Commit 0145e5c9 authored by Jeff Garzik's avatar Jeff Garzik

Merge kernel.bkbits.net:net-drivers-2.5

into redhat.com:/garz/repo/net-drivers-2.5
parents b47285fb 49a85c6a
......@@ -281,6 +281,14 @@ tcp_rfc1337 - BOOLEAN
assassination.
Default: 0
tcp_low_latency - BOOLEAN
If set, the TCP stack makes decisions that prefer lower
latency as opposed to higher throughput. By default, this
option is not set meaning that higher throughput is preferred.
An example of an application where this default should be
changed would be a Beowulf compute cluster.
Default: 0
ip_local_port_range - 2 INTEGERS
Defines the local port range that is used by TCP and UDP to
choose the local port. The first number is the first, the
......
......@@ -748,7 +748,8 @@ Module parameters
Module snd-rme32
----------------
Module for RME Digi32, Digi32/8 and Digi32 PRO soundcards.
Module for RME Digi32, Digi32 Pro and Digi32/8 (Sek'd Prodif32,
Prodif96 and Prodif Gold) soundcards.
Module supports up to 8 cards.
......
......@@ -82,9 +82,15 @@ as you like and set the format S16LE. For example, for playback with
and use the interleaved 4 channel data.
There is a control switch, "Line-In As Bass". As you can imagine from
its name, the line-in jack is used for the bass (5th and 6th channels)
output.
There are some control switchs affecting to the speaker connections:
"Line-In As Rear" - As mentioned above, the line-in jack is used
for the rear (3th and 4th channels) output.
"Line-In As Bass" - The line-in jack is used for the bass (5th
and 6th channels) output.
"Mic As Center/LFE" - The mic jack is used for the bass output.
If this switch is on, you cannot use a microphone as a capture
source, of course.
Digital I/O
......@@ -134,8 +140,7 @@ Additionally there are relevant control switches:
(see the next section).
"IEC958 In Select" - Select SPDIF input, the internal CD-in (false)
and the external input (true). This switch appears only on
the chip models 039 or later.
and the external input (true).
"IEC958 Loop" - SPDIF input data is loop back into SPDIF
output (aka bypass)
......
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook V4.1//EN">
<book>
<?dbhtml filename="index.html">
<!-- ****************************************************** -->
<!-- Header -->
<!-- ****************************************************** -->
<bookinfo>
<title>The ALSA Driver API</title>
<legalnotice>
<para>
This document is free; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
</para>
<para>
This document is distributed in the hope that it will be useful,
but <emphasis>WITHOUT ANY WARRANTY</emphasis>; without even the
implied warranty of <emphasis>MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE</emphasis>. See the GNU General Public License
for more details.
</para>
<para>
You should have received a copy of the GNU General Public
License along with this program; if not, write to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
MA 02111-1307 USA
</para>
</legalnotice>
</bookinfo>
<chapter><title>Management of Cards and Devices</title>
<sect1><title>Card Managment</title>
!Esound/core/init.c
</sect1>
<sect1><title>Device Components</title>
!Esound/core/device.c
</sect1>
<sect1><title>KMOD and Device File Entries</title>
!Esound/core/sound.c
</sect1>
<sect1><title>Memory Management Helpers</title>
!Esound/core/memory.c
!Iinclude/sound/sndmagic.h
</sect1>
</chapter>
<chapter><title>PCM API</title>
<sect1><title>PCM Core</title>
!Esound/core/pcm.c
!Esound/core/pcm_lib.c
!Esound/core/pcm_native.c
</sect1>
<sect1><title>PCM Format Helpers</title>
!Esound/core/pcm_misc.c
</sect1>
<sect1><title>PCM Memory Managment</title>
!Esound/core/pcm_memory.c
</sect1>
<sect1><title>SG-Buffer Helpers</title>
!Esound/core/pcm_sgbuf.c
</sect1>
</chapter>
<chapter><title>Control/Mixer API</title>
<sect1><title>General Control Interface</title>
!Esound/core/control.c
</sect1>
<sect1><title>AC97 Codec API</title>
!Esound/pci/ac97/ac97_codec.c
</sect1>
</chapter>
<chapter><title>MIDI API</title>
<sect1><title>Raw MIDI API</title>
!Esound/core/rawmidi.c
</sect1>
<sect1><title>MPU401-UART API</title>
!Esound/drivers/mpu401/mpu401_uart.c
</sect1>
</chapter>
<chapter><title>Proc Info API</title>
<sect1><title>Proc Info Interface</title>
!Esound/core/info.c
</sect1>
</chapter>
<chapter><title>Miscellaneous Functions</title>
<sect1><title>Hardware-Dependent Devices API</title>
!Esound/core/hwdep.c
</sect1>
<sect1><title>ISA DMA Helpers</title>
!Esound/core/isadma.c
</sect1>
<sect1><title>Other Helper Macros</title>
!Iinclude/sound/core.h
</sect1>
</chapter>
</book>
This diff is collapsed.
This diff is collapsed.
......@@ -17,7 +17,7 @@ GZFLAGS :=-9
CFLAGS :=$(CFLAGS:-O2=-Os)
ifeq ($(CONFIG_FRAME_POINTER),y)
CFLAGS :=$(CFLAGS:-fomit-frame-pointer=-mapcs -mno-sched-prolog)
CFLAGS +=-fno-omit-frame-pointer -mapcs -mno-sched-prolog
endif
ifeq ($(CONFIG_DEBUG_INFO),y)
......@@ -36,7 +36,7 @@ apcs-$(CONFIG_CPU_26) :=-mapcs-26 -mcpu=arm3
# series of macros.
arch-$(CONFIG_CPU_32v3) :=-D__LINUX_ARM_ARCH__=3 -march=armv3
arch-$(CONFIG_CPU_32v4) :=-D__LINUX_ARM_ARCH__=4 -march=armv4
arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 -march=armv5
arch-$(CONFIG_CPU_32v5) :=-D__LINUX_ARM_ARCH__=5 -march=armv5te
arch-$(CONFIG_CPU_XSCALE) :=-D__LINUX_ARM_ARCH__=5 -march=armv4 -Wa,-mxscale #-march=armv5te
# This selects how we optimise for the processor.
......@@ -124,10 +124,10 @@ FASTFPE_OBJ :=$(FASTFPE)/
endif
# If we have a machine-specific directory, then include it in the build.
core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
ifneq ($(MACHINE),)
core-y += arch/arm/mach-$(MACHINE)/
endif
core-y += arch/arm/kernel/ arch/arm/mm/
core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/
core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ)
......
......@@ -664,5 +664,5 @@ memdump: mov r12, r0
reloc_end:
.align
.section ".stack", "aw"
.section ".stack", "w"
user_stack: .space 4096
#
# Makefile for the linux kernel.
#
export-objs := sa1111.o sa1111-pcibuf.o sa1111-pcipool.o
obj-$(CONFIG_SA1111) += sa1111.o sa1111-pcibuf.o sa1111-pcipool.o
obj-$(CONFIG_PCI_HOST_PLX90X0) += plx90x0.o
obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
This diff is collapsed.
This diff is collapsed.
......@@ -26,8 +26,6 @@ obj-$(CONFIG_MODULES) += armksyms.o module.o
obj-$(CONFIG_ARTHUR) += arthur.o
obj-$(CONFIG_ISA_DMA) += dma-isa.o
obj-$(CONFIG_PCI) += bios32.o
obj-$(CONFIG_PCI_HOST_PLX90X0) += plx90x0.o
obj-$(CONFIG_PCI_HOST_VIA82C505) += via82c505.o
ifneq ($(MACHINE),ebsa110)
obj-y += io.o
......
......@@ -881,6 +881,90 @@ static void ecard_proc_init(void)
get_ecard_dev_info);
}
#define ec_set_resource(ec,nr,st,sz,flg) \
do { \
(ec)->resource[nr].name = ec->dev.name; \
(ec)->resource[nr].start = st; \
(ec)->resource[nr].end = (st) + (sz) - 1; \
(ec)->resource[nr].flags = flg; \
} while (0)
static void __init ecard_init_resources(struct expansion_card *ec)
{
unsigned long base = PODSLOT_IOC4_BASE;
unsigned int slot = ec->slot_no;
int i;
if (slot < 4) {
ec_set_resource(ec, ECARD_RES_MEMC,
PODSLOT_MEMC_BASE + (slot << 14),
PODSLOT_MEMC_SIZE, IORESOURCE_MEM);
base = PODSLOT_IOC0_BASE;
}
#ifdef CONFIG_ARCH_RPC
if (slot < 8) {
ec_set_resource(ec, ECARD_RES_EASI,
PODSLOT_EASI_BASE + (slot << 24),
PODSLOT_EASI_SIZE, IORESOURCE_MEM);
}
if (slot == 8) {
ec_set_resource(ec, ECARD_RES_MEMC, NETSLOT_BASE,
NETSLOT_SIZE, IORESOURCE_MEM);
} else
#endif
for (i = 0; i < ECARD_RES_IOCSYNC - ECARD_RES_IOCSLOW; i++) {
ec_set_resource(ec, i + ECARD_RES_IOCSLOW,
base + (slot << 14) + (i << 19),
PODSLOT_IOC_SIZE, IORESOURCE_MEM);
}
for (i = 0; i < ECARD_NUM_RESOURCES; i++) {
if (ec->resource[i].start &&
request_resource(&iomem_resource, &ec->resource[i])) {
printk(KERN_ERR "%s: resource(s) not available\n",
ec->dev.bus_id);
ec->resource[i].end -= ec->resource[i].start;
ec->resource[i].start = 0;
}
}
}
static ssize_t ecard_show_irq(struct device *dev, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%u\n", ec->irq);
}
static DEVICE_ATTR(irq, S_IRUGO, ecard_show_irq, NULL);
static ssize_t ecard_show_dma(struct device *dev, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%u\n", ec->dma);
}
static DEVICE_ATTR(dma, S_IRUGO, ecard_show_dma, NULL);
static ssize_t ecard_show_resources(struct device *dev, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
char *str = buf;
int i;
for (i = 0; i < ECARD_NUM_RESOURCES; i++)
str += sprintf(str, "%08lx %08lx %08lx\n",
ec->resource[i].start,
ec->resource[i].end,
ec->resource[i].flags);
return str - buf;
}
static DEVICE_ATTR(resource, S_IRUGO, ecard_show_resources, NULL);
/*
* Probe for an expansion card.
*
......@@ -949,6 +1033,16 @@ ecard_probe(int slot, card_type_t type)
break;
}
snprintf(ec->dev.bus_id, sizeof(ec->dev.bus_id), "ecard%d", slot);
snprintf(ec->dev.name, sizeof(ec->dev.name), "ecard %04x:%04x",
ec->cid.manufacturer, ec->cid.product);
ec->dev.parent = NULL;
ec->dev.bus = &ecard_bus_type;
ec->dev.dma_mask = &ec->dma_mask;
ec->dma_mask = (u64)0xffffffff;
ecard_init_resources(ec);
/*
* hook the interrupt handlers
*/
......@@ -974,14 +1068,10 @@ ecard_probe(int slot, card_type_t type)
*ecp = ec;
slot_to_expcard[slot] = ec;
snprintf(ec->dev.bus_id, sizeof(ec->dev.bus_id), "ecard%d", slot);
strcpy(ec->dev.name, "fixme!");
ec->dev.parent = NULL;
ec->dev.bus = &ecard_bus_type;
ec->dev.dma_mask = &ec->dma_mask;
ec->dma_mask = (u64)0xffffffff;
device_register(&ec->dev);
device_create_file(&ec->dev, &dev_attr_dma);
device_create_file(&ec->dev, &dev_attr_irq);
device_create_file(&ec->dev, &dev_attr_resource);
return 0;
......
......@@ -78,7 +78,8 @@ static struct irqdesc bad_irq_desc = {
* disable_irq - disable an irq and wait for completion
* @irq: Interrupt to disable
*
* Disable the selected interrupt line. We do this lazily.
* Disable the selected interrupt line. Enables and disables
* are nested. We do this lazily.
*
* This function may be called from IRQ context.
*/
......@@ -88,8 +89,7 @@ void disable_irq(unsigned int irq)
unsigned long flags;
spin_lock_irqsave(&irq_controller_lock, flags);
if (!desc->depth++)
desc->enabled = 0;
desc->disable_depth++;
spin_unlock_irqrestore(&irq_controller_lock, flags);
}
......@@ -107,24 +107,25 @@ void enable_irq(unsigned int irq)
{
struct irqdesc *desc = irq_desc + irq;
unsigned long flags;
int pending = 0;
spin_lock_irqsave(&irq_controller_lock, flags);
if (unlikely(!desc->depth)) {
if (unlikely(!desc->disable_depth)) {
printk("enable_irq(%u) unbalanced from %p\n", irq,
__builtin_return_address(0));
} else if (!--desc->depth) {
} else if (!--desc->disable_depth) {
desc->probing = 0;
desc->enabled = 1;
desc->chip->unmask(irq);
pending = desc->pending;
desc->pending = 0;
/*
* If the interrupt was waiting to be processed,
* retrigger it.
* If the interrupt is waiting to be processed,
* try to re-run it. We can't directly run it
* from here since the caller might be in an
* interrupt-protected region.
*/
if (pending)
if (desc->pending) {
desc->pending = 0;
desc->chip->rerun(irq);
}
}
spin_unlock_irqrestore(&irq_controller_lock, flags);
}
......@@ -264,7 +265,7 @@ do_edge_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
* we shouldn't process the IRQ. Instead, turn on the
* hardware masks.
*/
if (unlikely(desc->running || !desc->enabled))
if (unlikely(desc->running || desc->disable_depth))
goto running;
/*
......@@ -286,13 +287,13 @@ do_edge_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
if (!action)
break;
if (desc->pending && desc->enabled) {
if (desc->pending && !desc->disable_depth) {
desc->pending = 0;
desc->chip->unmask(irq);
}
__do_irq(irq, action, regs);
} while (desc->pending && desc->enabled);
} while (desc->pending && !desc->disable_depth);
desc->running = 0;
......@@ -328,7 +329,7 @@ do_level_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
*/
desc->chip->ack(irq);
if (likely(desc->enabled)) {
if (likely(!desc->disable_depth)) {
kstat_cpu(cpu).irqs[irq]++;
/*
......@@ -338,7 +339,7 @@ do_level_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs)
if (action) {
__do_irq(irq, desc->action, regs);
if (likely(desc->enabled &&
if (likely(!desc->disable_depth &&
!check_irq_lock(desc, irq, regs)))
desc->chip->unmask(irq);
}
......@@ -390,14 +391,13 @@ void __set_irq_handler(unsigned int irq, irq_handler_t handle, int is_chained)
if (handle == do_bad_IRQ) {
desc->chip->mask(irq);
desc->chip->ack(irq);
desc->depth = 1;
desc->enabled = 0;
desc->disable_depth = 1;
}
desc->handle = handle;
if (handle != do_bad_IRQ && is_chained) {
desc->valid = 0;
desc->probe_ok = 0;
desc->depth = 0;
desc->disable_depth = 0;
desc->chip->unmask(irq);
}
spin_unlock_irqrestore(&irq_controller_lock, flags);
......@@ -512,10 +512,9 @@ int setup_irq(unsigned int irq, struct irqaction *new)
desc->probing = 0;
desc->running = 0;
desc->pending = 0;
desc->depth = 1;
desc->disable_depth = 1;
if (!desc->noautoenable) {
desc->depth = 0;
desc->enabled = 1;
desc->disable_depth = 0;
desc->chip->unmask(irq);
}
}
......
......@@ -20,6 +20,7 @@
#include <linux/tty.h>
#include <linux/init.h>
#include <linux/root_dev.h>
#include <linux/cpu.h>
#include <asm/elf.h>
#include <asm/hardware.h>
......@@ -691,6 +692,15 @@ void __init setup_arch(char **cmdline_p)
#endif
}
static struct cpu cpu[1];
static int __init topology_init(void)
{
return register_cpu(cpu, 0, NULL);
}
subsys_initcall(topology_init);
static const char *hwcap_str[] = {
"swp",
"half",
......
......@@ -53,7 +53,8 @@ static const char *handler[]= { "prefetch abort", "data abort", "address excepti
void dump_backtrace_entry(unsigned long where, unsigned long from)
{
printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
print_symbol(" %s\n", where);
print_symbol(" %s", where);
printk("\n");
}
/*
......
......@@ -4,7 +4,7 @@
# Object file lists.
obj-y := core.o io.o time.o
obj-y := core.o io.o
obj-m :=
obj-n :=
obj- :=
......
/*
* linux/arch/arm/mach-ebsa110/time.c
*
* Copyright (C) 2001 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <asm/io.h>
#define PIT_CTRL (PIT_BASE + 0x0d)
#define PIT_T2 (PIT_BASE + 0x09)
#define PIT_T1 (PIT_BASE + 0x05)
#define PIT_T0 (PIT_BASE + 0x01)
/*
* This is the rate at which your MCLK signal toggles (in Hz)
* This was measured on a 10 digit frequency counter sampling
* over 1 second.
*/
#define MCLK 47894000
/*
* This is the rate at which the PIT timers get clocked
*/
#define CLKBY7 (MCLK / 7)
/*
* If CLKBY7 is larger than this, then we must do software
* division of the timer interrupt.
*/
#if CLKBY7 > 6553500
#define DIVISOR 2
#else
#define DIVISOR 1
#endif
/*
* This is the counter value
*/
#define COUNT ((CLKBY7 + (DIVISOR * HZ / 2)) / (DIVISOR * HZ))
extern unsigned long (*gettimeoffset)(void);
static unsigned long divisor;
/*
* Get the time offset from the system PIT. Note that if we have missed an
* interrupt, then the PIT counter will roll over (ie, be negative).
* This actually works out to be convenient.
*/
static unsigned long ebsa110_gettimeoffset(void)
{
unsigned long offset, count;
__raw_writeb(0x40, PIT_CTRL);
count = __raw_readb(PIT_T1);
count |= __raw_readb(PIT_T1) << 8;
/*
* If count > COUNT, make the number negative.
*/
if (count > COUNT)
count |= 0xffff0000;
offset = COUNT * (DIVISOR - divisor);
offset -= count;
/*
* `offset' is in units of timer counts. Convert
* offset to units of microseconds.
*/
offset = offset * (1000000 / HZ) / (COUNT * DIVISOR);
return offset;
}
int ebsa110_reset_timer(void)
{
u32 count;
/* latch and read timer 1 */
__raw_writeb(0x40, PIT_CTRL);
count = __raw_readb(PIT_T1);
count |= __raw_readb(PIT_T1) << 8;
count += COUNT;
__raw_writeb(count & 0xff, PIT_T1);
__raw_writeb(count >> 8, PIT_T1);
if (divisor == 0)
divisor = DIVISOR;
divisor -= 1;
return divisor;
}
void __init ebsa110_setup_timer(void)
{
/*
* Timer 1, mode 2, LSB/MSB
*/
__raw_writeb(0x70, PIT_CTRL);
__raw_writeb(COUNT & 0xff, PIT_T1);
__raw_writeb(COUNT >> 8, PIT_T1);
divisor = DIVISOR - 1;
gettimeoffset = ebsa110_gettimeoffset;
}
......@@ -31,6 +31,7 @@
#include <linux/init.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/system.h>
#include <asm/mach/pci.h>
......@@ -295,7 +296,7 @@ static int v3_read_config(struct pci_bus *bus, unsigned int devfn, int where,
v = __raw_readw(addr);
break;
case 4:
default:
v = __raw_readl(addr);
break;
}
......
......@@ -165,6 +165,13 @@ config SA1100_JORNADA720
handheld computer. See <http://www.hp.com/jornada/products/720>
for details.
config SA1100_HACKKIT
bool "HackKit Core CPU Board"
depends on ARCH_SA1100
help
Say Y here to support the HackKit Core CPU Board
<http://hackkit.eletztrick.de>;
config SA1100_HUW_WEBPANEL
bool "HuW WebPanel"
depends on ARCH_SA1100
......@@ -307,6 +314,18 @@ config SA1100_STORK
Say Y here if you intend to run this kernel on the Stork
handheld computer.
#config SA1100_TRIZEPS
# bool "Trizeps"
# depends on ARCH_SA1100
# help
# :: write me ::
#config TRIZEPS_MFTB2
# bool "MFTB2"
# depends on SA1100_TRIZEPS
# help
# :: write me ::
config SA1100_USB
tristate "SA1100 USB function support"
depends on ARCH_SA1100
......
......@@ -9,20 +9,18 @@ obj-n :=
obj- :=
led-y := leds.o
export-objs := dma.o generic.o pcipool.o pm.o sa1111.o sa1111-pcibuf.o
export-objs := dma.o generic.o pm.o
# This needs to be cleaned up. We probably need to have SA1100
# and SA1110 config symbols.
ifeq ($(CONFIG_CPU_FREQ),y)
obj-$(CONFIG_SA1100_ASSABET) += cpu-sa1110.o
obj-$(CONFIG_SA1100_CERF) += cpu-sa1110.o
obj-$(CONFIG_SA1100_HACKKIT) += cpu-sa1110.o
obj-$(CONFIG_SA1100_LART) += cpu-sa1100.o
obj-$(CONFIG_SA1100_PT_SYSTEM3) += cpu-sa1110.o
endif
# Next, the SA1111 stuff.
obj-$(CONFIG_SA1111) += sa1111.o sa1111-pcibuf.o pcipool.o
# Specific board support
obj-$(CONFIG_SA1100_ADSBITSY) += adsbitsy.o
led-$(CONFIG_SA1100_ADSBITSY) += leds-adsbitsy.o
......@@ -60,6 +58,9 @@ led-$(CONFIG_SA1100_GRAPHICSMASTER) += leds-graphicsmaster.o
obj-$(CONFIG_SA1100_H3600) += h3600.o
export-objs += h3600.o
obj-$(CONFIG_SA1100_HACKKIT) += hackkit.o
led-$(CONFIG_SA1100_HACKKIT) += leds-hackkit.o
obj-$(CONFIG_SA1100_HUW_WEBPANEL) += huw_webpanel.o
export-objs += huw_webpanel.o
......@@ -94,6 +95,9 @@ led-$(CONFIG_SA1100_SIMPAD) += leds-simpad.o
obj-$(CONFIG_SA1100_STORK) += stork.o
export-objs += stork.o
obj-$(CONFIG_SA1100_TRIZEPS) += trizeps.o
export-objs += trizeps.o
obj-$(CONFIG_SA1100_XP860) += xp860.o
obj-$(CONFIG_SA1100_YOPY) += yopy.o
......@@ -106,4 +110,4 @@ obj-$(CONFIG_LEDS) += $(led-y)
#obj-$(CONFIG_SA1100_USB) += usb/
# Miscelaneous functions
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_PM) += pm.o sleep.o
/*
* linux/arch/arm/mach-sa1100/hackkit.c
*
* Copyright (C) 2002 Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
*
* This file contains all HackKit tweaks. Based on original work from
* Nicolas Pitre's assabet fixes
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/cpufreq.h>
#include <linux/serial_core.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/serial_sa1100.h>
#include "generic.h"
/**********************************************************************
* prototypes
*/
/* init funcs */
static void __init get_hackkit_scr(void);
static int __init hackkit_init(void);
static void __init hackkit_init_irq(void);
static void __init hackkit_map_io(void);
static u_int hackkit_get_mctrl(struct uart_port *port);
static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl);
static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate);
/**********************************************************************
* global data
*/
/**********************************************************************
* static data
*/
static struct map_desc hackkit_io_desc[] __initdata = {
/* virtual physical length type */
{ 0xe8000000, 0x00000000, 0x01000000, MT_DEVICE } /* Flash bank 0 */
};
static struct sa1100_port_fns hackkit_port_fns __initdata = {
.set_mctrl = hackkit_set_mctrl,
.get_mctrl = hackkit_get_mctrl,
.pm = hackkit_uart_pm,
};
/**********************************************************************
* Static functions
*/
static void __init hackkit_map_io(void)
{
sa1100_map_io();
iotable_init(hackkit_io_desc, ARRAY_SIZE(hackkit_io_desc));
sa1100_register_uart_fns(&hackkit_port_fns);
sa1100_register_uart(0, 1); /* com port */
sa1100_register_uart(1, 2);
sa1100_register_uart(2, 3); /* radio module */
Ser1SDCR0 |= SDCR0_SUS;
}
static void __init hackkit_init_irq(void)
{
/* none used yet */
}
/**
* hackkit_uart_pm - powermgmt callback function for system 3 UART
* @port: uart port structure
* @state: pm state
* @oldstate: old pm state
*
*/
static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
{
/* TODO: switch on/off uart in powersave mode */
}
/*
* Note! this can be called from IRQ context.
* FIXME: No modem ctrl lines yet.
*/
static void hackkit_set_mctrl(struct uart_port *port, u_int mctrl)
{
#if 0
if (port->mapbase == _Ser1UTCR0) {
u_int set = 0, clear = 0;
if (mctrl & TIOCM_RTS)
set |= PT_CTRL2_RS1_RTS;
else
clear |= PT_CTRL2_RS1_RTS;
if (mctrl & TIOCM_DTR)
set |= PT_CTRL2_RS1_DTR;
else
clear |= PT_CTRL2_RS1_DTR;
PTCTRL2_clear(clear);
PTCTRL2_set(set);
}
#endif
}
static u_int hackkit_get_mctrl(struct uart_port *port)
{
u_int ret = 0;
#if 0
u_int irqsr = PT_IRQSR;
/* need 2 reads to read current value */
irqsr = PT_IRQSR;
/* TODO: check IRQ source register for modem/com
status lines and set them correctly. */
#endif
ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
return ret;
}
static int __init hackkit_init(void)
{
int ret = 0;
if ( !machine_is_hackkit() ) {
ret = -EINVAL;
goto DONE;
}
hackkit_init_irq();
ret = 0;
DONE:
return ret;
}
/**********************************************************************
* Exported Functions
*/
/**********************************************************************
* kernel magic macros
*/
arch_initcall(hackkit_init);
MACHINE_START(HACKKIT, "HackKit Cpu Board")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
BOOT_PARAMS(0xc0000100)
MAPIO(hackkit_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
/*
* linux/arch/arm/mach-sa1100/leds-hackkit.c
*
* based on leds-lart.c
*
* (C) Erik Mouw (J.A.K.Mouw@its.tudelft.nl), April 21, 2000
* (C) Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>, 2002
*
* The HackKit has two leds (GPIO 22/23). The red led (gpio 22) is used
* as cpu led, the green one is used as timer led.
*/
#include <linux/config.h>
#include <linux/init.h>
#include <asm/hardware.h>
#include <asm/leds.h>
#include <asm/system.h>
#include "leds.h"
#define LED_STATE_ENABLED 1
#define LED_STATE_CLAIMED 2
static unsigned int led_state;
static unsigned int hw_led_state;
#define LED_GREEN GPIO_GPIO23
#define LED_RED GPIO_GPIO22
#define LED_MASK (LED_RED | LED_GREEN)
void hackkit_leds_event(led_event_t evt)
{
unsigned long flags;
local_irq_save(flags);
switch(evt) {
case led_start:
/* pin 22/23 are outputs */
GPDR |= LED_MASK;
hw_led_state = LED_MASK;
led_state = LED_STATE_ENABLED;
break;
case led_stop:
led_state &= ~LED_STATE_ENABLED;
break;
case led_claim:
led_state |= LED_STATE_CLAIMED;
hw_led_state = LED_MASK;
break;
case led_release:
led_state &= ~LED_STATE_CLAIMED;
hw_led_state = LED_MASK;
break;
#ifdef CONFIG_LEDS_TIMER
case led_timer:
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state ^= LED_GREEN;
break;
#endif
#ifdef CONFIG_LEDS_CPU
case led_idle_start:
/* The LART people like the LED to be off when the
system is idle... */
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state &= ~LED_RED;
break;
case led_idle_end:
/* ... and on if the system is not idle */
if (!(led_state & LED_STATE_CLAIMED))
hw_led_state |= LED_RED;
break;
#endif
case led_red_on:
if (led_state & LED_STATE_CLAIMED)
hw_led_state &= ~LED_RED;
break;
case led_red_off:
if (led_state & LED_STATE_CLAIMED)
hw_led_state |= LED_RED;
break;
case led_green_on:
if (led_state & LED_STATE_CLAIMED)
hw_led_state &= ~LED_GREEN;
break;
case led_green_off:
if (led_state & LED_STATE_CLAIMED)
hw_led_state |= LED_GREEN;
break;
default:
break;
}
/* Now set the GPIO state, or nothing will happen at all */
if (led_state & LED_STATE_ENABLED) {
GPSR = hw_led_state;
GPCR = hw_led_state ^ LED_MASK;
}
local_irq_restore(flags);
}
......@@ -29,6 +29,8 @@ sa1100_leds_init(void)
leds_event = flexanet_leds_event;
if (machine_is_graphicsclient())
leds_event = graphicsclient_leds_event;
if (machine_is_hackkit())
leds_event = hackkit_leds_event;
if (machine_is_lart())
leds_event = lart_leds_event;
if (machine_is_pfs168())
......
......@@ -5,6 +5,7 @@ extern void brutus_leds_event(led_event_t evt);
extern void cerf_leds_event(led_event_t evt);
extern void flexanet_leds_event(led_event_t evt);
extern void graphicsclient_leds_event(led_event_t evt);
extern void hackkit_leds_event(led_event_t evt);
extern void lart_leds_event(led_event_t evt);
extern void pfs168_leds_event(led_event_t evt);
extern void graphicsmaster_leds_event(led_event_t evt);
......
/*
* linux/arch/arm/mach-sa1100/trizeps.c
*
* Authors:
* Andreas Hofer <ho@dsa-ac.de>,
* Peter Lueg <pl@dsa-ac.de>,
* Guennadi Liakhovetski <gl@dsa-ac.de>
*
* This file contains all Trizeps-specific tweaks.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/arch/trizeps.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/serial_sa1100.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <asm/arch/serial.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/arch/irqs.h>
#include "generic.h"
#undef DEBUG_TRIZEPS
#ifdef DEBUG_TRIZEPS
#define DPRINTK(fmt, args...) printk("%s: " fmt, __FUNCTION__ , ## args)
#else
#define DPRINTK( x... )
#endif
static struct tri_uart_cts_data_t tri_uart_cts_data[] = {
{ TRIZEPS_GPIO_UART1_CTS, 0, NULL, NULL,"int. UART1 cts" },
{ TRIZEPS_GPIO_UART2_CTS, 0, NULL, NULL,"int. UART2 cts" },
{ TRIZEPS_GPIO_UART3_CTS, 0, NULL, NULL,"int. UART3 cts" }
};
static void trizeps_cts_intr(int irq, void *dev_id, struct pt_regs *regs)
{
struct tri_uart_cts_data_t * uart_data = (struct tri_uart_cts_data_t *)dev_id;
int cts = (!(GPLR & uart_data->cts_gpio));
/* NOTE: I suppose that we will not get any interrupts
if the GPIO is not changed, so maybe
the cts_prev_state can be removed ... */
if (cts != uart_data->cts_prev_state) {
uart_data->cts_prev_state = cts;
uart_handle_cts_change(uart_data->port, cts);
DPRINTK("(IRQ %d) changed (cts=%d) stop=%d\n",
irq, cts, uart_data->info->tty->hw_stopped);
}
}
static int
trizeps_register_cts_intr(int gpio,
int irq,
struct tri_uart_cts_data_t *uart_data)
{
int ret = 0;
if(irq != NO_IRQ)
{
set_irq_type(irq, IRQT_BOTHEDGE);
ret = request_irq(irq, trizeps_cts_intr,
SA_INTERRUPT, uart_data->name, uart_data);
if (ret)
printk(KERN_ERR "uart_open: failed to register CTS irq (%d)\n", ret);
}
return ret;
}
static void trizeps_set_mctrl(struct uart_port *port, u_int mctrl)
{
if (port->mapbase == _Ser1UTCR0)
{
/**** ttySA1 ****/
if (mctrl & TIOCM_RTS)
GPCR |= TRIZEPS_GPIO_UART1_RTS;
else
GPSR |= TRIZEPS_GPIO_UART1_RTS;
DPRINTK("2 ttySA%d Set RTS %s\n",port->line,
mctrl & TIOCM_RTS ? "low" : "high");
}
else if (port->mapbase == _Ser3UTCR0)
{
/**** ttySA0 ****/
}
else
{
/**** ttySA2 ****/
}
}
static u_int trizeps_get_mctrl(struct uart_port *port)
{
int result = TIOCM_CD | TIOCM_DSR;
if (port->mapbase == _Ser1UTCR0)
{
if (!(GPLR & TRIZEPS_GPIO_UART1_CTS))
result |= TIOCM_CTS;
}
else if (port->mapbase == _Ser2UTCR0)
{
result |= TIOCM_CTS;
}
else if (port->mapbase == _Ser3UTCR0)
{
result |= TIOCM_CTS;
}
else
{
result = TIOCM_CTS;
}
DPRINTK(" ttySA%d %s%s%s\n",port->line,
result & TIOCM_CD ? "CD " : "",
result & TIOCM_CTS ? "CTS " : "",
result & TIOCM_DSR ? "DSR " : "");
return result;
}
static struct sa1100_port_fns trizeps_port_fns __initdata = {
.set_mctrl = trizeps_set_mctrl,
.get_mctrl = trizeps_get_mctrl,
};
static void trizeps_power_off(void)
{
printk("trizeps power off\n");
mdelay(100);
cli();
/* disable internal oscillator, float CS lines */
PCFR = (PCFR_OPDE | PCFR_FP | PCFR_FS);
/* enable wake-up on GPIO0 (Assabet...) */
PWER = GFER = GRER = 1;
/*
* set scratchpad to zero, just in case it is used as a
* restart address by the bootloader.
*/
PSPR = 0;
/*
* Power off
* -> disconnect AKku
*/
TRIZEPS_BCR_set(TRIZEPS_BCR0, TRIZEPS_MFT_OFF);
/*
* if power supply no Akku
* -> enter sleep mode
*/
PMCR = PMCR_SF;
}
static int __init trizeps_init(void)
{
if (!machine_is_trizeps())
return -EINVAL;
DPRINTK(" \n");
pm_power_off = trizeps_power_off;
// Init UART2 for IrDA
// PPDR |= PPC_TXD2; // Set TXD2 as output
Ser2UTCR4 = UTCR4_HSE; // enable HSE
Ser2HSCR0 = 0;
Ser2HSSR0 = HSSR0_EIF | HSSR0_TUR | HSSR0_RAB | HSSR0_FRE;
/* Init MECR */
MECR = 0x00060006;
/* Set up external serial IRQs */
GAFR &= ~(GPIO_GPIO16 | GPIO_GPIO17); // no alternate function
GPDR &= ~(GPIO_GPIO16 | GPIO_GPIO17); // Set to Input
set_irq_type(IRQ_GPIO16, IRQT_RISING);
set_irq_type(IRQ_GPIO17, IRQT_RISING);
return 0;
}
__initcall(trizeps_init);
static struct map_desc trizeps_io_desc[] __initdata = {
/* virtual physical length type */
{ 0xF0000000l, 0x30000000l, 0x00800000l, MT_DEVICE },
{ 0xF2000000l, 0x38000000l, 0x00800000l, MT_DEVICE },
};
static void __init trizeps_map_io(void)
{
sa1100_map_io();
iotable_init(trizeps_io_desc, ARRAY_SIZE(trizeps_io_desc));
sa1100_register_uart_fns(&trizeps_port_fns);
sa1100_register_uart(0, 3);
sa1100_register_uart(1, 1);
sa1100_register_uart(2, 2);
}
MACHINE_START(TRIZEPS, "TRIZEPS")
MAINTAINER("DSA")
BOOT_MEM(0xc0000000, 0x80000000, 0xf8000000)
MAPIO(trizeps_map_io)
INITIRQ(sa1100_init_irq)
MACHINE_END
......@@ -338,9 +338,9 @@ asmlinkage unsigned int do_IRQ(struct pt_regs regs)
__asm__ __volatile__("andl %%esp,%0" :
"=r" (esp) : "0" (8191));
if (unlikely(esp < (sizeof(struct task_struct) + 1024))) {
if (unlikely(esp < (sizeof(struct thread_info) + 1024))) {
printk("do_IRQ: stack overflow: %ld\n",
esp - sizeof(struct task_struct));
esp - sizeof(struct thread_info));
dump_stack();
}
}
......
......@@ -9,6 +9,9 @@
*/
#include <linux/config.h>
#ifdef CONFIG_SPARC32_COMPAT
#include <linux/compat.h> /* for compat_old_sigset_t */
#endif
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/signal.h>
......@@ -247,7 +250,7 @@ asmlinkage void _sigpause_common(old_sigset_t set, struct pt_regs *regs)
#ifdef CONFIG_SPARC32_COMPAT
if (test_thread_flag(TIF_32BIT)) {
extern asmlinkage void _sigpause32_common(old_sigset_t32,
extern asmlinkage void _sigpause32_common(compat_old_sigset_t,
struct pt_regs *);
_sigpause32_common(set, regs);
return;
......
......@@ -56,7 +56,7 @@ struct signal_sframe32 {
/* struct sigcontext32 * */ u32 sig_scptr;
int sig_address;
struct sigcontext32 sig_context;
unsigned extramask[_NSIG_WORDS32 - 1];
unsigned extramask[_COMPAT_NSIG_WORDS - 1];
};
/*
......@@ -69,7 +69,7 @@ struct new_signal_frame32 {
__siginfo32_t info;
/* __siginfo_fpu32_t * */ u32 fpu_save;
unsigned int insns [2];
unsigned extramask[_NSIG_WORDS32 - 1];
unsigned extramask[_COMPAT_NSIG_WORDS - 1];
unsigned extra_size; /* Should be sizeof(siginfo_extra_v8plus_t) */
/* Only valid if (info.si_regs.psr & (PSR_VERS|PSR_IMPL)) == PSR_V8PLUS */
siginfo_extra_v8plus_t v8plus;
......@@ -80,7 +80,7 @@ struct rt_signal_frame32 {
struct sparc_stackf32 ss;
siginfo_t32 info;
struct pt_regs32 regs;
sigset_t32 mask;
compat_sigset_t mask;
/* __siginfo_fpu32_t * */ u32 fpu_save;
unsigned int insns [2];
stack_t32 stack;
......@@ -139,7 +139,7 @@ int copy_siginfo_to_user32(siginfo_t32 *to, siginfo_t *from)
* atomically swap in the new signal mask, and wait for a signal.
* This is really tricky on the Sparc, watch out...
*/
asmlinkage void _sigpause32_common(old_sigset_t32 set, struct pt_regs *regs)
asmlinkage void _sigpause32_common(compat_old_sigset_t set, struct pt_regs *regs)
{
sigset_t saveset;
......@@ -179,7 +179,7 @@ asmlinkage void _sigpause32_common(old_sigset_t32 set, struct pt_regs *regs)
asmlinkage void do_rt_sigsuspend32(u32 uset, size_t sigsetsize, struct pt_regs *regs)
{
sigset_t oldset, set;
sigset_t32 set32;
compat_sigset_t set32;
/* XXX: Don't preclude handling different sized sigset_t's. */
if (((compat_size_t)sigsetsize) != sizeof(sigset_t)) {
......@@ -256,7 +256,7 @@ void do_new_sigreturn32(struct pt_regs *regs)
unsigned int psr;
unsigned pc, npc, fpu_save;
sigset_t set;
unsigned seta[_NSIG_WORDS32];
unsigned seta[_COMPAT_NSIG_WORDS];
int err, i;
regs->u_regs[UREG_FP] &= 0x00000000ffffffffUL;
......@@ -302,7 +302,7 @@ void do_new_sigreturn32(struct pt_regs *regs)
if (fpu_save)
err |= restore_fpu_state32(regs, &sf->fpu_state);
err |= __get_user(seta[0], &sf->info.si_mask);
err |= copy_from_user(seta+1, &sf->extramask, (_NSIG_WORDS32 - 1) * sizeof(unsigned));
err |= copy_from_user(seta+1, &sf->extramask, (_COMPAT_NSIG_WORDS - 1) * sizeof(unsigned));
if (err)
goto segv;
switch (_NSIG_WORDS) {
......@@ -327,7 +327,7 @@ asmlinkage void do_sigreturn32(struct pt_regs *regs)
struct sigcontext32 *scptr;
unsigned pc, npc, psr;
sigset_t set;
unsigned seta[_NSIG_WORDS32];
unsigned seta[_COMPAT_NSIG_WORDS];
int err;
synchronize_user_stack();
......@@ -349,7 +349,7 @@ asmlinkage void do_sigreturn32(struct pt_regs *regs)
err |= __get_user(seta[0], &scptr->sigc_mask);
/* Note that scptr + 1 points to extramask */
err |= copy_from_user(seta+1, scptr + 1, (_NSIG_WORDS32 - 1) * sizeof(unsigned));
err |= copy_from_user(seta+1, scptr + 1, (_COMPAT_NSIG_WORDS - 1) * sizeof(unsigned));
if (err)
goto segv;
switch (_NSIG_WORDS) {
......@@ -393,7 +393,7 @@ asmlinkage void do_rt_sigreturn32(struct pt_regs *regs)
unsigned pc, npc, fpu_save;
mm_segment_t old_fs;
sigset_t set;
sigset_t32 seta;
compat_sigset_t seta;
stack_t st;
int err, i;
......@@ -440,7 +440,7 @@ asmlinkage void do_rt_sigreturn32(struct pt_regs *regs)
err |= __get_user(fpu_save, &sf->fpu_save);
if (fpu_save)
err |= restore_fpu_state32(regs, &sf->fpu_state);
err |= copy_from_user(&seta, &sf->mask, sizeof(sigset_t32));
err |= copy_from_user(&seta, &sf->mask, sizeof(compat_sigset_t));
err |= __get_user((long)st.ss_sp, &sf->stack.ss_sp);
err |= __get_user(st.ss_flags, &sf->stack.ss_flags);
err |= __get_user(st.ss_size, &sf->stack.ss_size);
......@@ -498,7 +498,7 @@ setup_frame32(struct sigaction *sa, struct pt_regs *regs, int signr, sigset_t *o
{
struct signal_sframe32 *sframep;
struct sigcontext32 *sc;
unsigned seta[_NSIG_WORDS32];
unsigned seta[_COMPAT_NSIG_WORDS];
int err = 0;
void *sig_address;
int sig_code;
......@@ -544,7 +544,7 @@ setup_frame32(struct sigaction *sa, struct pt_regs *regs, int signr, sigset_t *o
}
err |= __put_user(seta[0], &sc->sigc_mask);
err |= __copy_to_user(sframep->extramask, seta + 1,
(_NSIG_WORDS32 - 1) * sizeof(unsigned));
(_COMPAT_NSIG_WORDS - 1) * sizeof(unsigned));
err |= __put_user(regs->u_regs[UREG_FP], &sc->sigc_sp);
err |= __put_user(pc, &sc->sigc_pc);
err |= __put_user(npc, &sc->sigc_npc);
......@@ -673,7 +673,7 @@ static void new_setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
int sigframe_size;
u32 psr;
int i, err;
unsigned seta[_NSIG_WORDS32];
unsigned seta[_COMPAT_NSIG_WORDS];
/* 1. Make sure everything is clean */
synchronize_user_stack();
......@@ -729,7 +729,7 @@ static void new_setup_frame32(struct k_sigaction *ka, struct pt_regs *regs,
}
err |= __put_user(seta[0], &sf->info.si_mask);
err |= __copy_to_user(sf->extramask, seta + 1,
(_NSIG_WORDS32 - 1) * sizeof(unsigned));
(_COMPAT_NSIG_WORDS - 1) * sizeof(unsigned));
err |= copy_in_user((u32 *)sf,
(u32 *)(regs->u_regs[UREG_FP]),
......@@ -1098,7 +1098,7 @@ static void setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs,
int sigframe_size;
u32 psr;
int i, err;
sigset_t32 seta;
compat_sigset_t seta;
/* 1. Make sure everything is clean */
synchronize_user_stack();
......@@ -1160,7 +1160,7 @@ static void setup_rt_frame32(struct k_sigaction *ka, struct pt_regs *regs,
case 1: seta.sig[1] = (oldset->sig[0] >> 32);
seta.sig[0] = oldset->sig[0];
}
err |= __copy_to_user(&sf->mask, &seta, sizeof(sigset_t32));
err |= __copy_to_user(&sf->mask, &seta, sizeof(compat_sigset_t));
err |= copy_in_user((u32 *)sf,
(u32 *)(regs->u_regs[UREG_FP]),
......
......@@ -1681,7 +1681,7 @@ asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid, struct compat_times
extern asmlinkage int sys_sigprocmask(int how, old_sigset_t *set, old_sigset_t *oset);
asmlinkage int sys32_sigprocmask(int how, old_sigset_t32 *set, old_sigset_t32 *oset)
asmlinkage int sys32_sigprocmask(int how, compat_old_sigset_t *set, compat_old_sigset_t *oset)
{
old_sigset_t s;
int ret;
......@@ -1698,15 +1698,15 @@ asmlinkage int sys32_sigprocmask(int how, old_sigset_t32 *set, old_sigset_t32 *o
extern asmlinkage int sys_rt_sigprocmask(int how, sigset_t *set, sigset_t *oset, size_t sigsetsize);
asmlinkage int sys32_rt_sigprocmask(int how, sigset_t32 *set, sigset_t32 *oset, compat_size_t sigsetsize)
asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t *set, compat_sigset_t *oset, compat_size_t sigsetsize)
{
sigset_t s;
sigset_t32 s32;
compat_sigset_t s32;
int ret;
mm_segment_t old_fs = get_fs();
if (set) {
if (copy_from_user (&s32, set, sizeof(sigset_t32)))
if (copy_from_user (&s32, set, sizeof(compat_sigset_t)))
return -EFAULT;
switch (_NSIG_WORDS) {
case 4: s.sig[3] = s32.sig[6] | (((long)s32.sig[7]) << 32);
......@@ -1726,7 +1726,7 @@ asmlinkage int sys32_rt_sigprocmask(int how, sigset_t32 *set, sigset_t32 *oset,
case 2: s32.sig[3] = (s.sig[1] >> 32); s32.sig[2] = s.sig[1];
case 1: s32.sig[1] = (s.sig[0] >> 32); s32.sig[0] = s.sig[0];
}
if (copy_to_user (oset, &s32, sizeof(sigset_t32)))
if (copy_to_user (oset, &s32, sizeof(compat_sigset_t)))
return -EFAULT;
}
return 0;
......@@ -1734,7 +1734,7 @@ asmlinkage int sys32_rt_sigprocmask(int how, sigset_t32 *set, sigset_t32 *oset,
extern asmlinkage int sys_sigpending(old_sigset_t *set);
asmlinkage int sys32_sigpending(old_sigset_t32 *set)
asmlinkage int sys32_sigpending(compat_old_sigset_t *set)
{
old_sigset_t s;
int ret;
......@@ -1749,10 +1749,10 @@ asmlinkage int sys32_sigpending(old_sigset_t32 *set)
extern asmlinkage int sys_rt_sigpending(sigset_t *set, size_t sigsetsize);
asmlinkage int sys32_rt_sigpending(sigset_t32 *set, compat_size_t sigsetsize)
asmlinkage int sys32_rt_sigpending(compat_sigset_t *set, compat_size_t sigsetsize)
{
sigset_t s;
sigset_t32 s32;
compat_sigset_t s32;
int ret;
mm_segment_t old_fs = get_fs();
......@@ -1766,19 +1766,19 @@ asmlinkage int sys32_rt_sigpending(sigset_t32 *set, compat_size_t sigsetsize)
case 2: s32.sig[3] = (s.sig[1] >> 32); s32.sig[2] = s.sig[1];
case 1: s32.sig[1] = (s.sig[0] >> 32); s32.sig[0] = s.sig[0];
}
if (copy_to_user (set, &s32, sizeof(sigset_t32)))
if (copy_to_user (set, &s32, sizeof(compat_sigset_t)))
return -EFAULT;
}
return ret;
}
asmlinkage int
sys32_rt_sigtimedwait(sigset_t32 *uthese, siginfo_t32 *uinfo,
sys32_rt_sigtimedwait(compat_sigset_t *uthese, siginfo_t32 *uinfo,
struct compat_timespec *uts, compat_size_t sigsetsize)
{
int ret, sig;
sigset_t these;
sigset_t32 these32;
compat_sigset_t these32;
struct timespec ts;
siginfo_t info;
long timeout = 0;
......@@ -1787,7 +1787,7 @@ sys32_rt_sigtimedwait(sigset_t32 *uthese, siginfo_t32 *uinfo,
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
if (copy_from_user (&these32, uthese, sizeof(sigset_t32)))
if (copy_from_user (&these32, uthese, sizeof(compat_sigset_t)))
return -EFAULT;
switch (_NSIG_WORDS) {
......@@ -2718,7 +2718,7 @@ asmlinkage int sys32_sigaction (int sig, struct old_sigaction32 *act, struct old
}
if (act) {
old_sigset_t32 mask;
compat_old_sigset_t mask;
ret = get_user((long)new_ka.sa.sa_handler, &act->sa_handler);
ret |= __get_user((long)new_ka.sa.sa_restorer, &act->sa_restorer);
......@@ -2748,10 +2748,10 @@ sys32_rt_sigaction(int sig, struct sigaction32 *act, struct sigaction32 *oact,
{
struct k_sigaction new_ka, old_ka;
int ret;
sigset_t32 set32;
compat_sigset_t set32;
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t32))
if (sigsetsize != sizeof(compat_sigset_t))
return -EINVAL;
/* All tasks which use RT signals (effectively) use
......@@ -2762,7 +2762,7 @@ sys32_rt_sigaction(int sig, struct sigaction32 *act, struct sigaction32 *oact,
if (act) {
new_ka.ka_restorer = restorer;
ret = get_user((long)new_ka.sa.sa_handler, &act->sa_handler);
ret |= __copy_from_user(&set32, &act->sa_mask, sizeof(sigset_t32));
ret |= __copy_from_user(&set32, &act->sa_mask, sizeof(compat_sigset_t));
switch (_NSIG_WORDS) {
case 4: new_ka.sa.sa_mask.sig[3] = set32.sig[6] | (((long)set32.sig[7]) << 32);
case 3: new_ka.sa.sa_mask.sig[2] = set32.sig[4] | (((long)set32.sig[5]) << 32);
......@@ -2785,7 +2785,7 @@ sys32_rt_sigaction(int sig, struct sigaction32 *act, struct sigaction32 *oact,
case 1: set32.sig[1] = (old_ka.sa.sa_mask.sig[0] >> 32); set32.sig[0] = old_ka.sa.sa_mask.sig[0];
}
ret = put_user((long)old_ka.sa.sa_handler, &oact->sa_handler);
ret |= __copy_to_user(&oact->sa_mask, &set32, sizeof(sigset_t32));
ret |= __copy_to_user(&oact->sa_mask, &set32, sizeof(compat_sigset_t));
ret |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
ret |= __put_user((long)old_ka.sa.sa_restorer, &oact->sa_restorer);
if (ret)
......
......@@ -1297,7 +1297,7 @@ asmlinkage int sunos_sigaction (int sig, u32 act, u32 oact)
int ret;
if (act) {
old_sigset_t32 mask;
compat_old_sigset_t mask;
if (get_user((long)new_ka.sa.sa_handler, &((struct old_sigaction32 *)A(act))->sa_handler) ||
__get_user(new_ka.sa.sa_flags, &((struct old_sigaction32 *)A(act))->sa_flags))
......
......@@ -65,9 +65,6 @@ sys_call_table32:
.word sys32_ipc, sys32_sigreturn, sys_clone, sys_nis_syscall, sys32_adjtimex
/*220*/ .word sys32_sigprocmask, sys_ni_syscall, sys32_delete_module, sys_ni_syscall, sys_getpgid
.word sys32_bdflush, sys32_sysfs, sys_nis_syscall, sys32_setfsuid16, sys32_setfsgid16
/* 234 and 235 were for the hugetlb syscalls. They can be reused */
/*230*/ .word sys32_select, sys_time, sys_nis_syscall, sys_stime, sys_ni_syscall
.word sys_ni_syscall, sys_llseek, sys_mlock, sys_munlock, sys_mlockall
/*240*/ .word sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler
......
......@@ -14,6 +14,7 @@
#include <linux/string.h>
#include <linux/mc146818rtc.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/bcd.h>
#include "pcf8583.h"
......
......@@ -3110,7 +3110,8 @@ static struct ecard_driver acornscsi_driver = {
.remove = __devexit_p(acornscsi_remove),
.id_table = acornscsi_cids,
.drv = {
.name = "acornscsi",
.devclass = &shost_devclass,
.name = "acornscsi",
},
};
......
This diff is collapsed.
......@@ -334,7 +334,8 @@ static struct ecard_driver cumanascsi1_driver = {
.remove = __devexit_p(cumanascsi1_remove),
.id_table = cumanascsi1_cids,
.drv = {
.name = "cumanascsi1",
.devclass = &shost_devclass,
.name = "cumanascsi1",
},
};
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
......@@ -22,18 +22,18 @@
/* FAS register definitions */
/* transfer count low */
#define REG_CTCL(x) ((x)->scsi.io_port)
#define REG_STCL(x) ((x)->scsi.io_port)
#define REG_CTCL (0)
#define REG_STCL (0)
/* transfer count medium */
#define REG_CTCM(x) ((x)->scsi.io_port + (1 << (x)->scsi.io_shift))
#define REG_STCM(x) ((x)->scsi.io_port + (1 << (x)->scsi.io_shift))
#define REG_CTCM (1)
#define REG_STCM (1)
/* fifo data */
#define REG_FF(x) ((x)->scsi.io_port + (2 << (x)->scsi.io_shift))
#define REG_FF (2)
/* command */
#define REG_CMD(x) ((x)->scsi.io_port + (3 << (x)->scsi.io_shift))
#define REG_CMD (3)
#define CMD_NOP 0x00
#define CMD_FLUSHFIFO 0x01
#define CMD_RESETCHIP 0x02
......@@ -57,7 +57,7 @@
#define CMD_WITHDMA 0x80
/* status register (read) */
#define REG_STAT(x) ((x)->scsi.io_port + (4 << (x)->scsi.io_shift))
#define REG_STAT (4)
#define STAT_IO (1 << 0) /* IO phase */
#define STAT_CD (1 << 1) /* CD phase */
#define STAT_MSG (1 << 2) /* MSG phase */
......@@ -76,11 +76,11 @@
#define STAT_MESGIN (STAT_MSG|STAT_CD|STAT_IO) /* Message In */
/* bus ID for select / reselect */
#define REG_SDID(x) ((x)->scsi.io_port + (4 << (x)->scsi.io_shift))
#define REG_SDID (4)
#define BUSID(target) ((target) & 7)
/* Interrupt status register (read) */
#define REG_INST(x) ((x)->scsi.io_port + (5 << (x)->scsi.io_shift))
#define REG_INST (5)
#define INST_SELWOATN (1 << 0) /* Select w/o ATN */
#define INST_SELATN (1 << 1) /* Select w/ATN */
#define INST_RESELECTED (1 << 2) /* Reselected */
......@@ -91,10 +91,10 @@
#define INST_BUSRESET (1 << 7) /* SCSI Bus reset */
/* Timeout register (write) */
#define REG_STIM(x) ((x)->scsi.io_port + (5 << (x)->scsi.io_shift))
#define REG_STIM (5)
/* Sequence step register (read) */
#define REG_IS(x) ((x)->scsi.io_port + (6 << (x)->scsi.io_shift))
#define REG_IS (6)
#define IS_BITS 0x07
#define IS_SELARB 0x00 /* Select & Arb ok */
#define IS_MSGBYTESENT 0x01 /* One byte message sent*/
......@@ -104,18 +104,18 @@
#define IS_SOF 0x08 /* Sync off flag */
/* Transfer period step (write) */
#define REG_STP(x) ((x)->scsi.io_port + (6 << (x)->scsi.io_shift))
#define REG_STP (6)
/* Synchronous Offset (write) */
#define REG_SOF(x) ((x)->scsi.io_port + (7 << (x)->scsi.io_shift))
#define REG_SOF (7)
/* Fifo state register (read) */
#define REG_CFIS(x) ((x)->scsi.io_port + (7 << (x)->scsi.io_shift))
#define REG_CFIS (7)
#define CFIS_CF 0x1f /* Num bytes in FIFO */
#define CFIS_IS 0xe0 /* Step */
/* config register 1 */
#define REG_CNTL1(x) ((x)->scsi.io_port + (8 << (x)->scsi.io_shift))
#define REG_CNTL1 (8)
#define CNTL1_CID (7 << 0) /* Chip ID */
#define CNTL1_STE (1 << 3) /* Self test enable */
#define CNTL1_PERE (1 << 4) /* Parity enable reporting en. */
......@@ -124,7 +124,7 @@
#define CNTL1_ETM (1 << 7) /* Extended Timing Mode */
/* Clock conversion factor (read) */
#define REG_CLKF(x) ((x)->scsi.io_port + (9 << (x)->scsi.io_shift))
#define REG_CLKF (9)
#define CLKF_F37MHZ 0x00 /* 35.01 - 40 MHz */
#define CLKF_F10MHZ 0x02 /* 10 MHz */
#define CLKF_F12MHZ 0x03 /* 10.01 - 15 MHz */
......@@ -134,13 +134,13 @@
#define CLKF_F32MHZ 0x07 /* 30.01 - 35 MHz */
/* Chip test register (write) */
#define REG0_FTM(x) ((x)->scsi.io_port + (10 << (x)->scsi.io_shift))
#define REG_FTM (10)
#define TEST_FTM 0x01 /* Force target mode */
#define TEST_FIM 0x02 /* Force initiator mode */
#define TEST_FHI 0x04 /* Force high impedance mode */
/* Configuration register 2 (read/write) */
#define REG_CNTL2(x) ((x)->scsi.io_port + (11 << (x)->scsi.io_shift))
#define REG_CNTL2 (11)
#define CNTL2_PGDP (1 << 0) /* Pass Th/Generate Data Parity */
#define CNTL2_PGRP (1 << 1) /* Pass Th/Generate Reg Parity */
#define CNTL2_ACDPE (1 << 2) /* Abort on Cmd/Data Parity Err */
......@@ -151,7 +151,7 @@
#define CNTL2_DAE (1 << 7) /* Data Alignment Enable */
/* Configuration register 3 (read/write) */
#define REG_CNTL3(x) ((x)->scsi.io_port + (12 << (x)->scsi.io_shift))
#define REG_CNTL3 (12)
#define CNTL3_BS8 (1 << 0) /* Burst size 8 */
#define CNTL3_MDM (1 << 1) /* Modify DMA mode */
#define CNTL3_LBTM (1 << 2) /* Last Byte Transfer mode */
......@@ -162,14 +162,14 @@
#define CNTL3_ADIDCHK (1 << 7) /* Additional ID check */
/* High transfer count (read/write) */
#define REG_CTCH(x) ((x)->scsi.io_port + (14 << (x)->scsi.io_shift))
#define REG_STCH(x) ((x)->scsi.io_port + (14 << (x)->scsi.io_shift))
#define REG_CTCH (14)
#define REG_STCH (14)
/* ID reigster (read only) */
#define REG1_ID(x) ((x)->scsi.io_port + (14 << (x)->scsi.io_shift))
/* ID register (read only) */
#define REG_ID (14)
/* Data alignment */
#define REG0_DAL(x) ((x)->scsi.io_port + (15 << (x)->scsi.io_shift))
#define REG_DAL (15)
typedef enum {
PHASE_IDLE, /* we're not planning on doing anything */
......@@ -212,6 +212,9 @@ typedef enum {
#define MAGIC 0x441296bdUL
#define NR_MSGS 8
#define FASCAP_DMA (1 << 0)
#define FASCAP_PSEUDODMA (1 << 1)
typedef struct {
unsigned long magic_start;
spinlock_t host_lock;
......@@ -233,12 +236,13 @@ typedef struct {
/* driver information */
struct {
phase_t phase; /* current phase */
void *io_base; /* iomem base of FAS216 */
unsigned int io_port; /* base address of FAS216 */
unsigned int io_shift; /* shift to adjust reg offsets by */
unsigned int irq; /* interrupt */
unsigned char cfg[4]; /* configuration registers */
const char *type; /* chip type */
phase_t phase; /* current phase */
unsigned int irq; /* interrupt */
struct {
unsigned char target; /* reconnected target */
......@@ -253,7 +257,6 @@ typedef struct {
unsigned int async_stp; /* Async transfer STP value */
unsigned char msgin_fifo; /* bytes in fifo at time of message in */
unsigned char message[256]; /* last message received from device */
unsigned int msglen; /* length of last message received */
unsigned char disconnectable:1; /* this command can be disconnected */
unsigned char aborting:1; /* aborting command */
......@@ -281,6 +284,7 @@ typedef struct {
unsigned char wide_max_size; /* Maximum wide transfer size */
unsigned char cntl3; /* Control Reg 3 */
unsigned int asyncperiod; /* Async transfer period (ns) */
unsigned int capabilities; /* driver capabilities */
unsigned int disconnect_ok:1; /* Disconnects allowed? */
} ifcfg;
......@@ -319,26 +323,18 @@ typedef struct {
} FAS216_Info;
/* Function: int fas216_init (struct Scsi_Host *instance)
* Purpose : initialise FAS/NCR/AMD SCSI ic.
* Purpose : initialise FAS/NCR/AMD SCSI structures.
* Params : instance - a driver-specific filled-out structure
* Returns : 0 on success
*/
extern int fas216_init (struct Scsi_Host *instance);
/* Function: int fas216_abort (Scsi_Cmnd *SCpnt)
* Purpose : abort a command if something horrible happens.
* Params : SCpnt - Command that is believed to be causing a problem.
* Returns : one of SCSI_ABORT_ macros.
*/
extern int fas216_abort (Scsi_Cmnd *);
/* Function: int fas216_reset (Scsi_Cmnd *SCpnt, unsigned int reset_flags)
* Purpose : resets the adapter if something horrible happens.
* Params : SCpnt - Command that is believed to be causing a problem.
* reset_flags - flags indicating reset type that is believed to be required.
* Returns : one of SCSI_RESET_ macros, or'd with the SCSI_RESET_*_RESET macros.
/* Function: int fas216_add (struct Scsi_Host *instance, struct device *dev)
* Purpose : initialise FAS/NCR/AMD SCSI ic.
* Params : instance - a driver-specific filled-out structure
* Returns : 0 on success
*/
extern int fas216_reset (Scsi_Cmnd *, unsigned int);
extern int fas216_add (struct Scsi_Host *instance, struct device *dev);
/* Function: int fas216_queue_command (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
* Purpose : queue a command for adapter to process.
......@@ -355,20 +351,21 @@ extern int fas216_queue_command (Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
*/
extern int fas216_command (Scsi_Cmnd *);
/* Function: void fas216_intr (struct Scsi_Host *instance)
/* Function: void fas216_intr (FAS216_Info *info)
* Purpose : handle interrupts from the interface to progress a command
* Params : instance - interface to service
* Params : info - interface to service
*/
extern void fas216_intr (struct Scsi_Host *instance);
extern void fas216_intr (FAS216_Info *info);
extern void fas216_remove (struct Scsi_Host *instance);
/* Function: int fas216_release (struct Scsi_Host *instance)
/* Function: void fas216_release (struct Scsi_Host *instance)
* Purpose : release all resources and put everything to bed for FAS/NCR/AMD SCSI ic.
* Params : instance - a driver-specific filled-out structure
* Returns : 0 on success
*/
extern int fas216_release (struct Scsi_Host *instance);
extern void fas216_release (struct Scsi_Host *instance);
extern int fas216_info(FAS216_Info *info, char *buffer);
extern int fas216_print_host(FAS216_Info *info, char *buffer);
extern int fas216_print_stats(FAS216_Info *info, char *buffer);
extern int fas216_print_device(FAS216_Info *info, Scsi_Device *scd, char *buffer);
......
......@@ -192,7 +192,8 @@ static struct ecard_driver oakscsi_driver = {
.remove = __devexit_p(oakscsi_remove),
.id_table = oakscsi_cids,
.drv = {
.name = "oakscsi",
.devclass = &shost_devclass,
.name = "oakscsi",
},
};
......
This diff is collapsed.
......@@ -55,8 +55,6 @@ static inline unsigned char get_next_SCp_byte(Scsi_Pointer *SCp)
SCp->ptr += 1;
SCp->this_residual -= 1;
if (SCp->this_residual == 0)
next_SCp(SCp);
return c;
}
......@@ -66,8 +64,6 @@ static inline void put_next_SCp_byte(Scsi_Pointer *SCp, unsigned char c)
*SCp->ptr = c;
SCp->ptr += 1;
SCp->this_residual -= 1;
if (SCp->this_residual == 0)
next_SCp(SCp);
}
static inline void init_SCp(Scsi_Cmnd *SCpnt)
......@@ -112,7 +108,7 @@ static inline void init_SCp(Scsi_Cmnd *SCpnt)
* we aren't interested in the buffer pointer.
*/
if (SCpnt->SCp.this_residual == 0 && SCpnt->SCp.ptr) {
#ifdef BELT_AND_BRACES
#if 0 //def BELT_AND_BRACES
printk(KERN_WARNING "scsi%d.%c: zero length buffer passed for "
"command ", SCpnt->host->host_no, '0' + SCpnt->target);
print_command(SCpnt->cmnd);
......
......@@ -2911,7 +2911,11 @@ static void redo_fd_request(void)
for (;;) {
if (!current_req) {
struct request *req = elv_next_request(&floppy_queue);
struct request *req;
spin_lock_irq(floppy_queue.queue_lock);
req = elv_next_request(&floppy_queue);
spin_unlock_irq(floppy_queue.queue_lock);
if (!req) {
do_floppy = NULL;
unlock_fdc();
......
......@@ -88,7 +88,7 @@ static int __init rpcmouse_init(void)
input_register_device(&rpcmouse_dev);
printk(KERN_INFO "input: Acorn RiscPC mouse irq %d", IRQ_VSYNCPULSE);
printk(KERN_INFO "input: Acorn RiscPC mouse\n");
return 0;
}
......
......@@ -512,6 +512,37 @@ static void h3xxx_set_vpp(struct map_info *map, int vpp)
#define h3xxx_set_vpp NULL
#endif
#ifdef CONFIG_SA1100_HACKKIT
static struct mtd_partition hackkit_partitions[] = {
{
.name = "BLOB",
.size = 0x00040000,
.offset = 0x00000000,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "config",
.size = 0x00040000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "kernel",
.size = 0x00100000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "initrd",
.size = 0x00180000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "rootfs",
.size = 0x700000,
.offset = MTDPART_OFS_APPEND,
}, {
.name = "data",
.size = MTDPART_SIZ_FULL,
.offset = MTDPART_OFS_APPEND,
}
};
#endif
#ifdef CONFIG_SA1100_HUW_WEBPANEL
static struct mtd_partition huw_webpanel_partitions[] = {
{
......@@ -849,6 +880,12 @@ static int __init sa1100_static_partitions(struct mtd_partition **parts)
nb_parts = ARRAY_SIZE(h3xxx_partitions);
}
#endif
#ifdef CONFIG_SA1100_HACKKIT
if (machine_is_hackkit()) {
*parts = hackkit_partitions;
nb_parts = ARRAY_SIZE(hackkit_partitions);
}
#endif
#ifdef CONFIG_SA1100_HUW_WEBPANEL
if (machine_is_huw_webpanel()) {
*parts = huw_webpanel_partitions;
......
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment