• Xiao Ni's avatar
    Raid5 should update rdev->sectors after reshape · b5d27718
    Xiao Ni authored
    The raid5 md device is created by the disks which we don't use the total size. For example,
    the size of the device is 5G and it just uses 3G of the devices to create one raid5 device.
    Then change the chunksize and wait reshape to finish. After reshape finishing stop the raid
    and assemble it again. It fails.
    mdadm -CR /dev/md0 -l5 -n3 /dev/loop[0-2] --size=3G --chunk=32 --assume-clean
    mdadm /dev/md0 --grow --chunk=64
    wait reshape to finish
    mdadm -S /dev/md0
    mdadm -As
    The error messages:
    [197519.814302] md: loop1 does not have a valid v1.2 superblock, not importing!
    [197519.821686] md: md_import_device returned -22
    
    After reshape the data offset is changed. It selects backwards direction in this condition.
    In function super_1_load it compares the available space of the underlying device with
    sb->data_size. The new data offset gets bigger after reshape. So super_1_load returns -EINVAL.
    rdev->sectors is updated in md_finish_reshape. Then sb->data_size is set in super_1_sync based
    on rdev->sectors. So add md_finish_reshape in end_reshape.
    Signed-off-by: default avatarXiao Ni <xni@redhat.com>
    Acked-by: default avatarGuoqing Jiang <gqjiang@suse.com>
    Cc: stable@vger.kernel.org
    Signed-off-by: default avatarShaohua Li <shli@fb.com>
    b5d27718
raid5.c 238 KB