Remove GENERIC_HARDIRQ config option

After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

Remove GENERIC_HARDIRQ config option
After the last architecture switched to generic hard irqs the config options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code for !CONFIG_GENERIC_HARDIRQS can be removed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
0244ad00 · Martin Schwidefsky · 5a7d8a28 · 0244ad00 · 0244ad00 · 0244ad00
Commit 0244ad00 authored Aug 30, 2013 by Martin Schwidefsky
81 changed files
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -7,7 +7,6 @@ config ALPHA
 	select HAVE_PCSPKR_PLATFORM
 	select HAVE_PERF_EVENTS
 	select HAVE_DMA_ATTRS
-	select HAVE_GENERIC_HARDIRQS
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select AUTO_IRQ_AFFINITY if SMP

--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -20,7 +20,6 @@ config ARC
 	select GENERIC_SMP_IDLE_THREAD
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_IOREMAP_PROT
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES

--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -37,7 +37,6 @@ config ARM
 	select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
 	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_IRQ_TIME_ACCOUNTING

--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -23,7 +23,6 @@ config ARM64
 	select HAVE_DMA_API_DEBUG
 	select HAVE_DMA_ATTRS
 	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS
 	select HAVE_MEMBLOCK
 	select HAVE_PERF_EVENTS

--- a/arch/avr32/Kconfig
+++ b/arch/avr32/Kconfig
@@ -6,7 +6,6 @@ config AVR32
 	select HAVE_CLK
 	select HAVE_OPROFILE
 	select HAVE_KPROBES
-	select HAVE_GENERIC_HARDIRQS
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_ATOMIC64

--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -32,7 +32,6 @@ config BLACKFIN
 	select HAVE_UNDERSCORE_SYMBOL_PREFIX
 	select VIRT_TO_BUS
 	select ARCH_WANT_IPC_PARSE_VERSION
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_ATOMIC64
 	select GENERIC_IRQ_PROBE
 	select USE_GENERIC_SMP_HELPERS if SMP

--- a/arch/c6x/Kconfig
+++ b/arch/c6x/Kconfig
@@ -10,7 +10,6 @@ config C6X
 	select GENERIC_IRQ_SHOW
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_MEMBLOCK
 	select SPARSE_IRQ
 	select IRQ_DOMAIN

--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -41,7 +41,6 @@ config CRIS
 	default y
 	select HAVE_IDE
 	select GENERIC_ATOMIC64
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_UID16
 	select VIRT_TO_BUS
 	select ARCH_WANT_IPC_PARSE_VERSION

--- a/arch/frv/Kconfig
+++ b/arch/frv/Kconfig
@@ -5,7 +5,6 @@ config FRV
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_PERF_EVENTS
 	select HAVE_UID16
-	select HAVE_GENERIC_HARDIRQS
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_SHOW
 	select HAVE_DEBUG_BUGVERBOSE

--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -2,7 +2,6 @@ config H8300
 	bool
 	default y
 	select HAVE_IDE
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_ATOMIC64
 	select HAVE_UID16
 	select VIRT_TO_BUS

--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -15,7 +15,6 @@ config HEXAGON
 	# select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_ATOMIC64
 	select HAVE_PERF_EVENTS
-	select HAVE_GENERIC_HARDIRQS
 	# GENERIC_ALLOCATOR is used by dma_alloc_coherent()
 	select GENERIC_ALLOCATOR
 	select GENERIC_IRQ_SHOW

--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -21,7 +21,6 @@ config IA64
 	select HAVE_KVM
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_MEMBLOCK
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_VIRT_CPU_ACCOUNTING

--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -9,7 +9,6 @@ config M32R
 	select HAVE_KERNEL_LZMA
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HAVE_DEBUG_BUGVERBOSE
-	select HAVE_GENERIC_HARDIRQS
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW

--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -4,7 +4,6 @@ config M68K
 	select HAVE_IDE
 	select HAVE_AOUT if MMU
 	select HAVE_DEBUG_BUGVERBOSE
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
 	select GENERIC_ATOMIC64
 	select HAVE_UID16

--- a/arch/metag/Kconfig
+++ b/arch/metag/Kconfig
@@ -13,7 +13,6 @@ config METAG
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZO

--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -18,7 +18,6 @@ config MICROBLAZE
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HAVE_DEBUG_KMEMLEAK
 	select IRQ_DOMAIN
-	select HAVE_GENERIC_HARDIRQS
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW

--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -25,7 +25,6 @@ config MIPS
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select GENERIC_PCI_IOMAP

--- a/arch/mn10300/Kconfig
+++ b/arch/mn10300/Kconfig
 config MN10300
 	def_bool y
 	select HAVE_OPROFILE
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HAVE_ARCH_TRACEHOOK

--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -11,7 +11,6 @@ config OPENRISC
 	select HAVE_MEMBLOCK
 	select ARCH_REQUIRE_GPIOLIB
        select HAVE_ARCH_TRACEHOOK
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW

--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -14,7 +14,6 @@ config PARISC
 	select HAVE_PERF_EVENTS
 	select GENERIC_ATOMIC64 if !64BIT
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
-	select HAVE_GENERIC_HARDIRQS
 	select BROKEN_RODATA
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PCI_IOMAP

--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -114,7 +114,6 @@ config PPC
 	select HAVE_PERF_EVENTS
 	select HAVE_REGS_AND_STACK_ACCESS_API
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
-	select HAVE_GENERIC_HARDIRQS
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select SPARSE_IRQ
 	select IRQ_DOMAIN

--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -116,7 +116,6 @@ config S390
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_KERNEL_BZIP2
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZ4

--- a/arch/score/Kconfig
+++ b/arch/score/Kconfig
@@ -2,7 +2,6 @@ menu "Machine selection"

 config SCORE
       def_bool y
-       select HAVE_GENERIC_HARDIRQS
       select GENERIC_IRQ_SHOW
       select GENERIC_IOMAP
       select GENERIC_ATOMIC64

--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -26,7 +26,6 @@ config SUPERH
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HAVE_SYSCALL_TRACEPOINTS
 	select HAVE_REGS_AND_STACK_ACCESS_API
-	select HAVE_GENERIC_HARDIRQS
 	select MAY_HAVE_SPARSE_IRQ
 	select IRQ_FORCED_THREADING
 	select RTC_LIB

--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -26,7 +26,6 @@ config SPARC
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
 	select HAVE_ARCH_JUMP_LABEL
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select USE_GENERIC_SMP_HELPERS if SMP

--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -11,7 +11,6 @@ config TILE
 	select USE_GENERIC_SMP_HELPERS
 	select CC_OPTIMIZE_FOR_SIZE
 	select HAVE_DEBUG_KMEMLEAK
-	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_PENDING_IRQ if SMP
 	select GENERIC_IRQ_SHOW

--- a/arch/um/Kconfig.common
+++ b/arch/um/Kconfig.common
@@ -6,7 +6,6 @@ config DEFCONFIG_LIST
 config UML
 	bool
 	default y
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_UID16
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES

--- a/arch/um/defconfig
+++ b/arch/um/defconfig
@@ -129,12 +129,10 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_FHANDLE is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HAVE_GENERIC_HARDIRQS=y

 #
 # IRQ subsystem
 #
-CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_SHOW=y

 #

--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -2,7 +2,6 @@ config UNICORE32
 	def_bool y
 	select HAVE_MEMBLOCK
 	select HAVE_GENERIC_DMA_COHERENT
-	select HAVE_GENERIC_HARDIRQS
 	select HAVE_DMA_ATTRS
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_BZIP2

--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -82,7 +82,6 @@ config X86
 	select HAVE_USER_RETURN_NOTIFIER
 	select ARCH_BINFMT_ELF_RANDOMIZE_PIE
 	select HAVE_ARCH_JUMP_LABEL
-	select HAVE_GENERIC_HARDIRQS
 	select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
 	select SPARSE_IRQ
 	select GENERIC_FIND_FIRST_BIT

--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -7,7 +7,6 @@ config XTENSA
 	select HAVE_IDE
 	select GENERIC_ATOMIC64
 	select GENERIC_CLOCKEVENTS
-	select HAVE_GENERIC_HARDIRQS
 	select VIRT_TO_BUS
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CPU_DEVICES

--- a/arch/xtensa/configs/common_defconfig
+++ b/arch/xtensa/configs/common_defconfig
@@ -8,7 +8,6 @@ CONFIG_XTENSA=y
 # CONFIG_UID16 is not set
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_HAVE_DEC_LOCK=y
-CONFIG_GENERIC_HARDIRQS=y

 #
 # Code maturity level options

--- a/arch/xtensa/configs/iss_defconfig
+++ b/arch/xtensa/configs/iss_defconfig
@@ -9,7 +9,6 @@ CONFIG_XTENSA=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_NO_IOPORT=y

--- a/arch/xtensa/configs/s6105_defconfig
+++ b/arch/xtensa/configs/s6105_defconfig
@@ -9,7 +9,6 @@ CONFIG_XTENSA=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_HARDIRQS=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_NO_IOPORT=y

--- a/drivers/block/mtip32xx/Kconfig
+++ b/drivers/block/mtip32xx/Kconfig
@@ -4,6 +4,6 @@

 config BLK_DEV_PCIESSD_MTIP32XX
 	tristate "Block Device Driver for Micron PCIe SSDs"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	help
          This enables the block driver for Micron PCIe SSDs.
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -255,10 +255,7 @@
 #include <linux/fips.h>
 #include <linux/ptrace.h>
 #include <linux/kmemcheck.h>
-
-#ifdef CONFIG_GENERIC_HARDIRQS
-# include <linux/irq.h>
-#endif
+#include <linux/irq.h>

 #include <asm/processor.h>
 #include <asm/uaccess.h>

--- a/drivers/dma/dw/Kconfig
+++ b/drivers/dma/dw/Kconfig
@@ -4,7 +4,6 @@

 config DW_DMAC_CORE
 	tristate "Synopsys DesignWare AHB DMA support"
-	depends on GENERIC_HARDIRQS
 	select DMA_ENGINE

 config DW_DMAC

--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -322,7 +322,7 @@ config GPIO_ICH

 config GPIO_VX855
 	tristate "VIA VX855/VX875 GPIO"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select MFD_CORE
 	select MFD_VX855
 	help
@@ -396,7 +396,7 @@ config GPIO_MAX732X

 config GPIO_MAX732X_IRQ
 	bool "Interrupt controller support for MAX732x"
-	depends on GPIO_MAX732X=y && GENERIC_HARDIRQS
+	depends on GPIO_MAX732X=y
 	help
 	  Say yes here to enable the max732x to be used as an interrupt
 	  controller. It requires the driver to be built in the kernel.
@@ -661,7 +661,7 @@ config GPIO_TIMBERDALE

 config GPIO_RDC321X
 	tristate "RDC R-321x GPIO support"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select MFD_CORE
 	select MFD_RDC321X
 	help

--- a/drivers/hid/Kconfig
+++ b/drivers/hid/Kconfig
@@ -773,7 +773,7 @@ config HID_ZYDACRON

 config HID_SENSOR_HUB
 	tristate "HID Sensors framework support"
-	depends on HID && GENERIC_HARDIRQS
+	depends on HID
 	select MFD_CORE
 	default n
 	---help---

--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -75,7 +75,6 @@ config I2C_HELPER_AUTO

 config I2C_SMBUS
 	tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
-	depends on GENERIC_HARDIRQS
 	help
 	  Say Y here if you want support for SMBus extensions to the I2C
 	  specification. At the moment, the only supported extension is

--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -115,7 +115,7 @@ config I2C_I801

 config I2C_ISCH
 	tristate "Intel SCH SMBus 1.0"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select LPC_SCH
 	help
 	  Say Y here if you want to use SMBus controller on the Intel SCH
@@ -546,7 +546,6 @@ config I2C_NUC900

 config I2C_OCORES
 	tristate "OpenCores I2C Controller"
-	depends on GENERIC_HARDIRQS
 	help
 	  If you say yes to this option, support will be included for the
 	  OpenCores I2C controller. For details see
@@ -791,7 +790,7 @@ config I2C_DIOLAN_U2C

 config I2C_PARPORT
 	tristate "Parallel port adapter"
-	depends on PARPORT && GENERIC_HARDIRQS
+	depends on PARPORT
 	select I2C_ALGOBIT
 	select I2C_SMBUS
 	help
@@ -816,7 +815,6 @@ config I2C_PARPORT

 config I2C_PARPORT_LIGHT
 	tristate "Parallel port adapter (light)"
-	depends on GENERIC_HARDIRQS
 	select I2C_ALGOBIT
 	select I2C_SMBUS
 	help

--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -4,7 +4,6 @@

 menuconfig IIO
 	tristate "Industrial I/O support"
-	depends on GENERIC_HARDIRQS
 	help
 	  The industrial I/O subsystem provides a unified framework for
 	  drivers for many different types of embedded sensors using a

--- a/drivers/infiniband/hw/qib/Kconfig
+++ b/drivers/infiniband/hw/qib/Kconfig
@@ -8,7 +8,7 @@ config INFINIBAND_QIB

 config INFINIBAND_QIB_DCA
 	bool "QIB DCA support"
-	depends on INFINIBAND_QIB && DCA && SMP && GENERIC_HARDIRQS && !(INFINIBAND_QIB=y && DCA=m)
+	depends on INFINIBAND_QIB && DCA && SMP && !(INFINIBAND_QIB=y && DCA=m)
 	default y
 	---help---
 	Setting this enables DCA support on some Intel chip sets

--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -224,7 +224,7 @@ config KEYBOARD_TCA6416

 config KEYBOARD_TCA8418
 	tristate "TCA8418 Keypad Support"
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	select INPUT_MATRIXKMAP
 	help
 	  This driver implements basic keypad functionality
@@ -303,7 +303,7 @@ config KEYBOARD_HP7XX

 config KEYBOARD_LM8323
 	tristate "LM8323 keypad chip"
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	depends on LEDS_CLASS
 	help
 	  If you say yes here you get support for the National Semiconductor

--- a/drivers/input/serio/Kconfig
+++ b/drivers/input/serio/Kconfig
@@ -239,7 +239,6 @@ config SERIO_PS2MULT

 config SERIO_ARC_PS2
 	tristate "ARC PS/2 support"
-	depends on GENERIC_HARDIRQS
 	help
 	  Say Y here if you have an ARC FPGA platform with a PS/2
 	  controller in it.

--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -389,7 +389,7 @@ config TOUCHSCREEN_MCS5000

 config TOUCHSCREEN_MMS114
 	tristate "MELFAS MMS114 touchscreen"
-	depends on I2C && GENERIC_HARDIRQS
+	depends on I2C
 	help
 	  Say Y here if you have the MELFAS MMS114 touchscreen controller
 	  chip in your system.
@@ -845,7 +845,7 @@ config TOUCHSCREEN_TSC_SERIO

 config TOUCHSCREEN_TSC2005
        tristate "TSC2005 based touchscreens"
-        depends on SPI_MASTER && GENERIC_HARDIRQS
+        depends on SPI_MASTER
        help
          Say Y here if you have a TSC2005 based touchscreen.


--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -203,7 +203,7 @@ config VIDEO_SAMSUNG_EXYNOS_GSC

 config VIDEO_SH_VEU
 	tristate "SuperH VEU mem2mem video processing driver"
-	depends on VIDEO_DEV && VIDEO_V4L2 && GENERIC_HARDIRQS && HAS_DMA
+	depends on VIDEO_DEV && VIDEO_V4L2 && HAS_DMA
 	select VIDEOBUF2_DMA_CONTIG
 	select V4L2_MEM2MEM_DEV
 	help

--- a/drivers/media/radio/Kconfig
+++ b/drivers/media/radio/Kconfig
@@ -214,7 +214,7 @@ config RADIO_TIMBERDALE

 config RADIO_WL1273
 	tristate "Texas Instruments WL1273 I2C FM Radio"
-	depends on I2C && VIDEO_V4L2 && GENERIC_HARDIRQS
+	depends on I2C && VIDEO_V4L2
 	select MFD_CORE
 	select MFD_WL1273_CORE
 	select FW_LOADER

--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
--- a/drivers/misc/cb710/Kconfig
+++ b/drivers/misc/cb710/Kconfig
 config CB710_CORE
 	tristate "ENE CB710/720 Flash memory card reader support"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	help
 	  This option enables support for PCI ENE CB710/720 Flash memory card
 	  reader found in some laptops (ie. some versions of HP Compaq nx9500).

--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -487,7 +487,7 @@ config MMC_SDHI

 config MMC_CB710
 	tristate "ENE CB710 MMC/SD Interface support"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select CB710_CORE
 	help
 	  This option enables support for MMC/SD part of ENE CB710/720 Flash

--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -22,7 +22,7 @@ if NET_CADENCE

 config ARM_AT91_ETHER
 	tristate "AT91RM9200 Ethernet support"
-	depends on GENERIC_HARDIRQS && HAS_DMA
+	depends on HAS_DMA
 	select MACB
 	---help---
 	  If you wish to compile a kernel for the AT91RM9200 and enable

--- a/drivers/net/wireless/p54/Kconfig
+++ b/drivers/net/wireless/p54/Kconfig
@@ -41,7 +41,7 @@ config P54_PCI

 config P54_SPI
 	tristate "Prism54 SPI (stlc45xx) support"
-	depends on P54_COMMON && SPI_MASTER && GENERIC_HARDIRQS
+	depends on P54_COMMON && SPI_MASTER
 	---help---
 	  This driver is for stlc4550 or stlc4560 based wireless chips
 	  such as Nokia's N800/N810 Portable Internet Tablet.

--- a/drivers/net/wireless/ti/wl1251/Kconfig
+++ b/drivers/net/wireless/ti/wl1251/Kconfig
 menuconfig WL1251
 	tristate "TI wl1251 driver support"
-	depends on MAC80211 && GENERIC_HARDIRQS
+	depends on MAC80211
 	select FW_LOADER
 	select CRC7
 	---help---

--- a/drivers/net/wireless/ti/wlcore/Kconfig
+++ b/drivers/net/wireless/ti/wlcore/Kconfig
 config WLCORE
 	tristate "TI wlcore support"
-	depends on WL_TI && GENERIC_HARDIRQS && MAC80211
+	depends on WL_TI && MAC80211
 	select FW_LOADER
 	---help---
 	  This module contains the main code for TI WLAN chips.  It abstracts

--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -30,7 +30,6 @@ static int pci_msi_enable = 1;

 /* Arch hooks */

-#if defined(CONFIG_GENERIC_HARDIRQS)
 int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_chip *chip = dev->bus->msi;
@@ -67,21 +66,6 @@ int __weak arch_msi_check_device(struct pci_dev *dev, int nvec, int type)

 	return chip->check_device(chip, dev, nvec, type);
 }
-#else
-int __weak arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
-{
-	return -ENOSYS;
-}
-
-void __weak arch_teardown_msi_irq(unsigned int irq)
-{
-}
-
-int __weak arch_msi_check_device(struct pci_dev *dev, int nvec, int type)
-{
-	return 0;
-}
-#endif /* CONFIG_GENERIC_HARDIRQS */

 int __weak arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
 {
@@ -245,8 +229,6 @@ static void msix_mask_irq(struct msi_desc *desc, u32 flag)
 	desc->masked = __msix_mask_irq(desc, flag);
 }

-#ifdef CONFIG_GENERIC_HARDIRQS
-
 static void msi_set_mask_bit(struct irq_data *data, u32 flag)
 {
 	struct msi_desc *desc = irq_data_get_msi(data);
@@ -270,8 +252,6 @@ void unmask_msi_irq(struct irq_data *data)
 	msi_set_mask_bit(data, 0);
 }

-#endif /* CONFIG_GENERIC_HARDIRQS */
-
 void __read_msi_msg(struct msi_desc *entry, struct msi_msg *msg)
 {
 	BUG_ON(entry->dev->current_state != PCI_D0);
@@ -382,10 +362,8 @@ static void free_msi_irqs(struct pci_dev *dev)
 			nvec = entry->nvec_used;
 		else
 			nvec = 1 << entry->msi_attrib.multiple;
-#ifdef CONFIG_GENERIC_HARDIRQS
 		for (i = 0; i < nvec; i++)
 			BUG_ON(irq_has_action(entry->irq + i));
-#endif
 	}

 	arch_teardown_msi_irqs(dev);

--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -269,7 +269,6 @@ config CHARGER_ISP1704

 config CHARGER_MAX8903
 	tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
-	depends on GENERIC_HARDIRQS
 	help
 	  Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
 	  The driver supports controlling charger-enable and current-limit
@@ -370,7 +369,7 @@ config AB8500_BM

 config BATTERY_GOLDFISH
 	tristate "Goldfish battery driver"
-	depends on GENERIC_HARDIRQS && (GOLDFISH || COMPILE_TEST)
+	depends on GOLDFISH || COMPILE_TEST
 	help
 	  Say Y to enable support for the battery and AC power in the
 	  Goldfish emulator.

--- a/drivers/pps/clients/Kconfig
+++ b/drivers/pps/clients/Kconfig
@@ -31,7 +31,7 @@ config PPS_CLIENT_PARPORT

 config PPS_CLIENT_GPIO
 	tristate "PPS client using GPIO"
-	depends on PPS && GENERIC_HARDIRQS
+	depends on PPS
 	help
 	  If you say yes here you get support for a PPS source using
 	  GPIO. To be useful you must also register a platform device

--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -55,7 +55,6 @@ comment "SPI Master Controller Drivers"

 config SPI_ALTERA
 	tristate "Altera SPI Controller"
-	depends on GENERIC_HARDIRQS
 	select SPI_BITBANG
 	help
 	  This is the driver for the Altera SPI Controller.
@@ -358,7 +357,7 @@ config SPI_PXA2XX_DMA

 config SPI_PXA2XX
 	tristate "PXA2xx SSP SPI master"
-	depends on (ARCH_PXA || PCI || ACPI) && GENERIC_HARDIRQS
+	depends on (ARCH_PXA || PCI || ACPI)
 	select PXA_SSP if ARCH_PXA
 	help
 	  This enables using a PXA2xx or Sodaville SSP port as a SPI master

--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -5,7 +5,7 @@
 if TTY

 menu "Serial drivers"
-	depends on HAS_IOMEM && GENERIC_HARDIRQS
+	depends on HAS_IOMEM

 source "drivers/tty/serial/8250/Kconfig"


--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
 config USB_DWC3
 	tristate "DesignWare USB3 DRD Core Support"
-	depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA
+	depends on (USB || USB_GADGET) && HAS_DMA
 	depends on EXTCON
 	select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
 	help

--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -313,7 +313,7 @@ config USB_S3C_HSUDC

 config USB_MV_UDC
 	tristate "Marvell USB2.0 Device Controller"
-	depends on GENERIC_HARDIRQS && HAS_DMA
+	depends on HAS_DMA
 	help
 	  Marvell Socs (including PXA and MMP series) include a high speed
 	  USB2.0 OTG controller, which can be configured as high speed or
@@ -425,7 +425,7 @@ config USB_GOKU

 config USB_EG20T
 	tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	help
 	  This is a USB device driver for EG20T PCH.
 	  EG20T PCH is the platform controller hub that is used in Intel's

--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -278,7 +278,6 @@ endif # USB_EHCI_HCD

 config USB_OXU210HP_HCD
 	tristate "OXU210HP HCD support"
-	depends on GENERIC_HARDIRQS
 	---help---
 	  The OXU210HP is an USB host/OTG/device controller. Enable this
 	  option if your board has this chip. If unsure, say N.

--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -71,7 +71,6 @@ config USB_MUSB_DA8XX

 config USB_MUSB_TUSB6010
 	tristate "TUSB6010"
-	depends on GENERIC_HARDIRQS

 config USB_MUSB_OMAP2PLUS
 	tristate "OMAP2430 and onwards"

--- a/drivers/usb/renesas_usbhs/Kconfig
+++ b/drivers/usb/renesas_usbhs/Kconfig
@@ -4,7 +4,7 @@

 config USB_RENESAS_USBHS
 	tristate 'Renesas USBHS controller'
-	depends on USB_GADGET && GENERIC_HARDIRQS
+	depends on USB_GADGET
 	default n
 	help
 	  Renesas USBHS is a discrete USB host and peripheral controller chip

--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -42,7 +42,7 @@ config W1_MASTER_MXC

 config W1_MASTER_DS1WM
 	tristate "Maxim DS1WM 1-wire busmaster"
-	depends on W1 && GENERIC_HARDIRQS
+	depends on W1
 	help
 	  Say Y here to enable the DS1WM 1-wire driver, such as that
 	  in HP iPAQ devices like h5xxx, h2200, and ASIC3-based like

--- a/include/linux/cpu_rmap.h
+++ b/include/linux/cpu_rmap.h
@@ -52,8 +52,6 @@ static inline void *cpu_rmap_lookup_obj(struct cpu_rmap *rmap, unsigned int cpu)
 	return rmap->obj[rmap->near[cpu].index];
 }

-#ifdef CONFIG_GENERIC_HARDIRQS
-
 /**
 * alloc_irq_cpu_rmap - allocate CPU affinity reverse-map for IRQs
 * @size: Number of objects to be mapped
@@ -68,5 +66,4 @@ extern void free_irq_cpu_rmap(struct cpu_rmap *rmap);

 extern int irq_cpu_rmap_add(struct cpu_rmap *rmap, int irq);

-#endif
 #endif /* __LINUX_CPU_RMAP_H */
--- a/include/linux/hardirq.h
+++ b/include/linux/hardirq.h
@@ -7,11 +7,7 @@
 #include <linux/vtime.h>


-#if defined(CONFIG_SMP) || defined(CONFIG_GENERIC_HARDIRQS)
 extern void synchronize_irq(unsigned int irq);
-#else
-# define synchronize_irq(irq)	barrier()
-#endif

 #if defined(CONFIG_TINY_RCU)


--- a/include/linux/interrupt.h
+++ b/include/linux/interrupt.h
@@ -120,7 +120,6 @@ struct irqaction {

 extern irqreturn_t no_action(int cpl, void *dev_id);

-#ifdef CONFIG_GENERIC_HARDIRQS
 extern int __must_check
 request_threaded_irq(unsigned int irq, irq_handler_t handler,
 		     irq_handler_t thread_fn,
@@ -140,40 +139,6 @@ request_any_context_irq(unsigned int irq, irq_handler_t handler,
 extern int __must_check
 request_percpu_irq(unsigned int irq, irq_handler_t handler,
 		   const char *devname, void __percpu *percpu_dev_id);
-#else
-
-extern int __must_check
-request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags,
-	    const char *name, void *dev);
-
-/*
- * Special function to avoid ifdeffery in kernel/irq/devres.c which
- * gets magically built by GENERIC_HARDIRQS=n architectures (sparc,
- * m68k). I really love these $@%#!* obvious Makefile references:
- * ../../../kernel/irq/devres.o
- */
-static inline int __must_check
-request_threaded_irq(unsigned int irq, irq_handler_t handler,
-		     irq_handler_t thread_fn,
-		     unsigned long flags, const char *name, void *dev)
-{
-	return request_irq(irq, handler, flags, name, dev);
-}
-
-static inline int __must_check
-request_any_context_irq(unsigned int irq, irq_handler_t handler,
-			unsigned long flags, const char *name, void *dev_id)
-{
-	return request_irq(irq, handler, flags, name, dev_id);
-}
-
-static inline int __must_check
-request_percpu_irq(unsigned int irq, irq_handler_t handler,
-		   const char *devname, void __percpu *percpu_dev_id)
-{
-	return request_irq(irq, handler, 0, devname, percpu_dev_id);
-}
-#endif

 extern void free_irq(unsigned int, void *);
 extern void free_percpu_irq(unsigned int, void __percpu *);
@@ -221,7 +186,6 @@ extern void enable_irq(unsigned int irq);
 extern void enable_percpu_irq(unsigned int irq, unsigned int type);

 /* The following three functions are for the core kernel use only. */
-#ifdef CONFIG_GENERIC_HARDIRQS
 extern void suspend_device_irqs(void);
 extern void resume_device_irqs(void);
 #ifdef CONFIG_PM_SLEEP
@@ -229,13 +193,8 @@ extern int check_wakeup_irqs(void);
 #else
 static inline int check_wakeup_irqs(void) { return 0; }
 #endif
-#else
-static inline void suspend_device_irqs(void) { };
-static inline void resume_device_irqs(void) { };
-static inline int check_wakeup_irqs(void) { return 0; }
-#endif

-#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS)
+#if defined(CONFIG_SMP)

 extern cpumask_var_t irq_default_affinity;

@@ -287,9 +246,8 @@ static inline int irq_set_affinity_hint(unsigned int irq,
 {
 	return -EINVAL;
 }
-#endif /* CONFIG_SMP && CONFIG_GENERIC_HARDIRQS */
+#endif /* CONFIG_SMP */

-#ifdef CONFIG_GENERIC_HARDIRQS
 /*
 * Special lockdep variants of irq disabling/enabling.
 * These should be used for locking constructs that
@@ -354,33 +312,6 @@ static inline int disable_irq_wake(unsigned int irq)
 	return irq_set_irq_wake(irq, 0);
 }

-#else /* !CONFIG_GENERIC_HARDIRQS */
-/*
- * NOTE: non-genirq architectures, if they want to support the lock
- * validator need to define the methods below in their asm/irq.h
- * files, under an #ifdef CONFIG_LOCKDEP section.
- */
-#ifndef CONFIG_LOCKDEP
-#  define disable_irq_nosync_lockdep(irq)	disable_irq_nosync(irq)
-#  define disable_irq_nosync_lockdep_irqsave(irq, flags) \
-						disable_irq_nosync(irq)
-#  define disable_irq_lockdep(irq)		disable_irq(irq)
-#  define enable_irq_lockdep(irq)		enable_irq(irq)
-#  define enable_irq_lockdep_irqrestore(irq, flags) \
-						enable_irq(irq)
-# endif
-
-static inline int enable_irq_wake(unsigned int irq)
-{
-	return 0;
-}
-
-static inline int disable_irq_wake(unsigned int irq)
-{
-	return 0;
-}
-#endif /* CONFIG_GENERIC_HARDIRQS */
-

 #ifdef CONFIG_IRQ_FORCED_THREADING
 extern bool force_irqthreads;
@@ -655,7 +586,7 @@ void tasklet_hrtimer_cancel(struct tasklet_hrtimer *ttimer)
 * if more than one irq occurred.
 */

-#if defined(CONFIG_GENERIC_HARDIRQS) && !defined(CONFIG_GENERIC_IRQ_PROBE) 
+#if !defined(CONFIG_GENERIC_IRQ_PROBE) 
 static inline unsigned long probe_irq_on(void)
 {
 	return 0;

--- a/include/linux/irq.h
+++ b/include/linux/irq.h
@@ -382,8 +382,6 @@ extern void irq_cpu_online(void);
 extern void irq_cpu_offline(void);
 extern int __irq_set_affinity_locked(struct irq_data *data,  const struct cpumask *cpumask);

-#ifdef CONFIG_GENERIC_HARDIRQS
-
 #if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_PENDING_IRQ)
 void irq_move_irq(struct irq_data *data);
 void irq_move_masked_irq(struct irq_data *data);
@@ -802,11 +800,4 @@ static inline void irq_gc_lock(struct irq_chip_generic *gc) { }
 static inline void irq_gc_unlock(struct irq_chip_generic *gc) { }
 #endif

-#else /* !CONFIG_GENERIC_HARDIRQS */
-
-extern struct msi_desc *irq_get_msi_desc(unsigned int irq);
-extern int irq_set_msi_desc(unsigned int irq, struct msi_desc *entry);
-
-#endif /* CONFIG_GENERIC_HARDIRQS */
-
 #endif /* _LINUX_IRQ_H */
--- a/include/linux/irqdesc.h
+++ b/include/linux/irqdesc.h
@@ -76,8 +76,6 @@ struct irq_desc {
 extern struct irq_desc irq_desc[NR_IRQS];
 #endif

-#ifdef CONFIG_GENERIC_HARDIRQS
-
 static inline struct irq_data *irq_desc_get_irq_data(struct irq_desc *desc)
 {
 	return &desc->irq_data;
@@ -173,6 +171,5 @@ __irq_set_preflow_handler(unsigned int irq, irq_preflow_handler_t handler)
 	desc->preflow_handler = handler;
 }
 #endif
-#endif

 #endif
--- a/include/linux/irqnr.h
+++ b/include/linux/irqnr.h
@@ -4,23 +4,6 @@
 #include <uapi/linux/irqnr.h>


-#ifndef CONFIG_GENERIC_HARDIRQS
-#include <asm/irq.h>
-
-/*
- * Wrappers for non-genirq architectures:
- */
-#define nr_irqs			NR_IRQS
-#define irq_to_desc(irq)	(&irq_desc[irq])
-
-# define for_each_irq_desc(irq, desc)		\
-	for (irq = 0; irq < nr_irqs; irq++)
-
-# define for_each_irq_desc_reverse(irq, desc)                          \
-	for (irq = nr_irqs - 1; irq >= 0; irq--)
-
-#else /* CONFIG_GENERIC_HARDIRQS */
-
 extern int nr_irqs;
 extern struct irq_desc *irq_to_desc(unsigned int irq);
 unsigned int irq_get_next_irq(unsigned int offset);
@@ -50,8 +33,6 @@ unsigned int irq_get_next_irq(unsigned int offset);
 	for (irq = irq_get_next_irq(0); irq < nr_irqs;	\
 	     irq = irq_get_next_irq(irq + 1))

-#endif /* CONFIG_GENERIC_HARDIRQS */
-
 #define for_each_irq_nr(irq)                   \
       for (irq = 0; irq < nr_irqs; irq++)


--- a/include/linux/kernel_stat.h
+++ b/include/linux/kernel_stat.h
@@ -36,9 +36,6 @@ struct kernel_cpustat {
 };

 struct kernel_stat {
-#ifndef CONFIG_GENERIC_HARDIRQS
-       unsigned int irqs[NR_IRQS];
-#endif
 	unsigned long irqs_sum;
 	unsigned int softirqs[NR_SOFTIRQS];
 };
@@ -54,22 +51,6 @@ DECLARE_PER_CPU(struct kernel_cpustat, kernel_cpustat);

 extern unsigned long long nr_context_switches(void);

-#ifndef CONFIG_GENERIC_HARDIRQS
-
-struct irq_desc;
-
-static inline void kstat_incr_irqs_this_cpu(unsigned int irq,
-					    struct irq_desc *desc)
-{
-	__this_cpu_inc(kstat.irqs[irq]);
-	__this_cpu_inc(kstat.irqs_sum);
-}
-
-static inline unsigned int kstat_irqs_cpu(unsigned int irq, int cpu)
-{
-       return kstat_cpu(cpu).irqs[irq];
-}
-#else
 #include <linux/irq.h>
 extern unsigned int kstat_irqs_cpu(unsigned int irq, int cpu);

@@ -79,8 +60,6 @@ do {							\
 	__this_cpu_inc(kstat.irqs_sum);			\
 } while (0)

-#endif
-
 static inline void kstat_incr_softirqs_this_cpu(unsigned int irq)
 {
 	__this_cpu_inc(kstat.softirqs[irq]);
@@ -94,20 +73,7 @@ static inline unsigned int kstat_softirqs_cpu(unsigned int irq, int cpu)
 /*
 * Number of interrupts per specific IRQ source, since bootup
 */
-#ifndef CONFIG_GENERIC_HARDIRQS
-static inline unsigned int kstat_irqs(unsigned int irq)
-{
-	unsigned int sum = 0;
-	int cpu;
-
-	for_each_possible_cpu(cpu)
-		sum += kstat_irqs_cpu(irq, cpu);
-
-	return sum;
-}
-#else
 extern unsigned int kstat_irqs(unsigned int irq);
-#endif

 /*
 * Number of interrupts per cpu, since bootup

--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -26,6 +26,7 @@ obj-y += sched/
 obj-y += power/
 obj-y += printk/
 obj-y += cpu/
+obj-y += irq/

 obj-$(CONFIG_CHECKPOINT_RESTORE) += kcmp.o
 obj-$(CONFIG_FREEZER) += freezer.o
@@ -79,7 +80,6 @@ obj-$(CONFIG_KPROBES) += kprobes.o
 obj-$(CONFIG_KGDB) += debug/
 obj-$(CONFIG_DETECT_HUNG_TASK) += hung_task.o
 obj-$(CONFIG_LOCKUP_DETECTOR) += watchdog.o
-obj-$(CONFIG_GENERIC_HARDIRQS) += irq/
 obj-$(CONFIG_SECCOMP) += seccomp.o
 obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
 obj-$(CONFIG_TREE_RCU) += rcutree.o

--- a/kernel/irq/Kconfig
+++ b/kernel/irq/Kconfig
-# Select this to activate the generic irq options below
-config HAVE_GENERIC_HARDIRQS
-	bool
-
-if HAVE_GENERIC_HARDIRQS
 menu "IRQ subsystem"
-#
-# Interrupt subsystem related configuration options
-#
-config GENERIC_HARDIRQS
-       def_bool y
-
 # Options selectable by the architecture code

 # Make sparse irq Kconfig switch below available
@@ -84,4 +73,3 @@ config SPARSE_IRQ
 	  If you don't know what to do here, say N.

 endmenu
-endif
--- a/kernel/softirq.c
+++ b/kernel/softirq.c
@@ -876,7 +876,6 @@ int __init __weak early_irq_init(void)
 	return 0;
 }

-#ifdef CONFIG_GENERIC_HARDIRQS
 int __init __weak arch_probe_nr_irqs(void)
 {
 	return NR_IRQS_LEGACY;
@@ -886,4 +885,3 @@ int __init __weak arch_early_irq_init(void)
 {
 	return 0;
 }
-#endif
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -597,7 +597,7 @@ endmenu # "Memory Debugging"

 config DEBUG_SHIRQ
 	bool "Debug shared IRQ handlers"
-	depends on DEBUG_KERNEL && GENERIC_HARDIRQS
+	depends on DEBUG_KERNEL
 	help
 	  Enable this to generate a spurious interrupt as soon as a shared
 	  interrupt handler is registered, and just before one is deregistered.

--- a/lib/cpu_rmap.c
+++ b/lib/cpu_rmap.c
@@ -8,9 +8,7 @@
 */

 #include <linux/cpu_rmap.h>
-#ifdef CONFIG_GENERIC_HARDIRQS
 #include <linux/interrupt.h>
-#endif
 #include <linux/export.h>

 /*
@@ -213,8 +211,6 @@ int cpu_rmap_update(struct cpu_rmap *rmap, u16 index,
 }
 EXPORT_SYMBOL(cpu_rmap_update);

-#ifdef CONFIG_GENERIC_HARDIRQS
-
 /* Glue between IRQ affinity notifiers and CPU rmaps */

 struct irq_glue {
@@ -309,5 +305,3 @@ int irq_cpu_rmap_add(struct cpu_rmap *rmap, int irq)
 	return rc;
 }
 EXPORT_SYMBOL(irq_cpu_rmap_add);
-
-#endif /* CONFIG_GENERIC_HARDIRQS */
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -228,7 +228,7 @@ config RPS

 config RFS_ACCEL
 	boolean
-	depends on RPS && GENERIC_HARDIRQS
+	depends on RPS
 	select CPU_RMAP
 	default y


--- a/sound/soc/codecs/Kconfig
+++ b/sound/soc/codecs/Kconfig
@@ -107,7 +107,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_WM8782
 	select SND_SOC_WM8804 if SND_SOC_I2C_AND_SPI
 	select SND_SOC_WM8900 if I2C
-	select SND_SOC_WM8903 if I2C && GENERIC_HARDIRQS
+	select SND_SOC_WM8903 if I2C
 	select SND_SOC_WM8904 if I2C
 	select SND_SOC_WM8940 if I2C
 	select SND_SOC_WM8955 if I2C

--- a/sound/soc/samsung/Kconfig
+++ b/sound/soc/samsung/Kconfig
@@ -63,7 +63,7 @@ config SND_SOC_SAMSUNG_SMDK_WM8580
 config SND_SOC_SAMSUNG_SMDK_WM8994
 	tristate "SoC I2S Audio support for WM8994 on SMDK"
 	depends on SND_SOC_SAMSUNG
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_WM8994
 	select SND_SOC_WM8994
 	select SND_SAMSUNG_I2S
@@ -151,7 +151,7 @@ config SND_SOC_SMARTQ
 config SND_SOC_GONI_AQUILA_WM8994
 	tristate "SoC I2S Audio support for AQUILA/GONI - WM8994"
 	depends on SND_SOC_SAMSUNG && (MACH_GONI || MACH_AQUILA)
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select SND_SAMSUNG_I2S
 	select MFD_WM8994
 	select SND_SOC_WM8994
@@ -177,7 +177,7 @@ config SND_SOC_SMDK_WM8580_PCM
 config SND_SOC_SMDK_WM8994_PCM
 	tristate "SoC PCM Audio support for WM8994 on SMDK"
 	depends on SND_SOC_SAMSUNG
-	depends on I2C=y && GENERIC_HARDIRQS
+	depends on I2C=y
 	select MFD_WM8994
 	select SND_SOC_WM8994
 	select SND_SAMSUNG_PCM