Commit 054814b8 authored by Arnd Bergmann's avatar Arnd Bergmann Committed by Lee Jones

mfd: tps65912: Move regmap config into core driver

When building with extra warnings enabled, most files including
linux/mfd/tps65912.h warn about a static variable defined in the
header:

include/linux/mfd/tps65912.h:331:35: warning: 'tps65912_regmap_config' defined but not used [-Wunused-const-variable=]

We also duplicate the data structure between the i2c and spi front-end
drivers. Moving it into the driver code avoids the warning and
the duplication.
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent bb63f7d3
......@@ -77,6 +77,23 @@ static struct regmap_irq_chip tps65912_irq_chip = {
.init_ack_masked = true,
};
static const struct regmap_range tps65912_yes_ranges[] = {
regmap_reg_range(TPS65912_INT_STS, TPS65912_GPIO5),
};
static const struct regmap_access_table tps65912_volatile_table = {
.yes_ranges = tps65912_yes_ranges,
.n_yes_ranges = ARRAY_SIZE(tps65912_yes_ranges),
};
const struct regmap_config tps65912_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.cache_type = REGCACHE_RBTREE,
.volatile_table = &tps65912_volatile_table,
};
EXPORT_SYMBOL_GPL(tps65912_regmap_config);
int tps65912_device_init(struct tps65912 *tps)
{
int ret;
......
......@@ -319,21 +319,7 @@ struct tps65912 {
struct regmap_irq_chip_data *irq_data;
};
static const struct regmap_range tps65912_yes_ranges[] = {
regmap_reg_range(TPS65912_INT_STS, TPS65912_GPIO5),
};
static const struct regmap_access_table tps65912_volatile_table = {
.yes_ranges = tps65912_yes_ranges,
.n_yes_ranges = ARRAY_SIZE(tps65912_yes_ranges),
};
static const struct regmap_config tps65912_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.cache_type = REGCACHE_RBTREE,
.volatile_table = &tps65912_volatile_table,
};
extern const struct regmap_config tps65912_regmap_config;
int tps65912_device_init(struct tps65912 *tps);
int tps65912_device_exit(struct tps65912 *tps);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment