Merge branch 'docs/https-many-docs-links' into 'master'

Https many links in docs

See merge request gitlab-org/gitlab-ce!29776

doc/administration/environment_variables.md

@@ -64,4 +64,4 @@ instructions](https://docs.gitlab.com/omnibus/settings/environment-variables.htm
 
 It's possible to preconfigure the GitLab docker image by adding the environment
 variable `GITLAB_OMNIBUS_CONFIG` to the `docker run` command.
-For more information see the ['preconfigure-docker-container' section in the Omnibus documentation](http://docs.gitlab.com/omnibus/docker/#preconfigure-docker-container).
+For more information see the ['preconfigure-docker-container' section in the Omnibus documentation](https://docs.gitlab.com/omnibus/docker/#preconfigure-docker-container).

doc/administration/high_availability/database.md

@@ -111,7 +111,7 @@ deploy the bundled PostgreSQL.
 > - If you are a Community Edition or Starter user, consider using a cloud hosted solution.
 > - This document will not cover installations from source.
 >
-> - If HA setup is not what you were looking for, see the [database configuration document](http://docs.gitlab.com/omnibus/settings/database.html)
+> - If HA setup is not what you were looking for, see the [database configuration document](https://docs.gitlab.com/omnibus/settings/database.html)
 >   for the Omnibus GitLab packages.
 >
 > Please read this document fully before attempting to configure PostgreSQL HA
@@ -1146,7 +1146,7 @@ postgresql['trust_auth_cidr_addresses'] = %w(123.123.123.123/32 <other_cidrs>)
 If you're running into an issue with a component not outlined here, be sure to check the troubleshooting section of their specific documentation page.
 
 - [Consul](consul.md#troubleshooting)
-- [PostgreSQL](http://docs.gitlab.com/omnibus/settings/database.html#troubleshooting)
+- [PostgreSQL](https://docs.gitlab.com/omnibus/settings/database.html#troubleshooting)
 - [GitLab application](gitlab.md#troubleshooting)
 
 ## Configure using Omnibus

doc/administration/high_availability/gitlab.md

@@ -66,7 +66,7 @@
     gitlab_rails['redis_port'] = '6379'
     gitlab_rails['redis_host'] = '10.1.0.6' # IP/hostname of Redis server
     gitlab_rails['redis_password'] = 'Redis Password'
-    
+
     # Ensure UIDs and GIDs match between servers for permissions via NFS
     user['uid'] = 9000
     user['gid'] = 9000
@@ -81,11 +81,11 @@
     servers should point to the external url that users will use to access GitLab.
     In a typical HA setup, this will be the url of the load balancer which will
     route traffic to all GitLab application servers in the HA cluster.
-    > 
+    >
     > **Note:** When you specify `https` in the `external_url`, as in the example
     above, GitLab assumes you have SSL certificates in `/etc/gitlab/ssl/`. If
     certificates are not present, Nginx will fail to start. See
-    [Nginx documentation](http://docs.gitlab.com/omnibus/settings/nginx.html#enable-https)
+    [Nginx documentation](https://docs.gitlab.com/omnibus/settings/nginx.html#enable-https)
     for more information.
     >
     > **Note:** It is best to set the `uid` and `gid`s prior to the initial reconfigure of GitLab. Omnibus will not recursively `chown` directories if set after the initial reconfigure.

doc/administration/high_availability/nfs.md

@@ -235,4 +235,4 @@ Read more on high-availability configuration:
 1. [Configure the GitLab application servers](gitlab.md)
 1. [Configure the load balancers](load_balancer.md)
 
-[udp-log-shipping]: http://docs.gitlab.com/omnibus/settings/logs.html#udp-log-shipping-gitlab-enterprise-edition-only "UDP log shipping"
+[udp-log-shipping]: https://docs.gitlab.com/omnibus/settings/logs.html#udp-log-shipping-gitlab-enterprise-edition-only "UDP log shipping"

doc/administration/logs.md

@@ -4,7 +4,7 @@ GitLab has an advanced log system where everything is logged so that you
 can analyze your instance using various system log files. In addition to
 system log files, GitLab Enterprise Edition comes with Audit Events.
 Find more about them [in Audit Events
-documentation](http://docs.gitlab.com/ee/administration/audit_events.html)
+documentation](https://docs.gitlab.com/ee/administration/audit_events.html)
 
 System log files are typically plain text in a standard log file format.
 This guide talks about how to read and use these system log files.

doc/administration/raketasks/maintenance.md

@@ -62,7 +62,7 @@ It will check that each component was set up according to the installation guide
 You may also have a look at our Troubleshooting Guides:
 
 - [Troubleshooting Guide (GitLab)](http://docs.gitlab.com/ee/README.html#troubleshooting)
-- [Troubleshooting Guide (Omnibus Gitlab)](http://docs.gitlab.com/omnibus/README.html#troubleshooting)
+- [Troubleshooting Guide (Omnibus Gitlab)](https://docs.gitlab.com/omnibus/README.html#troubleshooting)
 
 **Omnibus Installation**
 

doc/ci/docker/using_docker_images.md

@@ -482,8 +482,8 @@ To define which should be used, the GitLab Runner process reads the configuratio
   If the `--user` flag is provided to run the GitLab Runner child processes as unprivileged user,
   the home directory of the main GitLab Runner process user will be used.
 
-NOTE: **Note:** 
-GitLab Runner reads this configuration **only** from `config.toml` and ignores it if 
+NOTE: **Note:**
+GitLab Runner reads this configuration **only** from `config.toml` and ignores it if
 it's provided as an environment variable. This is because GitLab Runnner uses **only**
 `config.toml` configuration and doesn't interpolate **ANY** environment variables at
 runtime.
@@ -577,7 +577,7 @@ To configure credentials store, follow these steps:
 Make sure helper program is available in GitLab Runner `$PATH`.
 
 1. Make GitLab Runner use it. There are two ways to accomplish this. Either:
-   - Create a 
+   - Create a
      [variable](../variables/README.md#gitlab-cicd-environment-variables)
      `DOCKER_AUTH_CONFIG` with the content of the
    Docker configuration file as the value:
@@ -741,7 +741,7 @@ creation.
 [tutum/wordpress]: https://hub.docker.com/r/tutum/wordpress/
 [postgres-hub]: https://hub.docker.com/r/_/postgres/
 [mysql-hub]: https://hub.docker.com/r/_/mysql/
-[runner-priv-reg]: http://docs.gitlab.com/runner/configuration/advanced-configuration.html#using-a-private-container-registry
+[runner-priv-reg]: https://docs.gitlab.com/runner/configuration/advanced-configuration.html#using-a-private-container-registry
 [entrypoint]: https://docs.docker.com/engine/reference/builder/#entrypoint
 [cmd]: https://docs.docker.com/engine/reference/builder/#cmd
 [register]: https://docs.gitlab.com/runner/register/

doc/ci/runners/README.md

@@ -418,9 +418,9 @@ You can find the IP address of a Runner for a specific project by:
 
 ![specific Runner IP address](img/specific_runner_ip_address.png)
 
-[install]: http://docs.gitlab.com/runner/install/
+[install]: https://docs.gitlab.com/runner/install/
 [fifo]: https://en.wikipedia.org/wiki/FIFO_(computing_and_electronics)
-[register]: http://docs.gitlab.com/runner/register/
+[register]: https://docs.gitlab.com/runner/register/
 [protected branches]: ../../user/project/protected_branches.md
 [protected tags]: ../../user/project/protected_tags.md
 [project defined timeout]: ../../user/project/pipelines/settings.html#timeout

doc/development/documentation/site_architecture/global_nav.md

@@ -283,7 +283,7 @@ For instance, for `https://docs.gitlab.com/ce/user/index.html`,
 #### Default URL
 
 The default and canonical URL for GitLab documentation is
-`http://docs.gitlab.com/ee/`, thus, all links
+`https://docs.gitlab.com/ee/`, thus, all links
 in the docs site should link to `/ee/` except when linking
 among `/ce/` docs themselves.
 

doc/development/documentation/styleguide.md

@@ -710,7 +710,7 @@ for the changes to take effect.
 
 If the document you are editing resides in a place other than the GitLab CE/EE
 `doc/` directory, instead of the relative link, use the full path:
-`http://docs.gitlab.com/ce/administration/restart_gitlab.html`.
+`https://docs.gitlab.com/ce/administration/restart_gitlab.html`.
 Replace `reconfigure` with `restart` where appropriate.
 
 ### Installation guide
@@ -962,6 +962,6 @@ curl --request PUT --header "PRIVATE-TOKEN: <your_access_token>" --data "domain_
 
 [cURL]: http://curl.haxx.se/ "cURL website"
 [single spaces]: http://www.slate.com/articles/technology/technology/2011/01/space_invaders.html
-[gfm]: http://docs.gitlab.com/ce/user/markdown.html#newlines "GitLab flavored markdown documentation"
+[gfm]: https://docs.gitlab.com/ce/user/markdown.html#newlines "GitLab flavored markdown documentation"
 [ce-1242]: https://gitlab.com/gitlab-org/gitlab-ce/issues/1242
 [doc-restart]: ../../administration/restart_gitlab.md "GitLab restart documentation"

doc/install/relative_url.md

@@ -123,7 +123,7 @@ To disable the relative URL:
 1.  Follow the same as above starting from 2. and set up the
     GitLab URL to one that doesn't contain a relative path.
 
