Skip to content

L
linux
Commit 0258b15d authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'qcom-dt-for-4.2' of... 

Merge tag 'qcom-dt-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into next/dt

Merge "Qualcomm ARM Based Device Tree Updates for v4.2" from Kumar Gala:

* Added support for regulators, USB Host & OTG, SATA, and i2c
  controllers on APQ8064 based platforms
* Added PM8841/PM8941/PMA8084 device nodes
* Added PMU support on MSM8660

* tag 'qcom-dt-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
  ARM: dts: qcom: Add msm8660 PMU node
  ARM: dts: qcom: Add PMA8084 functions device nodes
  ARM: dts: qcom: Add PM8941 functions device nodes
  ARM: dts: qcom: Add PM8841 functions device nodes
  ARM: dts: qcom: apq8064 - add i2c3 node for panel.
  ARM: dts: qcom: apq8064 - Move i2c1 pinctrl to apq8064.dtsi
  ARM: dts: qcom: apq8064-ifc6410 - Add DT alias for serial port
  ARM: dts: qcom: apq8064 - Add USB OTG support for CM QS-600
  ARM: dts: qcom: apq8064 - Add usb host support to CM QS-600
  ARM: dts: qcom: apq8064-cm-qs600 - Add basic regulators
  ARM: dts: qcom: apq8064 - Add SATA controller support
  ARM: dts: qcom: apq8064 - Add USB OTG support
  ARM: dts: qcom: apq8064 - Add usb host support.
  ARM: dts: qcom: apq8064-ifc6410 - Add basic regulators
  ARM: dts: qcom: apq8064 - add RPM regulators support
parents 542459e7 b73b3157
Hide whitespace changes
Inline Side-by-side
Showing with 649 additions and 10 deletions
arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
View file @ 0258b15d
......@@ -14,6 +14,67 @@ mux {
};
};
rpm@108000 {
regulators {
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs2-supply = <&pm8921_s1>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
vdd_l26-supply = <&pm8921_s7>;
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
/* Buck SMPS */
pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
pm8921_s3: s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
pm8921_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
pm8921_s7: s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
pm8921_l3: l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
pm8921_l4: l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
pm8921_l23: l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
};
};
gsbi@12440000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
......@@ -40,6 +101,45 @@ serial@16640000 {
};
};
/* OTG */
usb1_phy: phy@12500000 {
status = "okay";
vddcx-supply = <&pm8921_s3>;
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
};
usb3_phy: phy@12520000 {
status = "okay";
vddcx-supply = <&pm8921_s3>;
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l23>;
};
usb4_phy: phy@12530000 {
status = "okay";
vddcx-supply = <&pm8921_s3>;
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l23>;
};
gadget1: gadget@12500000 {
status = "ok";
};
/* OTG */
usb1: usb@12500000 {
status = "ok";
};
usb3: usb@12520000 {
status = "okay";
};
usb4: usb@12530000 {
status = "okay";
};
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
......
arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
View file @ 0258b15d
......@@ -5,15 +5,12 @@ / {
model = "Qualcomm APQ8064/IFC6410";
compatible = "qcom,apq8064-ifc6410", "qcom,apq8064";
aliases {
serial0 = &gsbi7_serial;
};
soc {
pinctrl@800000 {
i2c1_pins: i2c1 {
mux {
pins = "gpio20", "gpio21";
function = "gsbi1";
};
};
card_detect: card_detect {
mux {
pins = "gpio26";
......@@ -23,6 +20,83 @@ mux {
};
};
rpm@108000 {
regulators {
vin_lvs1_3_6-supply = <&pm8921_s4>;
vin_lvs2-supply = <&pm8921_s1>;
vin_lvs4_5_7-supply = <&pm8921_s4>;
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
vdd_l24-supply = <&pm8921_s1>;
vdd_l25-supply = <&pm8921_s1>;
vdd_l26-supply = <&pm8921_s7>;
vdd_l27-supply = <&pm8921_s7>;
vdd_l28-supply = <&pm8921_s7>;
/* Buck SMPS */
pm8921_s1: s1 {
regulator-always-on;
regulator-min-microvolt = <1225000>;
regulator-max-microvolt = <1225000>;
qcom,switch-mode-frequency = <3200000>;
bias-pull-down;
};
pm8921_s3: s3 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
qcom,switch-mode-frequency = <4800000>;
};
pm8921_s4: s4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
qcom,switch-mode-frequency = <3200000>;
};
pm8921_s7: s7 {
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
qcom,switch-mode-frequency = <3200000>;
};
pm8921_l3: l3 {
regulator-min-microvolt = <3050000>;
regulator-max-microvolt = <3300000>;
bias-pull-down;
};
pm8921_l4: l4 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
bias-pull-down;
};
pm8921_l6: l6 {
regulator-min-microvolt = <2950000>;
regulator-max-microvolt = <2950000>;
bias-pull-down;
};
pm8921_l23: l23 {
regulator-min-microvolt = <1700000>;
regulator-max-microvolt = <1900000>;
bias-pull-down;
};
};
};
gsbi3: gsbi@16200000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
i2c3: i2c@16280000 {
status = "okay";
pinctrl-0 = <&i2c3_pins>;
pinctrl-names = "default";
};
};
gsbi@12440000 {
status = "okay";
qcom,mode = <GSBI_PROT_I2C>;
......@@ -49,6 +123,54 @@ serial@16640000 {
};
};
sata_phy0: phy@1b400000 {
status = "okay";
};
sata0: sata@29000000 {
status = "okay";
target-supply = <&pm8921_s4>;
};
/* OTG */
usb1_phy: phy@12500000 {
status = "okay";
vddcx-supply = <&pm8921_s3>;
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l4>;
};
usb3_phy: phy@12520000 {
status = "okay";
vddcx-supply = <&pm8921_s3>;
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l23>;
};
usb4_phy: phy@12530000 {
status = "okay";
vddcx-supply = <&pm8921_s3>;
v3p3-supply = <&pm8921_l3>;
v1p8-supply = <&pm8921_l23>;
};
gadget1: gadget@12500000 {
status = "okay";
};
/* OTG */
usb1: usb@12500000 {
status = "okay";
};
usb3: usb@12520000 {
status = "okay";
};
usb4: usb@12530000 {
status = "okay";
};
amba {
/* eMMC */
sdcc1: sdcc@12400000 {
......
arch/arm/boot/dts/qcom-apq8064.dtsi
View file @ 0258b15d
......@@ -2,6 +2,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
#include <dt-bindings/soc/qcom,gsbi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
......@@ -112,6 +113,20 @@ mux {
function = "ps_hold";
};
};
i2c1_pins: i2c1 {
mux {
pins = "gpio20", "gpio21";
function = "gsbi1";
};
};
i2c3_pins: i2c3 {
mux {
pins = "gpio8", "gpio9";
function = "gsbi3";
};
};
};
intc: interrupt-controller@2000000 {
......@@ -225,6 +240,26 @@ i2c2: i2c@124a0000 {
};
};
gsbi3: gsbi@16200000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
reg = <0x16200000 0x100>;
clocks = <&gcc GSBI3_H_CLK>;
clock-names = "iface";
#address-cells = <1>;
#size-cells = <1>;
ranges;
i2c3: i2c@16280000 {
compatible = "qcom,i2c-qup-v1.1.1";
reg = <0x16280000 0x1000>;
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
clocks = <&gcc GSBI3_QUP_CLK>,
<&gcc GSBI3_H_CLK>;
clock-names = "core", "iface";
};
};
gsbi7: gsbi@16600000 {
status = "disabled";
compatible = "qcom,gsbi-v1.0.0";
......@@ -235,10 +270,9 @@ gsbi7: gsbi@16600000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
syscon-tcsr = <&tcsr>;
serial@16640000 {
gsbi7_serial: serial@16640000 {
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
reg = <0x16640000 0x1000>,
<0x16600000 0x1000>;
......@@ -276,6 +310,143 @@ mmcc: clock-controller@4000000 {
#reset-cells = <1>;
};
l2cc: clock-controller@2011000 {
compatible = "syscon";
reg = <0x2011000 0x1000>;
};
rpm@108000 {
compatible = "qcom,rpm-apq8064";
reg = <0x108000 0x1000>;
qcom,ipc = <&l2cc 0x8 2>;
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "ack", "err", "wakeup";
regulators {
compatible = "qcom,rpm-pm8921-regulators";
pm8921_hdmi_switch: hdmi-switch {
bias-pull-down;
};
};
};
usb1_phy: phy@12500000 {
compatible = "qcom,usb-otg-ci";
reg = <0x12500000 0x400>;
interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
status = "disabled";
dr_mode = "host";
clocks = <&gcc USB_HS1_XCVR_CLK>,
<&gcc USB_HS1_H_CLK>;
clock-names = "core", "iface";
resets = <&gcc USB_HS1_RESET>;
reset-names = "link";
};
usb3_phy: phy@12520000 {
compatible = "qcom,usb-otg-ci";
reg = <0x12520000 0x400>;
interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
status = "disabled";
dr_mode = "host";
clocks = <&gcc USB_HS3_XCVR_CLK>,
<&gcc USB_HS3_H_CLK>;
clock-names = "core", "iface";
resets = <&gcc USB_HS3_RESET>;
reset-names = "link";
};
usb4_phy: phy@12530000 {
compatible = "qcom,usb-otg-ci";
reg = <0x12530000 0x400>;
interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>;
status = "disabled";
dr_mode = "host";
clocks = <&gcc USB_HS4_XCVR_CLK>,
<&gcc USB_HS4_H_CLK>;
clock-names = "core", "iface";
resets = <&gcc USB_HS4_RESET>;
reset-names = "link";
};
gadget1: gadget@12500000 {
compatible = "qcom,ci-hdrc";
reg = <0x12500000 0x400>;
status = "disabled";
dr_mode = "peripheral";
interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
usb-phy = <&usb1_phy>;
};
usb1: usb@12500000 {
compatible = "qcom,ehci-host";
reg = <0x12500000 0x400>;
interrupts = <GIC_SPI 100 IRQ_TYPE_NONE>;
status = "disabled";
usb-phy = <&usb1_phy>;
};
usb3: usb@12520000 {
compatible = "qcom,ehci-host";
reg = <0x12520000 0x400>;
interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;
status = "disabled";
usb-phy = <&usb3_phy>;
};
usb4: usb@12530000 {
compatible = "qcom,ehci-host";
reg = <0x12530000 0x400>;
interrupts = <GIC_SPI 215 IRQ_TYPE_NONE>;
status = "disabled";
usb-phy = <&usb4_phy>;
};
sata_phy0: phy@1b400000 {
compatible = "qcom,apq8064-sata-phy";
status = "disabled";
reg = <0x1b400000 0x200>;
reg-names = "phy_mem";
clocks = <&gcc SATA_PHY_CFG_CLK>;
clock-names = "cfg";
#phy-cells = <0>;
};
sata0: sata@29000000 {
compatible = "generic-ahci";
status = "disabled";
reg = <0x29000000 0x180>;
interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>;
clocks = <&gcc SFAB_SATA_S_H_CLK>,
<&gcc SATA_H_CLK>,
<&gcc SATA_A_CLK>,
<&gcc SATA_RXOOB_CLK>,
<&gcc SATA_PMALIVE_CLK>;
clock-names = "slave_iface",
"iface",
"bus",
"rxoob",
"core_pmalive";
assigned-clocks = <&gcc SATA_RXOOB_CLK>,
<&gcc SATA_PMALIVE_CLK>;
assigned-clock-rates = <100000000>, <100000000>;
phys = <&sata_phy0>;
phy-names = "sata-phy";
};
/* Temporary fixed regulator */
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
......
arch/arm/boot/dts/qcom-msm8660.dtsi
View file @ 0258b15d
......@@ -37,6 +37,11 @@ L2: l2-cache {
};
};
cpu-pmu {
compatible = "qcom,scorpion-mp-pmu";
interrupts = <1 9 0x304>;
};
soc: soc {
#address-cells = <1>;
#size-cells = <1>;
......
arch/arm/boot/dts/qcom-pm8841.dtsi
View file @ 0258b15d
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
......@@ -7,6 +8,23 @@ usid4: pm8841@4 {
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
pm8841_mpps: mpps@a000 {
compatible = "qcom,pm8841-mpp";
reg = <0xa000 0x400>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <4 0xa0 0 IRQ_TYPE_NONE>,
<4 0xa1 0 IRQ_TYPE_NONE>,
<4 0xa2 0 IRQ_TYPE_NONE>,
<4 0xa3 0 IRQ_TYPE_NONE>;
};
temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400 0x100>;
interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
};
};
usid5: pm8841@5 {
......
arch/arm/boot/dts/qcom-pm8941.dtsi
View file @ 0258b15d
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
......@@ -7,12 +9,141 @@ usid0: pm8941@0 {
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000 0x100>,
<0x6100 0x100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
pwrkey@800 {
compatible = "qcom,pm8941-pwrkey";
reg = <0x800 0x100>;
interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
debounce = <15625>;
bias-pull-up;
};
pm8941_gpios: gpios@c000 {
compatible = "qcom,pm8941-gpio";
reg = <0xc000 0x2400>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
<0 0xc1 0 IRQ_TYPE_NONE>,
<0 0xc2 0 IRQ_TYPE_NONE>,
<0 0xc3 0 IRQ_TYPE_NONE>,
<0 0xc4 0 IRQ_TYPE_NONE>,
<0 0xc5 0 IRQ_TYPE_NONE>,
<0 0xc6 0 IRQ_TYPE_NONE>,
<0 0xc7 0 IRQ_TYPE_NONE>,
<0 0xc8 0 IRQ_TYPE_NONE>,
<0 0xc9 0 IRQ_TYPE_NONE>,
<0 0xca 0 IRQ_TYPE_NONE>,
<0 0xcb 0 IRQ_TYPE_NONE>,
<0 0xcc 0 IRQ_TYPE_NONE>,
<0 0xcd 0 IRQ_TYPE_NONE>,
<0 0xce 0 IRQ_TYPE_NONE>,
<0 0xcf 0 IRQ_TYPE_NONE>,
<0 0xd0 0 IRQ_TYPE_NONE>,
<0 0xd1 0 IRQ_TYPE_NONE>,
<0 0xd2 0 IRQ_TYPE_NONE>,
<0 0xd3 0 IRQ_TYPE_NONE>,
<0 0xd4 0 IRQ_TYPE_NONE>,
<0 0xd5 0 IRQ_TYPE_NONE>,
<0 0xd6 0 IRQ_TYPE_NONE>,
<0 0xd7 0 IRQ_TYPE_NONE>,
<0 0xd8 0 IRQ_TYPE_NONE>,
<0 0xd9 0 IRQ_TYPE_NONE>,
<0 0xda 0 IRQ_TYPE_NONE>,
<0 0xdb 0 IRQ_TYPE_NONE>,
<0 0xdc 0 IRQ_TYPE_NONE>,
<0 0xdd 0 IRQ_TYPE_NONE>,
<0 0xde 0 IRQ_TYPE_NONE>,
<0 0xdf 0 IRQ_TYPE_NONE>,
<0 0xe0 0 IRQ_TYPE_NONE>,
<0 0xe1 0 IRQ_TYPE_NONE>,
<0 0xe2 0 IRQ_TYPE_NONE>,
<0 0xe3 0 IRQ_TYPE_NONE>;
};
pm8941_mpps: mpps@a000 {
compatible = "qcom,pm8941-mpp";
reg = <0xa000 0x800>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
<0 0xa1 0 IRQ_TYPE_NONE>,
<0 0xa2 0 IRQ_TYPE_NONE>,
<0 0xa3 0 IRQ_TYPE_NONE>,
<0 0xa4 0 IRQ_TYPE_NONE>,
<0 0xa5 0 IRQ_TYPE_NONE>,
<0 0xa6 0 IRQ_TYPE_NONE>,
<0 0xa7 0 IRQ_TYPE_NONE>;
};
pm8941_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400 0x100>;
interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
io-channel-names = "thermal";
#thermal-sensor-cells = <0>;
};
pm8941_vadc: vadc@3100 {
compatible = "qcom,spmi-vadc";
reg = <0x3100 0x100>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
die_temp {
reg = <VADC_DIE_TEMP>;
};
ref_625mv {
reg = <VADC_REF_625MV>;
};
ref_1250v {
reg = <VADC_REF_1250MV>;
};
ref_gnd {
reg = <VADC_GND_REF>;
};
ref_vdd {
reg = <VADC_VDD_VADC>;
};
};
pm8941_iadc: iadc@3600 {
compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
reg = <0x3600 0x100>,
<0x12f1 0x1>;
interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
qcom,external-resistor-micro-ohms = <10000>;
};
};
usid1: pm8941@1 {
compatible ="qcom,spmi-pmic";
compatible = "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
wled@d800 {
compatible = "qcom,pm8941-wled";
reg = <0xd800 0x100>;
label = "backlight";
qcom,cs-out;
qcom,current-limit = <20>;
qcom,current-boost-limit = <805>;
qcom,switching-freq = <1600>;
qcom,ovp = <29>;
qcom,num-strings = <2>;
};
};
};
arch/arm/boot/dts/qcom-pma8084.dtsi
View file @ 0258b15d
#include <dt-bindings/iio/qcom,spmi-vadc.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
&spmi_bus {
......@@ -7,6 +9,96 @@ usid0: pma8084@0 {
reg = <0x0 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;
rtc@6000 {
compatible = "qcom,pm8941-rtc";
reg = <0x6000 0x100>,
<0x6100 0x100>;
reg-names = "rtc", "alarm";
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
};
pma8084_gpios: gpios@c000 {
compatible = "qcom,pma8084-gpio";
reg = <0xc000 0x1600>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
<0 0xc1 0 IRQ_TYPE_NONE>,
<0 0xc2 0 IRQ_TYPE_NONE>,
<0 0xc3 0 IRQ_TYPE_NONE>,
<0 0xc4 0 IRQ_TYPE_NONE>,
<0 0xc5 0 IRQ_TYPE_NONE>,
<0 0xc6 0 IRQ_TYPE_NONE>,
<0 0xc7 0 IRQ_TYPE_NONE>,
<0 0xc8 0 IRQ_TYPE_NONE>,
<0 0xc9 0 IRQ_TYPE_NONE>,
<0 0xca 0 IRQ_TYPE_NONE>,
<0 0xcb 0 IRQ_TYPE_NONE>,
<0 0xcc 0 IRQ_TYPE_NONE>,
<0 0xcd 0 IRQ_TYPE_NONE>,
<0 0xce 0 IRQ_TYPE_NONE>,
<0 0xcf 0 IRQ_TYPE_NONE>,
<0 0xd0 0 IRQ_TYPE_NONE>,
<0 0xd1 0 IRQ_TYPE_NONE>,
<0 0xd2 0 IRQ_TYPE_NONE>,
<0 0xd3 0 IRQ_TYPE_NONE>,
<0 0xd4 0 IRQ_TYPE_NONE>,
<0 0xd5 0 IRQ_TYPE_NONE>;
};
pma8084_mpps: mpps@a000 {
compatible = "qcom,pma8084-mpp";
reg = <0xa000 0x800>;
gpio-controller;
#gpio-cells = <2>;
interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
<0 0xa1 0 IRQ_TYPE_NONE>,
<0 0xa2 0 IRQ_TYPE_NONE>,
<0 0xa3 0 IRQ_TYPE_NONE>,
<0 0xa4 0 IRQ_TYPE_NONE>,
<0 0xa5 0 IRQ_TYPE_NONE>,
<0 0xa6 0 IRQ_TYPE_NONE>,
<0 0xa7 0 IRQ_TYPE_NONE>;
};
pma8084_temp: temp-alarm@2400 {
compatible = "qcom,spmi-temp-alarm";
reg = <0x2400 0x100>;
interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
#thermal-sensor-cells = <0>;
io-channels = <&pma8084_vadc VADC_DIE_TEMP>;
io-channel-names = "thermal";
};
pma8084_vadc: vadc@3100 {
compatible = "qcom,spmi-vadc";
reg = <0x3100 0x100>;
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
#address-cells = <1>;
#size-cells = <0>;
#io-channel-cells = <1>;
io-channel-ranges;
die_temp {
reg = <VADC_DIE_TEMP>;
};
ref_625mv {
reg = <VADC_REF_625MV>;
};
ref_1250v {
reg = <VADC_REF_1250MV>;
};
ref_buf_625mv {
reg = <VADC_SPARE1>;
};
ref_gnd {
reg = <VADC_GND_REF>;
};
ref_vdd {
reg = <VADC_VDD_VADC>;
};
};
};
usid1: pma8084@1 {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7