Commit 024358ee authored by Eric Moore's avatar Eric Moore Committed by Linus Torvalds

[PATCH] mptsas: fix phy identifiers

This fixes handling of the phy identifiers in mptsas.
Signed-off-by: default avatarEric Moore <Eric.Moore@lsil.com>
[ split it a pre-2.6.14 portion from Eric's bigger patch ]
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent ac9b9c66
......@@ -257,8 +257,8 @@ static void mptsas_print_device_pg0(SasDevicePage0_t *pg0)
printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address));
printk("Target ID=0x%X\n", pg0->TargetID);
printk("Bus=0x%X\n", pg0->Bus);
printk("PhyNum=0x%X\n", pg0->PhyNum);
printk("AccessStatus=0x%X\n", le16_to_cpu(pg0->AccessStatus));
printk("Parent Phy Num=0x%X\n", pg0->PhyNum);
printk("Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus));
printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo));
printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags));
printk("Physical Port=0x%X\n", pg0->PhysicalPort);
......@@ -270,7 +270,7 @@ static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1)
printk("---- SAS EXPANDER PAGE 1 ------------\n");
printk("Physical Port=0x%X\n", pg1->PhysicalPort);
printk("PHY Identifier=0x%X\n", pg1->Phy);
printk("PHY Identifier=0x%X\n", pg1->PhyIdentifier);
printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate);
printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate);
printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate);
......@@ -604,7 +604,7 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info,
mptsas_print_expander_pg1(buffer);
/* save config data */
phy_info->phy_id = buffer->Phy;
phy_info->phy_id = buffer->PhyIdentifier;
phy_info->port_id = buffer->PhysicalPort;
phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate;
phy_info->programmed_link_rate = buffer->ProgrammedLinkRate;
......@@ -825,6 +825,8 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index)
mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify,
(MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE <<
MPI_SAS_DEVICE_PGAD_FORM_SHIFT), handle);
port_info->phy_info[i].identify.phy_id =
port_info->phy_info[i].phy_id;
handle = port_info->phy_info[i].identify.handle;
if (port_info->phy_info[i].attached.handle) {
......@@ -881,6 +883,8 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index)
(MPI_SAS_DEVICE_PGAD_FORM_HANDLE <<
MPI_SAS_DEVICE_PGAD_FORM_SHIFT),
port_info->phy_info[i].identify.handle);
port_info->phy_info[i].identify.phy_id =
port_info->phy_info[i].phy_id;
}
if (port_info->phy_info[i].attached.handle) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment