Skip to content

L
linux
Commit 0707632b authored by yt.shen@mediatek.com's avatar yt.shen@mediatek.com Committed by CK Hu
Browse files
Options

drm/mediatek: update DSI sub driver flow for sending commands to panel 

This patch update enable/disable flow of DSI module.
Original flow works on there is a bridge chip: DSI -> bridge -> panel.
In this case: DSI -> panel, the DSI sub driver flow should be updated.
We need to initialize DSI first so that we can send commands to panel.
Signed-off-by: default avatarshaoming chen <shaoming.chen@mediatek.com>
Signed-off-by: default avatarYT Shen <yt.shen@mediatek.com>
Acked-by: default avatarCK Hu <ck.hu@mediatek.com>
parent 2d52bfba
Hide whitespace changes
Inline Side-by-side
Showing with 158 additions and 101 deletions
drivers/gpu/drm/mediatek/mtk_dsi.c
View file @ 0707632b
......@@ -126,6 +126,10 @@
#define CLK_HS_POST (0xff << 8)
#define CLK_HS_EXIT (0xff << 16)
#define DSI_VM_CMD_CON 0x130
#define VM_CMD_EN BIT(0)
#define TS_VFP_EN BIT(5)
#define DSI_CMDQ0 0x180
#define CONFIG (0xff << 0)
#define SHORT_PACKET 0
......@@ -239,85 +243,6 @@ static void mtk_dsi_reset_engine(struct mtk_dsi *dsi)
mtk_dsi_mask(dsi, DSI_CON_CTRL, DSI_RESET, 0);
}
static int mtk_dsi_poweron(struct mtk_dsi *dsi)
{
struct device *dev = dsi->dev;
int ret;
u64 pixel_clock, total_bits;
u32 htotal, htotal_bits, bit_per_pixel, overhead_cycles, overhead_bits;
if (++dsi->refcount != 1)
return 0;
switch (dsi->format) {
case MIPI_DSI_FMT_RGB565:
bit_per_pixel = 16;
break;
case MIPI_DSI_FMT_RGB666_PACKED:
bit_per_pixel = 18;
break;
case MIPI_DSI_FMT_RGB666:
case MIPI_DSI_FMT_RGB888:
default:
bit_per_pixel = 24;
break;
}
/**
* vm.pixelclock is in kHz, pixel_clock unit is Hz, so multiply by 1000
* htotal_time = htotal * byte_per_pixel / num_lanes
* overhead_time = lpx + hs_prepare + hs_zero + hs_trail + hs_exit
* mipi_ratio = (htotal_time + overhead_time) / htotal_time
* data_rate = pixel_clock * bit_per_pixel * mipi_ratio / num_lanes;
*/
pixel_clock = dsi->vm.pixelclock * 1000;
htotal = dsi->vm.hactive + dsi->vm.hback_porch + dsi->vm.hfront_porch +
dsi->vm.hsync_len;
htotal_bits = htotal * bit_per_pixel;
overhead_cycles = T_LPX + T_HS_PREP + T_HS_ZERO + T_HS_TRAIL +
T_HS_EXIT;
overhead_bits = overhead_cycles * dsi->lanes * 8;
total_bits = htotal_bits + overhead_bits;
dsi->data_rate = DIV_ROUND_UP_ULL(pixel_clock * total_bits,
htotal * dsi->lanes);
ret = clk_set_rate(dsi->hs_clk, dsi->data_rate);
if (ret < 0) {
dev_err(dev, "Failed to set data rate: %d\n", ret);
goto err_refcount;
}
phy_power_on(dsi->phy);
ret = clk_prepare_enable(dsi->engine_clk);
if (ret < 0) {
dev_err(dev, "Failed to enable engine clock: %d\n", ret);
goto err_phy_power_off;
}
ret = clk_prepare_enable(dsi->digital_clk);
if (ret < 0) {
dev_err(dev, "Failed to enable digital clock: %d\n", ret);
goto err_disable_engine_clk;
}
mtk_dsi_enable(dsi);
mtk_dsi_reset_engine(dsi);
mtk_dsi_phy_timconfig(dsi);
