Add a modeline for the Philips 200W display.  aty128fb does not do DDC, it
picks 1920x1440 or similar.  It works ok with nvidiafb because it can ask
for DDC data.

mode "1680x1050-60"
    # D: 146.028 MHz, H: 65.191 kHz, V: 59.863 Hz
    geometry 1680 1050 1680 1050 16
    timings 6848 280 104 30 3 176 6
    hsync high
    vsync high
    rgba 5/11,6/5,5/0,0/0
endmode

 hwinfo --monitor
20: None 00.0: 10000 Monitor
  [Created at monitor.206]
  Unique ID: rdCR.pzUFTofo1S4
  Parent ID: 002j.bJRsY88eNSC
  Hardware Class: monitor
  Model: "PHILIPS Philips 200W"
  Vendor: PHL "PHILIPS"
  Device: eisa 0x0832 "Philips 200W"
  Serial ID: "VN  016596"
  Resolution: 720x400@70Hz
  Resolution: 640x480@60Hz
  Resolution: 640x480@67Hz
  Resolution: 640x480@72Hz
  Resolution: 640x480@75Hz
  Resolution: 800x600@56Hz
  Resolution: 800x600@60Hz
  Resolution: 800x600@72Hz
  Resolution: 800x600@75Hz
  Resolution: 832x624@75Hz
  Resolution: 1024x768@60Hz
  Resolution: 1024x768@70Hz
  Resolution: 1024x768@75Hz
  Resolution: 1280x1024@75Hz
  Resolution: 1152x864@70Hz
  Resolution: 1152x864@75Hz
  Resolution: 1280x960@60Hz
  Resolution: 1280x1024@60Hz
  Resolution: 1680x1050@60Hz
  Size: 433x271 mm
  Driver Info #0:
    Max. Resolution: 1680x1050
    Vert. Sync Range: 56-85 Hz
    Hor. Sync Range: 30-93 kHz
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #5 (VGA compatible controller)
Signed-off-by: Olaf Hering <olh@suse.de>
Acked-by: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>