Commit 036f29d5 authored by Zhangfei Gao's avatar Zhangfei Gao Committed by Chris Ball

mmc: dw_mmc: add dw_mmc-k3 for k3 platform

Add dw_mmc-k3.c for k3v2, support sd/emmc
Signed-off-by: default avatarZhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: default avatarZhigang Wang <brooke.wangzhigang@huawei.com>
Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarChris Ball <chris@printf.net>
parent bf626e55
* Hisilicon specific extensions to the Synopsys Designware Mobile
Storage Host Controller
Read synopsys-dw-mshc.txt for more details
The Synopsys designware mobile storage host controller is used to interface
a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
differences between the core Synopsys dw mshc controller properties described
by synopsys-dw-mshc.txt and the properties used by the Hisilicon specific
extensions to the Synopsys Designware Mobile Storage Host Controller.
Required Properties:
* compatible: should be one of the following.
- "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extentions.
* clock-freq-table: should be the frequency (in Hz) array of the ciu clock
in each supported mode.
0. CIU clock rate in Hz for DS mode
1. CIU clock rate in Hz for MMC HS mode
2. CIU clock rate in Hz for SD HS mode
3. CIU clock rate in Hz for SDR12 mode
4. CIU clock rate in Hz for SDR25 mode
5. CIU clock rate in Hz for SDR50 mode
6. CIU clock rate in Hz for SDR104 mode
7. CIU clock rate in Hz for DDR50 mode
8. CIU clock rate in Hz for HS200 mode
Example:
/* for Hi3620 */
/* SoC portion */
dwmmc_0: dwmmc0@fcd03000 {
compatible = "hisilicon,hi4511-dw-mshc";
reg = <0xfcd03000 0x1000>;
interrupts = <0 16 4>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mmc_clock HI3620_SD_CIUCLK>, <&clock HI3620_DDRC_PER_CLK>;
clock-names = "ciu", "biu";
clock-freq-table =
<25000000 0 50000000 25000000 50000000 100000000 0 50000000>;
};
/* Board portion */
dwmmc0@fcd03000 {
num-slots = <1>;
vmmc-supply = <&ldo12>;
fifo-depth = <0x100>;
supports-highspeed;
pinctrl-names = "default";
pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>;
slot@0 {
reg = <0>;
bus-width = <4>;
disable-wp;
cd-gpios = <&gpio10 3 0>;
};
};
......@@ -576,6 +576,16 @@ config MMC_DW_SOCFPGA
This selects support for Altera SoCFPGA specific extensions to the
Synopsys DesignWare Memory Card Interface driver.
config MMC_DW_K3
tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
depends on MMC_DW
select MMC_DW_PLTFM
select MMC_DW_IDMAC
help
This selects support for Hisilicon K3 SoC specific extensions to the
Synopsys DesignWare Memory Card Interface driver. Select this option
for platforms based on Hisilicon K3 SoC's.
config MMC_DW_PCI
tristate "Synopsys Designware MCI support on PCI bus"
depends on MMC_DW && PCI
......
......@@ -44,6 +44,7 @@ obj-$(CONFIG_MMC_DW) += dw_mmc.o
obj-$(CONFIG_MMC_DW_PLTFM) += dw_mmc-pltfm.o
obj-$(CONFIG_MMC_DW_EXYNOS) += dw_mmc-exynos.o
obj-$(CONFIG_MMC_DW_SOCFPGA) += dw_mmc-socfpga.o
obj-$(CONFIG_MMC_DW_K3) += dw_mmc-k3.o
obj-$(CONFIG_MMC_DW_PCI) += dw_mmc-pci.o
obj-$(CONFIG_MMC_SH_MMCIF) += sh_mmcif.o
obj-$(CONFIG_MMC_JZ4740) += jz4740_mmc.o
......
/*
* Copyright (c) 2013 Linaro Ltd.
* Copyright (c) 2013 Hisilicon Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/mmc/host.h>
#include <linux/mmc/dw_mmc.h>
#include <linux/of_address.h>
#include "dw_mmc.h"
#include "dw_mmc-pltfm.h"
#define MAX_NUMS 10
struct dw_mci_k3_priv_data {
u32 clk_table[MAX_NUMS];
};
static void dw_mci_k3_set_ios(struct dw_mci *host, struct mmc_ios *ios)
{
struct dw_mci_k3_priv_data *priv = host->priv;
u32 rate = priv->clk_table[ios->timing];
int ret;
if (!rate) {
dev_warn(host->dev,
"no specified rate in timing %u\n", ios->timing);
return;
}
ret = clk_set_rate(host->ciu_clk, rate);
if (ret)
dev_warn(host->dev, "failed to set clock rate %uHz\n", rate);
host->bus_hz = clk_get_rate(host->ciu_clk);
}
static int dw_mci_k3_parse_dt(struct dw_mci *host)
{
struct dw_mci_k3_priv_data *priv;
struct device_node *node = host->dev->of_node;
struct property *prop;
const __be32 *cur;
u32 val, num = 0;
priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
if (!priv) {
dev_err(host->dev, "mem alloc failed for private data\n");
return -ENOMEM;
}
host->priv = priv;
of_property_for_each_u32(node, "clock-freq-table", prop, cur, val) {
if (num >= MAX_NUMS)
break;
priv->clk_table[num++] = val;
}
return 0;
}
static const struct dw_mci_drv_data k3_drv_data = {
.set_ios = dw_mci_k3_set_ios,
.parse_dt = dw_mci_k3_parse_dt,
};
static const struct of_device_id dw_mci_k3_match[] = {
{ .compatible = "hisilicon,hi4511-dw-mshc", .data = &k3_drv_data, },
{},
};
MODULE_DEVICE_TABLE(of, dw_mci_k3_match);
static int dw_mci_k3_probe(struct platform_device *pdev)
{
const struct dw_mci_drv_data *drv_data;
const struct of_device_id *match;
match = of_match_node(dw_mci_k3_match, pdev->dev.of_node);
drv_data = match->data;
return dw_mci_pltfm_register(pdev, drv_data);
}
static int dw_mci_k3_suspend(struct device *dev)
{
struct dw_mci *host = dev_get_drvdata(dev);
int ret;
ret = dw_mci_suspend(host);
if (!ret)
clk_disable_unprepare(host->ciu_clk);
return ret;
}
static int dw_mci_k3_resume(struct device *dev)
{
struct dw_mci *host = dev_get_drvdata(dev);
int ret;
ret = clk_prepare_enable(host->ciu_clk);
if (ret) {
dev_err(host->dev, "failed to enable ciu clock\n");
return ret;
}
return dw_mci_resume(host);
}
SIMPLE_DEV_PM_OPS(dw_mci_k3_pmops, dw_mci_k3_suspend, dw_mci_k3_resume);
static struct platform_driver dw_mci_k3_pltfm_driver = {
.probe = dw_mci_k3_probe,
.remove = dw_mci_pltfm_remove,
.driver = {
.name = "dwmmc_k3",
.of_match_table = dw_mci_k3_match,
.pm = &dw_mci_k3_pmops,
},
};
module_platform_driver(dw_mci_k3_pltfm_driver);
MODULE_DESCRIPTION("K3 Specific DW-MSHC Driver Extension");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:dwmmc-k3");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment