irqchip: gic-v3: Initial support for GICv3

The Generic Interrupt Controller (version 3) offers services that are
similar to GICv2, with a number of additional features:
- Affinity routing based on the CPU MPIDR (ARE)
- System register for the CPU interfaces (SRE)
- Support for more that 8 CPUs
- Locality-specific Peripheral Interrupts (LPIs)
- Interrupt Translation Services (ITS)

This patch adds preliminary support for GICv3 with ARE and SRE,
non-secure mode only. It relies on higher exception levels to grant ARE
and SRE access.

Support for LPI and ITS will be added at a later time.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Reviewed-by: Zi Shen Lim <zlim@broadcom.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Tirumalesh Chalamarla <tchalamarla@cavium.com>
Reviewed-by: Yun Wu <wuyun.wu@huawei.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Tested-by: Tirumalesh Chalamarla<tchalamarla@cavium.com>
Tested-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
Acked-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/1404140510-5382-3-git-send-email-marc.zyngier@arm.comSigned-off-by: Jason Cooper <jason@lakedaemon.net>

arch/arm64/Kconfig

@@ -9,6 +9,7 @@ config ARM64
 	select ARM_AMBA
 	select ARM_ARCH_TIMER
 	select ARM_GIC
+	select ARM_GIC_V3
 	select BUILDTIME_EXTABLE_SORT
 	select CLONE_BACKWARDS
 	select COMMON_CLK

arch/arm64/kernel/head.S

@@ -22,6 +22,7 @@
 
 #include <linux/linkage.h>
 #include <linux/init.h>
+#include <linux/irqchip/arm-gic-v3.h>
 
 #include <asm/assembler.h>
 #include <asm/ptrace.h>
@@ -296,6 +297,23 @@ CPU_LE(	bic	x0, x0, #(3 << 24)	)	// Clear the EE and E0E bits for EL1
 	msr	cnthctl_el2, x0
 	msr	cntvoff_el2, xzr		// Clear virtual offset
 
+#ifdef CONFIG_ARM_GIC_V3
+	/* GICv3 system register access */
+	mrs	x0, id_aa64pfr0_el1
+	ubfx	x0, x0, #24, #4
+	cmp	x0, #1
+	b.ne	3f
+
+	mrs	x0, ICC_SRE_EL2
+	orr	x0, x0, #ICC_SRE_EL2_SRE	// Set ICC_SRE_EL2.SRE==1
+	orr	x0, x0, #ICC_SRE_EL2_ENABLE	// Set ICC_SRE_EL2.Enable==1
+	msr	ICC_SRE_EL2, x0
+	isb					// Make sure SRE is now set
+	msr	ICH_HCR_EL2, xzr		// Reset ICC_HCR_EL2 to defaults
+
+3:
+#endif
+
 	/* Populate ID registers. */
 	mrs	x0, midr_el1
 	mrs	x1, mpidr_el1

arch/arm64/kernel/hyp-stub.S

@@ -19,6 +19,7 @@
 
 #include <linux/init.h>
 #include <linux/linkage.h>
+#include <linux/irqchip/arm-gic-v3.h>
 
 #include <asm/assembler.h>
 #include <asm/ptrace.h>

drivers/irqchip/Kconfig

@@ -10,6 +10,11 @@ config ARM_GIC
 config GIC_NON_BANKED
 	bool
 
+config ARM_GIC_V3
+	bool
+	select IRQ_DOMAIN
+	select MULTI_IRQ_HANDLER
+
 config ARM_NVIC
 	bool
 	select IRQ_DOMAIN

drivers/irqchip/Makefile

@@ -16,6 +16,7 @@ obj-$(CONFIG_ARCH_SUNXI)		+= irq-sun4i.o
 obj-$(CONFIG_ARCH_SUNXI)		+= irq-sunxi-nmi.o
 obj-$(CONFIG_ARCH_SPEAR3XX)		+= spear-shirq.o
 obj-$(CONFIG_ARM_GIC)			+= irq-gic.o irq-gic-common.o
+obj-$(CONFIG_ARM_GIC_V3)		+= irq-gic-v3.o irq-gic-common.o
 obj-$(CONFIG_ARM_NVIC)			+= irq-nvic.o
 obj-$(CONFIG_ARM_VIC)			+= irq-vic.o
 obj-$(CONFIG_IMGPDC_IRQ)		+= irq-imgpdc.o

include/linux/irqchip/arm-gic-v3.h

+/*
+ * Copyright (C) 2013, 2014 ARM Limited, All Rights Reserved.
+ * Author: Marc Zyngier <marc.zyngier@arm.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __LINUX_IRQCHIP_ARM_GIC_V3_H
+#define __LINUX_IRQCHIP_ARM_GIC_V3_H
+
+/*
+ * Distributor registers. We assume we're running non-secure, with ARE
+ * being set. Secure-only and non-ARE registers are not described.
+ */
+#define GICD_CTLR			0x0000
+#define GICD_TYPER			0x0004
+#define GICD_IIDR			0x0008
+#define GICD_STATUSR			0x0010
+#define GICD_SETSPI_NSR			0x0040
+#define GICD_CLRSPI_NSR			0x0048
+#define GICD_SETSPI_SR			0x0050
+#define GICD_CLRSPI_SR			0x0058
+#define GICD_SEIR			0x0068
+#define GICD_ISENABLER			0x0100
+#define GICD_ICENABLER			0x0180
+#define GICD_ISPENDR			0x0200
+#define GICD_ICPENDR			0x0280
+#define GICD_ISACTIVER			0x0300
+#define GICD_ICACTIVER			0x0380
+#define GICD_IPRIORITYR			0x0400
+#define GICD_ICFGR			0x0C00
+#define GICD_IROUTER			0x6000
+#define GICD_PIDR2			0xFFE8
+
+#define GICD_CTLR_RWP			(1U << 31)
+#define GICD_CTLR_ARE_NS		(1U << 4)
+#define GICD_CTLR_ENABLE_G1A		(1U << 1)
+#define GICD_CTLR_ENABLE_G1		(1U << 0)
+
+#define GICD_IROUTER_SPI_MODE_ONE	(0U << 31)
+#define GICD_IROUTER_SPI_MODE_ANY	(1U << 31)
+
+#define GIC_PIDR2_ARCH_MASK		0xf0
+#define GIC_PIDR2_ARCH_GICv3		0x30
+#define GIC_PIDR2_ARCH_GICv4		0x40
+
+/*
+ * Re-Distributor registers, offsets from RD_base
+ */
+#define GICR_CTLR			GICD_CTLR
+#define GICR_IIDR			0x0004
+#define GICR_TYPER			0x0008
+#define GICR_STATUSR			GICD_STATUSR
+#define GICR_WAKER			0x0014
+#define GICR_SETLPIR			0x0040
+#define GICR_CLRLPIR			0x0048
+#define GICR_SEIR			GICD_SEIR
+#define GICR_PROPBASER			0x0070
+#define GICR_PENDBASER			0x0078
+#define GICR_INVLPIR			0x00A0
+#define GICR_INVALLR			0x00B0
+#define GICR_SYNCR			0x00C0
+#define GICR_MOVLPIR			0x0100
+#define GICR_MOVALLR			0x0110
+#define GICR_PIDR2			GICD_PIDR2
+
+#define GICR_WAKER_ProcessorSleep	(1U << 1)
+#define GICR_WAKER_ChildrenAsleep	(1U << 2)
+
+/*
+ * Re-Distributor registers, offsets from SGI_base
+ */
+#define GICR_ISENABLER0			GICD_ISENABLER
+#define GICR_ICENABLER0			GICD_ICENABLER
+#define GICR_ISPENDR0			GICD_ISPENDR
+#define GICR_ICPENDR0			GICD_ICPENDR
+#define GICR_ISACTIVER0			GICD_ISACTIVER
+#define GICR_ICACTIVER0			GICD_ICACTIVER
+#define GICR_IPRIORITYR0		GICD_IPRIORITYR
+#define GICR_ICFGR0			GICD_ICFGR
+
+#define GICR_TYPER_VLPIS		(1U << 1)
+#define GICR_TYPER_LAST			(1U << 4)
+
+/*
+ * CPU interface registers
+ */
+#define ICC_CTLR_EL1_EOImode_drop_dir	(0U << 1)
+#define ICC_CTLR_EL1_EOImode_drop	(1U << 1)
+#define ICC_SRE_EL1_SRE			(1U << 0)
+
+/*
+ * Hypervisor interface registers (SRE only)
+ */
+#define ICH_LR_VIRTUAL_ID_MASK		((1UL << 32) - 1)
+
+#define ICH_LR_EOI			(1UL << 41)
+#define ICH_LR_GROUP			(1UL << 60)
+#define ICH_LR_STATE			(3UL << 62)
+#define ICH_LR_PENDING_BIT		(1UL << 62)
+#define ICH_LR_ACTIVE_BIT		(1UL << 63)
+
+#define ICH_MISR_EOI			(1 << 0)
+#define ICH_MISR_U			(1 << 1)
+
+#define ICH_HCR_EN			(1 << 0)
+#define ICH_HCR_UIE			(1 << 1)
+
+#define ICH_VMCR_CTLR_SHIFT		0
+#define ICH_VMCR_CTLR_MASK		(0x21f << ICH_VMCR_CTLR_SHIFT)
+#define ICH_VMCR_BPR1_SHIFT		18
+#define ICH_VMCR_BPR1_MASK		(7 << ICH_VMCR_BPR1_SHIFT)
+#define ICH_VMCR_BPR0_SHIFT		21
+#define ICH_VMCR_BPR0_MASK		(7 << ICH_VMCR_BPR0_SHIFT)
+#define ICH_VMCR_PMR_SHIFT		24
+#define ICH_VMCR_PMR_MASK		(0xffUL << ICH_VMCR_PMR_SHIFT)
+
+#define ICC_EOIR1_EL1			S3_0_C12_C12_1
+#define ICC_IAR1_EL1			S3_0_C12_C12_0
+#define ICC_SGI1R_EL1			S3_0_C12_C11_5
+#define ICC_PMR_EL1			S3_0_C4_C6_0
+#define ICC_CTLR_EL1			S3_0_C12_C12_4
+#define ICC_SRE_EL1			S3_0_C12_C12_5
+#define ICC_GRPEN1_EL1			S3_0_C12_C12_7
+
+#define ICC_IAR1_EL1_SPURIOUS		0x3ff
+
+#define ICC_SRE_EL2			S3_4_C12_C9_5
+
+#define ICC_SRE_EL2_SRE			(1 << 0)
+#define ICC_SRE_EL2_ENABLE		(1 << 3)
+
+/*
+ * System register definitions
+ */
+#define ICH_VSEIR_EL2			S3_4_C12_C9_4
+#define ICH_HCR_EL2			S3_4_C12_C11_0
+#define ICH_VTR_EL2			S3_4_C12_C11_1
+#define ICH_MISR_EL2			S3_4_C12_C11_2
+#define ICH_EISR_EL2			S3_4_C12_C11_3
+#define ICH_ELSR_EL2			S3_4_C12_C11_5
+#define ICH_VMCR_EL2			S3_4_C12_C11_7
+
+#define __LR0_EL2(x)			S3_4_C12_C12_ ## x
+#define __LR8_EL2(x)			S3_4_C12_C13_ ## x
+
+#define ICH_LR0_EL2			__LR0_EL2(0)
+#define ICH_LR1_EL2			__LR0_EL2(1)
+#define ICH_LR2_EL2			__LR0_EL2(2)
+#define ICH_LR3_EL2			__LR0_EL2(3)
+#define ICH_LR4_EL2			__LR0_EL2(4)
+#define ICH_LR5_EL2			__LR0_EL2(5)
+#define ICH_LR6_EL2			__LR0_EL2(6)
+#define ICH_LR7_EL2			__LR0_EL2(7)
+#define ICH_LR8_EL2			__LR8_EL2(0)
+#define ICH_LR9_EL2			__LR8_EL2(1)
+#define ICH_LR10_EL2			__LR8_EL2(2)
+#define ICH_LR11_EL2			__LR8_EL2(3)
+#define ICH_LR12_EL2			__LR8_EL2(4)
+#define ICH_LR13_EL2			__LR8_EL2(5)
+#define ICH_LR14_EL2			__LR8_EL2(6)
+#define ICH_LR15_EL2			__LR8_EL2(7)
+
+#define __AP0Rx_EL2(x)			S3_4_C12_C8_ ## x
+#define ICH_AP0R0_EL2			__AP0Rx_EL2(0)
+#define ICH_AP0R1_EL2			__AP0Rx_EL2(1)
+#define ICH_AP0R2_EL2			__AP0Rx_EL2(2)
+#define ICH_AP0R3_EL2			__AP0Rx_EL2(3)
+
+#define __AP1Rx_EL2(x)			S3_4_C12_C9_ ## x
+#define ICH_AP1R0_EL2			__AP1Rx_EL2(0)
+#define ICH_AP1R1_EL2			__AP1Rx_EL2(1)
+#define ICH_AP1R2_EL2			__AP1Rx_EL2(2)
+#define ICH_AP1R3_EL2			__AP1Rx_EL2(3)
+
+#ifndef __ASSEMBLY__
+
+#include <linux/stringify.h>
+
+static inline void gic_write_eoir(u64 irq)
+{
+	asm volatile("msr " __stringify(ICC_EOIR1_EL1) ", %0" : : "r" (irq));
+	isb();
+}
+
+#endif
+
+#endif