Change codeblock fence langues to full name

Make sure change codeblock fence languages from js
to javascript, sh to shell, md to markdown

doc/administration/geo/replication/troubleshooting.md

@@ -499,7 +499,7 @@ to start again from scratch, there are a few steps that can help you:
 
 1. Refresh Foreign Data Wrapper tables
 
-   ```sh
+   ```shell
    gitlab-rake geo:db:refresh_foreign_tables
    ```
 

doc/administration/packages/container_registry.md

@@ -716,7 +716,7 @@ built-in command:
 
 If you did not change the default location of the configuration file, run:
 
-```sh
+```shell
 sudo gitlab-ctl registry-garbage-collect
 ```
 
@@ -725,7 +725,7 @@ layers you have stored.
 
 If you changed the location of the Container Registry `config.yml`:
 
-```sh
+```shell
 sudo gitlab-ctl registry-garbage-collect /path/to/config.yml
 ```
 
@@ -749,7 +749,7 @@ referenced by the registry tag. The `registry-garbage-collect` command supports
 `-m` switch to allow you to remove all unreferenced manifests and layers that are
 not directly accessible via `tag`:
 
-```sh
+```shell
 sudo gitlab-ctl registry-garbage-collect -m
 ```
 
@@ -787,7 +787,7 @@ To enable the read-only mode:
 
 1. Save and reconfigure GitLab:
 
-   ```sh
+   ```shell
    sudo gitlab-ctl reconfigure
    ```
 
@@ -795,7 +795,7 @@ To enable the read-only mode:
 
 1. Next, trigger one of the garbage collect commands:
 
-   ```sh
+   ```shell
    # Recycling unused tags
    sudo /opt/gitlab/embedded/bin/registry garbage-collect /var/opt/gitlab/registry/config.yml
 
@@ -822,7 +822,7 @@ To enable the read-only mode:
 
 1. Save and reconfigure GitLab:
 
-   ```sh
+   ```shell
    sudo gitlab-ctl reconfigure
    ```
 

doc/administration/static_objects_external_storage.md

@@ -63,7 +63,7 @@ other CDNs or Function as a Service (FaaS) systems should work using the same pr
      `pwgen -cn1 64` on a UNIX machine). Save this token for the admin panel, as
      described in the [configuring](#configuring) section.
 
-     ```js
+     ```javascript
      const ORIGIN_HOSTNAME = 'gitlab.installation.com' // FIXME: SET CORRECT VALUE
      const STORAGE_TOKEN = 'very-secure-token' // FIXME: SET CORRECT VALUE
      const CACHE_PRIVATE_OBJECTS = false

doc/administration/troubleshooting/log_parsing.md

@@ -16,19 +16,19 @@ include use cases targeted for parsing GitLab log files.
 
 #### Pipe colorized `jq` output into `less`
 
-```sh
+```shell
 jq . <FILE> -C | less -R
 ```
 
 #### Search for a term and pretty-print all matching lines
 
-```sh
+```shell
 grep <TERM> <FILE> | jq .
 ```
 
 #### Skip invalid lines of JSON
 
-```sh
+```shell
 jq -cR 'fromjson?' file.json | jq <COMMAND>
 ```
 
@@ -39,49 +39,49 @@ This skips over all invalid lines and parses the rest.
 
 #### Find all requests with a 5XX status code
 
-```sh
+```shell
 jq 'select(status >= 500)' <FILE>
 ```
 
 #### Top 10 slowest requests
 
-```sh
+```shell
 jq -s 'sort_by(-.duration) | limit(10; .[])' <FILE>
 ```
 
 #### Find and pretty print all requests related to a project
 
-```sh
+```shell
 grep <PROJECT_NAME> <FILE> | jq .
 ```
 
 #### Find all requests with a total duration > 5 seconds
 
-```sh
+```shell
 jq 'select(.duration > 5000)' <FILE>
 ```
 
 #### Find all project requests with more than 5 rugged calls
 
-```sh
+```shell
 grep <PROJECT_NAME> <FILE> | jq 'select(.rugged_calls > 5)'
 ```
 
 #### Find all requests with a Gitaly duration > 10 seconds
 
-```sh
+```shell
 jq 'select(.gitaly_duration > 10000)' <FILE>
 ```
 
 #### Find all requests with a queue duration > 10 seconds
 
-```sh
+```shell
 jq 'select(.queue_duration > 10000)' <FILE>
 ```
 
 #### Top 10 requests by # of Gitaly calls
 
-```sh
+```shell
 jq -s 'map(select(.gitaly_calls != null)) | sort_by(-.gitaly_calls) | limit(10; .[])' <FILE>
 ```
 
@@ -89,7 +89,7 @@ jq -s 'map(select(.gitaly_calls != null)) | sort_by(-.gitaly_calls) | limit(10;
 
 #### Print the top three controller methods by request volume and their three longest durations
 
-```sh
+```shell
 jq -s -r 'group_by(.controller+.action) | sort_by(-length) | limit(3; .[]) | sort_by(-.duration) | "CT: \(length)\tMETHOD: \(.[0].controller)#\(.[0].action)\tDURS: \(.[0].duration),  \(.[1].duration),  \(.[2].duration)"' production_json.log
 ```
 
@@ -105,7 +105,7 @@ CT: 1328   METHOD: Projects::NotesController#index DURS: 403.99,  386.29,  384.3
 
 #### Print top three routes with request count and their three longest durations
 
-```sh
+```shell
 jq -s -r 'group_by(.route) | sort_by(-length) | limit(3; .[]) | sort_by(-.duration) | "CT: \(length)\tROUTE: \(.[0].route)\tDURS: \(.[0].duration),  \(.[1].duration),  \(.[2].duration)"' api_json.log
 ```
 
@@ -121,25 +121,25 @@ CT: 190  ROUTE: /api/:version/projects/:id/repository/commits    DURS: 1079.02,
 
 #### Find all Gitaly requests sent from web UI
 
-```sh
+```shell
 jq 'select(."grpc.meta.client_name" == "gitlab-web")' current
 ```
 
 #### Find all failed Gitaly requests
 
-```sh
+```shell
 jq 'select(."grpc.code" != null and ."grpc.code" != "OK")' current
 ```
 
 #### Find all requests that took longer than 30 seconds
 
-```sh
+```shell
 jq 'select(."grpc.time_ms" > 30000)' current
 ```
 
 #### Print top three projects by request volume and their three longest durations
 
-```sh
+```shell
 jq -s -r 'map(select(."grpc.request.glProjectPath" != null and ."grpc.request.glProjectPath" != "" and ."grpc.time_ms" != null)) | group_by(."grpc.request.glProjectPath") | sort_by(-length) | limit(3; .[]) | sort_by(-."grpc.time_ms") | "CT: \(length)\tPROJECT: \(.[0]."grpc.request.glProjectPath")\tDURS: \(.[0]."grpc.time_ms"),  \(.[1]."grpc.time_ms"),  \(.[2]."grpc.time_ms")"' current
 ```
 

doc/api/pipeline_schedules.md

@@ -297,7 +297,7 @@ POST /projects/:id/pipeline_schedules/:pipeline_schedule_id/play
 
 Example request:
 
-```sh
+```shell
 curl --request POST --header "PRIVATE-TOKEN: <your_access_token>" 'https://gitlab.example.com/api/v4/projects/42/pipeline_schedules/1/play
 ```
 

doc/api/remote_mirrors.md

@@ -17,7 +17,7 @@ GET /projects/:id/remote_mirrors
 
 Example request:
 
-```sh
+```shell
 curl --header "PRIVATE-TOKEN: <your_access_token>" 'https://gitlab.example.com/api/v4/projects/42/remote_mirrors'
 ```
 
@@ -63,7 +63,7 @@ POST /projects/:id/remote_mirrors
 
 Example request:
 
-```sh
+```shell
 curl --request POST --data "url=https://username:token@example.com/gitlab/example.git" --header "PRIVATE-TOKEN: <your_access_token>" 'https://gitlab.example.com/api/v4/projects/42/remote_mirrors'
 ```
 
@@ -104,7 +104,7 @@ PUT /projects/:id/remote_mirrors/:mirror_id
 
 Example request:
 
-```sh
+```shell
 curl --request PUT --data "enabled=false" --header "PRIVATE-TOKEN: <your_access_token>" 'https://gitlab.example.com/api/v4/projects/42/remote_mirrors/101486'
 ```
 

doc/development/documentation/feature_flags.md

@@ -49,7 +49,7 @@ For feature flags disabled by default, if they can be used by end users:
 For example, for a feature disabled by default, disabled on GitLab.com, and
 not ready for production use:
 
-````md
+````markdown
 # Feature Name
 
 > - [Introduced](link-to-issue) in GitLab 12.0.
@@ -93,7 +93,7 @@ For features that became enabled by default:
 
 For example, for a feature initially deployed disabled by default, that became enabled by default, that is enabled on GitLab.com, and ready for production use:
 
-````md
+````markdown
 # Feature Name
 
 > - [Introduced](link-to-issue) in GitLab 12.0.
@@ -138,7 +138,7 @@ For features enabled by default:
 
 For example, for a feature enabled by default, enabled on GitLab.com, and ready for production use:
 
-````md
+````markdown
 # Feature Name
 
 > - [Introduced](link-to-issue) in GitLab 12.0.
@@ -177,7 +177,7 @@ Once the feature is ready and the flag has been removed, clean up the
 documentation. Remove the feature flag mention keeping only a note that
 mentions the flag in the version history notes:
 
-````md
+````markdown
 # Feature Name
 
 > - [Introduced](link-to-issue) in GitLab 12.0.

doc/development/documentation/index.md

@@ -79,7 +79,7 @@ change prior to merging.
 If you indeed need to change a document's location, do not remove the old
 document, but instead replace all of its content with the following:
 
-```md
+```markdown
 ---
 redirect_to: '../path/to/file/index.md'
 ---
@@ -102,7 +102,7 @@ For example, if you move `doc/workflow/lfs/index.md` to
 1. Copy `doc/workflow/lfs/index.md` to `doc/administration/lfs.md`
 1. Replace the contents of `doc/workflow/lfs/index.md` with:
 
-   ```md
+   ```markdown
    ---
    redirect_to: '../../administration/lfs.md'
    ---

doc/development/documentation/structure.md

@@ -41,7 +41,7 @@ and other logical divisions such as pre- and post-deployment steps.
 To start a new document, respect the file tree and file name guidelines,
 as well as the style guidelines. Use the following template:
 
-```md
+```markdown
 <!--Follow the Style Guide when working on this document. https://docs.gitlab.com/ee/development/documentation/styleguide.html
 When done, remove all of this commented-out text, except a commented-out Troubleshooting section,
 which, if empty, can be left in place to encourage future use.-->

doc/development/documentation/styleguide.md

@@ -390,7 +390,7 @@ tenses, words, and phrases:
 - Insert an empty line for new paragraphs.
 - Insert an empty line between different markups (for example, after every paragraph, header, list, and so on). Example:
 
-  ```md
+  ```markdown
   ## Header
 
   Paragraph.
@@ -447,7 +447,7 @@ Only use ordered lists when their items describe a sequence of steps to follow.
 
 Do:
 
-```md
+```markdown
 These are the steps to do something:
 
 1. First, do the first step.
@@ -457,7 +457,7 @@ These are the steps to do something:
 
 Don't:
 
-```md
+```markdown
 This is a list of available features:
 
 1. Feature 1
@@ -483,7 +483,7 @@ This is a list of available features:
   all with a period.
 - Separate list items from explanatory text with a colon (`:`). For example:
 
-  ```md
+  ```markdown
   The list is as follows:
 
   - First item: this explains the first item.
@@ -792,7 +792,7 @@ Instead:
 
 Example:
 
-```md
+```markdown
 For more information, see the [confidential issue](../../user/project/issues/confidential_issues.md) `https://gitlab.com/gitlab-org/gitlab-foss/issues/<issue_number>`.
 ```
 
@@ -908,7 +908,7 @@ Do not upload videos to the product repositories. [Link](#link-to-video) or [emb
 To link out to a video, include a YouTube icon so that readers can
 quickly and easily scan the page for videos before reading:
 
-```md
+```markdown
 <i class="fa fa-youtube-play youtube" aria-hidden="true"></i>
 For an overview, see [Video Title](link-to-video).
 ```
@@ -1082,7 +1082,7 @@ This will ensure that the source Markdown remains readable and should help with
 
 The following are examples of source Markdown for menu items with their published output:
 
-```md
+```markdown
 1. Go to **{home}** **Project overview > Details**
 1. Go to **{doc-text}** **Repository > Branches**
 1. Go to **{issues}** **Issues > List**
@@ -1143,7 +1143,7 @@ of users.
 Weigh the costs of distracting users to whom the content is not relevant against
 the cost of users missing the content if it were not expressed as a note.
 
-```md
+```markdown
 NOTE: **Note:**
 This is something to note.
 ```
@@ -1155,7 +1155,7 @@ This is something to note.
 
 ### Tip
 
-```md
+```markdown
 TIP: **Tip:**
 This is a tip.
 ```
@@ -1167,7 +1167,7 @@ This is a tip.
 
 ### Caution
 
-```md
+```markdown
 CAUTION: **Caution:**
 This is something to be cautious about.
 ```
@@ -1179,7 +1179,7 @@ This is something to be cautious about.
 
 ### Danger
 
-```md
+```markdown
 DANGER: **Danger:**
 This is a breaking change, a bug, or something very important to note.
 ```
@@ -1193,7 +1193,7 @@ This is a breaking change, a bug, or something very important to note.
 
 For highlighting a text within a blue blockquote, use this format:
 
-```md
+```markdown
 > This is a blockquote.
 ```
 
@@ -1205,7 +1205,7 @@ If the text spans across multiple lines it's OK to split the line.
 
 For multiple paragraphs, use the symbol `>` before every line:
 
-```md
+```markdown
 > This is the first paragraph.
 >
 > This is the second paragraph.
@@ -1298,14 +1298,14 @@ a helpful link back to how the feature was developed.
 - If listing information for multiple version as a feature evolves, add the information to a
   block-quoted bullet list. For example:
 
-  ```md
+  ```markdown
   > - [Introduced](<link-to-issue>) in GitLab 11.3.
   > - Enabled by default in GitLab 11.4.
   ```
 
 - If a feature is moved to another tier:
 
-  ```md
+  ```markdown
   > - [Introduced](<link-to-issue>) in [GitLab Premium](https://about.gitlab.com/pricing/) 11.5.
   > - [Moved](<link-to-issue>) to [GitLab Starter](https://about.gitlab.com/pricing/) in 11.8.
   > - [Moved](<link-to-issue>) to GitLab Core in 12.0.
@@ -1417,7 +1417,7 @@ avoid duplication, link to the special document that can be found in
 [`doc/administration/restart_gitlab.md`](../../administration/restart_gitlab.md).
 Usually the text will read like:
 
-```md
+```markdown
 Save the file and [reconfigure GitLab](../../administration/restart_gitlab.md)
 for the changes to take effect.
 ```
@@ -1453,7 +1453,7 @@ When there is a list of steps to perform, usually that entails editing the
 configuration file and reconfiguring/restarting GitLab. In such case, follow
 the style below as a guide:
 
-````md
+````markdown
 **For Omnibus installations**
 
 1. Edit `/etc/gitlab/gitlab.rb`:
@@ -1591,7 +1591,7 @@ You can use the following fake tokens as examples.
 Use the following table headers to describe the methods. Attributes should
 always be in code blocks using backticks (`` ` ``).
 
-```md
+```markdown
 | Attribute | Type | Required | Description |
 |:----------|:-----|:---------|:------------|
 ```

doc/development/fe_guide/droplab/droplab.md

@@ -26,7 +26,7 @@ If you do not provide any arguments, it will globally query and instantiate all
 <ul>
 ```
 
-```js
+```javascript
 const droplab = new DropLab();
 droplab.init();
 ```
@@ -47,7 +47,7 @@ You can add static list items.
 <ul>
 ```
 
-```js
+```javascript
 const droplab = new DropLab();
 droplab.init();
 ```
@@ -65,7 +65,7 @@ a non-global instance of DropLab using the `DropLab.prototype.init` method.
 <ul>
 ```
 
-```js
+```javascript
 const trigger = document.getElementById('trigger');
 const list = document.getElementById('list');
 
@@ -83,7 +83,7 @@ You can also add hooks to an existing DropLab instance using `DropLab.prototype.
 <ul id="list" data-dropdown><!-- ... --><ul>
 ```
 
-```js
+```javascript
 const droplab = new DropLab();
 
 droplab.init();
@@ -114,7 +114,7 @@ for all `data-dynamic` dropdown lists tracked by that DropLab instance.
 </ul>
 ```
 
-```js
+```javascript
 const droplab = new DropLab();
 
 droplab.init().addData([{
@@ -137,7 +137,7 @@ the data as the second argument and the `id` of the trigger element as the first
 </ul>
 ```
 
-```js
+```javascript
 const droplab = new DropLab();
 
 droplab.init().addData('trigger', [{
@@ -167,7 +167,7 @@ dropdown lists, one of which is dynamic.
 </div>
 ```
 
-```js
+```javascript
 const droplab = new DropLab();
 
 droplab.init().addData('trigger', [{
@@ -224,7 +224,7 @@ Some plugins require configuration values, the config object can be passed as th
 <ul id="list" data-dropdown><!-- ... --><ul>
 ```
 
-```js
+```javascript
 const droplab = new DropLab();
 
 const trigger = document.getElementById('trigger');
@@ -249,7 +249,7 @@ droplab.init(trigger, list, [droplabAjax], {
 When plugins are initialised for a droplab trigger+dropdown, DropLab will
 call the plugins `init` function, so this must be implemented in the plugin.
 
-```js
+```javascript
 class MyPlugin {
   static init() {
     this.someProp = 'someProp';

doc/development/fe_guide/droplab/plugins/ajax.md

@@ -18,7 +18,7 @@ Add the `Ajax` object to the plugins array of a `DropLab.prototype.init` or `Dro
 <ul id="list" data-dropdown><!-- ... --><ul>
 ```
 
-```js
+```javascript
 const droplab = new DropLab();
 
 const trigger = document.getElementById('trigger');

doc/development/fe_guide/droplab/plugins/filter.md

@@ -18,7 +18,7 @@ Add the `Filter` object to the plugins array of a `DropLab.prototype.init` or `D
 <ul>
 ```
 
-```js
+```javascript
 const droplab = new DropLab();
 
 const trigger = document.getElementById('trigger');

doc/development/fe_guide/droplab/plugins/input_setter.md

@@ -23,7 +23,7 @@ You can also set the `InputSetter` config to an array of objects, which will all
 <ul>
 ```
 
-```js
+```javascript
 const droplab = new DropLab();
 
 const trigger = document.getElementById('trigger');

doc/development/fe_guide/graphql.md

@@ -212,7 +212,7 @@ Read more about local state management with Apollo in the [Vue Apollo documentat
 
 When Apollo Client is used within Vuex and fetched data is stored in the Vuex store, there is no need in keeping Apollo Client cache enabled. Otherwise we would have data from the API stored in two places - Vuex store and Apollo Client cache. More to say, with Apollo default settings, a subsequent fetch from the GraphQL API could result in fetching data from Apollo cache (in the case where we have the same query and variables). To prevent this behavior, we need to disable Apollo Client cache passing a valid `fetchPolicy` option to its constructor:
 
-```js
+```javascript
 import fetchPolicies from '~/graphql_shared/fetch_policy_constants';
 
 export const gqClient = createGqClient(

doc/development/fe_guide/vue3_migration.md

@@ -111,7 +111,7 @@ export default {
 </template>
 ```
 
-```js
+```javascript
 // MyAwesomeComponent.spec.js
 
 import SomeChildComponent from '~/some_child_component.vue'

doc/development/i18n/externalization.md

@@ -131,7 +131,7 @@ You can mark that content for translation with:
 In JavaScript we added the `__()` (double underscore parenthesis) function that
 you can import from the `~/locale` file. For instance:
 
-```js
+```javascript
 import { __ } from '~/locale';
 const label = __('Subscribe');
 ```
@@ -167,7 +167,7 @@ For example use `%{created_at}` in Ruby but `%{createdAt}` in JavaScript. Make s
 
 - In JavaScript (when Vue cannot be used):
 
-  ```js
+  ```javascript
   import { __, sprintf } from '~/locale';
 
   sprintf(__('Hello %{username}'), { username: 'Joe' }); // => 'Hello Joe'
@@ -180,7 +180,7 @@ For example use `%{created_at}` in Ruby but `%{createdAt}` in JavaScript. Make s
   escape any interpolated dynamic values yourself, for instance using
   `escape` from `lodash`.
 
-  ```js
+  ```javascript
   import { escape } from 'lodash';
   import { __, sprintf } from '~/locale';
 
@@ -220,14 +220,14 @@ For example use `%{created_at}` in Ruby but `%{createdAt}` in JavaScript. Make s
 
 - In JavaScript:
 
-  ```js
+  ```javascript
   n__('Apple', 'Apples', 3)
   // => 'Apples'
   ```
 
   Using interpolation:
 
-  ```js
+  ```javascript
   n__('Last day', 'Last %d days', x)
   // => When x == 1: 'Last day'
   // => When x == 2: 'Last 2 days'
@@ -274,7 +274,7 @@ Namespaces should be PascalCase.
 
 - In JavaScript:
 
-  ```js
+  ```javascript
   s__('OpenedNDaysAgo|Opened')
   ```
 
@@ -285,7 +285,7 @@ guidelines for more details](translation.md#namespaced-strings).
 
 - In JavaScript:
 
-```js
+```javascript
 import { createDateTimeFormat } from '~/locale';
 
 const dateFormat = createDateTimeFormat({ year: 'numeric', month: 'long', day: 'numeric' });
@@ -372,7 +372,7 @@ structure is the same in all languages.
 
 For instance, the following:
 
-```js
+```javascript
 {{ s__("mrWidget|Set by") }}
 {{ author.name }}
 {{ s__("mrWidget|to be merged automatically when the pipeline succeeds") }}
@@ -380,7 +380,7 @@ For instance, the following:
 
 should be externalized as follows:
 
-```js
+```javascript
 {{ sprintf(s__("mrWidget|Set by %{author} to be merged automatically when the pipeline succeeds"), { author: author.name }) }}
 ```
 
@@ -439,7 +439,7 @@ This also applies when using links in between translated sentences, otherwise th
 
