Commit 009d196b authored by Peter Ujfalusi's avatar Peter Ujfalusi Committed by Mark Brown

ASoC: twl6040: Simplify code in out_drv_event for pending work check

Instead of checking, if the work is pending, it is safer to cancel
the pending work, or wait till the scheduled work finishes.
This way we can avoid modifying the variables used by the work
function.
Since we know that no work is pending, we can remove the two additional
checks in POST_PMU, and PRE_PMD for non pending works.
Signed-off-by: default avatarPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
parent 6fbb32d1
......@@ -565,12 +565,26 @@ static int out_drv_event(struct snd_soc_dapm_widget *w,
switch (w->shift) {
case 2: /* Headset output driver */
out = &priv->headset;
work = &out->work;
/*
* Make sure, that we do not mess up variables for already
* executing work.
*/
cancel_delayed_work_sync(work);
out->left_step = priv->hs_left_step;
out->right_step = priv->hs_right_step;
out->step_delay = 5; /* 5 ms between volume ramp steps */
break;
case 4: /* Handsfree output driver */
out = &priv->handsfree;
work = &out->work;
/*
* Make sure, that we do not mess up variables for already
* executing work.
*/
cancel_delayed_work_sync(work);
out->left_step = priv->hf_left_step;
out->right_step = priv->hf_right_step;
out->step_delay = 5; /* 5 ms between volume ramp steps */
......@@ -583,39 +597,31 @@ static int out_drv_event(struct snd_soc_dapm_widget *w,
return -1;
}
work = &out->work;
switch (event) {
case SND_SOC_DAPM_POST_PMU:
if (out->active)
break;
/* don't use volume ramp for power-up */
out->ramp = TWL6040_RAMP_UP;
out->left_step = out->left_vol;
out->right_step = out->right_vol;
if (!delayed_work_pending(work)) {
out->ramp = TWL6040_RAMP_UP;
queue_delayed_work(priv->workqueue, work,
msecs_to_jiffies(1));
}
queue_delayed_work(priv->workqueue, work, msecs_to_jiffies(1));
break;
case SND_SOC_DAPM_PRE_PMD:
if (!out->active)
break;
if (!delayed_work_pending(work)) {
/* use volume ramp for power-down */
out->ramp = TWL6040_RAMP_DOWN;
INIT_COMPLETION(out->ramp_done);
/* use volume ramp for power-down */
out->ramp = TWL6040_RAMP_DOWN;
INIT_COMPLETION(out->ramp_done);
queue_delayed_work(priv->workqueue, work,
msecs_to_jiffies(1));
queue_delayed_work(priv->workqueue, work, msecs_to_jiffies(1));
wait_for_completion_timeout(&out->ramp_done,
msecs_to_jiffies(2000));
}
wait_for_completion_timeout(&out->ramp_done,
msecs_to_jiffies(2000));
break;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment