Merge branch 'sched_clock-for-rmk' of...

Merge branch 'sched_clock-for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into devel-stable

arch/arm/Kconfig

@@ -51,9 +51,6 @@ config MIGHT_HAVE_PCI
 config SYS_SUPPORTS_APM_EMULATION
 	bool
 
-config HAVE_SCHED_CLOCK
-	bool
-
 config GENERIC_GPIO
 	bool
 
@@ -438,7 +435,6 @@ config ARCH_MXC
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
-	select HAVE_SCHED_CLOCK
 	select MULTI_IRQ_HANDLER
 	help
 	  Support for Freescale MXC/iMX-based family of processors
@@ -530,7 +526,6 @@ config ARCH_IXP4XX
 	select CPU_XSCALE
 	select GENERIC_GPIO
 	select GENERIC_CLOCKEVENTS
-	select HAVE_SCHED_CLOCK
 	select MIGHT_HAVE_PCI
 	select DMABOUNCE if PCI
 	help
@@ -601,7 +596,6 @@ config ARCH_MMP
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
-	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ
@@ -642,7 +636,6 @@ config ARCH_TEGRA
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
 	select HAVE_CLK
-	select HAVE_SCHED_CLOCK
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
 	select ARCH_HAS_CPUFREQ
@@ -659,7 +652,6 @@ config ARCH_PICOXCELL
 	select DW_APB_TIMER
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
-	select HAVE_SCHED_CLOCK
 	select HAVE_TCM
 	select NO_IOPORT
 	select SPARSE_IRQ
@@ -687,7 +679,6 @@ config ARCH_PXA
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select GPIO_PXA
-	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ
@@ -755,7 +746,6 @@ config ARCH_SA1100
 	select CPU_FREQ
 	select GENERIC_CLOCKEVENTS
 	select CLKDEV_LOOKUP
-	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_IDE
@@ -812,7 +802,6 @@ config ARCH_S5P64X0
 	select CLKSRC_MMIO
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
 	select GENERIC_CLOCKEVENTS
-	select HAVE_SCHED_CLOCK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
 	help
@@ -845,7 +834,6 @@ config ARCH_S5PV210
 	select ARM_L1_CACHE_SHIFT_6
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_CLOCKEVENTS
-	select HAVE_SCHED_CLOCK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
@@ -888,7 +876,6 @@ config ARCH_U300
 	depends on MMU
 	select CLKSRC_MMIO
 	select CPU_ARM926T
-	select HAVE_SCHED_CLOCK
 	select HAVE_TCM
 	select ARM_AMBA
 	select ARM_PATCH_PHYS_VIRT
@@ -946,7 +933,6 @@ config ARCH_OMAP
 	select ARCH_HAS_CPUFREQ
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
-	select HAVE_SCHED_CLOCK
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's OMAP platform (OMAP1/2/3/4).
@@ -1112,13 +1098,11 @@ config ARCH_ACORN
 config PLAT_IOP
 	bool
 	select GENERIC_CLOCKEVENTS
-	select HAVE_SCHED_CLOCK
 
 config PLAT_ORION
 	bool
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
-	select HAVE_SCHED_CLOCK
 
 config PLAT_PXA
 	bool

arch/arm/kernel/Makefile

@@ -14,8 +14,8 @@ CFLAGS_REMOVE_return_address.o = -pg
 # Object file lists.
 
 obj-y		:= elf.o entry-armv.o entry-common.o irq.o opcodes.o \
-		   process.o ptrace.o return_address.o setup.o signal.o \
-		   sys_arm.o stacktrace.o time.o traps.o
+		   process.o ptrace.o return_address.o sched_clock.o \
+		   setup.o signal.o stacktrace.o sys_arm.o time.o traps.o
 
 obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o
 
@@ -30,7 +30,6 @@ obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
 obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_ARM_CPU_SUSPEND)	+= sleep.o suspend.o
-obj-$(CONFIG_HAVE_SCHED_CLOCK)	+= sched_clock.o
 obj-$(CONFIG_SMP)		+= smp.o smp_tlb.o
 obj-$(CONFIG_HAVE_ARM_SCU)	+= smp_scu.o
 obj-$(CONFIG_HAVE_ARM_TWD)	+= smp_twd.o

arch/arm/kernel/time.c

@@ -147,8 +147,6 @@ void __init time_init(void)
 {
 	system_timer = machine_desc->timer;
 	system_timer->init();
-#ifdef CONFIG_HAVE_SCHED_CLOCK
 	sched_clock_postinit();
-#endif
 }
 

arch/arm/mach-davinci/time.c

@@ -19,11 +19,14 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 
-#include <mach/hardware.h>
+#include <asm/sched_clock.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
+
 #include <mach/cputype.h>
+#include <mach/hardware.h>
 #include <mach/time.h>
+
 #include "clock.h"
 
 static struct clock_event_device clockevent_davinci;
@@ -272,19 +275,9 @@ static cycle_t read_cycles(struct clocksource *cs)
 	return (cycles_t)timer32_read(t);
 }
 
-/*
- * Kernel assumes that sched_clock can be called early but may not have
- * things ready yet.
- */
-static cycle_t read_dummy(struct clocksource *cs)
-{
-	return 0;
-}
-
-
 static struct clocksource clocksource_davinci = {
 	.rating		= 300,
-	.read		= read_dummy,
+	.read		= read_cycles,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
@@ -292,12 +285,9 @@ static struct clocksource clocksource_davinci = {
 /*
  * Overwrite weak default sched_clock with something more precise
  */
-unsigned long long notrace sched_clock(void)
+static u32 notrace davinci_read_sched_clock(void)
 {
-	const cycle_t cyc = clocksource_davinci.read(&clocksource_davinci);
-
-	return clocksource_cyc2ns(cyc, clocksource_davinci.mult,
-				clocksource_davinci.shift);
+	return timer32_read(&timers[TID_CLOCKSOURCE]);
 }
 
 /*
@@ -397,12 +387,14 @@ static void __init davinci_timer_init(void)
 	davinci_clock_tick_rate = clk_get_rate(timer_clk);
 
 	/* setup clocksource */
-	clocksource_davinci.read = read_cycles;
 	clocksource_davinci.name = id_to_name[clocksource_id];
 	if (clocksource_register_hz(&clocksource_davinci,
 				    davinci_clock_tick_rate))
 		printk(err, clocksource_davinci.name);
 
+	setup_sched_clock(davinci_read_sched_clock, 32,
+			  davinci_clock_tick_rate);
+
 	/* setup clockevent */
 	clockevent_davinci.name = id_to_name[timers[TID_CLOCKEVENT].id];
 	clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,

arch/arm/mach-prima2/timer.c

@@ -18,6 +18,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <mach/map.h>
+#include <asm/sched_clock.h>
 #include <asm/mach/time.h>
 
 #define SIRFSOC_TIMER_COUNTER_LO	0x0000
@@ -165,21 +166,9 @@ static struct irqaction sirfsoc_timer_irq = {
 };
 
 /* Overwrite weak default sched_clock with more precise one */
-unsigned long long notrace sched_clock(void)
+static u32 notrace sirfsoc_read_sched_clock(void)
 {
-	static int is_mapped;
-
-	/*
-	 * sched_clock is called earlier than .init of sys_timer
-	 * if we map timer memory in .init of sys_timer, system
-	 * will panic due to illegal memory access
-	 */
-	if (!is_mapped) {
-		sirfsoc_of_timer_map();
-		is_mapped = 1;
-	}
-
-	return sirfsoc_timer_read(NULL) * (NSEC_PER_SEC / CLOCK_TICK_RATE);
+	return (u32)(sirfsoc_timer_read(NULL) & 0xffffffff);
 }
 
 static void __init sirfsoc_clockevent_init(void)
@@ -210,6 +199,8 @@ static void __init sirfsoc_timer_init(void)
 	BUG_ON(rate < CLOCK_TICK_RATE);
 	BUG_ON(rate % CLOCK_TICK_RATE);
 
+	sirfsoc_of_timer_map();
+
 	writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV);
 	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO);
 	writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI);
@@ -217,6 +208,8 @@ static void __init sirfsoc_timer_init(void)
 
 	BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE));
 
+	setup_sched_clock(sirfsoc_read_sched_clock, 32, CLOCK_TICK_RATE);
+
 	BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq));
 
 	sirfsoc_clockevent_init();

arch/arm/plat-nomadik/Kconfig

@@ -23,7 +23,6 @@ config HAS_MTU
 config NOMADIK_MTU_SCHED_CLOCK
 	bool
 	depends on HAS_MTU
-	select HAVE_SCHED_CLOCK
 	help
 	  Use the Multi Timer Unit as the sched_clock.
 

arch/arm/plat-versatile/Kconfig

@@ -12,6 +12,5 @@ config PLAT_VERSATILE_LEDS
 
 config PLAT_VERSATILE_SCHED_CLOCK
 	def_bool y if !ARCH_INTEGRATOR_AP
-	select HAVE_SCHED_CLOCK
 
 endif