Merge branch 'docs-aqualls-notes-monitor' into 'master'

Decrease use of Note boxes

See merge request gitlab-org/gitlab!44804

doc/administration/logs.md

@@ -599,7 +599,6 @@ installations from source.
 
 ## Unicorn Logs
 
-NOTE: **Note:**
 Starting with GitLab 13.0, Puma is the default web server used in GitLab
 all-in-one package based installations as well as GitLab Helm chart deployments.
 
@@ -674,10 +673,8 @@ This log records:
 - Information whenever [Rack Attack](../security/rack_attack.md) registers an abusive request.
 - Requests over the [Rate Limit](../user/admin_area/settings/rate_limits_on_raw_endpoints.md) on raw endpoints.
 - [Protected paths](../user/admin_area/settings/protected_paths.md) abusive requests.
-
-NOTE: **Note:**
-In GitLab versions [12.3](https://gitlab.com/gitlab-org/gitlab/-/issues/29239) and greater, user ID and username are also
-recorded on this log, if available.
+- In GitLab versions [12.3](https://gitlab.com/gitlab-org/gitlab/-/issues/29239) and greater,
+  user ID and username, if available.
 
 ## `graphql_json.log`
 

doc/administration/monitoring/performance/grafana_configuration.md

@@ -17,7 +17,6 @@ or Grafana supplies package repositories (Yum/Apt) for easy installation.
 See [Grafana installation documentation](https://grafana.com/docs/grafana/latest/installation/)
 for detailed steps.
 
-NOTE: **Note:**
 Before starting Grafana for the first time, set the admin user
 and password in `/etc/grafana/grafana.ini`. If you don't, the default password
 is `admin`.

doc/administration/monitoring/performance/request_profiling.md

@@ -25,7 +25,6 @@ To profile a request:
      curl --header 'X-Profile-Token: <token>' --header 'X-Profile-Mode: <mode>' "https://gitlab.example.com/group/project"
      ```
 
-     NOTE: **Note:**
      Profiled requests can take longer than usual.
 
 After the request completes, you can view the profiling output from the

doc/administration/monitoring/prometheus/index.md

@@ -32,7 +32,7 @@ dashboard tool like [Grafana](https://grafana.com).
 ## Configuring Prometheus
 
 NOTE: **Note:**
-For installations from source, you'll have to install and configure it yourself.
+For installations from source, you must install and configure it yourself.
 
 Prometheus and its exporters are on by default, starting with GitLab 9.0.
 Prometheus will run as the `gitlab-prometheus` user and listen on
@@ -179,7 +179,7 @@ The next step is to tell all the other nodes where the monitoring node is:
    take effect.
 
 NOTE: **Note:**
-Once monitoring using Service Discovery is enabled with `consul['monitoring_service_discovery'] =  true`,
+After monitoring using Service Discovery is enabled with `consul['monitoring_service_discovery'] =  true`,
 ensure that `prometheus['scrape_configs']` is not set in `/etc/gitlab/gitlab.rb`. Setting both
 `consul['monitoring_service_discovery'] = true` and `prometheus['scrape_configs']` in `/etc/gitlab/gitlab.rb`
 will result in errors.
@@ -312,7 +312,6 @@ To use an external Prometheus server:
 
 You can visit `http://localhost:9090` for the dashboard that Prometheus offers by default.
 
-NOTE: **Note:**
 If SSL has been enabled on your GitLab instance, you may not be able to access
 Prometheus on the same browser as GitLab if using the same FQDN due to [HSTS](https://en.wikipedia.org/wiki/HTTP_Strict_Transport_Security). We plan to
 [provide access via GitLab](https://gitlab.com/gitlab-org/multi-user-prometheus), but in the interim there are

doc/administration/monitoring/prometheus/node_exporter.md

@@ -10,7 +10,7 @@ The [node exporter](https://github.com/prometheus/node_exporter) enables you to
 various machine resources such as memory, disk and CPU utilization.
 
 NOTE: **Note:**
-For installations from source you'll have to install and configure it yourself.
+For installations from source you must install and configure it yourself.
 
 To enable the node exporter:
 

doc/administration/monitoring/prometheus/pgbouncer_exporter.md

@@ -12,7 +12,7 @@ The [PgBouncer exporter](https://github.com/prometheus-community/pgbouncer_expor
 you to measure various [PgBouncer](https://www.pgbouncer.org/) metrics.
 
 NOTE: **Note:**
-For installations from source you'll have to install and configure it yourself.
+For installations from source you must install and configure it yourself.
 
 To enable the PgBouncer exporter:
 

doc/administration/monitoring/prometheus/postgres_exporter.md

@@ -9,7 +9,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 The [PostgreSQL Server Exporter](https://github.com/wrouesnel/postgres_exporter) allows you to export various PostgreSQL metrics.
 
 NOTE: **Note:**
-For installations from source you will have to install and configure it yourself.
+For installations from source you must install and configure it yourself.
 
 To enable the PostgreSQL Server Exporter:
 
@@ -20,7 +20,6 @@ To enable the PostgreSQL Server Exporter:
    postgres_exporter['enable'] = true
    ```
 
-   NOTE: **Note:**
    If PostgreSQL Server Exporter is configured on a separate node, make sure that the local
    address is [listed in `trust_auth_cidr_addresses`](../../postgresql/replication_and_failover.md#network-information) or the
    exporter will not be able to connect to the database.

doc/administration/monitoring/prometheus/redis_exporter.md

@@ -11,7 +11,7 @@ various [Redis](https://redis.io) metrics. For more information on what is expor
 [read the upstream documentation](https://github.com/oliver006/redis_exporter/blob/master/README.md#whats-exported).
 
 NOTE: **Note:**
-For installations from source you'll have to install and configure it yourself.
+For installations from source you must install and configure it yourself.
 
 To enable the Redis exporter:
 

doc/api/metrics_dashboard_annotations.md

@@ -18,14 +18,11 @@ POST /environments/:id/metrics_dashboard/annotations/
 POST /clusters/:id/metrics_dashboard/annotations/
 ```
 
-NOTE: **Note:**
-The value of `dashboard_path` will be treated as a CGI-escaped path, and automatically un-escaped.
-
 Parameters:
 
 | Attribute      | Type           | Required | Description                                                                  |
 |:---------------|:---------------|:---------|:-----------------------------------------------------------------------------|
-| `dashboard_path` | string        | yes      | ID of the dashboard which needs to be annotated.   |
+| `dashboard_path` | string        | yes      | ID of the dashboard which needs to be annotated. Treated as a CGI-escaped path, and automatically un-escaped.  |
 | `starting_at` | string        | yes      | Date time string, ISO 8601 formatted, such as `2016-03-11T03:45:40Z`. Timestamp marking start point of annotation.   |
 | `ending_at` | string        | no      | Date time string, ISO 8601 formatted, such as `2016-03-11T03:45:40Z`. Timestamp marking end point of annotation. When not supplied annotation will be displayed as single event at start point.  |
 | `description` | string        | yes      | Description of the annotation.  |

doc/development/distributed_tracing.md

@@ -6,10 +6,7 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 
 # Distributed Tracing - development guidelines
 
-NOTE: **Note:**
-Distributed Tracing in GitLab is currently considered **experimental**, as it has not yet been tested at scale on GitLab.com.
-
-GitLab is instrumented for distributed tracing.
+GitLab is instrumented for distributed tracing. Distributed Tracing in GitLab is currently considered **experimental**, as it has not yet been tested at scale on GitLab.com.
 
 According to [Open Tracing](https://opentracing.io/docs/overview/what-is-tracing/):
 

doc/operations/error_tracking.md

@@ -20,10 +20,8 @@ You can sign up to the cloud hosted <https://sentry.io>, deploy your own [on-pre
 
 ### Enabling Sentry
 
-NOTE: **Note:**
-You will need at least Maintainer [permissions](../user/permissions.md) to enable the Sentry integration.
-
-GitLab provides an easy way to connect Sentry to your project:
+GitLab provides an easy way to connect Sentry to your project. You will need at
+least Maintainer [permissions](../user/permissions.md) to enable the Sentry integration.
 
 1. Sign up to Sentry.io or [deploy your own](#deploying-sentry) Sentry instance.
 1. [Create](https://docs.sentry.io/product/sentry-basics/guides/integrate-frontend/create-new-project/) a new Sentry project. For each GitLab project that you want to integrate, we recommend that you create a new Sentry project.
@@ -47,9 +45,8 @@ You may also want to enable Sentry's GitLab integration by following the steps i
 ## Error Tracking List
 
 NOTE: **Note:**
-You will need at least Reporter [permissions](../user/permissions.md) to view the Error Tracking list.
-
-You can find the Error Tracking list at **Operations > Error Tracking** in your project's sidebar.
+Users with at least Reporter [permissions](../user/permissions.md)
+can find the Error Tracking list at **Operations > Error Tracking** in your project's sidebar.
 Here, you can filter errors by title or by status (one of Ignored , Resolved, or Unresolved) and sort in descending order by Frequency, First Seen, or Last Seen. By default, the error list is ordered by Last Seen and filtered to Unresolved errors.
 
 ![Error Tracking list](img/error_tracking_list_v12_6.png)

doc/operations/incident_management/alerts.md

@@ -40,13 +40,11 @@ in GitLab to examine alerts in action.
 
 ## Enable Alerts
 
-NOTE: **Note:**
-You need at least Maintainer [permissions](../../user/permissions.md) to enable
-the Alerts feature.
-
 There are several ways to accept alerts into your GitLab project. Enabling any
-of these methods enables the Alert list. After configuring alerts, visit
-**Operations > Alerts** in your project's sidebar to view the list of alerts.
+of these methods enables the Alert list. You need at least Maintainer
+[permissions](../../user/permissions.md) to enable the Alerts feature. After
+configuring alerts, visit **Operations > Alerts** in your project's sidebar to view
+the list of alerts.
 
 ### Enable GitLab-managed Prometheus alerts
 
@@ -83,7 +81,6 @@ for requests to the alerts endpoint.
 
 You can monitor alerts using a GitLab integration with [Opsgenie](https://www.atlassian.com/software/opsgenie).
 
-NOTE: **Note:**
 If you enable the Opsgenie integration, you can't have other GitLab alert
 services, such as [Generic Alerts](generic_alerts.md) or Prometheus alerts,
 active at the same time.
@@ -168,14 +165,12 @@ about alert statuses.
 > [Introduced](https://gitlab.com/groups/gitlab-org/-/epics/3066) in GitLab 13.1.
 
 The Alert detail view allows users to update the Alert assignee.
+GitLab supports only a single assignee per alert.
 
 In large teams, where there is shared ownership of an alert, it can be
 difficult to track who is investigating and working on it. The Alert detail
 view enables you to update the Alert assignee:
 
-NOTE: **Note:**
-GitLab supports only a single assignee per alert.
-
 1. To display the list of current alerts, navigate to **Operations > Alerts**:
 
    ![Alert List View Assignee(s)](./img/alert_list_assignees_v13_1.png)

doc/operations/incident_management/incidents.md

@@ -45,13 +45,12 @@ The Incident list displays incidents sorted by incident created date.
 To see if a column is sortable, point your mouse at the header. Sortable columns
 display an arrow next to the column name.
 
+Incidents share the [Issues API](../../user/project/issues/index.md).
+
 TIP: **Tip:**
 For a live example of the incident list in action, visit this
 [demo project](https://gitlab.com/gitlab-examples/ops/incident-setup/everyone/tanuki-inc/-/incidents).
 
-NOTE: **Note:**
-Incidents share the [Issues API](../../user/project/issues/index.md).
-
 ## Configure incidents
 
 > [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/4925) in GitLab Ultimate 11.11.

doc/operations/incident_management/status_page.md

@@ -37,11 +37,10 @@ To configure a GitLab Status Page you must:
 
 ### Configure GitLab with cloud provider information
 
-To provide GitLab with the AWS account information needed to push content to your Status Page:
-
-NOTE: **Note:**
 Only AWS S3 is supported as a deploy target.
 
+To provide GitLab with the AWS account information needed to push content to your Status Page:
+
 1. Sign into GitLab as a user with Maintainer or greater [permissions](../../user/permissions.md).
 1. Navigate to **{settings}** **Settings > Operations**. Next to **Status Page**,
    click **Expand**.
@@ -74,8 +73,6 @@ the necessary CI/CD variables to deploy the Status Page to AWS S3:
 1. Scroll to **Variables**, and click **Expand**.
 1. Add the following variables from your Amazon Console:
    - `S3_BUCKET_NAME` - The name of the Amazon S3 bucket.
-
-     NOTE: **Note:**
      If no bucket with the provided name exists, the first pipeline run creates
      one and configures it for
      [static website hosting](https://docs.aws.amazon.com/AmazonS3/latest/dev/HostingWebsiteOnS3Setup.html).
@@ -128,10 +125,7 @@ To publish an incident:
 1. Create an issue in the project you enabled the GitLab Status Page settings in.
 1. A [project or group owner](../../user/permissions.md) must use the
    `/publish` [quick action](../../user/project/quick_actions.md) to publish the
-   issue to the GitLab Status Page.
-
-   NOTE: **Note:**
-   Confidential issues can't be published.
+   issue to the GitLab Status Page. Confidential issues can't be published.
 
 A background worker publishes the issue onto the Status Page using the credentials
 you provided during setup. As part of publication, GitLab will:

doc/operations/metrics/alerts.md

@@ -78,7 +78,6 @@ For GitLab to associate your alerts with an [environment](../../ci/environments/
 you must configure a `gitlab_environment_name` label on the alerts you set up in
 Prometheus. The value of this should match the name of your environment in GitLab.
 
-NOTE: **Note:**
 In GitLab versions 13.1 and greater, you can configure your manually configured
 Prometheus server to use the
 [Generic alerts integration](../incident_management/generic_alerts.md).

doc/operations/metrics/dashboards/default.md

@@ -25,7 +25,6 @@ metrics about the [deployed application](../index.md#configure-prometheus-to-gat
 
 ## Kubernetes pod health dashboard
 
-NOTE: **Note:**
 This dashboard requires Kubernetes v1.14 or higher, due to the
 [change in metric labels](https://github.com/kubernetes/kubernetes/pull/69099)
 in Kubernetes 1.14.

doc/operations/metrics/dashboards/index.md

@@ -14,7 +14,6 @@ includes a few key metrics, but you can also define your own custom dashboards.
 You may create a [new dashboard from scratch](#add-a-new-dashboard-to-your-project)
 or [duplicate a GitLab-defined Prometheus dashboard](#duplicate-a-gitlab-defined-dashboard).
 
-NOTE: **Note:**
 The metrics as defined below do not support alerts, unlike
 [custom metrics](../index.md#adding-custom-metrics).
 
@@ -86,7 +85,7 @@ with the **Add Panel** page:
 1. Click **Add panel** in the **{ellipsis_v}** **More actions** menu.
 
    NOTE: **Note:**
-   You can add panel only to custom dashboards.
+   You can only add panels to custom dashboards.
 
    ![Monitoring Dashboard actions menu with add panel item](img/actions_menu_create_add_panel_v13_3.png)
 1. In the **Define and preview panel** section, paste in the YAML you want to
@@ -100,16 +99,12 @@ with the **Add Panel** page:
 > - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/37238) in GitLab 12.7.
 > - From [GitLab 12.8 onwards](https://gitlab.com/gitlab-org/gitlab/-/issues/39505), custom metrics are also duplicated when you duplicate a dashboard.
 
-You can save a complete copy of a GitLab defined dashboard along with all custom metrics added to it.
+You can save a complete copy of a GitLab-defined dashboard along with all custom metrics added to it.
 The resulting `.yml` file can be customized and adapted to your project.
 You can decide to save the dashboard `.yml` file in the project's **default** branch or in a
-new branch.
+new branch. To duplicate a GitLab-defined dashboard:
 
 1. Click **Duplicate current dashboard** in the **{ellipsis_v}** **More actions** menu.
-
-   NOTE: **Note:**
-   You can duplicate only GitLab-defined dashboards.
-
 1. Enter the filename and other information, such as the new commit's message, and click **Duplicate**.
 1. Select a branch to add your dashboard to:
    - *If you select your **default** branch,* the new dashboard becomes immediately available.

doc/operations/metrics/dashboards/variables.md

@@ -16,7 +16,10 @@ Queries that continue to use the old format will show no data.
 
 ## Predefined variables
 
-GitLab supports a limited set of [CI variables](../../../ci/variables/README.md) in the Prometheus query. This is particularly useful for identifying a specific environment, for example with `ci_environment_slug`. The supported variables are:
+GitLab supports a limited set of [CI variables](../../../ci/variables/README.md)
+in the Prometheus query. This is particularly useful for identifying a specific
+environment, for example with `ci_environment_slug`. Variables for Prometheus queries
+must be lowercase. The supported variables are:
 
 - `environment_filter`
 - `ci_environment_slug`
@@ -27,9 +30,6 @@ GitLab supports a limited set of [CI variables](../../../ci/variables/README.md)
 - `ci_environment_name`
 - `__range`
 
-NOTE: **Note:**
-Variables for Prometheus queries must be lowercase.
-
 ### environment_filter
 
 `environment_filter` is automatically expanded to `container_name!="POD",environment="ENVIRONMENT_NAME"`

doc/operations/metrics/embed.md

@@ -17,8 +17,7 @@ metrics to others, and you want to have relevant information directly available.
 
 > [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/29691) in GitLab 12.2.
 
-NOTE: **Note:**
-Requires [Kubernetes](../../user/project/integrations/prometheus_library/kubernetes.md) metrics.
+This feature requires [Kubernetes](../../user/project/integrations/prometheus_library/kubernetes.md) metrics.
 
 Note: **Note:**
 In GitLab versions 13.3 and earlier, metrics dashboard links were in the form

doc/operations/metrics/embed_grafana.md

@@ -12,14 +12,13 @@ Grafana metrics can be embedded in [GitLab Flavored Markdown](../../user/markdow
 
 You can embed live [Grafana](https://docs.gitlab.com/omnibus/settings/grafana.html)
 charts in issues as a
-[direct linked rendered image](https://grafana.com/docs/grafana/latest/reference/share_panel/#direct-link-rendered-image).
-The **Direct link rendered image** sharing dialog within Grafana provides the link:
+[direct linked rendered image](https://grafana.com/docs/grafana/latest/reference/share_panel/#direct-link-rendered-image). Your Grafana instance must be available to the
+target user, either as a public dashboard or on the same network. The
+**Direct link rendered image** sharing dialog within Grafana provides the link:
 
 ![Grafana Direct Linked Rendered Image](img/grafana_live_embed.png)
 
-NOTE: **Note:**
-For this embed to display correctly, the Grafana instance must be available to the
-target user, either as a public dashboard or on the same network.
+For this embed to display correctly, the
 
 Copy the link and add an image tag as [inline HTML](../../user/markdown.md#inline-html)
 in your Markdown. You can tweak the query parameters to meet your needs, such as

doc/user/project/clusters/index.md

@@ -55,7 +55,6 @@ Currently, GitLab supports the following Kubernetes versions:
 - 1.14
 - 1.13 (deprecated, support ends on November 22, 2020)
 
-NOTE: **Note:**
 Some GitLab features may support versions outside the range provided here.
 
 ### Adding and removing clusters
@@ -195,7 +194,6 @@ To clear the cache:
 
 > [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/24580) in GitLab 11.8.
 
-NOTE: **Note:**
 You do not need to specify a base domain on cluster settings when using GitLab Serverless. The domain in that case
 will be specified as part of the Knative installation. See [Installing Applications](#installing-applications).
 
@@ -223,13 +221,11 @@ Auto DevOps automatically detects, builds, tests, deploys, and monitors your
 applications.
 
 To make full use of Auto DevOps (Auto Deploy, Auto Review Apps, and
-Auto Monitoring) you will need the Kubernetes project integration enabled.
+Auto Monitoring) you will need the Kubernetes project integration enabled, but
+Kubernetes clusters can be used without Auto DevOps.
 
 [Read more about Auto DevOps](../../../topics/autodevops/index.md)
 
-NOTE: **Note:**
-Kubernetes clusters can be used without Auto DevOps.
-
 ## Deploying to a Kubernetes cluster
 
 A Kubernetes cluster can be the destination for a deployment job. If
@@ -252,20 +248,13 @@ GitLab CI/CD build environment.
 | Variable | Description |
 | -------- | ----------- |
 | `KUBE_URL` | Equal to the API URL. |
-| `KUBE_TOKEN` | The Kubernetes token of the [environment service account](add_remove_clusters.md#access-controls). |
-| `KUBE_NAMESPACE` | The namespace associated with the project's deployment service account. In the format `<project_name>-<project_id>-<environment>`. For GitLab-managed clusters, a matching namespace is automatically created by GitLab in the cluster. |
+| `KUBE_TOKEN` | The Kubernetes token of the [environment service account](add_remove_clusters.md#access-controls). Prior to GitLab 11.5, `KUBE_TOKEN` was the Kubernetes token of the main service account of the cluster integration. |
+| `KUBE_NAMESPACE` | The namespace associated with the project's deployment service account. In the format `<project_name>-<project_id>-<environment>`. For GitLab-managed clusters, a matching namespace is automatically created by GitLab in the cluster. If your cluster was created before GitLab 12.2, the default `KUBE_NAMESPACE` is set to `<project_name>-<project_id>`. |
 | `KUBE_CA_PEM_FILE` | Path to a file containing PEM data. Only present if a custom CA bundle was specified. |
 | `KUBE_CA_PEM` | (**deprecated**) Raw PEM data. Only if a custom CA bundle was specified. |
 | `KUBECONFIG` | Path to a file containing `kubeconfig` for this deployment. CA bundle would be embedded if specified. This config also embeds the same token defined in `KUBE_TOKEN` so you likely will only need this variable. This variable name is also automatically picked up by `kubectl` so you won't actually need to reference it explicitly if using `kubectl`. |
 | `KUBE_INGRESS_BASE_DOMAIN` | From GitLab 11.8, this variable can be used to set a domain per cluster. See [cluster domains](#base-domain) for more information. |
 
-NOTE: **Note:**
-Prior to GitLab 11.5, `KUBE_TOKEN` was the Kubernetes token of the main
-service account of the cluster integration.
-
-NOTE: **Note:**
-If your cluster was created before GitLab 12.2, default `KUBE_NAMESPACE` will be set to `<project_name>-<project_id>`.
-
 ### Custom namespace
 
 > - [Introduced](https://gitlab.com/gitlab-org/gitlab/-/issues/27630) in GitLab 12.6.
@@ -290,7 +279,6 @@ You can customize the deployment namespace in a few ways:
   [`environment:kubernetes:namespace`](../../../ci/environments/index.md#configuring-kubernetes-deployments)
   in `.gitlab-ci.yml`.
 
-NOTE: **Note:**
 When you customize the namespace, existing environments remain linked to their current
 namespaces until you [clear the cluster cache](#clearing-the-cluster-cache).
 

doc/user/project/clusters/kubernetes_pod_logs.md

@@ -28,7 +28,6 @@ above the log file data, depending on your configuration:
 <i class="fa fa-youtube-play youtube" aria-hidden="true"></i>
 To learn more about the Log Explorer, see [APM - Log Explorer](https://www.youtube.com/watch?v=hWclZHA7Dgw).
 
-NOTE: **Note:**
 [Learn more about Kubernetes + GitLab](https://about.gitlab.com/solutions/kubernetes/).
 Everything you need to build, test, deploy, and run your application at scale.
 

doc/user/project/integrations/prometheus_library/nginx_ingress.md

@@ -8,11 +8,11 @@ info: To determine the technical writer assigned to the Stage/Group associated w
 
 > [Introduced](https://gitlab.com/gitlab-org/gitlab-foss/-/merge_requests/22133) in GitLab 11.7.
 
+GitLab has support for automatically detecting and monitoring the Kubernetes NGINX Ingress controller. This is provided by leveraging the built-in Prometheus metrics included with Kubernetes NGINX Ingress controller [version 0.16.0](https://github.com/kubernetes/ingress-nginx/blob/master/Changelog.md#0160) onward.
+
 NOTE: **Note:**
 NGINX Ingress versions prior to 0.16.0 offer an included [VTS Prometheus metrics exporter](nginx_ingress_vts.md), which exports metrics different than the built-in metrics.
 
-GitLab has support for automatically detecting and monitoring the Kubernetes NGINX Ingress controller. This is provided by leveraging the built-in Prometheus metrics included with Kubernetes NGINX Ingress controller [version 0.16.0](https://github.com/kubernetes/ingress-nginx/blob/master/Changelog.md#0160) onward.
-
 ## Requirements
 
 [Prometheus integration](../prometheus.md) must be active.