Commit 03ce758e authored by Greg KH's avatar Greg KH Committed by David S. Miller

Drivers: network: more __dev* removal

Remove some __dev* markings that snuck in the 3.8-rc1 merge window in
the drivers/net/* directory.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 9b1536c4
......@@ -141,7 +141,7 @@ static int orion_mdio_reset(struct mii_bus *bus)
return 0;
}
static int __devinit orion_mdio_probe(struct platform_device *pdev)
static int orion_mdio_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct mii_bus *bus;
......@@ -197,7 +197,7 @@ static int __devinit orion_mdio_probe(struct platform_device *pdev)
return 0;
}
static int __devexit orion_mdio_remove(struct platform_device *pdev)
static int orion_mdio_remove(struct platform_device *pdev)
{
struct mii_bus *bus = platform_get_drvdata(pdev);
mdiobus_unregister(bus);
......@@ -214,7 +214,7 @@ MODULE_DEVICE_TABLE(of, orion_mdio_match);
static struct platform_driver orion_mdio_driver = {
.probe = orion_mdio_probe,
.remove = __devexit_p(orion_mdio_remove),
.remove = orion_mdio_remove,
.driver = {
.name = "orion-mdio",
.of_match_table = orion_mdio_match,
......
......@@ -635,7 +635,7 @@ static void mvneta_rxq_bm_disable(struct mvneta_port *pp,
/* Sets the RGMII Enable bit (RGMIIEn) in port MAC control register */
static void __devinit mvneta_gmac_rgmii_set(struct mvneta_port *pp, int enable)
static void mvneta_gmac_rgmii_set(struct mvneta_port *pp, int enable)
{
u32 val;
......@@ -650,7 +650,7 @@ static void __devinit mvneta_gmac_rgmii_set(struct mvneta_port *pp, int enable)
}
/* Config SGMII port */
static void __devinit mvneta_port_sgmii_config(struct mvneta_port *pp)
static void mvneta_port_sgmii_config(struct mvneta_port *pp)
{
u32 val;
......@@ -2564,7 +2564,7 @@ const struct ethtool_ops mvneta_eth_tool_ops = {
};
/* Initialize hw */
static int __devinit mvneta_init(struct mvneta_port *pp, int phy_addr)
static int mvneta_init(struct mvneta_port *pp, int phy_addr)
{
int queue;
......@@ -2613,9 +2613,8 @@ static void mvneta_deinit(struct mvneta_port *pp)
}
/* platform glue : initialize decoding windows */
static void __devinit
mvneta_conf_mbus_windows(struct mvneta_port *pp,
const struct mbus_dram_target_info *dram)
static void mvneta_conf_mbus_windows(struct mvneta_port *pp,
const struct mbus_dram_target_info *dram)
{
u32 win_enable;
u32 win_protect;
......@@ -2648,7 +2647,7 @@ mvneta_conf_mbus_windows(struct mvneta_port *pp,
}
/* Power up the port */
static void __devinit mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
static void mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
{
u32 val;
......@@ -2671,7 +2670,7 @@ static void __devinit mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
}
/* Device initialization routine */
static int __devinit mvneta_probe(struct platform_device *pdev)
static int mvneta_probe(struct platform_device *pdev)
{
const struct mbus_dram_target_info *dram_target_info;
struct device_node *dn = pdev->dev.of_node;
......@@ -2803,7 +2802,7 @@ static int __devinit mvneta_probe(struct platform_device *pdev)
}
/* Device removal routine */
static int __devexit mvneta_remove(struct platform_device *pdev)
static int mvneta_remove(struct platform_device *pdev)
{
struct net_device *dev = platform_get_drvdata(pdev);
struct mvneta_port *pp = netdev_priv(dev);
......@@ -2828,7 +2827,7 @@ MODULE_DEVICE_TABLE(of, mvneta_match);
static struct platform_driver mvneta_driver = {
.probe = mvneta_probe,
.remove = __devexit_p(mvneta_remove),
.remove = mvneta_remove,
.driver = {
.name = MVNETA_DRIVER_NAME,
.of_match_table = mvneta_match,
......
......@@ -341,7 +341,7 @@ static struct rtl_hal_cfg rtl8723ae_hal_cfg = {
.maps[RTL_RC_HT_RATEMCS15] = DESC92_RATEMCS15,
};
static struct pci_device_id rtl8723ae_pci_ids[] __devinitdata = {
static struct pci_device_id rtl8723ae_pci_ids[] = {
{RTL_PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8723, rtl8723ae_hal_cfg)},
{},
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment