When build perf with ASan or UBSan, if libasan or libubsan can not find,
the feature-glibc is 0 and there exists the following error log which is
wrong, because we can find gnu/libc-version.h in /usr/include,
glibc-devel is also installed.

  [yangtiezhu@linux perf]$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address'
    BUILD:   Doing 'make -j4' parallel build
    HOSTCC   fixdep.o
    HOSTLD   fixdep-in.o
    LINK     fixdep
  <stdin>:1:0: warning: -fsanitize=address and -fsanitize=kernel-address are not supported for this target
  <stdin>:1:0: warning: -fsanitize=address not supported for this target

  Auto-detecting system features:
  ...                         dwarf: [ OFF ]
  ...            dwarf_getlocations: [ OFF ]
  ...                         glibc: [ OFF ]
  ...                          gtk2: [ OFF ]
  ...                      libaudit: [ OFF ]
  ...                        libbfd: [ OFF ]
  ...                        libcap: [ OFF ]
  ...                        libelf: [ OFF ]
  ...                       libnuma: [ OFF ]
  ...        numa_num_possible_cpus: [ OFF ]
  ...                       libperl: [ OFF ]
  ...                     libpython: [ OFF ]
  ...                     libcrypto: [ OFF ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ OFF ]
  ...                          zlib: [ OFF ]
  ...                          lzma: [ OFF ]
  ...                     get_cpuid: [ OFF ]
  ...                           bpf: [ OFF ]
  ...                        libaio: [ OFF ]
  ...                       libzstd: [ OFF ]
  ...        disassembler-four-args: [ OFF ]

  Makefile.config:393: *** No gnu/libc-version.h found, please install glibc-dev[el].  Stop.
  Makefile.perf:224: recipe for target 'sub-make' failed
  make[1]: *** [sub-make] Error 2
  Makefile:69: recipe for target 'all' failed
  make: *** [all] Error 2
  [yangtiezhu@linux perf]$ ls /usr/include/gnu/libc-version.h
  /usr/include/gnu/libc-version.h

After install libasan and libubsan, the feature-glibc is 1 and the build
process is success, so the cause is related with libasan or libubsan, we
should check them and print an error log to reflect the reality.

Committer testing:

  $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
  $ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j12' parallel build
    HOSTCC   /tmp/build/perf/fixdep.o
    HOSTLD   /tmp/build/perf/fixdep-in.o
    LINK     /tmp/build/perf/fixdep

  Auto-detecting system features:
  ...                         dwarf: [ OFF ]
  ...            dwarf_getlocations: [ OFF ]
  ...                         glibc: [ OFF ]
  ...                          gtk2: [ OFF ]
  ...                        libbfd: [ OFF ]
  ...                        libcap: [ OFF ]
  ...                        libelf: [ OFF ]
  ...                       libnuma: [ OFF ]
  ...        numa_num_possible_cpus: [ OFF ]
  ...                       libperl: [ OFF ]
  ...                     libpython: [ OFF ]
  ...                     libcrypto: [ OFF ]
  ...                     libunwind: [ OFF ]
  ...            libdw-dwarf-unwind: [ OFF ]
  ...                          zlib: [ OFF ]
  ...                          lzma: [ OFF ]
  ...                     get_cpuid: [ OFF ]
  ...                           bpf: [ OFF ]
  ...                        libaio: [ OFF ]
  ...                       libzstd: [ OFF ]
  ...        disassembler-four-args: [ OFF ]

  Makefile.config:401: *** No libasan found, please install libasan.  Stop.
  make[1]: *** [Makefile.perf:231: sub-make] Error 2
  make: *** [Makefile:70: all] Error 2
  make: Leaving directory '/home/acme/git/perf/tools/perf'
  $
  $
  $ sudo dnf install libasan
  <SNIP>
  Installed:
    libasan-9.3.1-2.fc31.x86_64
  $
  $
  $ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin
  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j12' parallel build

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...            dwarf_getlocations: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libcap: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...        numa_num_possible_cpus: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                     libcrypto: [ on  ]
  ...                     libunwind: [ on  ]
  ...            libdw-dwarf-unwind: [ on  ]
  ...                          zlib: [ on  ]
  ...                          lzma: [ on  ]
  ...                     get_cpuid: [ on  ]
  ...                           bpf: [ on  ]
  ...                        libaio: [ on  ]
  ...                       libzstd: [ on  ]
  ...        disassembler-four-args: [ on  ]
   <SNIP>
    CC       /tmp/build/perf/util/pmu-flex.o
    FLEX     /tmp/build/perf/util/expr-flex.c
    CC       /tmp/build/perf/util/expr-bison.o
    CC       /tmp/build/perf/util/expr.o
    CC       /tmp/build/perf/util/expr-flex.o
    CC       /tmp/build/perf/util/parse-events-flex.o
    CC       /tmp/build/perf/util/parse-events.o
    LD       /tmp/build/perf/util/intel-pt-decoder/perf-in.o
    LD       /tmp/build/perf/util/perf-in.o
    LD       /tmp/build/perf/perf-in.o
    LINK     /tmp/build/perf/perf
  <SNIP>
    INSTALL  python-scripts
    INSTALL  perf_completion-script
    INSTALL  perf-tip
  make: Leaving directory '/home/acme/git/perf/tools/perf'
  $ ldd ~/bin/perf | grep asan
  	libasan.so.5 => /lib64/libasan.so.5 (0x00007f0904164000)
  $

And if we rebuild without -fsanitize-address:

  $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf
  $ make O=/tmp/build/perf -C tools/perf/ install-bin
  make: Entering directory '/home/acme/git/perf/tools/perf'
    BUILD:   Doing 'make -j12' parallel build
    HOSTCC   /tmp/build/perf/fixdep.o
    HOSTLD   /tmp/build/perf/fixdep-in.o
    LINK     /tmp/build/perf/fixdep

  Auto-detecting system features:
  ...                         dwarf: [ on  ]
  ...            dwarf_getlocations: [ on  ]
  ...                         glibc: [ on  ]
  ...                          gtk2: [ on  ]
  ...                        libbfd: [ on  ]
  ...                        libcap: [ on  ]
  ...                        libelf: [ on  ]
  ...                       libnuma: [ on  ]
  ...        numa_num_possible_cpus: [ on  ]
  ...                       libperl: [ on  ]
  ...                     libpython: [ on  ]
  ...                     libcrypto: [ on  ]
  ...                     libunwind: [ on  ]
  ...            libdw-dwarf-unwind: [ on  ]
  ...                          zlib: [ on  ]
  ...                          lzma: [ on  ]
  ...                     get_cpuid: [ on  ]
  ...                           bpf: [ on  ]
  ...                        libaio: [ on  ]
  ...                       libzstd: [ on  ]
  ...        disassembler-four-args: [ on  ]

    GEN      /tmp/build/perf/common-cmds.h
    CC       /tmp/build/perf/exec-cmd.o
  <SNIP>
    INSTALL  perf_completion-script
    INSTALL  perf-tip
  make: Leaving directory '/home/acme/git/perf/tools/perf'
  $ ldd ~/bin/perf | grep asan
  $
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: tiezhu yang <yangtiezhu@loongson.cn>
Cc: xuefeng li <lixuefeng@loongson.cn>
Link: http://lore.kernel.org/lkml/1592445961-28044-1-git-send-email-yangtiezhu@loongson.cnSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>