Commit 00d94979 authored by Russell King's avatar Russell King

FB: sa11x0: convert shannon display enable accesses to use GPIO subsystem

Rather than accessing GPSR and GPCR directly, use the GPIO subsystem
instead.
Acked-by: default avatarFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 9bb13eed
......@@ -21,7 +21,7 @@
#define SHANNON_GPIO_U3_RTS GPIO_GPIO (19) /* ?? */
#define SHANNON_GPIO_U3_CTS GPIO_GPIO (20) /* ?? */
#define SHANNON_GPIO_SENSE_12V GPIO_GPIO (21) /* Input, 12v flash unprotect detected */
#define SHANNON_GPIO_DISP_EN GPIO_GPIO (22) /* out */
#define SHANNON_GPIO_DISP_EN 22 /* out */
/* XXX GPIO 23 unaccounted for */
#define SHANNON_GPIO_EJECT_0 GPIO_GPIO (24) /* in */
#define SHANNON_IRQ_GPIO_EJECT_0 IRQ_GPIO24
......
......@@ -173,6 +173,7 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/cpufreq.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
......@@ -796,10 +797,8 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
DBAR2 = fbi->dbar2;
LCCR0 |= LCCR0_LEN;
if (machine_is_shannon()) {
GPDR |= SHANNON_GPIO_DISP_EN;
GPSR = SHANNON_GPIO_DISP_EN;
}
if (machine_is_shannon())
gpio_set_value(SHANNON_GPIO_DISP_EN, 1);
dev_dbg(fbi->dev, "DBAR1 = 0x%08lx\n", DBAR1);
dev_dbg(fbi->dev, "DBAR2 = 0x%08lx\n", DBAR2);
......@@ -815,9 +814,8 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
dev_dbg(fbi->dev, "Disabling LCD controller\n");
if (machine_is_shannon()) {
GPCR = SHANNON_GPIO_DISP_EN;
}
if (machine_is_shannon())
gpio_set_value(SHANNON_GPIO_DISP_EN, 0);
set_current_state(TASK_UNINTERRUPTIBLE);
add_wait_queue(&fbi->ctrlr_wait, &wait);
......@@ -1230,6 +1228,13 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
goto failed;
}
if (machine_is_shannon()) {
ret = gpio_request_one(SHANNON_GPIO_DISP_EN,
GPIOF_OUT_INIT_LOW, "display enable");
if (ret)
goto err_free_irq;
}
/*
* This makes sure that our colour bitfield
* descriptors are correctly initialised.
......@@ -1240,7 +1245,7 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
ret = register_framebuffer(&fbi->fb);
if (ret < 0)
goto err_free_irq;
goto err_reg_fb;
#ifdef CONFIG_CPU_FREQ
fbi->freq_transition.notifier_call = sa1100fb_freq_transition;
......@@ -1252,6 +1257,9 @@ static int __devinit sa1100fb_probe(struct platform_device *pdev)
/* This driver cannot be unloaded at the moment */
return 0;
err_reg_fb:
if (machine_is_shannon())
gpio_free(SHANNON_GPIO_DISP_EN);
err_free_irq:
free_irq(irq, fbi);
failed:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment