Merge branch 'docs-update-redirected-links-4' into 'master'

Find and replace gitlab issue links in /doc/administration

See merge request gitlab-org/gitlab!32624

doc/administration/audit_events.md

@@ -36,7 +36,7 @@ There are two kinds of events logged:
 
 ### Impersonation data **(PREMIUM)**
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/536) in [GitLab Premium](https://about.gitlab.com/pricing/) 13.0.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/536) in [GitLab Premium](https://about.gitlab.com/pricing/) 13.0.
 
 Impersonation is where an administrator uses credentials to perform an action as a different user.
 
@@ -93,13 +93,13 @@ From there, you can see the following actions:
 - Release was added to a project
 - Release was updated
 - Release milestone associations changed
-- Permission to approve merge requests by committers was updated ([introduced](https://gitlab.com/gitlab-org/gitlab/issues/7531) in GitLab 12.9)
-- Permission to approve merge requests by authors was updated ([introduced](https://gitlab.com/gitlab-org/gitlab/issues/7531) in GitLab 12.9)
-- Number of required approvals was updated ([introduced](https://gitlab.com/gitlab-org/gitlab/issues/7531) in GitLab 12.9)
+- Permission to approve merge requests by committers was updated ([introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/7531) in GitLab 12.9)
+- Permission to approve merge requests by authors was updated ([introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/7531) in GitLab 12.9)
+- Number of required approvals was updated ([introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/7531) in GitLab 12.9)
 
 ### Instance events **(PREMIUM ONLY)**
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/2336) in [GitLab Premium](https://about.gitlab.com/pricing/) 9.3.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/2336) in [GitLab Premium](https://about.gitlab.com/pricing/) 9.3.
 
 Server-wide audit logging introduces the ability to observe user actions across
 the entire instance of your GitLab server, making it easy to understand who
@@ -118,10 +118,10 @@ recorded:
 - Ask for password reset
 - Grant OAuth access
 - Started or stopped user impersonation
-- Changed username ([introduced](https://gitlab.com/gitlab-org/gitlab/issues/7797) in GitLab 12.8)
-- User was deleted ([introduced](https://gitlab.com/gitlab-org/gitlab/issues/251) in GitLab 12.8)
-- User was added ([introduced](https://gitlab.com/gitlab-org/gitlab/issues/251) in GitLab 12.8)
-- User was blocked via Admin Area ([introduced](https://gitlab.com/gitlab-org/gitlab/issues/251) in GitLab 12.8)
+- Changed username ([introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/7797) in GitLab 12.8)
+- User was deleted ([introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/251) in GitLab 12.8)
+- User was added ([introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/251) in GitLab 12.8)
+- User was blocked via Admin Area ([introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/251) in GitLab 12.8)
 - User was blocked via API ([introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/25872) in GitLab 12.9)
 
 It's possible to filter particular actions by choosing an audit data type from
@@ -152,7 +152,7 @@ It may make the user interface for your project or audit logs very busy, and the
 to prevent performance degradations on GitLab instances with very high Git write traffic.
 
 In an upcoming release, Audit Logs for Git push events will be enabled
-by default. Follow [#7865](https://gitlab.com/gitlab-org/gitlab/issues/7865) for updates.
+by default. Follow [#7865](https://gitlab.com/gitlab-org/gitlab/-/issues/7865) for updates.
 
 If you still wish to enable **Repository push** events in your instance, follow
 the steps bellow.

doc/administration/auth/google_secure_ldap.md

@@ -4,7 +4,7 @@ type: reference
 
 # Google Secure LDAP **(CORE ONLY)**
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/46391) in GitLab 11.9.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/46391) in GitLab 11.9.
 
 [Google Cloud Identity](https://cloud.google.com/identity/) provides a Secure
 LDAP service that can be configured with GitLab for authentication and group sync.

doc/administration/auth/how_to_configure_ldap_gitlab_ee/index.md

@@ -12,7 +12,7 @@ This article expands on [How to Configure LDAP with GitLab CE](../how_to_configu
 
 - [Administrator Sync](../ldap-ee.md#administrator-sync): As an extension of group sync, you can automatically manage your global GitLab administrators. Specify a group CN for `admin_group` and all members of the LDAP group will be given administrator privileges.
 - [Group Sync](#group-sync): This allows GitLab group membership to be automatically updated based on LDAP group members.
-- [Multiple LDAP servers](#multiple-ldap-servers): The ability to configure multiple LDAP servers. This is useful if an organization has different LDAP servers within departments. This is not designed for failover. We're working on [supporting LDAP failover](https://gitlab.com/gitlab-org/gitlab/issues/139) in GitLab.
+- [Multiple LDAP servers](#multiple-ldap-servers): The ability to configure multiple LDAP servers. This is useful if an organization has different LDAP servers within departments. This is not designed for failover. We're working on [supporting LDAP failover](https://gitlab.com/gitlab-org/gitlab/-/issues/139) in GitLab.
 
 - Daily user synchronization: Once a day, GitLab will run a synchronization to check and update GitLab users against LDAP. This process updates all user details automatically.
 

doc/administration/auth/smartcard.md

@@ -8,7 +8,7 @@ GitLab supports authentication using smartcards.
 
 ## Existing password authentication
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/33669) in GitLab 12.6.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/33669) in GitLab 12.6.
 
 By default, existing users can continue to log in with a username and password when smartcard
 authentication is enabled.
@@ -25,7 +25,7 @@ GitLab supports two authentication methods:
 
 ### Authentication against a local database with X.509 certificates
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/726) in [GitLab Premium](https://about.gitlab.com/pricing/) 11.6 as an experimental feature.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/726) in [GitLab Premium](https://about.gitlab.com/pricing/) 11.6 as an experimental feature.
 
 CAUTION: **Caution:**
 Smartcard authentication against local databases may change or be removed completely in future
@@ -52,7 +52,7 @@ Certificate:
 
 ### Authentication against a local database with X.509 certificates and SAN extension
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/8605) in [GitLab Premium](https://about.gitlab.com/pricing/) 12.3.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/8605) in [GitLab Premium](https://about.gitlab.com/pricing/) 12.3.
 
 Smartcards with X.509 certificates using SAN extensions can be used to authenticate
 with GitLab.
@@ -67,7 +67,7 @@ database with GitLab, in:
 - GitLab 12.4 and later, at least one of the `subjectAltName` (SAN) extensions
   need to define the user identity (`email`) within the GitLab instance (`URI`).
   `URI`: needs to match `Gitlab.config.host.gitlab`.
-- From [GitLab 12.5](https://gitlab.com/gitlab-org/gitlab/issues/33907),
+- From [GitLab 12.5](https://gitlab.com/gitlab-org/gitlab/-/issues/33907),
   if your certificate contains only **one** SAN email entry, you don't need to
   add or modify it to match the `email` with the `URI`.
 
@@ -95,7 +95,7 @@ Certificate:
 
 ### Authentication against an LDAP server
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/7693) in [GitLab Premium](https://about.gitlab.com/pricing/) 11.8 as an experimental feature. Smartcard authentication against an LDAP server may change or be removed completely in future releases.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/7693) in [GitLab Premium](https://about.gitlab.com/pricing/) 11.8 as an experimental feature. Smartcard authentication against an LDAP server may change or be removed completely in future releases.
 
 GitLab implements a standard way of certificate matching following
 [RFC4523](https://tools.ietf.org/html/rfc4523). It uses the

doc/administration/feature_flags.md

@@ -29,7 +29,7 @@ them. It can be done by GitLab administrators with access to GitLab Rails
 console.
 
 If you used a certain feature and identified a bug, a misbehavior, or an
-error, it's very important that you [**provide feedback**](https://gitlab.com/gitlab-org/gitlab/issues/new?issue[title]=Docs%20-%20feature%20flag%20feedback%3A%20Feature%20Name&issue[description]=Describe%20the%20problem%20you%27ve%20encountered.%0A%0A%3C!--%20Don%27t%20edit%20below%20this%20line%20--%3E%0A%0A%2Flabel%20~%22docs%5C-comments%22%20) to GitLab as soon
+error, it's very important that you [**provide feedback**](https://gitlab.com/gitlab-org/gitlab/-/issues/new?issue[title]=Docs%20-%20feature%20flag%20feedback%3A%20Feature%20Name&issue[description]=Describe%20the%20problem%20you%27ve%20encountered.%0A%0A%3C!--%20Don%27t%20edit%20below%20this%20line%20--%3E%0A%0A%2Flabel%20~%22docs%5C-comments%22%20) to GitLab as soon
 as possible so we can improve or fix it while behind a flag. When you upgrade
 GitLab to an earlier version, the feature flag status may change.
 

doc/administration/geo/disaster_recovery/index.md

@@ -51,7 +51,7 @@ must disable the **primary** node.
 
    NOTE: **Note:**
    (**CentOS only**) In CentOS 6 or older, there is no easy way to prevent GitLab from being
-   started if the machine reboots isn't available (see [Omnibus GitLab issue #3058](https://gitlab.com/gitlab-org/omnibus-gitlab/issues/3058)).
+   started if the machine reboots isn't available (see [Omnibus GitLab issue #3058](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/3058)).
    It may be safest to uninstall the GitLab package completely:
 
    ```shell

doc/administration/geo/disaster_recovery/planned_failover.md

@@ -126,7 +126,7 @@ will take to finish syncing. An example message would be:
 
 ## Prevent updates to the **primary** node
 
-Until a [read-only mode](https://gitlab.com/gitlab-org/gitlab-foss/issues/19739) is implemented, updates must be prevented
+Until a [read-only mode](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/19739) is implemented, updates must be prevented
 from happening manually. Note that your **secondary** node still needs read-only
 access to the **primary** node during the maintenance window.
 

doc/administration/geo/replication/configuration.md

@@ -25,7 +25,7 @@ Any change that requires access to the **Admin Area** needs to be done in the
 
 GitLab stores a number of secret values in the `/etc/gitlab/gitlab-secrets.json`
 file which *must* be the same on all nodes. Until there is
-a means of automatically replicating these between nodes (see [issue #3789](https://gitlab.com/gitlab-org/gitlab/issues/3789)),
+a means of automatically replicating these between nodes (see [issue #3789](https://gitlab.com/gitlab-org/gitlab/-/issues/3789)),
 they must be manually replicated to the **secondary** node.
 
 1. SSH into the **primary** node, and execute the command below:

doc/administration/geo/replication/database.md

@@ -43,7 +43,7 @@ The following guide assumes that:
 
 CAUTION: **Warning:**
 Geo works with streaming replication. Logical replication is not supported at this time.
-There is an [issue where support is being discussed](https://gitlab.com/gitlab-org/gitlab/issues/7420).
+There is an [issue where support is being discussed](https://gitlab.com/gitlab-org/gitlab/-/issues/7420).
 
 ### Step 1. Configure the **primary** server
 

doc/administration/geo/replication/datatypes.md

@@ -129,11 +129,11 @@ successfully, you must replicate their data using some other means.
 | Application data in PostgreSQL                                       | **Yes**                                                  | **Yes**                                                 |                                                                                                            |
 | Project repository                                                   | **Yes**                                                  | **Yes**                                                 |                                                                                                            |
 | Project wiki repository                                              | **Yes**                                                  | **Yes**                                                 |                                                                                                            |
-| Project designs repository                                           | **Yes**                                                  | [No](https://gitlab.com/gitlab-org/gitlab/issues/32467) |                                                                                                            |
+| Project designs repository                                           | **Yes**                                                  | [No](https://gitlab.com/gitlab-org/gitlab/-/issues/32467) |                                                                                                            |
 | Uploads                                                              | **Yes**                                                  | [No](https://gitlab.com/groups/gitlab-org/-/epics/1817) | Verified only on transfer, or manually (*1*)                                                               |
-| LFS objects                                                          | **Yes**                                                  | [No](https://gitlab.com/gitlab-org/gitlab/issues/8922)  | Verified only on transfer, or manually (*1*). Unavailable for new LFS objects in 11.11.x and 12.0.x (*2*). |
-| CI job artifacts (other than traces)                                 | **Yes**                                                  | [No](https://gitlab.com/gitlab-org/gitlab/issues/8923)  | Verified only manually (*1*)                                                                               |
-| Archived traces                                                      | **Yes**                                                  | [No](https://gitlab.com/gitlab-org/gitlab/issues/8923)  | Verified only on transfer, or manually (*1*)                                                               |
+| LFS objects                                                          | **Yes**                                                  | [No](https://gitlab.com/gitlab-org/gitlab/-/issues/8922)  | Verified only on transfer, or manually (*1*). Unavailable for new LFS objects in 11.11.x and 12.0.x (*2*). |
+| CI job artifacts (other than traces)                                 | **Yes**                                                  | [No](https://gitlab.com/gitlab-org/gitlab/-/issues/8923)  | Verified only manually (*1*)                                                                               |
+| Archived traces                                                      | **Yes**                                                  | [No](https://gitlab.com/gitlab-org/gitlab/-/issues/8923)  | Verified only on transfer, or manually (*1*)                                                               |
 | Personal snippets                                                    | **Yes**                                                  | **Yes**                                                 |                                                                                                            |
 | [Versioned snippets](../../../user/snippets.md#versioned-snippets) | [No](https://gitlab.com/groups/gitlab-org/-/epics/2809)  | [No](https://gitlab.com/groups/gitlab-org/-/epics/2810) |                                                                                                            |
 | Project snippets                                                     | **Yes**                                                  | **Yes**                                                 |                                                                                                            |
@@ -147,11 +147,11 @@ successfully, you must replicate their data using some other means.
 | [Conan Repository](../../../user/packages/conan_repository/index.md) | [No](https://gitlab.com/groups/gitlab-org/-/epics/2346)  | No                                                      |                                                                                                            |
 | [NuGet Repository](../../../user/packages/nuget_repository/index.md) | [No](https://gitlab.com/groups/gitlab-org/-/epics/2346)  | No                                                      |                                                                                                            |
 | [PyPi Repository](../../../user/packages/pypi_repository/index.md)   | [No](https://gitlab.com/groups/gitlab-org/-/epics/2554)  | No                                                      |                                                                                                            |
-| [External merge request diffs](../../merge_request_diffs.md)         | [No](https://gitlab.com/gitlab-org/gitlab/issues/33817)  | No                                                      |                                                                                                            |
+| [External merge request diffs](../../merge_request_diffs.md)         | [No](https://gitlab.com/gitlab-org/gitlab/-/issues/33817)  | No                                                      |                                                                                                            |
 | Content in object storage                                            | **Yes**                                                  | No                                                      |                                                                                                            |
 
 - (*1*): The integrity can be verified manually using
   [Integrity Check Rake Task](../../raketasks/check.md) on both nodes and comparing
   the output between them.
 - (*2*): GitLab versions 11.11.x and 12.0.x are affected by [a bug that prevents any new
-  LFS objects from replicating](https://gitlab.com/gitlab-org/gitlab/issues/32696).
+  LFS objects from replicating](https://gitlab.com/gitlab-org/gitlab/-/issues/32696).

doc/administration/geo/replication/geo_validation_tests.md

@@ -26,8 +26,8 @@ The following are GitLab upgrade validation tests we performed.
   configuration.
 - Outcome: Upgrade test was successful.
 - Follow up issues:
-  - [Investigate Geo end-to-end test failures](https://gitlab.com/gitlab-org/gitlab/issues/201823).
-  - [Add more logging to Geo end-to-end tests](https://gitlab.com/gitlab-org/gitlab/issues/201830).
+  - [Investigate Geo end-to-end test failures](https://gitlab.com/gitlab-org/gitlab/-/issues/201823).
+  - [Add more logging to Geo end-to-end tests](https://gitlab.com/gitlab-org/gitlab/-/issues/201830).
   - [Excess service restarts during zero-downtime upgrade](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/5047).
 
 [Upgrade Geo multi-server installation](https://gitlab.com/gitlab-org/gitlab/-/issues/199836):
@@ -43,7 +43,7 @@ The following are GitLab upgrade validation tests we performed.
   configuration.
 - Outcome: Upgrade test was successful.
 - Follow up issues:
-  - [Investigate why HTTP push spec failed on primary node](https://gitlab.com/gitlab-org/gitlab/issues/199825).
+  - [Investigate why HTTP push spec failed on primary node](https://gitlab.com/gitlab-org/gitlab/-/issues/199825).
   - [Investigate if documentation should be modified to include refresh foreign tables task](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/5041).
 
 ### October 2019
@@ -89,7 +89,7 @@ The following are PostgreSQL upgrade validation tests we performed.
 
 ### September 2019
 
-[Test and validate PostgreSQL 10.0 upgrade for Geo](https://gitlab.com/gitlab-org/gitlab/issues/12092):
+[Test and validate PostgreSQL 10.0 upgrade for Geo](https://gitlab.com/gitlab-org/gitlab/-/issues/12092):
 
 - Description: With the 12.0 release, GitLab required an upgrade to PostgreSQL 10.0. We tested
   various upgrade scenarios from GitLab 11.11.5 through to GitLab 12.1.8.

doc/administration/geo/replication/index.md

@@ -243,15 +243,15 @@ For more information on removing a Geo node, see [Removing **secondary** Geo nod
 CAUTION: **Caution:**
 This list of limitations only reflects the latest version of GitLab. If you are using an older version, extra limitations may be in place.
 
-- Pushing directly to a **secondary** node redirects (for HTTP) or proxies (for SSH) the request to the **primary** node instead of [handling it directly](https://gitlab.com/gitlab-org/gitlab/issues/1381), except when using Git over HTTP with credentials embedded within the URI. For example, `https://user:password@secondary.tld`.
+- Pushing directly to a **secondary** node redirects (for HTTP) or proxies (for SSH) the request to the **primary** node instead of [handling it directly](https://gitlab.com/gitlab-org/gitlab/-/issues/1381), except when using Git over HTTP with credentials embedded within the URI. For example, `https://user:password@secondary.tld`.
 - Cloning, pulling, or pushing repositories that exist on the **primary** node but not on the **secondary** nodes where [selective synchronization](configuration.md#selective-synchronization) does not include the project is not supported over SSH [but support is planned](https://gitlab.com/groups/gitlab-org/-/epics/2562). HTTP(S) is supported.
-- The **primary** node has to be online for OAuth login to happen. Existing sessions and Git are not affected. Support for the **secondary** node to use an OAuth provider independent from the primary is [being planned](https://gitlab.com/gitlab-org/gitlab/issues/208465).
-- The installation takes multiple manual steps that together can take about an hour depending on circumstances. We are working on improving this experience. See [Omnibus GitLab issue #2978](https://gitlab.com/gitlab-org/omnibus-gitlab/issues/2978) for details.
+- The **primary** node has to be online for OAuth login to happen. Existing sessions and Git are not affected. Support for the **secondary** node to use an OAuth provider independent from the primary is [being planned](https://gitlab.com/gitlab-org/gitlab/-/issues/208465).
+- The installation takes multiple manual steps that together can take about an hour depending on circumstances. We are working on improving this experience. See [Omnibus GitLab issue #2978](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/2978) for details.
 - Real-time updates of issues/merge requests (for example, via long polling) doesn't work on the **secondary** node.
 - [Selective synchronization](configuration.md#selective-synchronization) applies only to files and repositories. Other datasets are replicated to the **secondary** node in full, making it inappropriate for use as an access control mechanism.
 - Object pools for forked project deduplication work only on the **primary** node, and are duplicated on the **secondary** node.
 - [External merge request diffs](../../merge_request_diffs.md) will not be replicated if they are on-disk, and viewing merge requests will fail. However, external MR diffs in object storage **are** supported. The default configuration (in-database) does work.
-- GitLab Runners cannot register with a **secondary** node. Support for this is [planned for the future](https://gitlab.com/gitlab-org/gitlab/issues/3294).
+- GitLab Runners cannot register with a **secondary** node. Support for this is [planned for the future](https://gitlab.com/gitlab-org/gitlab/-/issues/3294).
 
 ### Limitations on replication/verification
 

doc/administration/geo/replication/location_aware_git_url.md

@@ -15,7 +15,7 @@ NOTE: **Note**
 You can also use a load balancer to distribute web UI or API traffic to
 [multiple Geo **secondary** nodes](../../../user/admin_area/geo_nodes.md#multiple-secondary-nodes-behind-a-load-balancer).
 Importantly, the **primary** node cannot yet be included. See the feature request
-[Support putting the **primary** behind a Geo node load balancer](https://gitlab.com/gitlab-org/gitlab/issues/10888).
+[Support putting the **primary** behind a Geo node load balancer](https://gitlab.com/gitlab-org/gitlab/-/issues/10888).
 
 ## Prerequisites
 

doc/administration/geo/replication/object_storage.md

@@ -16,7 +16,7 @@ To have:
 
 ## Enabling GitLab managed object storage replication
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/10586) in GitLab 12.4.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/10586) in GitLab 12.4.
 
 CAUTION: **Caution:**
 This is a [**beta** feature](https://about.gitlab.com/handbook/product/#beta) and is not ready yet for production use at any scale.

doc/administration/geo/replication/security_review.md

@@ -22,7 +22,7 @@ from [owasp.org](https://owasp.org/).
   etc) and repository + wiki data. In a typical configuration, this will
   happen across the public Internet, and be TLS-encrypted.
 - PostgreSQL replication is TLS-encrypted.
-- See also: [only TLSv1.2 should be supported](https://gitlab.com/gitlab-org/omnibus-gitlab/issues/2948)
+- See also: [only TLSv1.2 should be supported](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/2948)
 
 ### How can the data be classified into categories according to its sensitivity?
 
@@ -72,7 +72,7 @@ from [owasp.org](https://owasp.org/).
 
 - Nothing Geo-specific. Any user where `admin: true` is set in the database is
   considered an admin with super-user privileges.
-- See also: [more granular access control](https://gitlab.com/gitlab-org/gitlab-foss/issues/32730)
+- See also: [more granular access control](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/32730)
   (not Geo-specific).
 - Much of Geo’s integration (database replication, for instance) must be
   configured with the application, typically by system administrators.

doc/administration/geo/replication/troubleshooting.md

@@ -332,7 +332,7 @@ some of these queries will never be able to complete due to being canceled
 every time.
 
 These long-running queries are
-[planned to be removed in the future](https://gitlab.com/gitlab-org/gitlab/issues/34269),
+[planned to be removed in the future](https://gitlab.com/gitlab-org/gitlab/-/issues/34269),
 but as a workaround, we recommend enabling
 [hot_standby_feedback](https://www.postgresql.org/docs/10/hot-standby.html#HOT-STANDBY-CONFLICT).
 This increases the likelihood of bloat on the **primary** node as it prevents
@@ -353,7 +353,7 @@ sudo gitlab-ctl reconfigure
 ```
 
 To help us resolve this problem, consider commenting on
-[the issue](https://gitlab.com/gitlab-org/gitlab/issues/4489).
+[the issue](https://gitlab.com/gitlab-org/gitlab/-/issues/4489).
 
 ### Message: `LOG:  invalid CIDR mask in address`
 
@@ -405,7 +405,7 @@ long enough to accommodate a full clone of your largest repositories.
 
 If new LFS objects are never replicated to secondary Geo nodes, check the version of
 GitLab you are running. GitLab versions 11.11.x or 12.0.x are affected by
-[a bug that results in new LFS objects not being replicated to Geo secondary nodes](https://gitlab.com/gitlab-org/gitlab/issues/32696).
+[a bug that results in new LFS objects not being replicated to Geo secondary nodes](https://gitlab.com/gitlab-org/gitlab/-/issues/32696).
 
 To resolve the issue, upgrade to GitLab 12.1 or newer.
 

doc/administration/geo/replication/version_specific_updates.md

@@ -16,7 +16,7 @@ The issue is fixed in GitLab 12.9.4. Please upgrade to GitLab 12.9.4 or later.
 DANGER: **Danger:**
 Only upgrade to GitLab 12.7.5 or later. Do not upgrade to versions 12.7.0
 through 12.7.4 because there is [an initialization order
-bug](https://gitlab.com/gitlab-org/gitlab/issues/199672) that causes Geo
+bug](https://gitlab.com/gitlab-org/gitlab/-/issues/199672) that causes Geo
 **secondaries** to set the incorrect database connection pool size. [The
 fix](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/24021) was
 shipped in 12.7.5.
@@ -56,14 +56,14 @@ sudo touch /etc/gitlab/disable-postgresql-upgrade
 
 CAUTION: **Warning:**
 This version is affected by [a bug that results in new LFS objects not being replicated to
-Geo secondary nodes](https://gitlab.com/gitlab-org/gitlab/issues/32696). The issue is fixed
+Geo secondary nodes](https://gitlab.com/gitlab-org/gitlab/-/issues/32696). The issue is fixed
 in GitLab 12.1. Please upgrade to GitLab 12.1 or later.
 
 ## Updating to GitLab 11.11
 
 CAUTION: **Warning:**
 This version is affected by [a bug that results in new LFS objects not being replicated to
-Geo secondary nodes](https://gitlab.com/gitlab-org/gitlab/issues/32696). The issue is fixed
+Geo secondary nodes](https://gitlab.com/gitlab-org/gitlab/-/issues/32696). The issue is fixed
 in GitLab 12.1. Please upgrade to GitLab 12.1 or later.
 
 ## Updating to GitLab 10.8

doc/administration/git_annex.md

@@ -5,7 +5,7 @@ disqus_identifier: 'https://docs.gitlab.com/ee/workflow/git_annex.html'
 # Git annex
 
 > **Warning:** GitLab has [completely
-removed](https://gitlab.com/gitlab-org/gitlab/issues/1648) in GitLab 9.0 (2017/03/22).
+removed](https://gitlab.com/gitlab-org/gitlab/-/issues/1648) in GitLab 9.0 (2017/03/22).
 Read through the [migration guide from git-annex to Git LFS](../topics/git/lfs/migrate_from_git_annex_to_git_lfs.md).
 
 The biggest limitation of Git, compared to some older centralized version

doc/administration/git_protocol.md

@@ -4,9 +4,9 @@ description: "Set and configure Git protocol v2"
 
 # Configuring Git Protocol v2
 
-> - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/46555) in GitLab 11.4.
-> - [Temporarily disabled](https://gitlab.com/gitlab-org/gitlab-foss/issues/55769) in GitLab 11.5.8, 11.6.6, 11.7.1, and 11.8+.
-> - [Re-enabled](https://gitlab.com/gitlab-org/gitlab/issues/27828) in GitLab 12.8.
+> - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/46555) in GitLab 11.4.
+> - [Temporarily disabled](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/55769) in GitLab 11.5.8, 11.6.6, 11.7.1, and 11.8+.
+> - [Re-enabled](https://gitlab.com/gitlab-org/gitlab/-/issues/27828) in GitLab 12.8.
 
 Git protocol v2 improves the v1 wire protocol in several ways and is
 enabled by default in GitLab for HTTP requests. In order to enable SSH,

doc/administration/gitaly/index.md

@@ -56,7 +56,7 @@ be mounted on the Gitaly server.
 From GitLab v11.8 to v12.2, it is possible to use Elasticsearch in conjunction with
 a Gitaly setup that isn't utilising NFS. In order to use Elasticsearch in this
 scenario, the [new repository indexer](../../integration/elasticsearch.md#elasticsearch-repository-indexer)
-needs to be enabled in your GitLab configuration. [Since GitLab v12.3](https://gitlab.com/gitlab-org/gitlab/issues/6481),
+needs to be enabled in your GitLab configuration. [Since GitLab v12.3](https://gitlab.com/gitlab-org/gitlab/-/issues/6481),
 the new indexer becomes the default and no configuration is required.
 
 ### Network architecture
@@ -375,7 +375,7 @@ can read and write to `/mnt/gitlab/storage2`.
    NOTE: **Note:**
    `/some/dummy/path` should be set to a local folder that exists, however no
    data will be stored in this folder. This will no longer be necessary after
-   [this issue](https://gitlab.com/gitlab-org/gitaly/issues/1282) is resolved.
+   [this issue](https://gitlab.com/gitlab-org/gitaly/-/issues/1282) is resolved.
 
 1. Save the file and [restart GitLab](../restart_gitlab.md#installations-from-source).
 1. Run `sudo -u git -H bundle exec rake gitlab:gitaly:check RAILS_ENV=production` to
@@ -547,7 +547,7 @@ calling into itself:
    NOTE: **Note:**
    `/some/dummy/path` should be set to a local folder that exists, however no
    data will be stored in this folder. This will no longer be necessary after
-   [this issue](https://gitlab.com/gitlab-org/gitaly/issues/1282) is resolved.
+   [this issue](https://gitlab.com/gitlab-org/gitaly/-/issues/1282) is resolved.
 
 1. Save the file and[restart GitLab](../restart_gitlab.md#installations-from-source)
 on client node(s).
@@ -1094,7 +1094,7 @@ unset https_proxy
 
 When updating the `gitaly['listen_addr']` or `gitaly['prometheus_listen_addr']` values, Gitaly may continue to listen on the old address after a `sudo gitlab-ctl reconfigure`.
 
-When this occurs, performing a `sudo gitlab-ctl restart` will resolve the issue. This will no longer be necessary after [this issue](https://gitlab.com/gitlab-org/gitaly/issues/2521) is resolved.
+When this occurs, performing a `sudo gitlab-ctl restart` will resolve the issue. This will no longer be necessary after [this issue](https://gitlab.com/gitlab-org/gitaly/-/issues/2521) is resolved.
 
 ### Permission denied errors appearing in Gitaly logs when accessing repositories from a standalone Gitaly node
 

doc/administration/gitaly/praefect.md

@@ -89,7 +89,7 @@ to install GitLab](https://about.gitlab.com/install/).
 
 Provision a PostgreSQL server (PostgreSQL 11 or newer). Configuration through
 the Omnibus GitLab distribution is not yet supported. Follow this
-[issue](https://gitlab.com/gitlab-org/gitaly/issues/2476) for updates.
+[issue](https://gitlab.com/gitlab-org/gitaly/-/issues/2476) for updates.
 
 Prepare all your new nodes by [installing
 GitLab](https://about.gitlab.com/install/).

doc/administration/gitaly/reference.md

@@ -190,7 +190,7 @@ For historical reasons
 the Git hooks that allow GitLab to validate and react to Git pushes.
 Because Gitaly "owns" Git pushes, GitLab Shell must therefore be
 installed alongside Gitaly. This will be [simplified in the
-future](https://gitlab.com/gitlab-org/gitaly/issues/1226).
+future](https://gitlab.com/gitlab-org/gitaly/-/issues/1226).
 
 | Name | Type | Required | Description |
 | ---- | ---- | -------- | ----------- |

doc/administration/high_availability/database.md

@@ -1009,7 +1009,7 @@ the previous section:
 
 ## Enable Monitoring
 
-> [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/issues/3786) in GitLab 12.0.
+> [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/3786) in GitLab 12.0.
 
 If you enable Monitoring, it must be enabled on **all** database servers.
 

doc/administration/high_availability/gitaly.md

@@ -19,7 +19,7 @@ Continue configuration of other components by going back to the
 
 ## Enable Monitoring
 
-> [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/issues/3786) in GitLab 12.0.
+> [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/3786) in GitLab 12.0.
 
 1. Make sure to collect [`CONSUL_SERVER_NODES`](database.md#consul-information), which are the IP addresses or DNS records of the Consul server nodes, for the next step. Note they are presented as `Y.Y.Y.Y consul1.gitlab.example.com Z.Z.Z.Z`
 

doc/administration/high_availability/gitlab.md

@@ -138,7 +138,7 @@ migrations performed.
 
 ## Enable Monitoring
 
-> [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/issues/3786) in GitLab 12.0.
+> [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/3786) in GitLab 12.0.
 
 If you enable Monitoring, it must be enabled on **all** GitLab servers.
 
@@ -178,7 +178,7 @@ If you enable Monitoring, it must be enabled on **all** GitLab servers.
    running `sudo gitlab-ctl reconfigure`, it can take an extended period of time
    for Unicorn to complete reloading after receiving a `HUP`. For more
    information, see the
-   [issue](https://gitlab.com/gitlab-org/omnibus-gitlab/issues/4401).
+   [issue](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/4401).
 
 ## Troubleshooting
 

doc/administration/high_availability/monitoring_node.md

@@ -4,7 +4,7 @@ type: reference
 
 # Configuring a Monitoring node for Scaling and High Availability
 
-> [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/issues/3786) in GitLab 12.0.
+> [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/3786) in GitLab 12.0.
 
 You can configure a Prometheus node to monitor GitLab.
 

doc/administration/high_availability/nfs.md

@@ -59,7 +59,7 @@ management between systems:
 We recommend that all NFS users disable the NFS server delegation feature. This
 is to avoid a [Linux kernel bug](https://bugzilla.redhat.com/show_bug.cgi?id=1552203)
 which causes NFS clients to slow precipitously due to
-[excessive network traffic from numerous `TEST_STATEID` NFS messages](https://gitlab.com/gitlab-org/gitlab-foss/issues/52017).
+[excessive network traffic from numerous `TEST_STATEID` NFS messages](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/52017).
 
 To disable NFS server delegation, do the following:
 
@@ -164,7 +164,7 @@ Note there are several options that you should consider using:
 
 | Setting | Description |
 | ------- | ----------- |
-| `vers=4.1` |NFS v4.1 should be used instead of v4.0 because there is a Linux [NFS client bug in v4.0](https://gitlab.com/gitlab-org/gitaly/issues/1339) that can cause significant problems due to stale data.
+| `vers=4.1` |NFS v4.1 should be used instead of v4.0 because there is a Linux [NFS client bug in v4.0](https://gitlab.com/gitlab-org/gitaly/-/issues/1339) that can cause significant problems due to stale data.
 | `nofail` | Don't halt boot process waiting for this mount to become available
 | `lookupcache=positive` | Tells the NFS client to honor `positive` cache results but invalidates any `negative` cache results. Negative cache results cause problems with Git. Specifically, a `git push` can fail to register uniformly across all NFS clients. The negative cache causes the clients to 'remember' that the files did not exist previously.
 | `hard` | Instead of `soft`. [Further details](#soft-mount-option).

doc/administration/high_availability/pgbouncer.md

@@ -179,7 +179,7 @@ Refer to your preferred Load Balancer's documentation for further guidance.
 
 ## Enable Monitoring
 
-> [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/issues/3786) in GitLab 12.0.
+> [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/3786) in GitLab 12.0.
 
 If you enable Monitoring, it must be enabled on **all** PgBouncer servers.
 

doc/administration/high_availability/redis.md

@@ -746,7 +746,7 @@ gitlab_rails['redis_sentinels'] = [
 
 ## Enable Monitoring
 
-> [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/issues/3786) in GitLab 12.0.
+> [Introduced](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/3786) in GitLab 12.0.
 
 If you enable Monitoring, it must be enabled on **all** Redis servers.
 

doc/administration/housekeeping.md

 # Housekeeping
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/3041) in GitLab 8.4.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/3041) in GitLab 8.4.
 
 ## Automatic housekeeping
 

doc/administration/incoming_email.md

@@ -92,7 +92,7 @@ authenticate solely based on access to an email domain such as `*.hooli.com.`
 Alternatively, use a dedicated domain for GitLab email communications such as
 `hooli-gitlab.com`.
 
-See GitLab issue [#30366](https://gitlab.com/gitlab-org/gitlab-foss/issues/30366)
+See GitLab issue [#30366](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/30366)
 for a real-world example of this exploit.
 
 ### Omnibus package installations

doc/administration/instance_limits.md

@@ -10,7 +10,7 @@ performance, data, or could even exhaust the allocated resources for the applica
 
 ## Number of comments per issue, merge request or commit
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/22388) in GitLab 12.4.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/22388) in GitLab 12.4.
 
 There's a limit to the number of comments that can be submitted on an issue,
 merge request, or commit. When the limit is reached, system notes can still be
@@ -21,7 +21,7 @@ will fail.
 
 ## Size of comments and descriptions of issues, merge requests, and epics
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/61974) in GitLab 12.2.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/61974) in GitLab 12.2.
 
 There is a limit to the size of comments and descriptions of issues, merge requests, and epics.
 Attempting to add a body of text larger than the limit will result in an error, and the
@@ -43,7 +43,7 @@ When the number exceeds the limit the page displays an alert and links to a pagi
 
 ## Number of pipelines per Git push
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/51401) in GitLab 11.10.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/51401) in GitLab 11.10.
 
 The number of pipelines that can be created in a single push is 4.
 This is to prevent the accidental creation of pipelines when `git push --all`
@@ -53,9 +53,9 @@ Read more in the [CI documentation](../ci/yaml/README.md#processing-git-pushes).
 
 ## Retention of activity history
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/21164) in GitLab 8.12.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/21164) in GitLab 8.12.
 
-Activity history for projects and individuals' profiles was limited to one year until [GitLab 11.4](https://gitlab.com/gitlab-org/gitlab-foss/issues/52246) when it was extended to two years, and in [GitLab 12.4](https://gitlab.com/gitlab-org/gitlab/issues/33840) to three years.
+Activity history for projects and individuals' profiles was limited to one year until [GitLab 11.4](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/52246) when it was extended to two years, and in [GitLab 12.4](https://gitlab.com/gitlab-org/gitlab/-/issues/33840) to three years.
 
 ## Number of embedded metrics
 
@@ -87,7 +87,7 @@ NOTE: **Note:** Set the limit to `0` to disable it.
 
 ## Incoming emails from auto-responders
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/30327) in GitLab 12.4.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/30327) in GitLab 12.4.
 
 GitLab ignores all incoming emails sent from auto-responders by looking for the `X-Autoreply`
 header. Such emails don't create comments on issues or merge requests.
@@ -126,7 +126,7 @@ NOTE: **Note:** Set the limit to `0` to disable it.
 
 ### Number of jobs in active pipelines
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/32823) in GitLab 12.6.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/32823) in GitLab 12.6.
 
 The total number of jobs in active pipelines can be limited per project. This limit is checked
 each time a new pipeline is created. An active pipeline is any pipeline in one of the following states:
@@ -156,7 +156,7 @@ NOTE: **Note:** Set the limit to `0` to disable it.
 
 ### Number of CI/CD subscriptions to a project
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/9045) in GitLab 12.9.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/9045) in GitLab 12.9.
 
 The total number of subscriptions can be limited per project. This limit is
 checked each time a new subscription is created.
@@ -243,7 +243,7 @@ Reports that go over the 20 MB limit won't be loaded. Affected reports:
 
 ### Maximum field length
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/201826) in GitLab 12.8.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/201826) in GitLab 12.8.
 
 You can set a limit on the content of text fields indexed for Global Search.
 Setting a maximum helps to reduce the load of the indexing processes. If any
@@ -270,7 +270,7 @@ See the [documentation on Snippets settings](snippets/index.md).
 
 ### Webhooks and Project Services
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/31009) in GitLab 12.4.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/31009) in GitLab 12.4.
 
 Total number of changes (branches or tags) in a single push. If changes are more
 than the specified limit, hooks won't be executed.
@@ -282,7 +282,7 @@ More information can be found in these docs:
 
 ### Activities
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/31007) in GitLab 12.4.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/31007) in GitLab 12.4.
 
 Total number of changes (branches or tags) in a single push to determine whether
 individual push events or bulk push event will be created.

doc/administration/job_artifacts.md

@@ -164,7 +164,7 @@ _The artifacts are stored by default in
 
 CAUTION: **CAUTION:**
 JUnit test report artifact (`junit.xml.gz`) migration
-[is not supported](https://gitlab.com/gitlab-org/gitlab/issues/27698)
+[is not supported](https://gitlab.com/gitlab-org/gitlab/-/issues/27698)
 by the `gitlab:artifacts:migrate` script.
 
 **In installations from source:**
@@ -197,7 +197,7 @@ _The artifacts are stored by default in
 
 CAUTION: **CAUTION:**
 JUnit test report artifact (`junit.xml.gz`) migration
-[is not supported](https://gitlab.com/gitlab-org/gitlab/issues/27698)
+[is not supported](https://gitlab.com/gitlab-org/gitlab/-/issues/27698)
 by the `gitlab:artifacts:migrate` script.
 
 ### OpenStack compatible connection settings

doc/administration/job_logs.md

 # Job logs
 
-> [Renamed from job traces to job logs](https://gitlab.com/gitlab-org/gitlab/issues/29121) in GitLab 12.5.
+> [Renamed from job traces to job logs](https://gitlab.com/gitlab-org/gitlab/-/issues/29121) in GitLab 12.5.
 
 Job logs are sent by GitLab Runner while it's processing a job. You can see
 logs in job pages, pipelines, email notifications, etc.
@@ -67,7 +67,7 @@ job output in the UI will be empty.
 ## New incremental logging architecture
 
 > - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/18169) in GitLab 10.4.
-> - [Announced as generally available](https://gitlab.com/gitlab-org/gitlab-foss/issues/46097) in GitLab 11.0.
+> - [Announced as generally available](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/46097) in GitLab 11.0.
 
 NOTE: **Note:**
 This feature is off by default. See below for how to [enable or disable](#enabling-incremental-logging) it.

doc/administration/logs.md

@@ -218,7 +218,7 @@ October 07, 2014 11:25: Project "project133" was removed
 
 ## `application_json.log`
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/22812) in GitLab 12.7.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/22812) in GitLab 12.7.
 
 This file lives in `/var/log/gitlab/gitlab-rails/application_json.log` for
 Omnibus GitLab packages or in `/home/git/gitlab/log/application_json.log` for
@@ -608,12 +608,12 @@ This log records:
 - [Protected paths](../user/admin_area/settings/protected_paths.md) abusive requests.
 
 NOTE: **Note:**
-From [%12.1](https://gitlab.com/gitlab-org/gitlab-foss/issues/62756), user ID and username are also
+From [%12.1](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/62756), user ID and username are also
 recorded on this log, if available.
 
 ## `graphql_json.log`
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/59587) in GitLab 12.0.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/59587) in GitLab 12.0.
 
 This file lives in `/var/log/gitlab/gitlab-rails/graphql_json.log` for
 Omnibus GitLab packages or in `/home/git/gitlab/log/graphql_json.log` for

doc/administration/merge_request_diffs.md

 # Merge request diffs storage **(CORE ONLY)**
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/52568) in GitLab 11.8.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/52568) in GitLab 11.8.
 
 Merge request diffs are size-limited copies of diffs associated with merge
 requests. When viewing a merge request, diffs are sourced from these copies

doc/administration/monitoring/gitlab_self_monitoring_project/index.md

 # GitLab self monitoring project
 
-> - [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/32351) in GitLab 12.7, behind a disabled feature flag (`self_monitoring_project`).
-> - The feature flag was removed and the Self Monitoring Project was [made generally available](https://gitlab.com/gitlab-org/gitlab/issues/198511) in GitLab 12.8.
+> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/32351) in GitLab 12.7, behind a disabled feature flag (`self_monitoring_project`).
+> - The feature flag was removed and the Self Monitoring Project was [made generally available](https://gitlab.com/gitlab-org/gitlab/-/issues/198511) in GitLab 12.8.
 
 GitLab has been adding the ability for administrators to see insights into the health of
 their GitLab instance. In order to surface this experience in a native way, similar to how
@@ -69,7 +69,7 @@ You can add custom metrics in the self monitoring project by:
 
 ### Getting error message in logs: `Could not create instance administrators group. Errors: ["You don’t have permission to create groups."]`
 
-There is [a bug](https://gitlab.com/gitlab-org/gitlab/issues/208676) which causes
+There is [a bug](https://gitlab.com/gitlab-org/gitlab/-/issues/208676) which causes
 project creation to fail with the following error (which appears in the log file)
 when the first admin user is an
 [external user](../../../user/permissions.md#external-users-core-only):

doc/administration/monitoring/performance/grafana_configuration.md

@@ -57,7 +57,7 @@ repository for more information on this process.
 
 ## Integration with GitLab UI
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/61005) in GitLab 12.1.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/61005) in GitLab 12.1.
 
 If you have set up Grafana, you can enable a link to access it easily from the sidebar:
 

doc/administration/monitoring/prometheus/gitlab_metrics.md

@@ -7,7 +7,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 # GitLab Prometheus metrics
 
 >**Note:**
-Available since [Omnibus GitLab 9.3](https://gitlab.com/gitlab-org/gitlab-foss/issues/29118). For
+Available since [Omnibus GitLab 9.3](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/29118). For
 installations from source you'll have to configure it yourself.
 
 To enable the GitLab Prometheus metrics:
@@ -174,7 +174,7 @@ The following metrics are available:
 
 | Metric                            | Type      | Since                                                         | Description                            |
 |:--------------------------------- |:--------- |:------------------------------------------------------------- |:-------------------------------------- |
-| `db_load_balancing_hosts`         | Gauge     | [12.3](https://gitlab.com/gitlab-org/gitlab/issues/13630)     | Current number of load balancing hosts |
+| `db_load_balancing_hosts`         | Gauge     | [12.3](https://gitlab.com/gitlab-org/gitlab/-/issues/13630)     | Current number of load balancing hosts |
 
 ## Ruby metrics
 

doc/administration/object_storage.md

@@ -79,7 +79,7 @@ with the Fog library that GitLab uses. Symptoms include:
 
 If you're working to add more GitLab servers for [scaling or fault tolerance](reference_architectures/index.md)
 and one of your requirements is [GitLab Pages](../user/project/pages/index.md) this currently requires
-NFS. There is [work in progress](https://gitlab.com/gitlab-org/gitlab-pages/issues/196)
+NFS. There is [work in progress](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/196)
 to remove this dependency. In the future, GitLab Pages may use
 [object storage](https://gitlab.com/gitlab-org/gitlab/-/issues/208135).
 

doc/administration/operations/fast_ssh_key_lookup.md

 # Fast lookup of authorized SSH keys in the database
 
-> - [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/1631) in [GitLab Starter](https://about.gitlab.com/pricing/) 9.3.
-> - [Available in](https://gitlab.com/gitlab-org/gitlab/issues/3953) GitLab Community Edition 10.4.
+> - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/1631) in [GitLab Starter](https://about.gitlab.com/pricing/) 9.3.
+> - [Available in](https://gitlab.com/gitlab-org/gitlab/-/issues/3953) GitLab Community Edition 10.4.
 
 NOTE: **Note:** This document describes a drop-in replacement for the
 `authorized_keys` file. For normal (non-deploy key) users, consider using

doc/administration/operations/ssh_certificates.md

@@ -158,7 +158,7 @@ Users can still bypass SSH certificate authentication by manually
 uploading an SSH public key to their profile, relying on the
 `~/.ssh/authorized_keys` fallback to authenticate it. There's
 currently no feature to prevent this, [but there's an open request for
-adding it](https://gitlab.com/gitlab-org/gitlab-foss/issues/49218).
+adding it](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/49218).
 
 Such a restriction can currently be hacked in by e.g. providing a
 custom `AuthorizedKeysCommand` which checks if the discovered key-ID

doc/administration/packages/container_registry.md

@@ -884,7 +884,7 @@ mounting the docker-daemon and setting `privileged = false` in the Runner's
     volumes = ["/var/run/docker.sock:/var/run/docker.sock", "/cache"]
 ```
 
-Additional information about this: [issue 18239](https://gitlab.com/gitlab-org/gitlab-foss/issues/18239).
+Additional information about this: [issue 18239](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/18239).
 
 ### `unauthorized: authentication required` when pushing large images
 
@@ -955,7 +955,7 @@ Start with a value between `25000000` (25MB) and `50000000` (50MB).
 
 ### Supporting older Docker clients
 
-As of GitLab 11.9, we began shipping version 2.7.1 of the Docker container registry, which disables the schema1 manifest by default. If you are still using older Docker clients (1.9 or older), you may experience an error pushing images. See [omnibus-4145](https://gitlab.com/gitlab-org/omnibus-gitlab/issues/4145) for more details.
+As of GitLab 11.9, we began shipping version 2.7.1 of the Docker container registry, which disables the schema1 manifest by default. If you are still using older Docker clients (1.9 or older), you may experience an error pushing images. See [omnibus-4145](https://gitlab.com/gitlab-org/omnibus-gitlab/-/issues/4145) for more details.
 
 You can add a configuration option for backwards compatibility.
 

doc/administration/packages/dependency_proxy.md

 # GitLab Dependency Proxy administration **(PREMIUM ONLY)**
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/7934) in [GitLab Premium](https://about.gitlab.com/pricing/) 11.11.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/7934) in [GitLab Premium](https://about.gitlab.com/pricing/) 11.11.
 
 GitLab can be utilized as a dependency proxy for a variety of common package managers.
 

doc/administration/pages/index.md

@@ -6,9 +6,9 @@ description: 'Learn how to administer GitLab Pages.'
 
 > - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/80) in GitLab EE 8.3.
 > - Custom CNAMEs with TLS support were [introduced](https://gitlab.com/gitlab-org/gitlab/-/merge_requests/173) in GitLab EE 8.5.
-> - GitLab Pages [was ported](https://gitlab.com/gitlab-org/gitlab-foss/issues/14605) to Community Edition in GitLab 8.17.
+> - GitLab Pages [was ported](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/14605) to Community Edition in GitLab 8.17.
 > - Support for subgroup project's websites was
->   [introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/30548) in GitLab 11.8.
+>   [introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/30548) in GitLab 11.8.
 
 GitLab Pages allows for hosting of static sites. It must be configured by an
 administrator. Separate [user documentation](../../user/project/pages/index.md) is available.
@@ -75,7 +75,7 @@ among other things.
 Follow [these instructions](https://publicsuffix.org/submit/) to submit your
 GitLab Pages subdomain. For instance, if your domain is `example.io`, you should
 request that `example.io` is added to the Public Suffix List. GitLab.com
-added `gitlab.io` [in 2016](https://gitlab.com/gitlab-com/infrastructure/issues/230).
+added `gitlab.io` [in 2016](https://gitlab.com/gitlab-com/infrastructure/-/issues/230).
 
 ### DNS configuration
 
@@ -261,7 +261,7 @@ This setting is enabled by default.
 
 ### Let's Encrypt integration
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/28996) in GitLab 12.1.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/28996) in GitLab 12.1.
 
 [GitLab Pages' Let's Encrypt integration](../../user/project/pages/custom_domains_ssl_tls_certification/lets_encrypt_integration.md)
 allows users to add Let's Encrypt SSL certificates for GitLab Pages
@@ -278,7 +278,7 @@ To enable it, you'll need to:
 
 ### Access control
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/33422) in GitLab 11.5.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/33422) in GitLab 11.5.
 
 GitLab Pages access control can be configured per-project, and allows access to a Pages
 site to be controlled based on a user's membership to that project.
@@ -307,7 +307,7 @@ Pages access control is disabled by default. To enable it:
 
 #### Disabling public access to all Pages websites
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/32095) in GitLab 12.7.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/32095) in GitLab 12.7.
 
 You can enforce [Access Control](#access-control) for all GitLab Pages websites hosted
 on your GitLab instance. By doing so, only logged-in users will have access to them.
@@ -324,7 +324,7 @@ To do that:
 CAUTION: **Warning:**
 This action will not make all currently public web-sites private until they redeployed.
 This issue among others will be resolved by
-[changing GitLab Pages configuration mechanism](https://gitlab.com/gitlab-org/gitlab-pages/issues/282).
+[changing GitLab Pages configuration mechanism](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/282).
 
 ### Running behind a proxy
 
@@ -353,7 +353,7 @@ For installation from source this can be fixed by installing the custom Certific
 Authority (CA) in the system certificate store.
 
 For Omnibus, normally this would be fixed by [installing a custom CA in Omnibus GitLab](https://docs.gitlab.com/omnibus/settings/ssl.html#install-custom-public-certificates)
-but a [bug](https://gitlab.com/gitlab-org/gitlab/issues/25411) is currently preventing
+but a [bug](https://gitlab.com/gitlab-org/gitlab/-/issues/25411) is currently preventing
 that method from working. Use the following workaround:
 
 1. Append your GitLab server TLS/SSL certificate to `/opt/gitlab/embedded/ssl/certs/cacert.pem` where `gitlab-domain-example.com` is your GitLab application URL
@@ -435,7 +435,7 @@ The default is 100MB.
 
 ### Override maximum pages size per project or group **(PREMIUM ONLY)**
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/16610) in GitLab 12.7.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/16610) in GitLab 12.7.
 
 To override the global maximum pages size for a specific project:
 

doc/administration/pages/source.md

@@ -370,7 +370,7 @@ server_name ~^.*\.pages\.example\.io$;
 
 ## Access control
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/33422) in GitLab 11.5.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/33422) in GitLab 11.5.
 
 GitLab Pages access control can be configured per-project, and allows access to a Pages
 site to be controlled based on a user's membership to that project.

doc/administration/raketasks/project_import_export.md

 # Project import/export administration **(CORE ONLY)**
 
-> - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/3050) in GitLab 8.9.
+> - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/3050) in GitLab 8.9.
 > - From GitLab 11.3, import/export can use object storage automatically.
 
 GitLab provides Rake tasks relating to project import and export. For more information, see:

doc/administration/raketasks/uploads/migrate.md

@@ -128,7 +128,7 @@ CAUTION: **Warning:**
 **Extended downtime is required** so no new files are created in object storage during
 the migration. A configuration setting will be added soon to allow migrating
 from object storage to local files with only a brief moment of downtime for configuration changes.
-To follow progress, see the [relevant issue](https://gitlab.com/gitlab-org/gitlab/issues/30979).
+To follow progress, see the [relevant issue](https://gitlab.com/gitlab-org/gitlab/-/issues/30979).
 
 ### All-in-one Rake task
 

doc/administration/raketasks/uploads/sanitize.md

@@ -65,5 +65,5 @@ The output is written into an `exif.log` file because it will probably be long.
 If sanitization fails for an upload, an error message should be in the output of the Rake task.
 Typical reasons include that the file is missing in the storage or it's not a valid image.
 
-[Report](https://gitlab.com/gitlab-org/gitlab/issues/new) any issues and use the prefix 'EXIF' in
+[Report](https://gitlab.com/gitlab-org/gitlab/-/issues/new) any issues and use the prefix 'EXIF' in
 the issue title with the error output and (if possible) the image.

doc/administration/reference_architectures/10k_users.md

@@ -56,7 +56,7 @@ For a full list of reference architectures, see
 
 1. NFS can be used as an alternative for both repository data (replacing Gitaly) and
    object storage but this isn't typically recommended for performance reasons. Note however it is required for
-   [GitLab Pages](https://gitlab.com/gitlab-org/gitlab-pages/issues/196).
+   [GitLab Pages](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/196).
 
 1. Our architectures have been tested and validated with [HAProxy](https://www.haproxy.org/)
    as the load balancer. Although other load balancers with similar feature sets

doc/administration/reference_architectures/1k_users.md

@@ -59,7 +59,7 @@ added performance and reliability at a reduced complexity cost.
 
 1. NFS can be used as an alternative for both repository data (replacing Gitaly) and
    object storage but this isn't typically recommended for performance reasons. Note however it is required for
-   [GitLab Pages](https://gitlab.com/gitlab-org/gitlab-pages/issues/196).
+   [GitLab Pages](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/196).
 
 1. Our architectures have been tested and validated with [HAProxy](https://www.haproxy.org/)
    as the load balancer. Although other load balancers with similar feature sets

doc/administration/reference_architectures/25k_users.md

@@ -56,7 +56,7 @@ For a full list of reference architectures, see
 
 1. NFS can be used as an alternative for both repository data (replacing Gitaly) and
    object storage but this isn't typically recommended for performance reasons. Note however it is required for
-   [GitLab Pages](https://gitlab.com/gitlab-org/gitlab-pages/issues/196).
+   [GitLab Pages](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/196).
 
 1. Our architectures have been tested and validated with [HAProxy](https://www.haproxy.org/)
    as the load balancer. Although other load balancers with similar feature sets

doc/administration/reference_architectures/2k_users.md

@@ -67,7 +67,7 @@ For a full list of reference architectures, see
 
 1. NFS can be used as an alternative for both repository data (replacing Gitaly) and
    object storage but this isn't typically recommended for performance reasons. Note however it is required for
-   [GitLab Pages](https://gitlab.com/gitlab-org/gitlab-pages/issues/196).
+   [GitLab Pages](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/196).
 
 1. Our architectures have been tested and validated with [HAProxy](https://www.haproxy.org/)
    as the load balancer. Although other load balancers with similar feature sets

doc/administration/reference_architectures/3k_users.md

@@ -59,7 +59,7 @@ following the [2,000-user reference architecture](2k_users.md).
 
 1. NFS can be used as an alternative for both repository data (replacing Gitaly) and
    object storage but this isn't typically recommended for performance reasons. Note however it is required for
-   [GitLab Pages](https://gitlab.com/gitlab-org/gitlab-pages/issues/196).
+   [GitLab Pages](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/196).
 
 1. Our architectures have been tested and validated with [HAProxy](https://www.haproxy.org/)
    as the load balancer. Although other load balancers with similar feature sets

doc/administration/reference_architectures/50k_users.md

@@ -56,7 +56,7 @@ For a full list of reference architectures, see
 
 1. NFS can be used as an alternative for both repository data (replacing Gitaly) and
    object storage but this isn't typically recommended for performance reasons. Note however it is required for
-   [GitLab Pages](https://gitlab.com/gitlab-org/gitlab-pages/issues/196).
+   [GitLab Pages](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/196).
 
 1. Our architectures have been tested and validated with [HAProxy](https://www.haproxy.org/)
    as the load balancer. Although other load balancers with similar feature sets

doc/administration/reference_architectures/5k_users.md

@@ -53,7 +53,7 @@ For a full list of reference architectures, see
 
 1. NFS can be used as an alternative for both repository data (replacing Gitaly) and
    object storage but this isn't typically recommended for performance reasons. Note however it is required for
-   [GitLab Pages](https://gitlab.com/gitlab-org/gitlab-pages/issues/196).
+   [GitLab Pages](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/196).
 
 1. Our architectures have been tested and validated with [HAProxy](https://www.haproxy.org/)
    as the load balancer. Although other load balancers with similar feature sets

doc/administration/reference_architectures/index.md

@@ -198,7 +198,7 @@ column.
 
 1. NFS can be used as an alternative for object storage but this isn't typically
    recommended for performance reasons. Note however it is required for [GitLab
-   Pages](https://gitlab.com/gitlab-org/gitlab-pages/issues/196).
+   Pages](https://gitlab.com/gitlab-org/gitlab-pages/-/issues/196).
 
 1. Our architectures have been tested and validated with [HAProxy](https://www.haproxy.org/)
    as the load balancer. Although other load balancers with similar feature sets

doc/administration/repository_storage_types.md

 # Repository storage types **(CORE ONLY)**
 
-> - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/issues/28283) in GitLab 10.0.
+> - [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/28283) in GitLab 10.0.
 > - Hashed storage became the default for new installations in GitLab 12.0
 > - Hashed storage is enabled by default for new and renamed projects in GitLab 13.0.
 
@@ -108,7 +108,7 @@ The output includes the project ID and the project name:
 
 ### Hashed object pools
 
-> [Introduced](https://gitlab.com/gitlab-org/gitaly/issues/1606) in GitLab 12.1.
+> [Introduced](https://gitlab.com/gitlab-org/gitaly/-/issues/1606) in GitLab 12.1.
 
 DANGER: **Danger:**
 Do not run `git prune` or `git gc` in pool repositories! This can

doc/administration/server_hooks.md

@@ -7,7 +7,7 @@ disqus_identifier: 'https://docs.gitlab.com/ee/administration/custom_hooks.html'
 
 > **Notes:**
 >
-> - Server hooks were [introduced](https://gitlab.com/gitlab-org/gitlab/issues/196051) in GitLab 12.8 replacing Custom Hooks.
+> - Server hooks were [introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/196051) in GitLab 12.8 replacing Custom Hooks.
 > - Server hooks must be configured on the filesystem of the GitLab server. Only GitLab server administrators will be able to complete these tasks. Please explore [webhooks](../user/project/integrations/webhooks.md) and [GitLab CI/CD](../ci/README.md) as an option if you do not have filesystem access. For a user-configurable Git hook interface, see [Push Rules](../push_rules/push_rules.md), available in GitLab Starter **(STARTER)**.
 > - Server hooks won't be replicated to secondary nodes if you use [GitLab Geo](geo/replication/index.md).
 

doc/administration/snippets/index.md

@@ -8,7 +8,7 @@ Adjust the snippets' settings of your GitLab instance.
 
 ## Snippets content size limit
 
-> [Introduced](https://gitlab.com/gitlab-org/gitlab/issues/31133) in GitLab 12.6.
+> [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/31133) in GitLab 12.6.
 
 You can set a content size max limit in snippets. This limit can prevent
 abuses of the feature. The default content size limit is **52428800 Bytes** (50MB).

doc/administration/timezone.md

@@ -15,7 +15,7 @@ To see all available time zones, run `bundle exec rake time:zones:all`.
 For Omnibus installations, run `gitlab-rake time:zones:all`.
 
 NOTE: **Note:**
-Currently, this Rake task does not list timezones in TZInfo format required by Omnibus GitLab during a reconfigure: [#58672](https://gitlab.com/gitlab-org/gitlab-foss/issues/58672).
+Currently, this Rake task does not list timezones in TZInfo format required by Omnibus GitLab during a reconfigure: [#58672](https://gitlab.com/gitlab-org/gitlab-foss/-/issues/58672).
 
 ## Changing time zone in Omnibus installations
 

doc/administration/troubleshooting/debug.md

@@ -244,7 +244,7 @@ separate Rails process to debug the issue:
    For example:
 
    ```ruby
-   app.get 'https://gitlab.com/gitlab-org/gitlab-foss/issues/1?private_token=123456'
+   app.get 'https://gitlab.com/gitlab-org/gitlab-foss/-/issues/1?private_token=123456'
    ```
 
 1. In a new window, run `top`. It should show this Ruby process using 100% CPU. Write down the PID.

doc/administration/troubleshooting/gitlab_rails_cheat_sheet.md

@@ -518,7 +518,7 @@ group.project_creation_level=0
 
 ### Remove redirecting routes
 
-See <https://gitlab.com/gitlab-org/gitlab-foss/issues/41758#note_54828133>.
+See <https://gitlab.com/gitlab-org/gitlab-foss/-/issues/41758#note_54828133>.
 
 ```ruby
 path = 'foo'
@@ -576,7 +576,7 @@ This section has been moved to the [job artifacts troubleshooting documentation]
 
 ### Find reason failure (for when build trace is empty) (Introduced in 10.3.0)
 
-See <https://gitlab.com/gitlab-org/gitlab-foss/issues/41111>.
+See <https://gitlab.com/gitlab-org/gitlab-foss/-/issues/41111>.
 
 ```ruby
 build = Ci::Build.find(78420)

doc/administration/troubleshooting/kubernetes_cheat_sheet.md

@@ -85,7 +85,7 @@ and they will assist you with any issues you are having.
 ## GitLab-specific Kubernetes information
 
 - Minimal config that can be used to test a Kubernetes Helm chart can be found
-  [here](https://gitlab.com/gitlab-org/charts/gitlab/issues/620).
+  [here](https://gitlab.com/gitlab-org/charts/gitlab/-/issues/620).
 
 - Tailing logs of a separate pod. An example for a Webservice pod:
 
@@ -186,7 +186,7 @@ and they will assist you with any issues you are having.
   helm upgrade <release name> <chart path> -f gitlab.yaml
   ```
 
-  After <https://gitlab.com/gitlab-org/charts/gitlab/issues/780> is fixed, it should
+  After <https://gitlab.com/gitlab-org/charts/gitlab/-/issues/780> is fixed, it should
   be possible to use [Updating GitLab using the Helm Chart](https://docs.gitlab.com/charts/index.html#updating-gitlab-using-the-helm-chart)
   for upgrades.
 

doc/administration/troubleshooting/postgresql.md

@@ -95,15 +95,15 @@ This section is for links to information elsewhere in the GitLab documentation.
 
 References:
 
-- [Issue #1 Deadlocks with GitLab 12.1, PostgreSQL 10.7](https://gitlab.com/gitlab-org/gitlab/issues/30528)
+- [Issue #1 Deadlocks with GitLab 12.1, PostgreSQL 10.7](https://gitlab.com/gitlab-org/gitlab/-/issues/30528)
 - [Customer ticket (internal) GitLab 12.1.6](https://gitlab.zendesk.com/agent/tickets/134307) and [Google doc (internal)](https://docs.google.com/document/d/19xw2d_D1ChLiU-MO1QzWab-4-QXgsIUcN5e_04WTKy4)
-- [Issue #2 deadlocks can occur if an instance is flooded with pushes](https://gitlab.com/gitlab-org/gitlab/issues/33650). Provided for context about how GitLab code can have this sort of unanticipated effect in unusual situations.
+- [Issue #2 deadlocks can occur if an instance is flooded with pushes](https://gitlab.com/gitlab-org/gitlab/-/issues/33650). Provided for context about how GitLab code can have this sort of unanticipated effect in unusual situations.
 
 ```plaintext
 ERROR: deadlock detected
 ```
 
-Three applicable timeouts are identified in the issue [#1](https://gitlab.com/gitlab-org/gitlab/issues/30528); our recommended settings are as follows:
+Three applicable timeouts are identified in the issue [#1](https://gitlab.com/gitlab-org/gitlab/-/issues/30528); our recommended settings are as follows:
 
 ```ini
 deadlock_timeout = 5s
@@ -111,7 +111,7 @@ statement_timeout = 15s
 idle_in_transaction_session_timeout = 60s
 ```
 
-Quoting from issue [#1](https://gitlab.com/gitlab-org/gitlab/issues/30528):
+Quoting from issue [#1](https://gitlab.com/gitlab-org/gitlab/-/issues/30528):
 
 > "If a deadlock is hit, and we resolve it through aborting the transaction after a short period, then the retry mechanisms we already have will make the deadlocked piece of work try again, and it's unlikely we'll deadlock multiple times in a row."
 
@@ -124,7 +124,7 @@ PostgresSQL defaults:
 - `statement_timeout = 0` (never)
 - `idle_in_transaction_session_timeout = 0` (never)
 
-Comments in issue [#1](https://gitlab.com/gitlab-org/gitlab/issues/30528) indicate that these should both be set to at least a number of minutes for all Omnibus installations (so they don't hang indefinitely). However, 15s for statement_timeout is very short, and will only be effective if the underlying infrastructure is very performant.
+Comments in issue [#1](https://gitlab.com/gitlab-org/gitlab/-/issues/30528) indicate that these should both be set to at least a number of minutes for all Omnibus installations (so they don't hang indefinitely). However, 15s for statement_timeout is very short, and will only be effective if the underlying infrastructure is very performant.
 
 See current settings with: