Commit 03145864 authored by Russell King's avatar Russell King Committed by David S. Miller

sfp: support 1G BiDi (eg, FiberStore SFP-GE-BX) modules

Some BiDi modules (eg, FiberStore SFP-GE-BX) are not compliant with
1000BASE-BX as they use different wavelengths from the 1000BASE-BX
standard (eg, 1310nm/1550nm rather than 1310nm/1490nm).  These modules
support 1000BASE-X ethernet, so detect them by a failure to find any
other support, the 8B10B encoding and a bit rate that falls within the
1Gbps window.
Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 44d15d93
......@@ -180,10 +180,7 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
unsigned long *support)
{
unsigned int br_min, br_nom, br_max;
phylink_set(support, Autoneg);
phylink_set(support, Pause);
phylink_set(support, Asym_Pause);
__ETHTOOL_DECLARE_LINK_MODE_MASK(modes) = { 0, };
/* Decode the bitrate information to MBd */
br_min = br_nom = br_max = 0;
......@@ -201,20 +198,20 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
/* Set ethtool support from the compliance fields. */
if (id->base.e10g_base_sr)
phylink_set(support, 10000baseSR_Full);
phylink_set(modes, 10000baseSR_Full);
if (id->base.e10g_base_lr)
phylink_set(support, 10000baseLR_Full);
phylink_set(modes, 10000baseLR_Full);
if (id->base.e10g_base_lrm)
phylink_set(support, 10000baseLRM_Full);
phylink_set(modes, 10000baseLRM_Full);
if (id->base.e10g_base_er)
phylink_set(support, 10000baseER_Full);
phylink_set(modes, 10000baseER_Full);
if (id->base.e1000_base_sx ||
id->base.e1000_base_lx ||
id->base.e1000_base_cx)
phylink_set(support, 1000baseX_Full);
phylink_set(modes, 1000baseX_Full);
if (id->base.e1000_base_t) {
phylink_set(support, 1000baseT_Half);
phylink_set(support, 1000baseT_Full);
phylink_set(modes, 1000baseT_Half);
phylink_set(modes, 1000baseT_Full);
}
/* 1000Base-PX or 1000Base-BX10 */
......@@ -228,20 +225,20 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
if ((id->base.sfp_ct_passive || id->base.sfp_ct_active) && br_nom) {
/* This may look odd, but some manufacturers use 12000MBd */
if (br_min <= 12000 && br_max >= 10300)
phylink_set(support, 10000baseCR_Full);
phylink_set(modes, 10000baseCR_Full);
if (br_min <= 3200 && br_max >= 3100)
phylink_set(support, 2500baseX_Full);
phylink_set(modes, 2500baseX_Full);
if (br_min <= 1300 && br_max >= 1200)
phylink_set(support, 1000baseX_Full);
phylink_set(modes, 1000baseX_Full);
}
if (id->base.sfp_ct_passive) {
if (id->base.passive.sff8431_app_e)
phylink_set(support, 10000baseCR_Full);
phylink_set(modes, 10000baseCR_Full);
}
if (id->base.sfp_ct_active) {
if (id->base.active.sff8431_app_e ||
id->base.active.sff8431_lim) {
phylink_set(support, 10000baseCR_Full);
phylink_set(modes, 10000baseCR_Full);
}
}
......@@ -249,18 +246,18 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
case 0x00: /* Unspecified */
break;
case 0x02: /* 100Gbase-SR4 or 25Gbase-SR */
phylink_set(support, 100000baseSR4_Full);
phylink_set(support, 25000baseSR_Full);
phylink_set(modes, 100000baseSR4_Full);
phylink_set(modes, 25000baseSR_Full);
break;
case 0x03: /* 100Gbase-LR4 or 25Gbase-LR */
case 0x04: /* 100Gbase-ER4 or 25Gbase-ER */
phylink_set(support, 100000baseLR4_ER4_Full);
phylink_set(modes, 100000baseLR4_ER4_Full);
break;
case 0x0b: /* 100Gbase-CR4 or 25Gbase-CR CA-L */
case 0x0c: /* 25Gbase-CR CA-S */
case 0x0d: /* 25Gbase-CR CA-N */
phylink_set(support, 100000baseCR4_Full);
phylink_set(support, 25000baseCR_Full);
phylink_set(modes, 100000baseCR4_Full);
phylink_set(modes, 25000baseCR_Full);
break;
default:
dev_warn(bus->sfp_dev,
......@@ -274,10 +271,28 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
id->base.fc_speed_200 ||
id->base.fc_speed_400) {
if (id->base.br_nominal >= 31)
phylink_set(support, 2500baseX_Full);
phylink_set(modes, 2500baseX_Full);
if (id->base.br_nominal >= 12)
phylink_set(support, 1000baseX_Full);
phylink_set(modes, 1000baseX_Full);
}
/* If we haven't discovered any modes that this module supports, try
* the encoding and bitrate to determine supported modes. Some BiDi
* modules (eg, 1310nm/1550nm) are not 1000BASE-BX compliant due to
* the differing wavelengths, so do not set any transceiver bits.
*/
if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS)) {
/* If the encoding and bit rate allows 1000baseX */
if (id->base.encoding == SFP_ENCODING_8B10B && br_nom &&
br_min <= 1300 && br_max >= 1200)
phylink_set(modes, 1000baseX_Full);
}
bitmap_or(support, support, modes, __ETHTOOL_LINK_MODE_MASK_NBITS);
phylink_set(support, Autoneg);
phylink_set(support, Pause);
phylink_set(support, Asym_Pause);
}
EXPORT_SYMBOL_GPL(sfp_parse_support);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment