On OMAP34xx/35xx, and OMAP36xx chips with ES < 1.2, if the PER
powerdomain goes to OSWR or OFF while CORE stays at CSWR or ON, or if,
upon chip wakeup from OSWR or OFF, the CORE powerdomain goes ON before
PER, the UART3/4 FIFOs and McBSP2/3 SIDETONE memories will be
unusable.  This is erratum i582 in the OMAP36xx Silicon Errata
document.

This patch implements one of several parts of the workaround: the
addition of the wakeup dependency between the PER and WKUP
clockdomains, such that PER will wake up at the same time CORE_L3
does.

This is not a complete workaround.  For it to be complete:

1. the PER powerdomain's next power state must not be set to OSWR or
   OFF if the CORE powerdomain's next power state is set to CSWR or
   ON;

2. the UART3/4 FIFO and McBSP2/3 SIDETONE loopback tests should be run
   if the LASTPOWERSTATEENTERED bits for PER and CORE indicate that
   PER went OFF while CORE stayed on.  If loopback tests fail, then
   those devices will be unusable until PER and CORE can undergo a
   transition from ON to OSWR/OFF and back ON.
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>