Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] CLPS7500 doesn't have IO ports
  [ARM] Fix more apm-emulation.h
  [ARM] 4234/1: Introduce get_irqnr_preamble and arch_ret_to_user for ns9xxx.
  [ARM] 4233/1: nand/s3c2410.c: warning fix
  [ARM] 4226/1: initial .data and .bss mappings of XIP kernel should be TEXT_OFFSET
  [ARM] 4224/2: allow XIP kernel to boot again
  [ARM] 4232/1: AT91: Generic GPIO bug
  [ARM] 4231/1: AT91: Merge and typo fixes.
  [ARM] 4229/1: S3C2410: Add MACH_QT2410 to s3c2410_defconfig
  [ARM] 4228/2: S3C24XX: update s3c2410_defconfig for 2.6.21-rc1

arch/arm/Kconfig

@@ -171,6 +171,7 @@ config ARCH_CLPS7500
 	bool "Cirrus CL-PS7500FE"
 	select TIMER_ACORN
 	select ISA
+	select NO_IOPORT
 	help
 	  Support for the Cirrus Logic PS7500FE system-on-a-chip.
 

arch/arm/configs/s3c2410_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Thu Feb 15 11:26:24 2007
+# Linux kernel version: 2.6.21-rc1
+# Wed Feb 21 16:48:01 2007
 #
 CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 # CONFIG_GENERIC_TIME is not set
 CONFIG_MMU=y
+CONFIG_NO_IOPORT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -15,6 +17,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
@@ -33,6 +36,7 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_IPC_NS is not set
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
@@ -120,6 +124,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
@@ -161,6 +166,7 @@ CONFIG_MACH_OTOM=y
 CONFIG_MACH_AML_M5900=y
 CONFIG_BAST_PC104_IRQ=y
 CONFIG_MACH_VR1000=y
+CONFIG_MACH_QT2410=y
 CONFIG_CPU_S3C2412=y
 CONFIG_S3C2412_DMA=y
 CONFIG_S3C2412_PM=y
@@ -190,6 +196,7 @@ CONFIG_CPU_S3C2442=y
 #
 CONFIG_SMDK2440_CPU2442=y
 CONFIG_CPU_S3C2443=y
+CONFIG_S3C2443_DMA=y
 
 #
 # S3C2443 Machines
@@ -250,6 +257,7 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
 # CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -259,6 +267,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0"
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
 
 #
 # Floating point emulation
@@ -287,7 +296,7 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 # CONFIG_PM_SYSFS_DEPRECATED is not set
-CONFIG_APM=y
+# CONFIG_APM_EMULATION is not set
 
 #
 # Networking
@@ -303,6 +312,7 @@ CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
 # CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -387,6 +397,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 
 #
@@ -506,6 +517,7 @@ CONFIG_PARPORT_1284=y
 # Plug and Play support
 #
 # CONFIG_PNP is not set
+# CONFIG_PNPACPI is not set
 
 #
 # Block devices
@@ -680,6 +692,7 @@ CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_GPIO is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 # CONFIG_MOUSE_SERIAL is not set
@@ -848,12 +861,13 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BITBANG=m
 # CONFIG_SPI_BUTTERFLY is not set
-CONFIG_SPI_S3C24XX_GPIO=m
 CONFIG_SPI_S3C24XX=m
+CONFIG_SPI_S3C24XX_GPIO=m
 
 #
 # SPI Protocol Masters
 #
+# CONFIG_SPI_AT25 is not set
 
 #
 # Dallas's 1-wire bus
@@ -869,6 +883,7 @@ CONFIG_HWMON_VID=m
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ADM9240 is not set
 # CONFIG_SENSORS_ASB100 is not set
@@ -910,7 +925,11 @@ CONFIG_SENSORS_LM85=m
 #
 # Misc devices
 #
-# CONFIG_TIFM_CORE is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
 
 #
 # LED devices
@@ -945,16 +964,22 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 #
 # Graphics support
 #
-CONFIG_FIRMWARE_EDID=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
 # CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frambuffer hardware drivers
+#
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_S3C2410=y
 # CONFIG_FB_S3C2410_DEBUG is not set
@@ -976,7 +1001,6 @@ CONFIG_FONT_8x16=y
 # Logo configuration
 #
 # CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -987,6 +1011,7 @@ CONFIG_FONT_8x16=y
 # HID Devices
 #
 CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
 
 #
 # USB support
@@ -1001,7 +1026,6 @@ CONFIG_USB=y
 # Miscellaneous USB options
 #
 CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_BANDWIDTH is not set
 # CONFIG_USB_DYNAMIC_MINORS is not set
 # CONFIG_USB_SUSPEND is not set
 # CONFIG_USB_OTG is not set
@@ -1011,7 +1035,8 @@ CONFIG_USB_DEVICEFS=y
 #
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 
@@ -1052,6 +1077,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_ATI_REMOTE2 is not set
 # CONFIG_USB_KEYSPAN_REMOTE is not set
 # CONFIG_USB_APPLETOUCH is not set
+# CONFIG_USB_GTCO is not set
 
 #
 # USB Imaging devices
@@ -1089,6 +1115,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
@@ -1134,6 +1161,7 @@ CONFIG_RTC_INTF_DEV=y
 #
 # RTC drivers
 #
+# CONFIG_RTC_DRV_CMOS is not set
 # CONFIG_RTC_DRV_X1205 is not set
 # CONFIG_RTC_DRV_DS1307 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
@@ -1339,15 +1367,16 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1358,6 +1387,7 @@ CONFIG_DEBUG_INFO=y
 CONFIG_FRAME_POINTER=y
 CONFIG_FORCED_INLINING=y
 # CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
@@ -1387,4 +1417,4 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
-CONFIG_IOMAP_COPY=y
+CONFIG_HAS_IOMEM=y

arch/arm/kernel/head.S

@@ -48,9 +48,11 @@
 	.endm
 
 #ifdef CONFIG_XIP_KERNEL
-#define TEXTADDR  XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+#define KERNEL_START	XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+#define KERNEL_END	_edata_loc
 #else
-#define TEXTADDR  KERNEL_RAM_VADDR
+#define KERNEL_START	KERNEL_RAM_VADDR
+#define KERNEL_END	_end
 #endif
 
 /*
@@ -240,16 +242,32 @@ __create_page_tables:
 	 * Now setup the pagetables for our kernel direct
 	 * mapped region.
 	 */
-	add	r0, r4,  #(TEXTADDR & 0xff000000) >> 18	@ start of kernel
-	str	r3, [r0, #(TEXTADDR & 0x00f00000) >> 18]!
-
-	ldr	r6, =(_end - PAGE_OFFSET - 1)	@ r6 = number of sections
-	mov	r6, r6, lsr #20			@ needed for kernel minus 1
+	add	r0, r4,  #(KERNEL_START & 0xff000000) >> 18
+	str	r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]!
+	ldr	r6, =(KERNEL_END - 1)
+	add	r0, r0, #4
+	add	r6, r4, r6, lsr #18
+1:	cmp	r0, r6
+	add	r3, r3, #1 << 20
+	strls	r3, [r0], #4
+	bls	1b
 
-1:	add	r3, r3, #1 << 20
-	str	r3, [r0, #4]!
-	subs	r6, r6, #1
-	bgt	1b
+#ifdef CONFIG_XIP_KERNEL
+	/*
+	 * Map some ram to cover our .data and .bss areas.
+	 */
+	orr	r3, r7, #(KERNEL_RAM_PADDR & 0xff000000)
+	orr	r3, r3, #(KERNEL_RAM_PADDR & 0x00f00000)
+	add	r0, r4,  #(KERNEL_RAM_VADDR & 0xff000000) >> 18
+	str	r3, [r0, #(KERNEL_RAM_VADDR & 0x00f00000) >> 18]!
+	ldr	r6, =(_end - 1)
+	add	r0, r0, #4
+	add	r6, r4, r6, lsr #18
+1:	cmp	r0, r6
+	add	r3, r3, #1 << 20
+	strls	r3, [r0], #4
+	bls	1b
+#endif
 
 	/*
 	 * Then map first 1MB of ram in case it contains our boot params.
@@ -259,22 +277,6 @@ __create_page_tables:
 	orr	r6, r6, #(PHYS_OFFSET & 0x00e00000)
 	str	r6, [r0]
 
-#ifdef CONFIG_XIP_KERNEL
-	/*
-	 * Map some ram to cover our .data and .bss areas.
-	 * Mapping 3MB should be plenty.
-	 */
-	sub	r3, r4, #PHYS_OFFSET
-	mov	r3, r3, lsr #20
-	add	r0, r0, r3, lsl #2
-	add	r6, r6, r3, lsl #20
-	str	r6, [r0], #4
-	add	r6, r6, #(1 << 20)
-	str	r6, [r0], #4
-	add	r6, r6, #(1 << 20)
-	str	r6, [r0]
-#endif
-
 #ifdef CONFIG_DEBUG_LL
 	ldr	r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
 	/*

arch/arm/kernel/vmlinux.lds.S

@@ -156,6 +156,7 @@ SECTIONS
 
 		_edata = .;
 	}
+	_edata_loc = __data_loc + SIZEOF(.data);
 
 	.bss : {
 		__bss_start = .;	/* BSS				*/

arch/arm/mach-at91/at91sam9263.c

@@ -124,7 +124,7 @@ static struct clk isi_clk = {
 };
 static struct clk lcdc_clk = {
 	.name		= "lcdc_clk",
-	.pmc_mask	= 1 << AT91SAM9263_ID_ISI,
+	.pmc_mask	= 1 << AT91SAM9263_ID_LCDC,
 	.type		= CLK_TYPE_PERIPHERAL,
 };
 static struct clk ohci_clk = {

arch/arm/mach-at91/at91sam9263_devices.c

@@ -553,7 +553,7 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
 	if (enable_spi0) {
 		at91_set_B_periph(AT91_PIN_PA0, 0);	/* SPI0_MISO */
 		at91_set_B_periph(AT91_PIN_PA1, 0);	/* SPI0_MOSI */
-		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI1_SPCK */
+		at91_set_B_periph(AT91_PIN_PA2, 0);	/* SPI0_SPCK */
 
 		at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk");
 		platform_device_register(&at91sam9263_spi0_device);

arch/arm/mach-at91/gpio.c

@@ -210,7 +210,7 @@ int gpio_direction_input(unsigned pin)
 
 	if (!pio || !(__raw_readl(pio + PIO_PSR) & mask))
 		return -EINVAL;
-	__raw_writel(mask, pio + PIO_OER);
+	__raw_writel(mask, pio + PIO_ODR);
 	return 0;
 }
 EXPORT_SYMBOL(gpio_direction_input);

arch/arm/mach-pxa/sharpsl_pm.c

@@ -20,10 +20,10 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/platform_device.h>
+#include <linux/apm-emulation.h>
 
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/apm-emulation.h>
 #include <asm/arch/pm.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/sharpsl.h>

drivers/mtd/nand/s3c2410.c

@@ -473,7 +473,7 @@ static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u
 	ecc_code[1] = ecc >> 8;
 	ecc_code[2] = ecc >> 16;
 
-	pr_debug("%s: returning ecc %06x\n", __func__, ecc);
+	pr_debug("%s: returning ecc %06lx\n", __func__, ecc);
 
 	return 0;
 }

include/asm-arm/arch-at91/hardware.h

@@ -31,7 +31,7 @@
 
 /*
  * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
- * to 0xFEF78000 .. 0xFF000000.  (5444Kb)
+ * to 0xFEF78000 .. 0xFF000000.  (544Kb)
  */
 #define AT91_IO_PHYS_BASE	0xFFF78000
 #define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)

include/asm-arm/arch-at91rm9200/entry-macro.S

-/*
- * include/asm-arm/arch-at91rm9200/entry-macro.S
- *
- *  Copyright (C) 2003-2005 SAN People
- *
- * Low-level IRQ helper macros for AT91RM9200 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_aic.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro  get_irqnr_preamble, base, tmp
-	.endm
-
-	.macro  arch_ret_to_user, tmp1, tmp2
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\base, =(AT91_VA_BASE_SYS)		@ base virtual address of SYS peripherals
-	ldr	\irqnr, [\base, #AT91_AIC_IVR]		@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-	ldr	\irqstat, [\base, #AT91_AIC_ISR]	@ read interrupt source number
-	teq	\irqstat, #0				@ ISR is 0 when no current interrupt, or spurious interrupt
-	streq	\tmp, [\base, #AT91_AIC_EOICR]		@ not going to be handled further, then ACK it now.
-	.endm
-

include/asm-arm/arch-ns9xxx/entry-macro.S

@@ -11,6 +11,12 @@
 #include <asm/hardware.h>
 #include <asm/arch-ns9xxx/regs-sys.h>
 
+		.macro	get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro	arch_ret_to_user, tmp1, tmp2
+		.endm
+
 		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
 		ldr	\base, =SYS_ISRADDR
 		ldr	\irqstat, [\base, #(SYS_ISA - SYS_ISRADDR)]