Commit 018b171c authored by Juuso Oikarinen's avatar Juuso Oikarinen Committed by John W. Linville

wl1271: Remove smart reflex ACX

Remove the smart-reflex ACX - the associated parameters are now configured
in the radio parameters config.
Signed-off-by: default avatarJuuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: default avatarLuciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: default avatarLuciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
parent 149e3878
......@@ -1041,59 +1041,6 @@ int wl1271_acx_init_rx_interrupt(struct wl1271 *wl)
return ret;
}
int wl1271_acx_smart_reflex(struct wl1271 *wl)
{
struct acx_smart_reflex_state *sr_state = NULL;
struct acx_smart_reflex_config_params *sr_param = NULL;
int i, ret;
wl1271_debug(DEBUG_ACX, "acx smart reflex");
sr_param = kzalloc(sizeof(*sr_param), GFP_KERNEL);
if (!sr_param) {
ret = -ENOMEM;
goto out;
}
for (i = 0; i < CONF_SR_ERR_TBL_COUNT; i++) {
struct conf_mart_reflex_err_table *e =
&(wl->conf.init.sr_err_tbl[i]);
sr_param->error_table[i].len = e->len;
sr_param->error_table[i].upper_limit = e->upper_limit;
memcpy(sr_param->error_table[i].values, e->values, e->len);
}
ret = wl1271_cmd_configure(wl, ACX_SET_SMART_REFLEX_PARAMS,
sr_param, sizeof(*sr_param));
if (ret < 0) {
wl1271_warning("failed to set smart reflex params: %d", ret);
goto out;
}
sr_state = kzalloc(sizeof(*sr_state), GFP_KERNEL);
if (!sr_state) {
ret = -ENOMEM;
goto out;
}
/* enable smart reflex */
sr_state->enable = wl->conf.init.sr_enable;
ret = wl1271_cmd_configure(wl, ACX_SET_SMART_REFLEX_STATE,
sr_state, sizeof(*sr_state));
if (ret < 0) {
wl1271_warning("failed to set smart reflex params: %d", ret);
goto out;
}
out:
kfree(sr_state);
kfree(sr_param);
return ret;
}
int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable)
{
struct wl1271_acx_bet_enable *acx = NULL;
......
......@@ -415,25 +415,6 @@ struct acx_bt_wlan_coex {
u8 pad[3];
} __attribute__ ((packed));
struct acx_smart_reflex_state {
struct acx_header header;
u8 enable;
u8 padding[3];
} __attribute__ ((packed));
struct smart_reflex_err_table {
u8 len;
s8 upper_limit;
s8 values[14];
} __attribute__ ((packed));
struct acx_smart_reflex_config_params {
struct acx_header header;
struct smart_reflex_err_table error_table[3];
} __attribute__ ((packed));
struct acx_dco_itrim_params {
struct acx_header header;
......@@ -1035,8 +1016,6 @@ enum {
ACX_HT_BSS_OPERATION = 0x0058,
ACX_COEX_ACTIVITY = 0x0059,
ACX_SET_SMART_REFLEX_DEBUG = 0x005A,
ACX_SET_SMART_REFLEX_STATE = 0x005B,
ACX_SET_SMART_REFLEX_PARAMS = 0x005F,
ACX_SET_DCO_ITRIM_PARAMS = 0x0061,
DOT11_RX_MSDU_LIFE_TIME = 0x1004,
DOT11_CUR_TX_PWR = 0x100D,
......
......@@ -722,31 +722,6 @@ struct conf_conn_settings {
u8 psm_entry_retries;
};
#define CONF_SR_ERR_TBL_MAX_VALUES 14
struct conf_mart_reflex_err_table {
/*
* Length of the error table values table.
*
* Range: 0 - CONF_SR_ERR_TBL_MAX_VALUES
*/
u8 len;
/*
* Smart Reflex error table upper limit.
*
* Range: s8
*/
s8 upper_limit;
/*
* Smart Reflex error table values.
*
* Range: s8
*/
s8 values[CONF_SR_ERR_TBL_MAX_VALUES];
};
enum {
CONF_REF_CLK_19_2_E,
CONF_REF_CLK_26_E,
......@@ -907,21 +882,7 @@ struct conf_radio_parms {
u8 degraded_normal_to_high_threshold_5;
};
#define CONF_SR_ERR_TBL_COUNT 3
struct conf_init_settings {
/*
* Configure Smart Reflex error table values.
*/
struct conf_mart_reflex_err_table sr_err_tbl[CONF_SR_ERR_TBL_COUNT];
/*
* Smart Reflex enable flag.
*
* Range: 1 - Smart Reflex enabled, 0 - Smart Reflex disabled
*/
u8 sr_enable;
/*
* Configure general parameters.
*/
......
......@@ -303,11 +303,6 @@ int wl1271_hw_init(struct wl1271 *wl)
if (ret < 0)
goto out_free_memmap;
/* Configure smart reflex */
ret = wl1271_acx_smart_reflex(wl);
if (ret < 0)
goto out_free_memmap;
return 0;
out_free_memmap:
......
......@@ -226,30 +226,6 @@ static struct conf_drv_settings default_conf = {
.psm_entry_retries = 3
},
.init = {
.sr_err_tbl = {
[0] = {
.len = 7,
.upper_limit = 0x03,
.values = {
0x18, 0x10, 0x05, 0xfb, 0xf0, 0xe8,
0x00 }
},
[1] = {
.len = 7,
.upper_limit = 0x03,
.values = {
0x18, 0x10, 0x05, 0xf6, 0xf0, 0xe8,
0x00 }
},
[2] = {
.len = 7,
.upper_limit = 0x03,
.values = {
0x18, 0x10, 0x05, 0xfb, 0xf0, 0xe8,
0x00 }
}
},
.sr_enable = 1,
.genparam = {
.ref_clk = CONF_REF_CLK_38_4_E,
.settling_time = 5,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment