Merge branch 'selhorn-reflinks' into 'master'

Replaced ref links with inline ones

See merge request gitlab-org/gitlab!28389

doc/administration/job_artifacts.md

@@ -21,7 +21,7 @@ To disable artifacts site-wide, follow the steps below.
    gitlab_rails['artifacts_enabled'] = false
    ```
 
-1. Save the file and [reconfigure GitLab][] for the changes to take effect.
+1. Save the file and [reconfigure GitLab](restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
 
 **In installations from source:**
 
@@ -32,7 +32,7 @@ To disable artifacts site-wide, follow the steps below.
      enabled: false
    ```
 
-1. Save the file and [restart GitLab][] for the changes to take effect.
+1. Save the file and [restart GitLab](restart_gitlab.md#installations-from-source) for the changes to take effect.
 
 ## Storing job artifacts
 
@@ -57,7 +57,7 @@ _The artifacts are stored by default in
    gitlab_rails['artifacts_path'] = "/mnt/storage/artifacts"
    ```
 
-1. Save the file and [reconfigure GitLab][] for the changes to take effect.
+1. Save the file and [reconfigure GitLab](restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
 
 **In installations from source:**
 
@@ -73,7 +73,7 @@ _The artifacts are stored by default in
      path: /mnt/storage/artifacts
    ```
 
-1. Save the file and [restart GitLab][] for the changes to take effect.
+1. Save the file and [restart GitLab](restart_gitlab.md#installations-from-source) for the changes to take effect.
 
 ### Using object storage
 
@@ -153,7 +153,7 @@ _The artifacts are stored by default in
    }
    ```
 
-1. Save the file and [reconfigure GitLab][] for the changes to take effect.
+1. Save the file and [reconfigure GitLab](restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
 1. Migrate any existing local artifacts to the object storage:
 
    ```shell
@@ -186,7 +186,7 @@ _The artifacts are stored by default in
          region: eu-central-1
    ```
 
-1. Save the file and [restart GitLab][] for the changes to take effect.
+1. Save the file and [restart GitLab](restart_gitlab.md#installations-from-source) for the changes to take effect.
 1. Migrate any existing local artifacts to the object storage:
 
    ```shell
@@ -205,13 +205,13 @@ by the `gitlab:artifacts:migrate` script.
 In order to migrate back to local storage:
 
 1. Set both `direct_upload` and `background_upload` to false in `gitlab.rb`, under the artifacts object storage settings.
-1. [reconfigure GitLab][].
+1. [Reconfigure GitLab](restart_gitlab.md#omnibus-gitlab-reconfigure).
 1. Run `gitlab-rake gitlab:artifacts:migrate_to_local`.
 1. Disable object_storage for artifacts in `gitlab.rb`:
    - Set `gitlab_rails['artifacts_object_store_enabled'] = false`.
    - Comment out all other `artifacts_object_store` settings, including the entire
      `artifacts_object_store_connection` section, including the closing `}`.
-1. [reconfigure GitLab][].
+1. [Reconfigure GitLab](restart_gitlab.md#omnibus-gitlab-reconfigure).
 
 ## Expiring artifacts
 
@@ -231,7 +231,7 @@ steps below.
    gitlab_rails['expire_build_artifacts_worker_cron'] = "50 * * * *"
    ```
 
-1. Save the file and [reconfigure GitLab][] for the changes to take effect.
+1. Save the file and [reconfigure GitLab](restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
 
 **In installations from source:**
 
@@ -243,7 +243,7 @@ steps below.
      cron: "50 * * * *"
    ```
 
-1. Save the file and [restart GitLab][] for the changes to take effect.
+1. Save the file and [restart GitLab](restart_gitlab.md#installations-from-source) for the changes to take effect.
 
 ## Validation for dependencies
 
@@ -295,7 +295,7 @@ and [projects APIs](../api/projects.md).
 ## Implementation details
 
 When GitLab receives an artifacts archive, an archive metadata file is also
-generated by [GitLab Workhorse]. This metadata file describes all the entries
+generated by [GitLab Workhorse](https://gitlab.com/gitlab-org/gitlab-workhorse). This metadata file describes all the entries
 that are located in the artifacts archive itself.
 The metadata file is in a binary format, with additional GZIP compression.
 
@@ -304,14 +304,10 @@ and disk I/O. It instead inspects the metadata file which contains all the
 relevant information. This is especially important when there is a lot of
 artifacts, or an archive is a very large file.
 
-When clicking on a specific file, [GitLab Workhorse] extracts it
+When clicking on a specific file, [GitLab Workhorse](https://gitlab.com/gitlab-org/gitlab-workhorse) extracts it
 from the archive and the download begins. This implementation saves space,
 memory and disk I/O.
 
-[reconfigure gitlab]: restart_gitlab.md#omnibus-gitlab-reconfigure "How to reconfigure Omnibus GitLab"
-[restart gitlab]: restart_gitlab.md#installations-from-source "How to restart GitLab"
-[gitlab workhorse]: https://gitlab.com/gitlab-org/gitlab-workhorse "GitLab Workhorse repository"
-
 ## Troubleshooting
 
 ### Job artifacts using too much disk space

doc/administration/pages/index.md

@@ -4,14 +4,14 @@ description: 'Learn how to administer GitLab Pages.'
 
 # GitLab Pages administration
 
-> - [Introduced][ee-80] in GitLab EE 8.3.
-> - Custom CNAMEs with TLS support were [introduced][ee-173] in GitLab EE 8.5.
-> - GitLab Pages [was ported][ce-14605] to Community Edition in GitLab 8.17.
+> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/80) in GitLab EE 8.3.
+> - Custom CNAMEs with TLS support were [introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/173) in GitLab EE 8.5.
+> - GitLab Pages [was ported](https://gitlab.com/gitlab-org/gitlab-foss/issues/14605) to Community Edition in GitLab 8.17.
 > - Support for subgroup project's websites was
 >   [introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/30548) in GitLab 11.8.
 
 GitLab Pages allows for hosting of static sites. It must be configured by an
-administrator. Separate [user documentation][pages-userguide] is available.
+administrator. Separate [user documentation](../../user/project/pages/index.md) is available.
 
 NOTE: **Note:**
 This guide is for Omnibus GitLab installations. If you have installed
@@ -20,11 +20,11 @@ GitLab from source, see
 
 ## Overview
 
-GitLab Pages makes use of the [GitLab Pages daemon], a simple HTTP server
+GitLab Pages makes use of the [GitLab Pages daemon](https://gitlab.com/gitlab-org/gitlab-pages), a simple HTTP server
 written in Go that can listen on an external IP address and provide support for
 custom domains and custom certificates. It supports dynamic certificates through
 SNI and exposes pages using HTTP2 by default.
-You are encouraged to read its [README][pages-readme] to fully understand how
+You are encouraged to read its [README](https://gitlab.com/gitlab-org/gitlab-pages/blob/master/README.md) to fully understand how
 it works.
 
 In the case of [custom domains](#custom-domains) (but not
@@ -124,9 +124,9 @@ The Pages daemon doesn't listen to the outside world.
    pages_external_url 'http://example.io'
    ```
 
-1. [Reconfigure GitLab][reconfigure].
+1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
 
-Watch the [video tutorial][video-admin] for this configuration.
+Watch the [video tutorial](https://youtu.be/dD8c7WNcc6s) for this configuration.
 
 ### Wildcard domains with TLS support
 
@@ -156,7 +156,7 @@ outside world.
    where `pages-nginx.crt` and `pages-nginx.key` are the SSL cert and key,
    respectively.
 
-1. [Reconfigure GitLab][reconfigure].
+1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
 
 ### Additional configuration for Docker container
 
@@ -171,7 +171,7 @@ behavior:
    gitlab_pages['inplace_chroot'] = true
    ```
 
-1. [Reconfigure GitLab][reconfigure].
+1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
 
 NOTE: **Note:**
 `inplace_chroot` option might not work with the other features, such as [Pages Access Control](#access-control).
@@ -213,7 +213,7 @@ world. Custom domains are supported, but no TLS.
    `192.0.2.2` and `2001::2` are the secondary IPs the GitLab Pages daemon
    listens on. If you don't have IPv6, you can omit the IPv6 address.
 
-1. [Reconfigure GitLab][reconfigure].
+1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
 
 ### Custom domains with TLS support
 
@@ -247,7 +247,7 @@ world. Custom domains and TLS are supported.
    `192.0.2.2` and `2001::2` are the secondary IPs where the GitLab Pages daemon
    listens on. If you don't have IPv6, you can omit the IPv6 address.
 
-1. [Reconfigure GitLab][reconfigure].
+1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
 
 ### Custom domain verification
 
@@ -304,7 +304,7 @@ Pages access control is disabled by default. To enable it:
    gitlab_pages['access_control'] = true
    ```
 
-1. [Reconfigure GitLab][reconfigure].
+1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
 1. Users can now configure it in their [projects' settings](../../user/project/pages/pages_access_control.md).
 
 #### Disabling public access to all Pages websites
@@ -340,7 +340,7 @@ pages:
    gitlab_pages['http_proxy'] = 'http://example:8080'
    ```
 
-1. [Reconfigure GitLab][reconfigure] for the changes to take effect.
+1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure) for the changes to take effect.
 
 ### Using a custom Certificate Authority (CA)
 
@@ -389,7 +389,7 @@ Follow the steps below to configure verbose logging of GitLab Pages daemon.
    gitlab_pages['log_verbose'] = true
    ```
 
-1. [Reconfigure GitLab][reconfigure].
+1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
 
 ## Change storage path
 
@@ -404,7 +404,7 @@ are stored.
    gitlab_rails['pages_path'] = "/mnt/storage/pages"
    ```
 
-1. [Reconfigure GitLab][reconfigure].
+1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
 
 ## Configure listener for reverse proxy requests
 
@@ -427,7 +427,7 @@ Omnibus GitLab 11.1.
    gitlab_pages['listen_proxy'] = "localhost:10080"
    ```
 
-1. [Reconfigure GitLab][reconfigure].
+1. [Reconfigure GitLab](../restart_gitlab.md#omnibus-gitlab-reconfigure).
 
 ## Set maximum pages size
 
@@ -559,7 +559,7 @@ then you must use the following procedure to configure [access control](#access-
 
 ## Backup
 
-GitLab Pages are part of the [regular backup][backup], so there is no separate backup to configure.
+GitLab Pages are part of the [regular backup](../../raketasks/backup_restore.md), so there is no separate backup to configure.
 
 ## Security
 
@@ -610,16 +610,3 @@ The fix is to correct the source file permissions and restart Pages:
 sudo chmod 644 /opt/gitlab/embedded/ssl/certs/cacert.pem
 sudo gitlab-ctl restart gitlab-pages
 ```
-
-[backup]: ../../raketasks/backup_restore.md
-[ce-14605]: https://gitlab.com/gitlab-org/gitlab-foss/issues/14605
-[ee-80]: https://gitlab.com/gitlab-org/gitlab/-/merge_requests/80
-[ee-173]: https://gitlab.com/gitlab-org/gitlab/-/merge_requests/173
-[gitlab pages daemon]: https://gitlab.com/gitlab-org/gitlab-pages
-[NGINX configs]: https://gitlab.com/gitlab-org/gitlab/tree/8-5-stable-ee/lib/support/nginx
-[pages-readme]: https://gitlab.com/gitlab-org/gitlab-pages/blob/master/README.md
-[pages-userguide]: ../../user/project/pages/index.md
-[reconfigure]: ../restart_gitlab.md#omnibus-gitlab-reconfigure
-[restart]: ../restart_gitlab.md#installations-from-source
-[gitlab-pages]: https://gitlab.com/gitlab-org/gitlab-pages/tree/v0.2.4
-[video-admin]: https://youtu.be/dD8c7WNcc6s

doc/administration/pages/source.md

@@ -17,12 +17,12 @@ Pages to the latest supported version.
 
 ## Overview
 
-GitLab Pages makes use of the [GitLab Pages daemon], a simple HTTP server
+GitLab Pages makes use of the [GitLab Pages daemon](https://gitlab.com/gitlab-org/gitlab-pages), a simple HTTP server
 written in Go that can listen on an external IP address and provide support for
 custom domains and custom certificates. It supports dynamic certificates through
 SNI and exposes pages using HTTP2 by default.
-You are encouraged to read its [README][pages-readme] to fully understand how
-it works.
+You are encouraged to read its [README](https://gitlab.com/gitlab-org/gitlab-pages/blob/master/README.md)
+to fully understand how it works.
 
 In the case of [custom domains](#custom-domains) (but not
 [wildcard domains](#wildcard-domains)), the Pages daemon needs to listen on
@@ -55,7 +55,7 @@ Before proceeding with the Pages configuration, make sure that:
    Pages artifacts.
 1. (Optional) You have a **wildcard certificate** for the Pages domain if you
    decide to serve Pages (`*.example.io`) under HTTPS.
-1. (Optional but recommended) You have configured and enabled the [Shared Runners][]
+1. (Optional but recommended) You have configured and enabled the [Shared Runners](../../ci/runners/README.md)
    so that your users don't have to bring their own.
 
 ### DNS configuration
@@ -144,7 +144,7 @@ The Pages daemon doesn't listen to the outside world.
    ```
 
 1. Restart NGINX
-1. [Restart GitLab][restart]
+1. [Restart GitLab](../restart_gitlab.md#installations-from-source)
 
 ### Wildcard domains with TLS support
 
@@ -201,7 +201,7 @@ outside world.
    ```
 
 1. Restart NGINX
-1. [Restart GitLab][restart]
+1. [Restart GitLab](../restart_gitlab.md#installations-from-source)
 
 ## Advanced configuration
 
@@ -272,7 +272,7 @@ world. Custom domains are supported, but no TLS.
    `0.0.0.0` with `192.0.2.1`, where `192.0.2.1` the primary IP where GitLab
    listens to.
 1. Restart NGINX
-1. [Restart GitLab][restart]
+1. [Restart GitLab](../restart_gitlab.md#installations-from-source)
 
 ### Custom domains with TLS support
 
@@ -341,7 +341,7 @@ world. Custom domains and TLS are supported.
    `0.0.0.0` with `192.0.2.1`, where `192.0.2.1` the primary IP where GitLab
    listens to.
 1. Restart NGINX
-1. [Restart GitLab][restart]
+1. [Restart GitLab](../restart_gitlab.md#installations-from-source)
 
 ## NGINX caveats
 
@@ -402,7 +402,7 @@ Pages access control is disabled by default. To enable it:
      access_control: true
    ```
 
-1. [Restart GitLab][restart].
+1. [Restart GitLab](../restart_gitlab.md#installations-from-source).
 1. Create a new [system OAuth application](../../integration/oauth_provider.md#adding-an-application-through-the-profile).
    This should be called `GitLab Pages` and have a `Redirect URL` of
    `https://projects.example.io/auth`. It does not need to be a "trusted"
@@ -435,7 +435,7 @@ are stored.
      path: /mnt/storage/pages
    ```
 
-1. [Restart GitLab][restart]
+1. [Restart GitLab](../restart_gitlab.md#installations-from-source)
 
 ## Set maximum Pages size
 
@@ -445,21 +445,9 @@ The default is 100MB.
 
 ## Backup
 
-Pages are part of the [regular backup][backup] so there is nothing to configure.
+Pages are part of the [regular backup](../../raketasks/backup_restore.md) so there is nothing to configure.
 
 ## Security
 
 You should strongly consider running GitLab Pages under a different hostname
 than GitLab to prevent XSS attacks.
-
-[backup]: ../../raketasks/backup_restore.md
-[ee-80]: https://gitlab.com/gitlab-org/gitlab/-/merge_requests/80
-[ee-173]: https://gitlab.com/gitlab-org/gitlab/-/merge_requests/173
-[gitlab pages daemon]: https://gitlab.com/gitlab-org/gitlab-pages
-[NGINX configs]: https://gitlab.com/gitlab-org/gitlab/tree/8-5-stable-ee/lib/support/nginx
-[pages-readme]: https://gitlab.com/gitlab-org/gitlab-pages/blob/master/README.md
-[pages-userguide]: ../../user/project/pages/index.md
-[restart]: ../restart_gitlab.md#installations-from-source
-[gitlab-pages]: https://gitlab.com/gitlab-org/gitlab-pages/tree/v0.4.0
-[gl-example]: https://gitlab.com/gitlab-org/gitlab/blob/master/lib/support/init.d/gitlab.default.example
-[shared runners]: ../../ci/runners/README.md

doc/topics/autodevops/index.md

 # Auto DevOps
 
-> - [Introduced][ce-37115] in GitLab 10.0.
+> - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/37115) in GitLab 10.0.
 > - Generally available on GitLab 11.0.
 
 Auto DevOps provides pre-defined CI/CD configuration which allows you to automatically detect, build, test,
@@ -317,7 +317,7 @@ When using Auto DevOps, you may want to deploy different environments to
 different Kubernetes clusters. This is possible due to the 1:1 connection that
 [exists between them](../../user/project/clusters/index.md#multiple-kubernetes-clusters-premium).
 
-In the [Auto DevOps template] (used behind the scenes by Auto DevOps), there
+In the [Auto DevOps template](https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/ci/templates/Auto-DevOps.gitlab-ci.yml) (used behind the scenes by Auto DevOps), there
 are currently 3 defined environment names that you need to know:
 
 - `review/` (every environment starting with `review/`)
@@ -369,7 +369,7 @@ Auto Build creates a build of the application using an existing `Dockerfile` or
 Heroku buildpacks.
 
 Either way, the resulting Docker image is automatically pushed to the
-[Container Registry][container-registry] and tagged with the commit SHA or tag.
+[Container Registry](../../user/packages/container_registry/index.md) and tagged with the commit SHA or tag.
 
 #### Auto Build using a Dockerfile
 
@@ -430,7 +430,7 @@ Any differences between the source and target branches are also
 
 ### Auto SAST **(ULTIMATE)**
 
-> Introduced in [GitLab Ultimate][ee] 10.3.
+> Introduced in [GitLab Ultimate](https://about.gitlab.com/pricing/) 10.3.
 
 Static Application Security Testing (SAST) uses the
 [SAST Docker image](https://gitlab.com/gitlab-org/security-products/sast) to run static
@@ -445,7 +445,7 @@ Any security warnings are also shown in the merge request widget. Read more how
 
 ### Auto Dependency Scanning **(ULTIMATE)**
 
-> Introduced in [GitLab Ultimate][ee] 10.7.
+> Introduced in [GitLab Ultimate](https://about.gitlab.com/pricing/) 10.7.
 
 Dependency Scanning uses the
 [Dependency Scanning Docker image](https://gitlab.com/gitlab-org/security-products/dependency-scanning)
@@ -462,7 +462,7 @@ Any security warnings are also shown in the merge request widget. Read more abou
 
 ### Auto License Compliance **(ULTIMATE)**
 
-> Introduced in [GitLab Ultimate][ee] 11.0.
+> Introduced in [GitLab Ultimate](https://about.gitlab.com/pricing/) 11.0.
 
 License Compliance uses the
 [License Compliance Docker image](https://gitlab.com/gitlab-org/security-products/license-management)
@@ -498,7 +498,7 @@ This is an optional step, since many projects do not have a Kubernetes cluster
 available. If the [requirements](#requirements) are not met, the job will
 silently be skipped.
 
-[Review Apps][review-app] are temporary application environments based on the
+[Review Apps](../../ci/review_apps/index.md) are temporary application environments based on the
 branch's code so developers, designers, QA, product managers, and other
 reviewers can actually see and interact with code changes as part of the review
 process. Auto Review Apps create a Review App for each branch.
@@ -533,7 +533,7 @@ in the first place, and thus not realize that it needs to re-apply the old confi
 
 ### Auto DAST **(ULTIMATE)**
 
-> Introduced in [GitLab Ultimate][ee] 10.4.
+> Introduced in [GitLab Ultimate](https://about.gitlab.com/pricing/) 10.4.
 
 Dynamic Application Security Testing (DAST) uses the
 popular open source tool [OWASP ZAProxy](https://github.com/zaproxy/zaproxy)
@@ -570,7 +570,7 @@ DAST can be disabled:
 
 ### Auto Browser Performance Testing **(PREMIUM)**
 
-> Introduced in [GitLab Premium][ee] 10.4.
+> Introduced in [GitLab Premium](https://about.gitlab.com/pricing/) 10.4.
 
 Auto Browser Performance Testing utilizes the [Sitespeed.io container](https://hub.docker.com/r/sitespeedio/sitespeed.io/) to measure the performance of a web page. A JSON report is created and uploaded as an artifact, which includes the overall performance score for each page. By default, the root page of Review and Production environments will be tested. If you would like to add additional URL's to test, simply add the paths to a file named `.gitlab-urls.txt` in the root directory, one per line. For example:
 
@@ -595,7 +595,7 @@ the Kubernetes cluster, with a namespace based on the project name and unique
 project ID, for example `project-4321`.
 
 Auto Deploy doesn't include deployments to staging or canary by default, but the
-[Auto DevOps template] contains job definitions for these tasks if you want to
+[Auto DevOps template](https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/ci/templates/Auto-DevOps.gitlab-ci.yml) contains job definitions for these tasks if you want to
 enable them.
 
 You can make use of [environment variables](#environment-variables) to automatically
@@ -619,7 +619,7 @@ deploys with Auto DevOps can undo your changes. Also, if you change something
 and want to undo it by deploying again, Helm may not detect that anything changed
 in the first place, and thus not realize that it needs to re-apply the old config.
 
-> [Introduced][ce-19507] in GitLab 11.0.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/19507) in GitLab 11.0.
 
 For internal and private projects a [GitLab Deploy Token](../../user/project/deploy_tokens/index.md#gitlab-deploy-token)
 will be automatically created, when Auto DevOps is enabled and the Auto DevOps settings are saved. This Deploy Token
@@ -669,7 +669,7 @@ restore your database before opting into version `2`.
 
 #### Migrations
 
-> [Introduced][ce-21955] in GitLab 11.4
+> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/21955) in GitLab 11.4
 
 Database initialization and migrations for PostgreSQL can be configured to run
 within the application pod by setting the project variables `DB_INITIALIZE` and
@@ -1017,7 +1017,7 @@ to the desired environment. See [Limiting environment scopes of variables](../..
 
 ### Customizing `.gitlab-ci.yml`
 
-Auto DevOps is completely customizable because the [Auto DevOps template]:
+Auto DevOps is completely customizable because the [Auto DevOps template](https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/ci/templates/Auto-DevOps.gitlab-ci.yml):
 
 - Is just an implementation of a [`.gitlab-ci.yml`](../../ci/yaml/README.md) file.
 - Uses only features available to any implementation of `.gitlab-ci.yml`.
@@ -1033,7 +1033,7 @@ include:
 ```
 
 Then add any extra changes you want. Your additions will be merged with the
-[Auto DevOps template] using the behaviour described for
+[Auto DevOps template](https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/ci/templates/Auto-DevOps.gitlab-ci.yml) using the behaviour described for
 [`include`](../../ci/yaml/README.md#include).
 
 It is also possible to copy and paste the contents of the [Auto DevOps
@@ -1083,12 +1083,12 @@ include:
   - template: Jobs/Build.gitlab-ci.yml
 ```
 
-Consult the [Auto DevOps template] for information on available jobs.
+Consult the [Auto DevOps template](https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/ci/templates/Auto-DevOps.gitlab-ci.yml) for information on available jobs.
 
 ### PostgreSQL database support
 
 In order to support applications that require a database,
-[PostgreSQL][postgresql] is provisioned by default. The credentials to access
+[PostgreSQL](https://www.postgresql.org/) is provisioned by default. The credentials to access
 the database are preconfigured, but can be customized by setting the associated
 [variables](#environment-variables). These credentials can be used for defining a
 `DATABASE_URL` of the format:
@@ -1550,16 +1550,6 @@ spec:
   service account for your project. For help debugging this issue, see
   [Troubleshooting failed deployment jobs](../../user/project/clusters/index.md#troubleshooting).
 
-[ce-37115]: https://gitlab.com/gitlab-org/gitlab-foss/issues/37115
-[docker-in-docker]: ../../docker/using_docker_build.md#use-docker-in-docker-executor
-[review-app]: ../../ci/review_apps/index.md
-[container-registry]: ../../user/packages/container_registry/index.md
-[postgresql]: https://www.postgresql.org/
-[Auto DevOps template]: https://gitlab.com/gitlab-org/gitlab/blob/master/lib/gitlab/ci/templates/Auto-DevOps.gitlab-ci.yml
-[ee]: https://about.gitlab.com/pricing/
-[ce-21955]: https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/21955
-[ce-19507]: https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/19507
-
 ## Development guides
 
 [Development guide for Auto DevOps](../../development/auto_devops.md)