Commit 04862d80 authored by Tony Lindgren's avatar Tony Lindgren

Revert "ARM: dts: DRA7: Add dt nodes for PWMSS"

This reverts commit 5fcc6730.

The binding may need to change pending related hwmod comments,
so reverting as requested by Paul Walmsley <paul@pwsan.com>.
parent 44a3ab68
...@@ -4,7 +4,6 @@ Required properties: ...@@ -4,7 +4,6 @@ Required properties:
- compatible: Must be "ti,<soc>-ehrpwm". - compatible: Must be "ti,<soc>-ehrpwm".
for am33xx - compatible = "ti,am33xx-ehrpwm"; for am33xx - compatible = "ti,am33xx-ehrpwm";
for da850 - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm"; for da850 - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
for dra7xx - compatible = "ti,dra7xx-ehrpwm", "ti,am33xx-ehrpwm";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
the cells format. The only third cell flag supported by this binding is the cells format. The only third cell flag supported by this binding is
PWM_POLARITY_INVERTED. PWM_POLARITY_INVERTED.
...@@ -28,10 +27,3 @@ ehrpwm0: ehrpwm@0 { /* EHRPWM on da850 */ ...@@ -28,10 +27,3 @@ ehrpwm0: ehrpwm@0 { /* EHRPWM on da850 */
#pwm-cells = <3>; #pwm-cells = <3>;
reg = <0x300000 0x2000>; reg = <0x300000 0x2000>;
}; };
ehrpwm0: ehrpwm@0 { /* EHRPWM on dra7xx */
compatible = "ti,dra7xx-ehrpwm", "ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48440200 0x80>;
ti,hwmods = "ehrpwm0";
};
TI SOC based PWM Subsystem TI SOC based PWM Subsystem
Required properties: Required properties:
- compatible: Must be "ti,<soc>-pwmss". - compatible: Must be "ti,am33xx-pwmss";
for am33xx - compatible = "ti,am33xx-pwmss"
for dra7xx - compatible = "ti,dra7xx-pwmss", "ti,am33xx-pwmss"
- reg: physical base address and size of the registers map. - reg: physical base address and size of the registers map.
- address-cells: Specify the number of u32 entries needed in child nodes. - address-cells: Specify the number of u32 entries needed in child nodes.
Should set to 1. Should set to 1.
...@@ -31,16 +29,3 @@ pwmss0: pwmss@48300000 { ...@@ -31,16 +29,3 @@ pwmss0: pwmss@48300000 {
/* child nodes go here */ /* child nodes go here */
}; };
epwmss0: epwmss@4843e000 { /* On DRA7xx */
compatible = "ti,dra7xx-pwmss", "ti,am33xx-pwmss";
reg = <0x4843e000 0x30>;
ti,hwmods = "epwmss0";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x4843e100 0x4843e100 0x80 /* ECAP */
0x4843e180 0x4843e180 0x80 /* EQEP */
0x4843e200 0x4843e200 0x80>; /* EHRPWM */
/* child nodes go here */
};
...@@ -1563,70 +1563,6 @@ hdmi: encoder@58060000 { ...@@ -1563,70 +1563,6 @@ hdmi: encoder@58060000 {
clock-names = "fck", "sys_clk"; clock-names = "fck", "sys_clk";
}; };
}; };
epwmss0: epwmss@4843e000 {
compatible = "ti,dra7xx-pwmss", "ti,am33xx-pwmss";
reg = <0x4843e000 0x30>;
ti,hwmods = "epwmss0";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
ranges = <0x4843e100 0x4843e100 0x80 /* ECAP */
0x4843e180 0x4843e180 0x80 /* EQEP */
0x4843e200 0x4843e200 0x80>;/* EHRPWM */
ehrpwm0: ehrpwm@4843e200 {
compatible = "ti,dra7xx-ehrpwm",
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x4843e200 0x80>;
ti,hwmods = "ehrpwm0";
status = "disabled";
};
};
epwmss1: epwmss@48440000 {
compatible = "ti,dra7xx-pwmss", "ti,am33xx-pwmss";
reg = <0x48440000 0x30>;
ti,hwmods = "epwmss1";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
ranges = <0x48440100 0x48440100 0x80 /* ECAP */
0x48440180 0x48440180 0x80 /* EQEP */
0x48440200 0x48440200 0x80>; /* EHRPWM */
ehrpwm1: ehrpwm@48440200 {
compatible = "ti,dra7xx-ehrpwm",
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48440200 0x80>;
ti,hwmods = "ehrpwm1";
status = "disabled";
};
};
epwmss2: epwmss@48442000 {
compatible = "ti,dra7xx-pwmss", "ti,am33xx-pwmss";
reg = <0x48442000 0x30>;
ti,hwmods = "epwmss2";
#address-cells = <1>;
#size-cells = <1>;
status = "disabled";
ranges = <0x48442100 0x48442100 0x80 /* ECAP */
0x48442180 0x48442180 0x80 /* EQEP */
0x48442200 0x48442200 0x80>; /* EHRPWM */
ehrpwm2: ehrpwm@48442200 {
compatible = "ti,dra7xx-ehrpwm",
"ti,am33xx-ehrpwm";
#pwm-cells = <3>;
reg = <0x48442200 0x80>;
ti,hwmods = "ehrpwm2";
status = "disabled";
};
};
}; };
thermal_zones: thermal-zones { thermal_zones: thermal-zones {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment