Merge branch '276207-vale-substitutions-warning-part-04' into 'master'

Docs: clean up some Vale substitution warnings

See merge request gitlab-org/gitlab!51051

doc/update/mysql_to_postgresql.md

@@ -142,7 +142,7 @@ new PostgreSQL one:
    sudo -u gitlab-psql pgloader commands.load
    ```
 
-1. Once the migration finishes, you should see a summary table that looks like
+1. After the migration finishes, you should see a summary table that looks like
    the following:
 
    ```plaintext
@@ -243,7 +243,7 @@ new PostgreSQL one:
    sudo -u postgres pgloader commands.load
    ```
 
-1. Once the migration finishes, you should see a summary table that looks like
+1. After the migration finishes, you should see a summary table that looks like
    the following:
 
    ```plaintext

doc/update/upgrading_postgresql_using_slony.md

@@ -40,7 +40,7 @@ If you're not using the Omnibus GitLab package you may have to adjust the paths
 `pg_dump` and the PostgreSQL installation directory to match the paths of your
 configuration.
 
-Once the structure dump is generated we also need to generate a dump for the
+After the structure dump is generated we also need to generate a dump for the
 `schema_migrations` table. This table doesn't have any primary keys and as such
 can't be replicated easily by Slony. To generate this dump run the following
 command on your active database server:
@@ -210,7 +210,7 @@ this output, don't just append it below it. The result looks like this:
 ]
 ```
 
-Once you have the configuration file generated you must install it on both the
+After you have the configuration file generated you must install it on both the
 old and new database. To do so, place it in
 `/var/opt/gitlab/postgresql/slony/slon_tools.conf` (for which we created the
 directory earlier on).
@@ -218,7 +218,7 @@ directory earlier on).
 Now that the configuration file is in place we can _finally_ start replicating
 our database. First we must set up the schema in our new database. To do so make
 sure that the SQL files we generated earlier can be found in the `/tmp`
-directory of the new server. Once these files are in place start a `psql`
+directory of the new server. After these files are in place start a `psql`
 session on this server:
 
 ```shell

doc/user/admin_area/appearance.md

@@ -20,7 +20,7 @@ used (less than 1MB) and it is automatically resized.
 
 ![Navigation bar header logo screenshot](img/appearance_header_logo_v12_3.png)
 
-Once you select and upload an image, click **Update appearance settings** at the bottom
+After you select and upload an image, click **Update appearance settings** at the bottom
 of the page to activate it in the GitLab instance.
 
 NOTE:

doc/user/admin_area/settings/email.md

@@ -40,7 +40,7 @@ In order to change this option:
 1. Select **Save changes**.
 
 NOTE:
-Once the hostname gets configured, every private commit email using the previous hostname, will not get
+After the hostname gets configured, every private commit email using the previous hostname is not
 recognized by GitLab. This can directly conflict with certain [Push rules](../../../push_rules/push_rules.md) such as
 `Check whether author is a GitLab user` and `Check whether committer is the current authenticated user`.
 

doc/user/admin_area/settings/sign_in_restrictions.md

@@ -27,7 +27,7 @@ You can restrict the password authentication for web interface and Git over HTTP
 
 When this feature enabled, all users must use the [two-factor authentication](../../profile/account/two_factor_authentication.md).
 
-Once the two-factor authentication is configured as mandatory, the users are allowed
+After the two-factor authentication is configured as mandatory, users are allowed
 to skip forced configuration of two-factor authentication for the configurable grace
 period in hours.
 

doc/user/application_security/index.md

@@ -267,7 +267,7 @@ You can dismiss multiple vulnerabilities at once, providing an optional reason.
 Selecting the checkboxes on the side of each vulnerability in the list selects that individual vulnerability.
 Alternatively, you can select all the vulnerabilities in the list by selecting the checkbox in the table header.
 Deselecting the checkbox in the header deselects all the vulnerabilities in the list.
-Once you have selected some vulnerabilities, a menu appears at the top of the table that allows you to select a dismissal reason.
+After you have selected some vulnerabilities, a menu appears at the top of the table that allows you to select a dismissal reason.
 Pressing the "Dismiss Selected" button dismisses all the selected vulnerabilities at once, with the reason you chose.
 
 ![Multiple vulnerability dismissal](img/multi_select_v12_9.png)
@@ -281,7 +281,7 @@ You can create an issue for a vulnerability by visiting the vulnerability's page
 
 This creates a [confidential issue](../project/issues/confidential_issues.md) in the project the
 vulnerability came from, and pre-populates it with some useful information taken from the vulnerability
-report. Once the issue is created, you are redirected to it so you can edit, assign, or comment on
+report. After the issue is created, you are redirected to it so you can edit, assign, or comment on
 it.
 
 Upon returning to the group security dashboard, the vulnerability now has an associated issue next

doc/user/application_security/security_dashboard/index.md

@@ -267,7 +267,7 @@ To create an issue associated with the vulnerability, click the **Create Issue**
 
 ![Create an issue for the vulnerability](img/vulnerability_details_create_issue_v13_7.png)
 
-Once you create the issue, the linked issue icon in the vulnerability list:
+After you create the issue, the linked issue icon in the vulnerability list:
 
 - Indicates that an issue has been created for that vulnerability.
 - Shows a tooltip that contains a link to the issue.

doc/user/clusters/environments.md

@@ -38,7 +38,7 @@ In order to:
 - Show pod usage correctly, you must
   [enable Deploy Boards](../project/deploy_boards.md#enabling-deploy-boards).
 
-Once you have successful deployments to your group-level or instance-level cluster:
+After you have successful deployments to your group-level or instance-level cluster:
 
 1. Navigate to your group's **Kubernetes** page.
 1. Click on the **Environments** tab.

doc/user/discussions/index.md

@@ -370,7 +370,7 @@ From a merge request's **Discussion** tab, or from an epic/issue overview, find
 
 ![Notes filters dropdown options](img/index_notes_filters.png)
 
-Once you select one of the filters in a given issue or MR, GitLab will save
+After you select one of the filters in a given issue or MR, GitLab will save
 your preference, so that it will persist when you visit the same page again
 from any device you're logged into.
 
@@ -401,7 +401,7 @@ the merge request authored by the user that applied them.
 
    ![Apply suggestions](img/apply_suggestion_v12_7.png)
 
-Once the author applies a Suggestion, it will be marked with the **Applied** label,
+After the author applies a Suggestion, it will be marked with the **Applied** label,
 the thread will be automatically resolved, and GitLab will create a new commit
 and push the suggested change directly into the codebase in the merge request's
 branch. [Developer permission](../permissions.md) is required to do so.
@@ -537,7 +537,7 @@ Clicking on the **Reply to comment** button will bring the reply area into focus
 ![Reply to comment feature](img/reply_to_comment.gif)
 
 Replying to a non-thread comment will convert the non-thread comment to a
-thread once the reply is submitted. This conversion is considered an edit
+thread after the reply is submitted. This conversion is considered an edit
 to the original comment, so a note about when it was last edited will appear underneath it.
 
 This feature only exists for Issues, Merge requests, and Epics. Commits, Snippets and Merge request diff threads are

doc/user/group/settings/import_export.md

@@ -69,7 +69,7 @@ For more details on the specific data persisted in a group export, see the
 
    ![Export group panel](img/export_panel_v13_0.png)
 
-1. Once the export is generated, you should receive an e-mail with a link to the [exported contents](#exported-contents)
+1. After the export is generated, you should receive an e-mail with a link to the [exported contents](#exported-contents)
    in a compressed tar archive, with contents in JSON format.
 
 1. Alternatively, you can come back to the project settings and download the

doc/user/profile/account/two_factor_authentication.md

@@ -384,7 +384,7 @@ codes. If you saved these codes, you can use one of them to sign in.
 To use a recovery code, enter your username/email and password on the GitLab
 sign-in page. When prompted for a two-factor code, enter the recovery code.
 
-Once you use a recovery code, you cannot re-use it. You can still use the other
+After you use a recovery code, you cannot re-use it. You can still use the other
 recovery codes you saved.
 
 ### Generate new recovery codes using SSH