return 0;
err_disable_engine_clk:
clk_disable_unprepare(dsi->engine_clk);
err_phy_power_off:
phy_power_off(dsi->phy);
err_refcount:
dsi->refcount--;
return ret;
}
static void mtk_dsi_clk_ulp_mode_enter(struct mtk_dsi *dsi)
{
mtk_dsi_mask(dsi, DSI_PHY_LCCON, LC_HS_TX_EN, 0);
......@@ -365,16 +290,23 @@ static void mtk_dsi_set_mode(struct mtk_dsi *dsi)
u32 vid_mode = CMD_MODE;
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
vid_mode = SYNC_PULSE_MODE;
if ((dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) &&
!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE))
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
vid_mode = BURST_MODE;
else if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
vid_mode = SYNC_PULSE_MODE;
else
vid_mode = SYNC_EVENT_MODE;
}
writel(vid_mode, dsi->regs + DSI_MODE_CTRL);
}
static void mtk_dsi_set_vm_cmd(struct mtk_dsi *dsi)
{
mtk_dsi_mask(dsi, DSI_VM_CMD_CON, VM_CMD_EN, VM_CMD_EN);
mtk_dsi_mask(dsi, DSI_VM_CMD_CON, TS_VFP_EN, TS_VFP_EN);
}
static void mtk_dsi_ps_control_vact(struct mtk_dsi *dsi)
{
struct videomode *vm = &dsi->vm;
......@@ -512,6 +444,16 @@ static void mtk_dsi_start(struct mtk_dsi *dsi)
writel(1, dsi->regs + DSI_START);
}
static void mtk_dsi_stop(struct mtk_dsi *dsi)
{
writel(0, dsi->regs + DSI_START);
}
static void mtk_dsi_set_cmd_mode(struct mtk_dsi *dsi)
{
writel(CMD_MODE, dsi->regs + DSI_MODE_CTRL);
}
static void mtk_dsi_set_interrupt_enable(struct mtk_dsi *dsi)
{
u32 inten = LPRX_RD_RDY_INT_FLAG | CMD_DONE_INT_FLAG | VM_DONE_INT_FLAG;
......@@ -570,6 +512,116 @@ static irqreturn_t mtk_dsi_irq(int irq, void *dev_id)
return IRQ_HANDLED;
}
static s32 mtk_dsi_switch_to_cmd_mode(struct mtk_dsi *dsi, u8 irq_flag, u32 t)
{
mtk_dsi_irq_data_clear(dsi, irq_flag);
mtk_dsi_set_cmd_mode(dsi);
if (!mtk_dsi_wait_for_irq_done(dsi, irq_flag, t)) {
DRM_ERROR("failed to switch cmd mode\n");
return -ETIME;
} else {
return 0;
}
}
static int mtk_dsi_poweron(struct mtk_dsi *dsi)
{
struct device *dev = dsi->dev;
int ret;
u64 pixel_clock, total_bits;
u32 htotal, htotal_bits, bit_per_pixel, overhead_cycles, overhead_bits;
if (++dsi->refcount != 1)
return 0;
switch (dsi->format) {
case MIPI_DSI_FMT_RGB565:
bit_per_pixel = 16;
break;
case MIPI_DSI_FMT_RGB666_PACKED:
bit_per_pixel = 18;
break;
case MIPI_DSI_FMT_RGB666:
case MIPI_DSI_FMT_RGB888:
default:
bit_per_pixel = 24;
break;
}
/**
* vm.pixelclock is in kHz, pixel_clock unit is Hz, so multiply by 1000
* htotal_time = htotal * byte_per_pixel / num_lanes
* overhead_time = lpx + hs_prepare + hs_zero + hs_trail + hs_exit
* mipi_ratio = (htotal_time + overhead_time) / htotal_time
* data_rate = pixel_clock * bit_per_pixel * mipi_ratio / num_lanes;
*/
pixel_clock = dsi->vm.pixelclock * 1000;
htotal = dsi->vm.hactive + dsi->vm.hback_porch + dsi->vm.hfront_porch +
dsi->vm.hsync_len;
htotal_bits = htotal * bit_per_pixel;
overhead_cycles = T_LPX + T_HS_PREP + T_HS_ZERO + T_HS_TRAIL +
T_HS_EXIT;
overhead_bits = overhead_cycles * dsi->lanes * 8;
total_bits = htotal_bits + overhead_bits;
dsi->data_rate = DIV_ROUND_UP_ULL(pixel_clock * total_bits,
htotal * dsi->lanes);
ret = clk_set_rate(dsi->hs_clk, dsi->data_rate);
if (ret < 0) {
dev_err(dev, "Failed to set data rate: %d\n", ret);
goto err_refcount;
}
phy_power_on(dsi->phy);
ret = clk_prepare_enable(dsi->engine_clk);
if (ret < 0) {
dev_err(dev, "Failed to enable engine clock: %d\n", ret);
goto err_phy_power_off;
}
ret = clk_prepare_enable(dsi->digital_clk);
if (ret < 0) {
dev_err(dev, "Failed to enable digital clock: %d\n", ret);
goto err_disable_engine_clk;
}
mtk_dsi_enable(dsi);
mtk_dsi_reset_engine(dsi);
mtk_dsi_phy_timconfig(dsi);
mtk_dsi_rxtx_control(dsi);
mtk_dsi_ps_control_vact(dsi);
mtk_dsi_set_vm_cmd(dsi);
mtk_dsi_config_vdo_timing(dsi);
mtk_dsi_set_interrupt_enable(dsi);
mtk_dsi_clk_ulp_mode_leave(dsi);
mtk_dsi_lane0_ulp_mode_leave(dsi);
mtk_dsi_clk_hs_mode(dsi, 0);
if (dsi->panel) {
if (drm_panel_prepare(dsi->panel)) {
DRM_ERROR("failed to prepare the panel\n");
goto err_disable_digital_clk;
}
}
return 0;
err_disable_digital_clk:
clk_disable_unprepare(dsi->digital_clk);
err_disable_engine_clk:
clk_disable_unprepare(dsi->engine_clk);
err_phy_power_off:
phy_power_off(dsi->phy);
err_refcount:
dsi->refcount--;
return ret;
}
static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
{
if (WARN_ON(dsi->refcount == 0))
......@@ -578,6 +630,16 @@ static void mtk_dsi_poweroff(struct mtk_dsi *dsi)
if (--dsi->refcount != 0)
return;
if (!mtk_dsi_switch_to_cmd_mode(dsi, VM_DONE_INT_FLAG, 500)) {
if (dsi->panel) {
if (drm_panel_unprepare(dsi->panel)) {
DRM_ERROR("failed to unprepare the panel\n");
return;
}
}
}
mtk_dsi_reset_engine(dsi);
mtk_dsi_lane0_ulp_mode_enter(dsi);
mtk_dsi_clk_ulp_mode_enter(dsi);
......@@ -596,36 +658,30 @@ static void mtk_output_dsi_enable(struct mtk_dsi *dsi)
if (dsi->enabled)
return;
if (dsi->panel) {
if (drm_panel_prepare(dsi->panel)) {
DRM_ERROR("failed to setup the panel\n");
return;
}
}
ret = mtk_dsi_poweron(dsi);
if (ret < 0) {
DRM_ERROR("failed to power on dsi\n");
return;
}
mtk_dsi_rxtx_control(dsi);
mtk_dsi_clk_ulp_mode_leave(dsi);
mtk_dsi_lane0_ulp_mode_leave(dsi);
mtk_dsi_clk_hs_mode(dsi, 0);
mtk_dsi_set_mode(dsi);
mtk_dsi_ps_control_vact(dsi);
mtk_dsi_config_vdo_timing(dsi);
mtk_dsi_set_interrupt_enable(dsi);
mtk_dsi_set_mode(dsi);
mtk_dsi_clk_hs_mode(dsi, 1);
mtk_dsi_start(dsi);
if (dsi->panel) {
if (drm_panel_enable(dsi->panel)) {
DRM_ERROR("failed to enable the panel\n");
goto err_dsi_power_off;
}
}
dsi->enabled = true;
return;
err_dsi_power_off:
mtk_dsi_stop(dsi);
mtk_dsi_poweroff(dsi);
}
static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
......@@ -640,6 +696,7 @@ static void mtk_output_dsi_disable(struct mtk_dsi *dsi)
}
}
mtk_dsi_stop(dsi);
mtk_dsi_poweroff(dsi);
dsi->enabled = false;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7