository is automatically removed after successful move and integrity check.
 
-CAUTION: **Caution:**
+WARNING:
 Before GitLab 13.3, a repository move worked more like a repository copy as the
 original repository was not deleted from the original storage disk location and
 had to be manually cleaned up.

doc/api/project_vulnerabilities.md

@@ -9,7 +9,7 @@ type: reference, api
 
 > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/10242) in [GitLab Ultimate](https://about.gitlab.com/pricing/) 12.6.
 
-CAUTION: **Caution:**
+WARNING:
 This API is in an alpha stage and considered unstable.
 The response payload may be subject to change or breakage
 across GitLab releases.

doc/api/projects.md

@@ -1862,7 +1862,7 @@ This endpoint:
   actual deletion happens after the number of days specified in the
   [default deletion delay](../user/admin_area/settings/visibility_and_access_controls.md#default-deletion-delay).
 
-CAUTION: **Warning:**
+WARNING:
 The default behavior of [Delayed Project deletion](https://gitlab.com/gitlab-org/gitlab/-/issues/32935)
 in GitLab 12.6 was changed to [Immediate deletion](https://gitlab.com/gitlab-org/gitlab/-/issues/220382)
 in GitLab 13.2, as discussed in [Enabling delayed project removal](../user/group/index.md#enabling-delayed-project-removal).

doc/api/repositories.md

@@ -202,7 +202,7 @@ authentication if the repository is publicly accessible.
 GET /projects/:id/repository/contributors
 ```
 
-CAUTION: **Deprecation:**
+WARNING:
 The `additions` and `deletions` attributes are deprecated [as of GitLab 13.4](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/39653) because they [always return `0`](https://gitlab.com/gitlab-org/gitlab/-/issues/233119).
 
 Parameters:

doc/api/users.md

@@ -1486,7 +1486,7 @@ Parameters:
 > - It's [deployed behind a feature flag](../user/feature_flags.md), disabled by default.
 > - To use it in GitLab self-managed instances, ask a GitLab administrator to [enable it](#enable-or-disable-an-administrators-ability-to-use-the-api-to-create-personal-access-tokens). **(CORE)**
 
-CAUTION: **Warning:**
+WARNING:
 This feature might not be available to you. Check the **version history** note above for details.
 
 > Requires admin permissions.

doc/api/vulnerabilities.md

@@ -14,7 +14,7 @@ and its documentation was moved to [a different location](vulnerability_findings
 This document now describes the new Vulnerabilities API that provides access to
 [Vulnerabilities](https://gitlab.com/groups/gitlab-org/-/epics/634).
 
-CAUTION: **Caution:**
+WARNING:
 This API is in an alpha stage and considered unstable.
 The response payload may be subject to change or breakage
 across GitLab releases.

doc/api/vulnerability_exports.md

@@ -8,7 +8,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 
 > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/197494) in [GitLab Ultimate](https://about.gitlab.com/pricing/) 12.10. [Updated](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/30397) in [GitLab Ultimate](https://about.gitlab.com/pricing/) 13.0.
 
-CAUTION: **Caution:**
+WARNING:
 This API is in an alpha stage and considered unstable.
 The response payload may be subject to change or breakage
 across GitLab releases.

doc/api/vulnerability_findings.md

@@ -24,7 +24,7 @@ If a user is able to access the project but does not have permission to
 [use the Project Security Dashboard](../user/permissions.md#project-members-permissions),
 any request for vulnerability findings of this project results in a `403` status code.
 
-CAUTION: **Caution:**
+WARNING:
 This API is in an alpha stage and considered unstable.
 The response payload may be subject to change or breakage
 across GitLab releases.
@@ -53,7 +53,7 @@ GET /projects/:id/vulnerability_findings?scanner=bandit,find_sec_bugs
 GET /projects/:id/vulnerability_findings?pipeline_id=42
 ```
 
-CAUTION: **Deprecation:**
+WARNING:
 Beginning with GitLab 12.9, the `undefined` severity and confidence level is no longer reported.
 
 | Attribute     | Type           | Required | Description                                                                                                                                                                         |

doc/ci/cloud_deployment/index.md

@@ -149,7 +149,7 @@ After you have these prerequisites ready, follow these steps:
    In both cases, make sure that the value for the `containerDefinitions[].name` attribute is
    the same as the `Container name` defined in your targeted ECS service.
 
-   CAUTION: **Warning:**
+   WARNING:
    `CI_AWS_ECS_TASK_DEFINITION_FILE` takes precedence over `CI_AWS_ECS_TASK_DEFINITION` if both these environment
    variables are defined within your project.
 
@@ -181,7 +181,7 @@ After you have these prerequisites ready, follow these steps:
    task definition, making the cluster pull the newest version of your
    application.
 
-CAUTION: **Warning:**
+WARNING:
 The [`AWS/Deploy-ECS.gitlab-ci.yml`](https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/gitlab/ci/templates/AWS/Deploy-ECS.gitlab-ci.yml)
 template includes both the [`Jobs/Build.gitlab-ci.yml`](https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/gitlab/ci/templates/Jobs/Build.gitlab-ci.yml)
 and [`Jobs/Deploy/ECS.gitlab-ci.yml`](https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/gitlab/ci/templates/Jobs/Deploy/ECS.gitlab-ci.yml)

doc/ci/environments/index.md

@@ -121,7 +121,7 @@ Note that the `environment` keyword defines where the app is deployed. The envir
 `url` is exposed in various places within GitLab. Each time a job that has an environment specified
 succeeds, a deployment is recorded along with the Git SHA and environment name.
 
-CAUTION: **Caution:**
+WARNING:
 Some characters are not allowed in environment names. Use only letters,
 numbers, spaces, and `-`, `_`, `/`, `{`, `}`, or `.`. Also, it must not start nor end with `/`.
 

doc/ci/examples/authenticating-with-hashicorp-vault/index.md

@@ -66,7 +66,7 @@ To communicate with Vault, you can use either its CLI client or perform API requ
 
 ## Example
 
-CAUTION: **Caution:**
+WARNING:
 JWTs are credentials, which can grant access to resources. Be careful where you paste them!
 
 Let's say you have the passwords for your staging and production databases stored in a Vault server that is running on `http://vault.example.com:8200`. Your staging password is `pa$$w0rd` and your production password is `real-pa$$w0rd`.
@@ -162,7 +162,7 @@ Combined with GitLab's [protected branches](../../../user/project/protected_bran
 
 For the full list of options, see Vault's [Create Role documentation](https://www.vaultproject.io/api/auth/jwt#create-role).
 
-CAUTION: **Caution:**
+WARNING:
 Always restrict your roles to project or namespace by using one of the provided claims (e.g. `project_id` or `namespace_id`). Otherwise any JWT generated by this instance may be allowed to authenticate using this role.
 
 Now, configure the JWT Authentication method:

doc/ci/examples/deploy_spring_boot_to_cloud_foundry/index.md

@@ -116,7 +116,7 @@ After set up, GitLab CI/CD deploys your app to CF at every push to your
 repository's default branch. To review the build logs or watch your builds
 running live, navigate to **CI/CD > Pipelines**.
 
-CAUTION: **Caution:**
+WARNING:
 It's considered best practice for security to create a separate deploy user for
 your application and add its credentials to GitLab instead of using a
 developer's credentials.

doc/ci/merge_request_pipelines/index.md

@@ -188,7 +188,7 @@ can create pipelines in the parent project for merge requests
 from a forked project. In the merge request, go to the **Pipelines** and click
 **Run Pipeline** button.
 
-CAUTION: **Caution:**
+WARNING:
 Fork merge requests could contain malicious code that tries to steal secrets in the
 parent project when the pipeline runs, even before merge. Reviewers must carefully
 check the changes in the merge request before triggering the pipeline. GitLab shows

doc/ci/merge_request_pipelines/pipelines_for_merged_results/index.md

@@ -59,7 +59,7 @@ To enable pipelines for merged results for your project:
 1. Check **Enable merged results pipelines.**.
 1. Click **Save changes**.
 
-CAUTION: **Caution:**
+WARNING:
 If you select the check box but don't configure your CI/CD to use
 pipelines for merge requests, your merge requests may become stuck in an
 unresolved state or your pipelines may be dropped.

doc/ci/merge_request_pipelines/pipelines_for_merged_results/merge_trains/index.md

@@ -90,7 +90,7 @@ To enable merge trains for your project:
 In GitLab 13.5 and earlier, there is only one checkbox, named
 **Enable merge trains and pipelines for merged results**.
 
-CAUTION: **Caution:**
+WARNING:
 If you select the check box but don't configure your CI/CD to use
 pipelines for merge requests, your merge requests may become stuck in an
 unresolved state or your pipelines may be dropped.
@@ -143,7 +143,7 @@ This is the fastest option to get the change merged into the target branch.
 
 ![Merge Immediately](img/merge_train_immediate_merge_v12_6.png)
 
-CAUTION: **Caution:**
+WARNING:
 Each time you merge a merge request immediately, the current merge train
 is recreated and all pipelines restart.
 

doc/ci/pipelines/index.md

@@ -213,7 +213,7 @@ page, then using the **Delete** button.
 
 ![Pipeline Delete Button](img/pipeline-delete.png)
 
-CAUTION: **Warning:**
+WARNING:
 Deleting a pipeline expires all pipeline caches, and deletes all related objects,
 such as builds, logs, artifacts, and triggers. **This action cannot be undone.**
 

doc/ci/pipelines/job_artifacts.md

@@ -229,7 +229,7 @@ requests and the pipeline view. It's also used to provide data for security dash
 > - Introduced in GitLab 11.5.
 > - Requires GitLab Runner 11.5 and above.
 
-CAUTION: **Warning:**
+WARNING:
 This artifact is still valid but is **deprecated** in favor of the
 [artifacts:reports:license_scanning](../pipelines/job_artifacts.md#artifactsreportslicense_scanning)
 introduced in GitLab 12.8.

doc/ci/secrets/index.md

@@ -155,7 +155,7 @@ $ vault write auth/jwt/role/myproject-production - <<EOF
 EOF
 ```
 
-CAUTION: **Caution:**
+WARNING:
 Always restrict your roles to a project or namespace by using one of the provided
 claims like `project_id` or `namespace_id`. Without these restrictions, any JWT
 generated by this GitLab instance may be allowed to authenticate using this role.

doc/ci/variables/README.md

@@ -243,7 +243,7 @@ Some variables are listed in the UI so you can choose them more quickly.
 | `AWS_DEFAULT_REGION`    | Any                                                | 12.10         |
 | `AWS_SECRET_ACCESS_KEY` | Any                                                | 12.10         |
 
-CAUTION: **Caution:**
+WARNING:
 When you store credentials, there are security implications. If you are using AWS keys,
 for example, follow their [best practices](https://docs.aws.amazon.com/general/latest/gr/aws-access-keys-best-practices.html).
 
@@ -590,7 +590,7 @@ variables](../../topics/autodevops/customize.md#application-secret-variables) ar
 then available as environment variables on the running application
 container.
 
-CAUTION: **Caution:**
+WARNING:
 Variables with multi-line values are not supported due to
 limitations with the Auto DevOps scripting environment.
 
@@ -825,7 +825,7 @@ testvariable:
 
 > Introduced in GitLab Runner 1.7.
 
-CAUTION: **Warning:**
+WARNING:
 Enabling debug tracing can have severe security implications. The
 output **will** contain the content of all your variables and any other
 secrets! The output **will** be uploaded to the GitLab server and made visible

doc/ci/yaml/README.md

@@ -1079,7 +1079,7 @@ job:
 - If the pipeline is a scheduled pipeline, the job is **not** be added to the pipeline.
 - In **all other cases**, the job is added to the pipeline, with `when: on_success`.
 
-CAUTION: **Caution:**
+WARNING:
 If you use a `when:` clause as the final rule (not including `when: never`), two
 simultaneous pipelines may start. Both push pipelines and merge request pipelines can
 be triggered by the same event (a push to the source branch for an open merge request).
@@ -1330,7 +1330,7 @@ rules:
 To implement a rule similar to [`except:changes`](#onlychangesexceptchanges),
 use `when: never`.
 
-CAUTION: **Caution:**
+WARNING:
 You can use `rules: changes` with other pipeline types, but it is not recommended
 because `rules: changes` always evaluates to true when there is no Git `push` event.
 Tag pipelines, scheduled pipelines, and so on do **not** have a Git `push` event
@@ -1450,7 +1450,7 @@ job1:
     if: ($CI_COMMIT_BRANCH == "master" || $CI_COMMIT_BRANCH == "develop") && $MY_VARIABLE
 ```
 
-CAUTION: **Caution:**
+WARNING:
 [Before GitLab 13.3](https://gitlab.com/gitlab-org/gitlab/-/issues/230938),
 rules that use both `||` and `&&` may evaluate with an unexpected order of operations.
 
@@ -1758,7 +1758,7 @@ refs only:
 - `external_pull_requests`
 - `merge_requests` (see additional details about [using `only:changes` with pipelines for merge requests](#using-onlychanges-with-pipelines-for-merge-requests))
 
-CAUTION: **Caution:**
+WARNING:
 In pipelines with [sources other than the three above](../variables/predefined_variables.md)
 `changes` can't determine if a given file is new or old and always returns `true`.
 You can configure jobs to use `only: changes` with other `only: refs` keywords. However,
@@ -1787,7 +1787,7 @@ the `docker build` job is created, but only if changes were made to any of the f
 - Any of the files and subdirectories in the `dockerfiles` directory.
 - Any of the files with `rb`, `py`, `sh` extensions in the `more_scripts` directory.
 
-CAUTION: **Warning:**
+WARNING:
 If you use `only:changes` with [only allow merge requests to be merged if the pipeline succeeds](../../user/project/merge_requests/merge_when_pipeline_succeeds.md#only-allow-merge-requests-to-be-merged-if-the-pipeline-succeeds),
 you should [also use `only:merge_requests`](#using-onlychanges-with-pipelines-for-merge-requests). Otherwise it may not work as expected.
 
@@ -3423,7 +3423,7 @@ test:
     - bundle exec rspec_booster --job $CI_NODE_INDEX/$CI_NODE_TOTAL
 ```
 
-CAUTION: **Caution:**
+WARNING:
 Test Boosters reports usage statistics to the author.
 
 You can then navigate to the **Jobs** tab of a new pipeline build and see your RSpec

doc/ci/yaml/script.md

@@ -19,7 +19,7 @@ You can use special syntax in [`script`](README.md#script) sections to:
 You can split long commands into multiline commands to improve readability with
 `|` (literal) and `>` (folded) [YAML multiline block scalar indicators](https://yaml-multiline.info/).
 
-CAUTION: **Warning:**
+WARNING:
 If multiple commands are combined into one command string, only the last command's
 failure or success is reported.
 [Failures from earlier commands are ignored due to a bug](https://gitlab.com/gitlab-org/gitlab-runner/-/issues/25394).

doc/ci/yaml/visualization.md

@@ -12,7 +12,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 > - It's not recommended for production use.
 > - To use it in GitLab self-managed instances, ask a GitLab administrator to [enable it](#enable-or-disable-cicd-configuration-visualization). **(CORE ONLY)**
 
-CAUTION: **Warning:**
+WARNING:
 This feature might not be available to you. Check the **version history** note above for details.
 
 To see a visualization of your `gitlab-ci.yml` configuration, navigate to any CI/CD

doc/development/api_graphql_styleguide.md

@@ -353,7 +353,7 @@ when the flag is disabled.
 A description is [appended](https://gitlab.com/gitlab-org/gitlab/-/blob/497b556/app/graphql/types/base_field.rb#L44-53)
 to the field indicating that it is behind a feature flag.
 
-CAUTION: **Caution:**
+WARNING:
 If a client queries for the field when the feature flag is disabled, the query
 fails. Consider this when toggling the visibility of the feature on or off on
 production.

doc/development/bulk_import.md

@@ -8,7 +8,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 
 [Introduced](https://gitlab.com/groups/gitlab-org/-/epics/2771) in GitLab 13.7.
 
-CAUTION: **Caution:**
+WARNING:
 This feature is [under construction](https://gitlab.com/groups/gitlab-org/-/epics/2771) and its API/Architecture might change in the future.
 
 GitLab Group Migration is the evolution of Project and Group Import functionality. The

doc/development/database/add_foreign_key_to_existing_column.md

@@ -79,7 +79,7 @@ class AddNotValidForeignKeyToEmailsUser < ActiveRecord::Migration[5.2]
 end
 ```
 
-CAUTION: **Caution:**
+WARNING:
 Avoid using the `add_foreign_key` constraint more than once per migration file, unless the source and target tables are identical.
 
 #### Data migration to fix existing records

doc/development/documentation/feature_flags.md

@@ -65,7 +65,7 @@ be enabled for a single project, and is not ready for production use:
 > - It's not recommended for production use.
 > - To use it in GitLab self-managed instances, ask a GitLab administrator to [enable it](#anchor-to-section). **(CORE ONLY)**
 
-CAUTION: **Warning:**
+WARNING:
 This feature might not be available to you. Check the **version history** note above for details.
 
 (...Regular content goes here...)
@@ -124,7 +124,7 @@ use:
 > - It's recommended for production use.
 > - For GitLab self-managed instances, GitLab administrators can opt to [disable it](#anchor-to-section). **(CORE ONLY)**
 
-CAUTION: **Warning:**
+WARNING:
 This feature might not be available to you. Check the **version history** note above for details.
 
 (...Regular content goes here...)
@@ -180,7 +180,7 @@ cannot be enabled for a single project, and is ready for production use:
 > - It's recommended for production use.
 > - For GitLab self-managed instances, GitLab administrators can opt to [disable it](#anchor-to-section). **(CORE ONLY)**
 
-CAUTION: **Warning:**
+WARNING:
 This feature might not be available to you. Check the **version history** note above for details.
 
 (...Regular content goes here...)
@@ -253,7 +253,7 @@ be enabled by project, and is ready for production use:
 > - It's recommended for production use.
 > - For GitLab self-managed instances, GitLab administrators can opt to [disable it](#anchor-to-section). **(CORE ONLY)**
 
-CAUTION: **Warning:**
+WARNING:
 This feature might not be available to you. Check the **version history** note above for details.
 
 (...Regular content goes here...)

doc/development/documentation/restful_api_styleguide.md

@@ -110,7 +110,7 @@ Rendered example:
 The following sections include a set of [cURL](https://curl.se/) examples
 you can use in the API documentation.
 
-CAUTION: **Caution:**
+WARNING:
 Do not use information for real users, URLs, or tokens. For documentation, refer to our
 relevant style guide sections on [Fake user information](styleguide/index.md#fake-user-information),
 [Fake URLs](styleguide/index.md#fake-urls), and [Fake tokens](styleguide/index.md#fake-tokens).

doc/development/documentation/site_architecture/deployment_process.md

@@ -46,7 +46,7 @@ for the version in question.
 
 ## Porting new website changes to old versions
 
-CAUTION: **Warning:**
+WARNING:
 Porting changes to older branches can have unintended effects as we're constantly
 changing the backend of the website. Use only when you know what you're doing
 and make sure to test locally.

doc/development/documentation/site_architecture/global_nav.md

@@ -292,7 +292,7 @@ and the following syntax rules.
   an "information" icon on the nav to make the user aware that the feature is
   EE-only.
 
-CAUTION: **Caution:**
+WARNING:
 All links present on the data file must end in `.html`, not `.md`. Do not
 start any relative link with a forward slash `/`.
 

doc/development/documentation/site_architecture/index.md

@@ -114,7 +114,7 @@ located in the [Dockerfiles directory](https://gitlab.com/gitlab-org/gitlab-docs
 
 If you need to rebuild the Docker images immediately (must have maintainer level permissions):
 
-CAUTION: **Caution:**
+WARNING:
 If you change the dockerfile configuration and rebuild the images, you can break the master
 pipeline in the main `gitlab` repository as well as in `gitlab-docs`. Create an image with
 a different name first and test it to ensure you do not break the pipelines.

doc/development/fe_guide/tooling.md

@@ -46,7 +46,7 @@ yarn eslint-fix
 
 If manual changes are required, a list of changes will be sent to the console.
 
-CAUTION: **Caution:**
+WARNING:
 Limit use to global rule updates. Otherwise, the changes can lead to huge Merge Requests.
 
 ### Disabling ESLint in new files

doc/development/feature_flags/development.md

@@ -17,7 +17,7 @@ request removing the feature flag or the merge request where the default value o
 the feature flag is set to enabled. If the feature contains any database migrations, it
 *should* include a changelog entry for the database changes.
 
-CAUTION: **Caution:**
+WARNING:
 All newly-introduced feature flags should be [disabled by default](process.md#feature-flags-in-gitlab-development).
 
 NOTE: **Note:**

doc/development/import_export.md

@@ -413,5 +413,5 @@ tree
     └── 4352.json
 ```
 
-CAUTION: **Caution:**
+WARNING:
 When updating these fixtures, please ensure you update both `json` files and `tree` folder, as the tests apply to both.

doc/development/internal_api.md

@@ -385,7 +385,7 @@ These endpoints are all authenticated using JWT. The JWT secret is stored in a f
 specified in `config/gitlab.yml`. By default, the location is in the root of the
 GitLab Rails app in a file called `.gitlab_kas_secret`.
 
-CAUTION: **Caution:**
+WARNING:
 The Kubernetes agent is under development and is not recommended for production use.
 
 ### Kubernetes agent information

doc/development/permissions.md

@@ -26,7 +26,7 @@ The visibility level of a group can be changed only if all subgroups and
 sub-projects have the same or lower visibility level. For example, a group can be set
 to internal only if all subgroups and projects are internal or private.
 
-CAUTION: **Warning:**
+WARNING:
 If you migrate an existing group to a lower visibility level, that action does not migrate subgroups
 in the same way. This is a [known issue](https://gitlab.com/gitlab-org/gitlab/-/issues/22406).
 
@@ -70,7 +70,7 @@ can still view the groups and their entities (like epics).
 Project membership (where the group membership is already taken into account)
 is stored in the `project_authorizations` table.
 
-CAUTION: **Caution:**
+WARNING:
 Due to [an issue](https://gitlab.com/gitlab-org/gitlab/-/issues/219299),
 projects in personal namespace will not show owner (`50`) permission in
 `project_authorizations` table. Note however that [`user.owned_projects`](https://gitlab.com/gitlab-org/gitlab/blob/0d63823b122b11abd2492bca47cc26858eee713d/app/models/user.rb#L906-916)

doc/development/product_analytics/usage_ping.md

@@ -781,7 +781,7 @@ appear to be associated to any of the services running, since they all appear to
 > - It's [deployed behind a feature flag](../../user/feature_flags.md), disabled by default.
 > - It's enabled on GitLab.com.
 
-CAUTION: **Warning:**
+WARNING:
 This feature is intended solely for internal GitLab use.
 
 In order to add data for aggregated metrics into Usage Ping payload you should add corresponding definition into  [`aggregated_metrics.yml`](https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/gitlab/usage_data_counters/aggregated_metrics.yml) file. Each aggregate definition includes following parts:

doc/development/shell_scripting_guide/index.md

@@ -21,7 +21,7 @@ deviations from this guide, they should be described in the
 
 ## Avoid using shell scripts
 
-CAUTION: **Caution:**
+WARNING:
 This is a must-read section.
 
 Having said all of the above, we recommend staying away from shell scripts

doc/development/testing_guide/best_practices.md

@@ -720,7 +720,7 @@ at all possible.
 
 #### Test Snowplow events
 
-CAUTION: **Warning:**
+WARNING:
 Snowplow performs **runtime type checks** by using the [contracts gem](https://rubygems.org/gems/contracts).
 Since Snowplow is **by default disabled in tests and development**, it can be hard to
 **catch exceptions** when mocking `Gitlab::Tracking`.
@@ -792,7 +792,7 @@ describe "#==" do
 end
 ```
 
-CAUTION: **Caution:**
+WARNING:
 Only use simple values as input in the `where` block. Using procs, stateful
 objects, FactoryBot-created objects etc. can lead to
 [unexpected results](https://github.com/tomykaira/rspec-parameterized/issues/8).

doc/development/testing_guide/end_to_end/beginners_guide.md

@@ -52,7 +52,7 @@ For information about the distribution of tests per level in GitLab, see
 - Finally, discuss the proposed test with the developer(s) involved in implementing
   the feature and the lower-level tests.
 
-CAUTION: **Caution:**
+WARNING:
 Check both [GitLab Community Edition](https://gitlab-org.gitlab.io/gitlab-foss/coverage-ruby/#_AllFiles) and
 [GitLab Enterprise Edition](https://gitlab-org.gitlab.io/gitlab/coverage-ruby/#_AllFiles) coverage projects
 for previously-written tests for this feature. For analyzing the code coverage,
@@ -86,7 +86,7 @@ file `basic_login_spec.rb`.
 
 See the [`RSpec.describe` outer block](#the-outer-rspecdescribe-block)
 
-CAUTION: **Deprecation notice:**
+WARNING:
 The outer `context` [was deprecated](https://gitlab.com/gitlab-org/quality/team-tasks/-/issues/550) in `13.2`
 in adherence to RSpec 4.0 specifications. Use `RSpec.describe` instead.
 

doc/development/testing_guide/end_to_end/environment_selection.md

@@ -19,7 +19,7 @@ We can specify what environments or pipelines to run tests against using the `on
 | `production` | Match against production | `Static` |
 | `pipeline` | Match against a pipeline | `Array` or `Static`|
 
-CAUTION: **Caution:**
+WARNING:
 You cannot specify `:production` and `{ <switch>: 'value' }` simultaneously.
 These options are mutually exclusive. If you want to specify production, you
 can control the `tld` and `domain` independently.

doc/development/testing_guide/end_to_end/feature_flags.md

@@ -17,7 +17,7 @@ and `GITLAB_ADMIN_PASSWORD`.
 Please be sure to include the tag `:requires_admin` so that the test can be skipped in environments
 where admin access is not available.
 
-CAUTION: **Caution:**
+WARNING:
 You are strongly advised to [enable feature flags only for a group, project, user](../../feature_flags/development.md#feature-actors),
 or [feature group](../../feature_flags/development.md#feature-groups). This makes it possible to
 test a feature in a shared environment without affecting other users.

doc/development/uploads.md

@@ -280,7 +280,7 @@ Uploads routes belong to one of these categories:
 1. Grape API: uploads handled by a Grape API endpoint.
 1. GraphQL API: uploads handled by a GraphQL resolve function.
 
