-
Jagan Teki authored
Loop N1 instruction delay for burst mode devices are computed based on horizontal sync and porch timing values. The current driver is using u16 type for computing this hsync_porch value, which would failed to fit within the u16 type for large sync and porch timings devices. This would result in hsync_porch overflow and eventually computed wrong instruction delay value. Example, timings, where it produces the overflow { .hdisplay = 1080, .hsync_start = 1080 + 408, .hsync_end = 1080 + 408 + 4, .htotal = 1080 + 408 + 4 + 38, } It reproduces the desired delay value 65487 but the correct working value should be 7. So, Fix it by computing hsync_porch value separately with u32 type. Fixes: 1c1a7aa3 ("drm/sun4i: dsi: Add burst support") Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190512184128.13720-2-jagan@amarulasolutions.com
51a0d1a9