-[omnibus-rel]: http://docs.gitlab.com/omnibus/settings/configuration.html#configuring-a-relative-url-for-gitlab "How to set up relative URL in Omnibus GitLab"
+[omnibus-rel]: https://docs.gitlab.com/omnibus/settings/configuration.html#configuring-a-relative-url-for-gitlab "How to set up relative URL in Omnibus GitLab"
 [restart gitlab]: ../administration/restart_gitlab.md#installations-from-source "How to restart GitLab"
 
 <!-- ## Troubleshooting

doc/integration/README.md

@@ -55,7 +55,7 @@ at Super User also has relevant information.
 
 **Omnibus Trusted Chain**
 
-[Install the self signed certificate or custom certificate authorities](http://docs.gitlab.com/omnibus/common_installation_problems/README.html#using-self-signed-certificate-or-custom-certificate-authorities)
+[Install the self signed certificate or custom certificate authorities](https://docs.gitlab.com/omnibus/common_installation_problems/README.html#using-self-signed-certificate-or-custom-certificate-authorities)
 in to GitLab Omnibus.
 
 It is enough to concatenate the certificate to the main trusted certificate
@@ -71,4 +71,4 @@ After that restart GitLab with:
 sudo gitlab-ctl restart
 ```
 
-[jenkins]: http://docs.gitlab.com/ee/integration/jenkins.html
+[jenkins]: https://docs.gitlab.com/ee/integration/jenkins.html

doc/intro/README.md

@@ -43,4 +43,4 @@ Install and update your GitLab installation.
 
 - [Install GitLab](https://about.gitlab.com/installation/)
 - [Update GitLab](https://about.gitlab.com/update/)
-- [Explore Omnibus GitLab configuration options](http://docs.gitlab.com/omnibus/settings/configuration.html)
+- [Explore Omnibus GitLab configuration options](https://docs.gitlab.com/omnibus/settings/configuration.html)

doc/university/training/index.md

@@ -34,7 +34,7 @@ This section contains the following topics:
 
 ## Additional Resources
 
-1. [GitLab Documentation](http://docs.gitlab.com)
+1. [GitLab Documentation](https://docs.gitlab.com)
 1. [GUI Clients](http://git-scm.com/downloads/guis)
 1. [Pro Git book](http://git-scm.com/book)
 1. [Platzi Course](https://courses.platzi.com/courses/git-gitlab/)

doc/update/README.md

@@ -146,7 +146,7 @@ possible.
 - [Upgrading PostgreSQL Using Slony](upgrading_postgresql_using_slony.md), for
   upgrading a PostgreSQL database with minimal downtime.
 
-[omnidocker]: http://docs.gitlab.com/omnibus/docker/README.html
+[omnidocker]: https://docs.gitlab.com/omnibus/docker/README.html
 [old-ee-upgrade-docs]: https://gitlab.com/gitlab-org/gitlab-ee/tree/11-8-stable-ee/doc/update
 [old-ce-upgrade-docs]: https://gitlab.com/gitlab-org/gitlab-ce/tree/11-8-stable/doc/update
 [source-ce-to-ee]: upgrading_from_ce_to_ee.md

doc/user/project/integrations/webhooks.md

@@ -24,7 +24,7 @@ to the webhook URL.
 
 In most cases, you'll need to set up your own [webhook receiver](#example-webhook-receiver)
 to receive information from GitLab, and send it to another app, according to your needs.
-We already have a [built-in receiver](http://docs.gitlab.com/ce/project_services/slack.html)
+We already have a [built-in receiver](https://docs.gitlab.com/ce/project_services/slack.html)
 for sending [Slack](https://api.slack.com/incoming-webhooks) notifications _per project_.
 
 ## Overview
@@ -326,7 +326,7 @@ X-Gitlab-Event: Issue Hook
       "current": 1
     },
     "updated_at": {
-      "previous": "2017-09-15 16:50:55 UTC", 
+      "previous": "2017-09-15 16:50:55 UTC",
       "current": "2017-09-15 16:52:00 UTC"
     },
     "labels": {
@@ -888,7 +888,7 @@ X-Gitlab-Event: Merge Request Hook
       "current": 1
     },
     "updated_at": {
-      "previous": "2017-09-15 16:50:55 UTC", 
+      "previous": "2017-09-15 16:50:55 UTC",
       "current":"2017-09-15 16:52:00 UTC"
     },
     "labels": {

doc/user/project/protected_branches.md

@@ -180,6 +180,6 @@ for details about the pipelines security model.
 [ce-4892]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/4892 "Allow developers to merge into a protected branch without having push access"
 [ce-5081]: https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/5081 "Allow creating protected branches that can't be pushed to"
 [ce-21393]: https://gitlab.com/gitlab-org/gitlab-ce/issues/21393
-[ee-restrict]: http://docs.gitlab.com/ee/user/project/protected_branches.html#restricting-push-and-merge-access-to-certain-users
+[ee-restrict]: https://docs.gitlab.com/ee/user/project/protected_branches.html#restricting-push-and-merge-access-to-certain-users
 [perm]: ../permissions.md
 [ee]: https://about.gitlab.com/pricing/