-CAUTION: **Warning:**
+WARNING:
 GraphQL uploads do not support [direct upload](#direct-upload) yet. Depending on the use case, the feature may not work on installations without NFS (like GitLab.com or Kubernetes installations). Uploading to object storage inside the GraphQL resolve function may result in timeout errors. For more details please follow [issue #280819](https://gitlab.com/gitlab-org/gitlab/-/issues/280819).
 
 ### Update Workhorse for the new route
@@ -310,7 +310,7 @@ few things to do:
 1. Generally speaking, it's a good idea to check if the instance is from the [`UploadedFile`](https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/uploaded_file.rb) class. For example, see how we checked
 [that the parameter is indeed an `UploadedFile`](https://gitlab.com/gitlab-org/gitlab/-/commit/ea30fe8a71bf16ba07f1050ab4820607b5658719#51c0cc7a17b7f12c32bc41cfab3649ff2739b0eb_79_77).
 
-CAUTION: **Caution:**
+WARNING:
 **Do not** call `UploadedFile#from_params` directly! Do not build an [`UploadedFile`](https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/uploaded_file.rb)
 instance using `UploadedFile#from_params`! This method can be unsafe to use depending on the `params`
 passed. Instead, use the [`UploadedFile`](https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/uploaded_file.rb)
@@ -339,7 +339,7 @@ use `requires :file, type: ::API::Validations::Types::WorkhorseFile`.
    - The remaining code of the processing. This is where the code must be reading the parameter (for
 our example, it would be `params[:file]`).
 
-CAUTION: **Caution:**
+WARNING:
 **Do not** call `UploadedFile#from_params` directly! Do not build an [`UploadedFile`](https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/uploaded_file.rb)
 object using `UploadedFile#from_params`! This method can be unsafe to use depending on the `params`
 passed. Instead, use the [`UploadedFile`](https://gitlab.com/gitlab-org/gitlab/-/blob/master/lib/uploaded_file.rb)

doc/gitlab-basics/command-line-commands.md

@@ -102,7 +102,7 @@ might be asked for an administrator password.
 sudo RESTRICTED-COMMAND
 ```
 
-CAUTION: **Caution:**
+WARNING:
 Be careful of the commands you run with `sudo`. Certain commands may cause
 damage to your data or system.
 

doc/gitlab-basics/start-using-git.md

@@ -453,7 +453,7 @@ git reset HEAD~1
 
 This leaves the changed files and folders unstaged in your local repository.
 
-CAUTION: **Warning:**
+WARNING:
 A Git commit should not usually be reversed, particularly if you already pushed it
 to the remote repository. Although you can undo a commit, the best option is to avoid
 the situation altogether by working carefully.

doc/install/aws/index.md

@@ -557,7 +557,7 @@ gitlab=# \q
 
 #### Set up Gitaly
 
-CAUTION: **Caution:**
+WARNING:
 In this architecture, having a single Gitaly server creates a single point of failure. Use
 [Gitaly Cluster](../../administration/gitaly/praefect.md) to remove this limitation.
 

doc/install/azure/index.md

@@ -8,7 +8,7 @@ type: howto
 
 # Install GitLab on Microsoft Azure
 
-CAUTION: **Deprecated:**
+WARNING:
 The GitLab image in the Azure Marketplace is deprecated. You can track GitLab's
 efforts to [post a new image](https://gitlab.com/gitlab-com/alliances/microsoft/gitlab-tracker/-/issues/2).
 

doc/install/installation.md

@@ -443,7 +443,7 @@ Make sure to replace `<X-Y-stable>` with the stable branch that matches the
 version you want to install. For example, if you want to install 11.8 you would
 use the branch name `11-8-stable`.
 
-CAUTION: **Caution:**
+WARNING:
 You can change `<X-Y-stable>` to `master` if you want the *bleeding edge* version, but never install `master` on a production server!
 
 ### Configure It