• Evgeni Dobrev's avatar
    Kirkwood: add support for Seagate BlackArmor NAS220 · dd7d2be1
    Evgeni Dobrev authored
    This patch adds support for Seagate BlackArmor NAS220.
    
    The Seagate BlackArmor NAS 220 is a NAS system based on Marvell 88f6192. It has
    32MB NAND and 128MB DRAM. It has two SATA slots, one Gigabit Ethernet port, two
    USB 2.0 ports, two buttons and three LEDs. There is a serial port available on
    the CN5 connector on the board (1 - TX, 4 - RX, 6 - GND).
    
    The only functionality still not implemented is the bi-color led on the front
    panel (status). Pins mpp22 and mpp23 control this led. Setting mpp22 to high and
    mpp23 to low results in orange color. Setting mpp22 to low and mpp23 to high
    results in blue color.
    
    The third led is wired to show the SATA activity on the two drives.
    Signed-off-by: default avatarEvgeni Dobrev <evgeni@studio-punkt.com>
    Acked-by: default avatarSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
    Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
    dd7d2be1
Makefile 15.2 KB