 - In JavaScript (when Vue cannot be used), instead of:
 
-  ```js
+  ```javascript
   {{
       sprintf(s__("ClusterIntegration|Learn more about %{link}"), {
           link: '<a href="https://cloud.google.com/compute/docs/regions-zones/regions-zones" target="_blank" rel="noopener noreferrer">zones</a>'
@@ -449,7 +449,7 @@ This also applies when using links in between translated sentences, otherwise th
 
   Set the link starting and ending HTML fragments as placeholders like so:
 
-  ```js
+  ```javascript
   {{
       sprintf(s__("ClusterIntegration|Learn more about %{linkStart}zones%{linkEnd}"), {
           linkStart: '<a href="https://cloud.google.com/compute/docs/regions-zones/regions-zones" target="_blank" rel="noopener noreferrer">',

doc/development/migration_style_guide.md

@@ -51,7 +51,7 @@ or `db/post_migrate`, so if there are any migrations you don't want to
 commit to the schema, rename or remove them. If your branch is not
 targetting `master` you can set the `TARGET` environment variable.
 
-```sh
+```shell
 # Regenerate schema against `master`
 scripts/regenerate-schema
 

doc/development/new_fe_guide/modules/dirty_submit.md

@@ -13,7 +13,7 @@ within the GitLab project.
 
 ## Usage
 
-```js
+```javascript
 import dirtySubmitFactory from './dirty_submit/dirty_submit_form';
 
 new DirtySubmitForm(document.querySelector('form'));

doc/topics/airgap/index.md

@@ -98,7 +98,7 @@ If it's not possible to follow the above method, the images can be transferred m
 
 #### Example image packager script
 
-```sh
+```shell
 #!/bin/bash
 set -ux
 
@@ -120,7 +120,7 @@ done
 This example loads the images from a bastion host to an offline host. In certain configurations,
 physical media may be needed for such a transfer:
 
-```sh
+```shell
 #!/bin/bash
 set -ux
 

doc/topics/autodevops/upgrading_postgresql.md

@@ -39,7 +39,7 @@ being modified after the database dump is created.
 1. Get the Kubernetes namespace for the environment. It typically looks like `<project-name>-<project-id>-<environment>`.
    In our example, the namespace is called `minimal-ruby-app-4349298-production`.
 
-    ```sh
+    ```shell
     $ kubectl get ns
 
     NAME                                                  STATUS   AGE
@@ -48,13 +48,13 @@ being modified after the database dump is created.
 
 1. For ease of use, export the namespace name:
 
-   ```sh
+   ```shell
    export APP_NAMESPACE=minimal-ruby-app-4349298-production
    ```
 
 1. Get the deployment name for your application with the following command. In our example, the deployment name is `production`.
 
-    ```sh
+    ```shell
     $ kubectl get deployment --namespace "$APP_NAMESPACE"
     NAME                  READY   UP-TO-DATE   AVAILABLE   AGE
     production            2/2     2            2           7d21h
@@ -64,7 +64,7 @@ being modified after the database dump is created.
 1. To prevent the database from being modified, set replicas to 0 for the deployment with the following command.
    We use the deployment name from the previous step (`deployments/<DEPLOYMENT_NAME>`).
 
-    ```sh
+    ```shell
     $ kubectl scale --replicas=0 deployments/production --namespace "$APP_NAMESPACE"
     deployment.extensions/production scaled
     ```
@@ -75,7 +75,7 @@ being modified after the database dump is created.
 
 1. Get the service name for PostgreSQL. The name of the service should end with `-postgres`. In our example the service name is `production-postgres`.
 
-    ```sh
+    ```shell
     $ kubectl get svc --namespace "$APP_NAMESPACE"
     NAME                     TYPE        CLUSTER-IP    EXTERNAL-IP   PORT(S)    AGE
     production-auto-deploy   ClusterIP   10.30.13.90   <none>        5000/TCP   7d14h
@@ -84,7 +84,7 @@ being modified after the database dump is created.
 
 1. Get the pod name for PostgreSQL with the following command. In our example, the pod name is `production-postgres-5db86568d7-qxlxv`.
 
-    ```sh
+    ```shell
     $ kubectl get pod --namespace "$APP_NAMESPACE" -l app=production-postgres
     NAME                                   READY   STATUS    RESTARTS   AGE
     production-postgres-5db86568d7-qxlxv   1/1     Running   0          7d14h
@@ -92,7 +92,7 @@ being modified after the database dump is created.
 
 1. Connect to the pod with:
 
-    ```sh
+    ```shell
     kubectl exec -it production-postgres-5db86568d7-qxlxv --namespace "$APP_NAMESPACE" bash
     ```
 
@@ -104,7 +104,7 @@ being modified after the database dump is created.
 
    - You will be asked for the database password, the default is `testing-password`.
 
-    ```sh
+    ```shell
     ## Format is:
     # pg_dump -h SERVICE_NAME -U USERNAME DATABASE_NAME > /tmp/backup.sql
 
@@ -115,7 +115,7 @@ being modified after the database dump is created.
 
 1. Download the dump file with the following command:
 
-    ```sh
+    ```shell
     kubectl cp --namespace "$APP_NAMESPACE" production-postgres-5db86568d7-qxlxv:/tmp/backup.sql backup.sql
     ```
 
@@ -131,7 +131,7 @@ deleted causing the persistent volumes to be deleted as well.
 
 You can verify this by using the following command:
 
-```sh
+```shell
 $ kubectl get pv
 NAME                                       CAPACITY   ACCESS MODES   RECLAIM POLICY   STATUS   CLAIM                                                     STORAGECLASS   REASON   AGE
 pvc-0da80c08-5239-11ea-9c8d-42010a8e0096   8Gi        RWO            Delete           Bound    minimal-ruby-app-4349298-staging/staging-postgres         standard                7d22h
@@ -145,7 +145,7 @@ interested in keeping the volumes for the staging and production of the
 `minimal-ruby-app-4349298` application, the volume names here are
 `pvc-0da80c08-5239-11ea-9c8d-42010a8e0096` and `pvc-9085e3d3-5239-11ea-9c8d-42010a8e0096`:
 
-```sh
+```shell
 $ kubectl patch pv  pvc-0da80c08-5239-11ea-9c8d-42010a8e0096 -p '{"spec":{"persistentVolumeReclaimPolicy":"Retain"}}'
 persistentvolume/pvc-0da80c08-5239-11ea-9c8d-42010a8e0096 patched
 $ kubectl patch pv  pvc-9085e3d3-5239-11ea-9c8d-42010a8e0096 -p '{"spec":{"persistentVolumeReclaimPolicy":"Retain"}}'
@@ -192,7 +192,7 @@ TIP: **Tip:** You can also
 1. Get the pod name for the new PostgreSQL, in our example, the pod name is
    `production-postgresql-0`:
 
-    ```sh
+    ```shell
     $ kubectl get pod --namespace "$APP_NAMESPACE" -l app=postgresql
     NAME                      READY   STATUS    RESTARTS   AGE
     production-postgresql-0   1/1     Running   0          19m
@@ -200,13 +200,13 @@ TIP: **Tip:** You can also
 
 1. Copy the dump file from the backup steps to the pod:
 
-   ```sh
+   ```shell
    kubectl cp --namespace "$APP_NAMESPACE" backup.sql production-postgresql-0:/tmp/backup.sql
    ```
 
 1. Connect to the pod:
 
-   ```sh
+   ```shell
    kubectl exec -it production-postgresql-0 --namespace "$APP_NAMESPACE" bash
    ```
 
@@ -216,7 +216,7 @@ TIP: **Tip:** You can also
    - `USERNAME` is the username you have configured for PostgreSQL. The default is `user`.
    - `DATABASE_NAME` is usually the environment name.
 
-   ```sh
+   ```shell
    ## Format is:
    # psql -U USERNAME -d DATABASE_NAME < /tmp/backup.sql
 

doc/user/markdown.md

@@ -228,7 +228,7 @@ To make PlantUML available in GitLab, a GitLab administrator needs to enable it
 
 > If this is not rendered correctly, [view it in GitLab itself](https://gitlab.com/gitlab-org/gitlab/blob/master/doc/user/markdown.md#emoji).
 
-```md
+```markdown
 Sometimes you want to :monkey: around a bit and add some :star2: to your :speech_balloon:. Well we have a gift for you:
 
 :zap: You can use emoji anywhere GFM is supported. :v:
@@ -804,7 +804,7 @@ but_emphasis is_desired _here_
 
 If you wish to emphasize only a part of a word, it can still be done with asterisks:
 
-```md
+```markdown
 perform*complicated*task
 
 do*this*and*do*that*and*another thing
@@ -976,7 +976,7 @@ Do not change to a reference style link.
 Image tags that link to files with a video extension are automatically converted to
 a video player. The valid video extensions are `.mp4`, `.m4v`, `.mov`, `.webm`, and `.ogv`:
 
-```md
+```markdown
 Here's a sample video:
 
 ![Sample Video](img/markdown_video.mp4)
@@ -993,7 +993,7 @@ Here's a sample video:
 Similar to videos, link tags for files with an audio extension are automatically converted to
 an audio player. The valid audio extensions are `.mp3`, `.oga`, `.ogg`, `.spx`, and `.wav`:
 
-```md
+```markdown
 Here's a sample audio clip:
 
 ![Sample Audio](img/markdown_audio.mp3)
@@ -1275,7 +1275,7 @@ number, and count up from there.
 
 Examples:
 
-```md
+```markdown
 1. First ordered list item
 2. Another item
    - Unordered sub-list.
@@ -1302,7 +1302,7 @@ See https://docs.gitlab.com/ee/development/documentation/styleguide.html#lists
 For an unordered list, add a `-`, `*` or `+`, followed by a space, at the start of
 each line for unordered lists, but you should not use a mix of them.
 
-```md
+```markdown
 Unordered lists can:
 
 - use

doc/user/packages/container_registry/index.md

@@ -137,7 +137,7 @@ The minimum scope needed for both of them is `read_registry`.
 
 Example of using a token:
 
-```sh
+```shell
 docker login registry.example.com -u <username> -p <token>
 ```
 
@@ -206,7 +206,7 @@ Available for all projects, though more suitable for public ones:
   your Docker images and has read/write access to the Registry. This is ephemeral,
   so it's only valid for one job. You can use the following example as-is:
 
-  ```sh
+  ```shell
   docker login -u $CI_REGISTRY_USER -p $CI_REGISTRY_PASSWORD $CI_REGISTRY
   ```
 
@@ -221,7 +221,7 @@ For private and internal projects:
 
   Replace the `<username>` and `<access_token>` in the following example:
 
-  ```sh
+  ```shell
   docker login -u <username> -p <access_token> $CI_REGISTRY
   ```
 
@@ -231,7 +231,7 @@ For private and internal projects:
   Once created, you can use the special environment variables, and GitLab CI/CD
   will fill them in for you. You can use the following example as-is:
 
-  ```sh
+  ```shell
   docker login -u $CI_DEPLOY_USER -p $CI_DEPLOY_PASSWORD $CI_REGISTRY
   ```
 

doc/user/project/issues/managing_issues.md

@@ -183,7 +183,7 @@ but it will not close automatically.
 
 If the issue is in a different repository than the MR, add the full URL for the issue(s):
 
-```md
+```markdown
 Closes #4, #6, and https://gitlab.com/<username>/<projectname>/issues/<xxx>
 ```
 

doc/user/project/repository/x509_signed_commits/index.md

@@ -47,7 +47,7 @@ and some of them generate keys for free.
 To take advantage of X.509 signing, you will need Git 2.19.0 or later. You can
 check your Git version with:
 
-```sh
+```shell
 git --version
 ```
 
@@ -57,7 +57,7 @@ If you have the correct version, you can proceed to configure Git.
 
 Configure Git to use your key for signing:
 
-```sh
+```shell
 signingkey = $( gpgsm --list-secret-keys | egrep '(key usage|ID)' | grep -B 1 digitalSignature | awk '/ID/ {print $2}' )
 git config --global user.signingkey $signingkey
 git config --global gpg.format x509
@@ -71,7 +71,7 @@ installer or via `brew install smimesign` on MacOS.
 Get the ID of your certificate with `smimesign --list-keys` and set your
 signingkey `git config --global user.signingkey ID`, then configure X.509:
 
-```sh
+```shell
 git config --global gpg.x509.program smimesign
 git config --global gpg.format x509
 ```
@@ -83,7 +83,7 @@ can start signing your commits:
 
 1. Commit like you used to, the only difference is the addition of the `-S` flag:
 
-   ```sh
+   ```shell
    git commit -S -m "feat: x509 signed commits"
    ```
 
@@ -92,7 +92,7 @@ can start signing your commits:
 If you don't want to type the `-S` flag every time you commit, you can tell Git
 to sign your commits automatically:
 
-```sh
+```shell
 git config --global commit.gpgsign true
 ```
 
@@ -100,7 +100,7 @@ git config --global commit.gpgsign true
 
 To verify that a commit is signed, you can use the `--show-signature` flag:
 
-```sh
+```shell
 git log --show-signature
 ```
 
@@ -111,7 +111,7 @@ can start signing your tags:
 
 1. Tag like you used to, the only difference is the addition of the `-s` flag:
 
-   ```sh
+   ```shell
    git tag -s v1.1.1 -m "My signed tag"
    ```
 
@@ -120,7 +120,7 @@ can start signing your tags:
 If you don't want to type the `-s` flag every time you tag, you can tell Git
 to sign your tags automatically:
 
-```sh
+```shell
 git config --global tag.gpgsign true
 ```
 
@@ -128,6 +128,6 @@ git config --global tag.gpgsign true
 
 To verify that a tag is signed, you can use the `--verify` flag:
 
-```sh
+```shell
 git tag --verify v1.1.1
 ```