Skip to content

L
linux
Commit 03a36f17 authored by H Hartley Sweeten's avatar H Hartley Sweeten Committed by Greg Kroah-Hartman
Browse files
Options

staging: comedi: pcmmio: cleanup the digital i/o register defines 

Redefine the registers used to access the digital i/o so that they
are based on the dev->iobase of the board instead of the 'asic_iobase'
that is stored in the private data.

Remove the then unused 'asic_iobase'.
Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: default avatarIan Abbott <abbotti@mev.co.uk>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 0cc4f3bd
Hide whitespace changes
Inline Side-by-side
Showing with 47 additions and 71 deletions
drivers/staging/comedi/drivers/pcmmio.c
View file @ 03a36f17
......@@ -133,6 +133,34 @@ Configuration Options:
#define PCMMIO_AO_RESOURCE_ENA_REG 0x0b
#define PCMMIO_AO_2ND_DAC_OFFSET 0x04
/*
* WinSystems WS16C48
*
* Offset Page 0 Page 1 Page 2 Page 3
* ------ ----------- ----------- ----------- -----------
* 0x10 Port 0 I/O Port 0 I/O Port 0 I/O Port 0 I/O
* 0x11 Port 1 I/O Port 1 I/O Port 1 I/O Port 1 I/O
* 0x12 Port 2 I/O Port 2 I/O Port 2 I/O Port 2 I/O
* 0x13 Port 3 I/O Port 3 I/O Port 3 I/O Port 3 I/O
* 0x14 Port 4 I/O Port 4 I/O Port 4 I/O Port 4 I/O
* 0x15 Port 5 I/O Port 5 I/O Port 5 I/O Port 5 I/O
* 0x16 INT_PENDING INT_PENDING INT_PENDING INT_PENDING
* 0x17 Page/Lock Page/Lock Page/Lock Page/Lock
* 0x18 N/A POL_0 ENAB_0 INT_ID0
* 0x19 N/A POL_1 ENAB_1 INT_ID1
* 0x1a N/A POL_2 ENAB_2 INT_ID2
*/
#define PCMMIO_PORT_REG(x) (0x10 + (x))
#define PCMMIO_INT_PENDING_REG 0x16
#define PCMMIO_PAGE_LOCK_REG 0x17
#define PCMMIO_LOCK_PORT(x) ((1 << (x)) & 0x3f)
#define PCMMIO_PAGE(x) (((x) & 0x3) << 6)
#define PCMMIO_PAGE_MASK PCMUIO_PAGE(3)
#define PCMMIO_PAGE_POL 1
#define PCMMIO_PAGE_ENAB 2
#define PCMMIO_PAGE_INT_ID 3
#define PCMMIO_PAGE_REG(x) (0x18 + (x))
/* This stuff is all from pcmuio.c -- it refers to the DIO subdevices only */
#define CHANS_PER_PORT 8
#define PORTS_PER_ASIC 6
......@@ -149,51 +177,9 @@ Configuration Options:
#define ASIC_IOSIZE (0x0B)
#define PCMMIO48_IOSIZE ASIC_IOSIZE
/* Some offsets - these are all in the 16byte IO memory offset from
the base address. Note that there is a paging scheme to swap out
offsets 0x8-0xA using the PAGELOCK register. See the table below.
Register(s) Pages R/W? Description
--------------------------------------------------------------
REG_PORTx All R/W Read/Write/Configure IO
REG_INT_PENDING All ReadOnly Quickly see which INT_IDx has int.
REG_PAGELOCK All WriteOnly Select a page
REG_POLx Pg. 1 only WriteOnly Select edge-detection polarity
REG_ENABx Pg. 2 only WriteOnly Enable/Disable edge-detect. int.
REG_INT_IDx Pg. 3 only R/W See which ports/bits have ints.
*/
#define REG_PORT0 0x0
#define REG_PORT1 0x1
#define REG_PORT2 0x2
#define REG_PORT3 0x3
#define REG_PORT4 0x4
#define REG_PORT5 0x5
#define REG_INT_PENDING 0x6
#define REG_PAGELOCK 0x7 /*
* page selector register, upper 2 bits select
* a page and bits 0-5 are used to 'lock down'
* a particular port above to make it readonly.
*/
#define REG_POL0 0x8
#define REG_POL1 0x9
#define REG_POL2 0xA
#define REG_ENAB0 0x8
#define REG_ENAB1 0x9
#define REG_ENAB2 0xA
#define REG_INT_ID0 0x8
#define REG_INT_ID1 0x9
#define REG_INT_ID2 0xA
#define NUM_PAGED_REGS 3
#define NUM_PAGES 4
#define FIRST_PAGED_REG 0x8
#define REG_PAGE_BITOFFSET 6
#define REG_LOCK_BITOFFSET 0
#define REG_PAGE_MASK (~((0x1<<REG_PAGE_BITOFFSET)-1))
#define REG_LOCK_MASK (~(REG_PAGE_MASK))
#define PAGE_POL 1
#define PAGE_ENAB 2
#define PAGE_INT_ID 3
static const struct comedi_lrange pcmmio_ai_ranges = {
4, {
......@@ -268,7 +254,6 @@ struct pcmmio_subdev_private {
* feel free to suggest moving the variable to the struct comedi_device struct.
*/
struct pcmmio_private {
unsigned long asic_iobase;
spinlock_t spinlock;
struct pcmmio_subdev_private *sprivs;
......@@ -365,31 +350,26 @@ static int pcmmio_dio_insn_config(struct comedi_device *dev,
static void switch_page(struct comedi_device *dev, int page)
{
struct pcmmio_private *devpriv = dev->private;
outb(page << REG_PAGE_BITOFFSET, devpriv->asic_iobase + REG_PAGELOCK);
outb(PCMMIO_PAGE(page), dev->iobase + PCMMIO_PAGE_LOCK_REG);
}
static void pcmmio_reset(struct comedi_device *dev)
{
struct pcmmio_private *devpriv = dev->private;
unsigned long baseaddr = devpriv->asic_iobase;
int port, page;
switch_page(dev, 0); /* switch back to page 0 */
/* first, clear all the DIO port bits */
for (port = 0; port < PORTS_PER_ASIC; ++port)
outb(0, baseaddr + REG_PORT0 + port);
outb(0, dev->iobase + PCMMIO_PORT_REG(port));
/* Next, clear all the paged registers for each page */
for (page = 1; page < NUM_PAGES; ++page) {
int reg;
/* now clear all the paged registers */
switch_page(dev, page);
for (reg = FIRST_PAGED_REG;
reg < FIRST_PAGED_REG + NUM_PAGED_REGS; ++reg)
outb(0, baseaddr + reg);
for (reg = 0; reg < NUM_PAGED_REGS; ++reg)
outb(0, dev->iobase + PCMMIO_PAGE_REG(reg));
}
/* switch back to default page 0 */
......@@ -399,7 +379,6 @@ static void pcmmio_reset(struct comedi_device *dev)
static void pcmmio_stop_intr(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct pcmmio_private *devpriv = dev->private;
int nports, firstport, asic, port;
asic = subpriv->dio.intr.asic;
......@@ -411,10 +390,10 @@ static void pcmmio_stop_intr(struct comedi_device *dev,
s->async->inttrig = NULL;
nports = subpriv->dio.intr.num_asic_chans / CHANS_PER_PORT;
firstport = subpriv->dio.intr.asic_chan / CHANS_PER_PORT;
switch_page(dev, PAGE_ENAB);
switch_page(dev, PCMMIO_PAGE_ENAB);
for (port = firstport; port < firstport + nports; ++port) {
/* disable all intrs for this subdev.. */
outb(0, devpriv->asic_iobase + REG_ENAB0 + port);
outb(0, dev->iobase + PCMMIO_PAGE_REG(port));
}
}
......@@ -429,13 +408,13 @@ static irqreturn_t interrupt_pcmmio(int irq, void *d)
if (irq == dev->irq) {
unsigned long flags;
unsigned triggered = 0;
unsigned long iobase = devpriv->asic_iobase;
/* it is an interrupt for ASIC #asic */
unsigned char int_pend;
spin_lock_irqsave(&devpriv->spinlock, flags);
int_pend = inb(iobase + REG_INT_PENDING) & 0x07;
int_pend = inb(dev->iobase + PCMMIO_INT_PENDING_REG);
int_pend &= 0x07;
if (int_pend) {
int port;
......@@ -444,19 +423,18 @@ static irqreturn_t interrupt_pcmmio(int irq, void *d)
if (int_pend & (0x1 << port)) {
unsigned char
io_lines_with_edges = 0;
switch_page(dev, PAGE_INT_ID);
switch_page(dev, PCMMIO_PAGE_INT_ID);
io_lines_with_edges =
inb(iobase +
REG_INT_ID0 + port);
inb(dev->iobase +
PCMMIO_PAGE_REG(port));
if (io_lines_with_edges)
/*
* clear pending
* interrupt
*/
outb(0, iobase +
REG_INT_ID0 +
port);
outb(0, dev->iobase +
PCMMIO_PAGE_REG(port));
triggered |=
io_lines_with_edges <<
......@@ -578,8 +556,6 @@ static irqreturn_t interrupt_pcmmio(int irq, void *d)
static int pcmmio_start_intr(struct comedi_device *dev,
struct comedi_subdevice *s)
{
struct pcmmio_private *devpriv = dev->private;
if (!subpriv->dio.intr.continuous && subpriv->dio.intr.stop_count == 0) {
/* An empty acquisition! */
s->async->events |= COMEDI_CB_EOA;
......@@ -628,7 +604,7 @@ static int pcmmio_start_intr(struct comedi_device *dev,
/* done, we told the board what irq to use */
}
switch_page(dev, PAGE_ENAB);
switch_page(dev, PCMMIO_PAGE_ENAB);
for (port = firstport; port < firstport + nports; ++port) {
unsigned enab =
bits >> (subpriv->dio.intr.first_chan + (port -
......@@ -637,9 +613,9 @@ static int pcmmio_start_intr(struct comedi_device *dev,
pol_bits >> (subpriv->dio.intr.first_chan +
(port - firstport) * 8) & 0xff;
/* set enab intrs for this subdev.. */
outb(enab, devpriv->asic_iobase + REG_ENAB0 + port);
switch_page(dev, PAGE_POL);
outb(pol, devpriv->asic_iobase + REG_ENAB0 + port);
outb(enab, dev->iobase + PCMMIO_PAGE_REG(port));
switch_page(dev, PCMMIO_PAGE_POL);
outb(pol, dev->iobase + PCMMIO_PAGE_REG(port));
}
}
return 0;
......@@ -955,7 +931,6 @@ static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
if (!devpriv)
return -ENOMEM;
devpriv->asic_iobase = dev->iobase + 16;
spin_lock_init(&devpriv->spinlock);
chans_left = CHANS_PER_ASIC * 1;
......@@ -1029,7 +1004,8 @@ static int pcmmio_attach(struct comedi_device *dev, struct comedi_devconfig *it)
++asic;
thisasic_chanct = 0;
}
subpriv->iobases[byte_no] = devpriv->asic_iobase + port;
subpriv->iobases[byte_no] = dev->iobase +
PCMMIO_PORT_REG(port);
if (thisasic_chanct <
CHANS_PER_PORT * INTR_PORTS_PER_ASIC
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7