The i.MX device tree update for 4.8:
 - Add two i.MX23/STMP3780 based MP3 player device support, Creative
   X-Fi3 and SanDisk Sansa Fuze+
 - Add the support of Auvidea H100 device which is a SolidRun MicroSOM
   baseboard
 - Restructure i.MX7Dual DTS files to support i.MX7Solo and add Toradex
   Colibri iMX7S/iMX7D boards
 - Device additions and enabling for various boards: mmc device for
   utilite-pro, IRQ controller and CAN support for TS-4800, display and
   touchscreen support for imx7d-sdb, SAI audio and LCD support for
   imx6ul-14x14-evk, gpio power off support for imx6q-bx50v3, etc.
 - Update the boards from Freescale/NXP to use WDOG_B pin for reset
 - PCI reset polarity correction for imx6qdl-sabresd and imx6q-tbs2910
 - Update i.MX board dts files to use generic uart-has-rtscts DT
   property instead of vendor specific one
 - DTC warning fixing for a few boards which are mostly mismatch between
   unit-address and reg property
 - Remove SION setting from all mux modes on i.MX25

* tag 'imx-dt-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits)
  ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D support
  ARM: dts: imx7d: move input header into base device tree
  ARM: dts: imx7d: recreate imx7d.dtsi with i.MX 7Dual specifics
  ARM: dts: imx7d: use imx7s.dtsi as base device tree
  ARM: dts: imx7d-sdb: Add support for touchscreen
  ARM: dts: imx7d-sdb: Add display support
  ARM: dts: imx7d: Add SPI support
  ARM: dts: imx6q-bx50v3: Add gpio power off support
  ARM: dts: imx6ul-pico-hobbit: Fix Ethernet PHY reset GPIO
  ARM: dts: imx6q-tbs2910: fix pcie reset polarity
  ARM: dts: imx6sx-sdb: Use WDOG_B pin reset
  ARM: dts: imx6ul-evk: Use WDOG_B pin reset
  ARM: dts: imx7d-sdb: Use WDOG_B pin reset
  ARM: dts: imx6qdl-sabresd: Use WDOG_B pin reset
  ARM: dts: utilite-pro: add mmc card slot support
  ARM: dts: imx6q-cm-fx6: fix the operation points
  ARM: dts: imx6qdl.dtsi: add "arm,shared-override" for pl310
  ARM: imx25-pinfunc: remove SION from all modes
  ARM: imx25-pinfunc: document SION being important for MX25_PAD_SD1_CMD__SD1_CMD
  ARM: dts: ls1021a: Add dis_rxdet_inp3_quirk property to USB3 node
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>