Commit 0807dd03 authored by Linus Torvalds's avatar Linus Torvalds

Merge http://linux-isdn.bkbits.net/linux-2.5.isdn

into home.transmeta.com:/home/torvalds/v2.5/linux
parents e170a233 262b7e76
......@@ -39,6 +39,6 @@ obj-$(CONFIG_PHONE) += telephony/
obj-$(CONFIG_MD) += md/
obj-$(CONFIG_BLUEZ) += bluetooth/
obj-$(CONFIG_HOTPLUG_PCI) += hotplug/
obj-$(CONFIG_ISDN) += isdn/
obj-$(CONFIG_ISDN_BOOL) += isdn/
include $(TOPDIR)/Rules.make
......@@ -2,5 +2,5 @@
# Config.in for IBM Active 2000 ISDN driver
#
dep_tristate 'IBM Active 2000 support' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN
dep_tristate 'IBM Active 2000 support' CONFIG_ISDN_DRV_ACT2000 $CONFIG_ISDN $CONFIG_ISA
......@@ -2972,7 +2972,7 @@ idi_send_data(eicon_card *card, eicon_chan *chan, int ack, struct sk_buff *skb,
spin_unlock_irqrestore(&eicon_lock, flags);
eicon_log(card, 1, "idi_err: Ch%d: alloc_skb failed in send_data()\n", chan->No);
if (xmit_skb)
dev_kfree_skb(skb);
dev_kfree_skb(xmit_skb);
if (skb2)
dev_kfree_skb(skb2);
return -ENOMEM;
......
......@@ -8,12 +8,12 @@ comment 'Drivers for active AVM cards'
bool 'Support AVM cards' CONFIG_CAPI_AVM
if [ "$CONFIG_CAPI_AVM" != "n" ]; then
dep_tristate ' AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA $CONFIG_ISDN_CAPI
dep_tristate ' AVM B1 ISA support' CONFIG_ISDN_DRV_AVMB1_B1ISA $CONFIG_ISDN_CAPI $CONFIG_SA
dep_tristate ' AVM B1 PCI support' CONFIG_ISDN_DRV_AVMB1_B1PCI $CONFIG_ISDN_CAPI $CONFIG_PCI
dep_mbool ' AVM B1 PCI V4 support' CONFIG_ISDN_DRV_AVMB1_B1PCIV4 $CONFIG_ISDN_DRV_AVMB1_B1PCI
dep_tristate ' AVM T1/T1-B ISA support' CONFIG_ISDN_DRV_AVMB1_T1ISA $CONFIG_ISDN_CAPI
dep_tristate ' AVM T1/T1-B ISA support' CONFIG_ISDN_DRV_AVMB1_T1ISA $CONFIG_ISDN_CAPI $CONFIG_ISA
dep_tristate ' AVM B1/M1/M2 PCMCIA support' CONFIG_ISDN_DRV_AVMB1_B1PCMCIA $CONFIG_ISDN_CAPI
......
......@@ -211,7 +211,7 @@ static int b1pciv4_probe(struct capicardparams *p, struct pci_dev *pdev)
goto err_free_dma;
}
card->mbase = ioremap_nocache(card->membase, 64);
card->mbase = ioremap(card->membase, 64);
if (!card->mbase) {
printk(KERN_NOTICE "b1pci: can't remap memory at 0x%lx\n",
card->membase);
......
......@@ -1129,7 +1129,7 @@ static int c4_add_card(struct capicardparams *p, struct pci_dev *dev,
goto err_free_dma;
}
card->mbase = ioremap_nocache(card->membase, 128);
card->mbase = ioremap(card->membase, 128);
if (card->mbase == 0) {
printk(KERN_NOTICE "c4: can't remap memory at 0x%lx\n",
card->membase);
......
......@@ -79,7 +79,7 @@ static int t1pci_add_card(struct capicardparams *p, struct pci_dev *pdev)
goto err_free_dma;
}
card->mbase = ioremap_nocache(card->membase, 64);
card->mbase = ioremap(card->membase, 64);
if (!card->mbase) {
printk(KERN_NOTICE "t1pci: can't remap memory at 0x%lx\n",
card->membase);
......
......@@ -251,6 +251,10 @@ CONFIG_HISAX_SEDLBAUER_CS
This enables the PCMCIA client driver for the Sedlbauer Speed Star
and Speed Star II cards.
CONFIG_HISAX_AVM_A1_CS
This enables the PCMCIA client driver for the AVM A1 / Fritz!Card
PCMCIA cards.
CONFIG_HISAX_ST5481
This enables the driver for ST5481 based USB ISDN adapters,
e.g. the BeWan Gazel 128 USB
......
......@@ -14,28 +14,28 @@ if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
bool ' HiSax Support for US NI1' CONFIG_HISAX_NI1
int ' Maximum number of cards supported by HiSax' CONFIG_HISAX_MAX_CARDS 8
comment ' HiSax supported cards'
bool ' Teles 16.0/8.0' CONFIG_HISAX_16_0
bool ' Teles 16.0/8.0' CONFIG_HISAX_16_0 $CONFIG_ISA
bool ' Teles 16.3 or PNP or PCMCIA' CONFIG_HISAX_16_3
bool ' Teles PCI' CONFIG_HISAX_TELESPCI
bool ' Teles S0Box' CONFIG_HISAX_S0BOX
bool ' AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1
bool ' AVM A1 (Fritz)' CONFIG_HISAX_AVM_A1 $CONFIG_ISA
bool ' AVM PnP/PCI (Fritz!PnP/PCI)' CONFIG_HISAX_FRITZPCI
bool ' AVM A1 PCMCIA (Fritz)' CONFIG_HISAX_AVM_A1_PCMCIA
bool ' Elsa cards' CONFIG_HISAX_ELSA
bool ' ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2
bool ' ITK ix1-micro Revision 2' CONFIG_HISAX_IX1MICROR2 $CONFIG_ISA
bool ' Eicon.Diehl Diva cards' CONFIG_HISAX_DIEHLDIVA
bool ' ASUSCOM ISA cards' CONFIG_HISAX_ASUSCOM
bool ' TELEINT cards' CONFIG_HISAX_TELEINT
bool ' HFC-S based cards' CONFIG_HISAX_HFCS
bool ' ASUSCOM ISA cards' CONFIG_HISAX_ASUSCOM $CONFIG_ISA
bool ' TELEINT cards' CONFIG_HISAX_TELEINT $CONFIG_ISA
bool ' HFC-S based cards' CONFIG_HISAX_HFCS $CONFIG_ISA
bool ' Sedlbauer cards' CONFIG_HISAX_SEDLBAUER
bool ' USR Sportster internal TA' CONFIG_HISAX_SPORTSTER
bool ' MIC card' CONFIG_HISAX_MIC
bool ' USR Sportster internal TA' CONFIG_HISAX_SPORTSTER $CONFIG_ISA
bool ' MIC card' CONFIG_HISAX_MIC $CONFIG_ISA
bool ' NETjet card' CONFIG_HISAX_NETJET
bool ' NETspider U card' CONFIG_HISAX_NETJET_U
bool ' Niccy PnP/PCI card' CONFIG_HISAX_NICCY
bool ' Siemens I-Surf card' CONFIG_HISAX_ISURF
bool ' HST Saphir card' CONFIG_HISAX_HSTSAPHIR
bool ' Telekom A4T card' CONFIG_HISAX_BKM_A4T
bool ' Siemens I-Surf card' CONFIG_HISAX_ISURF $CONFIG_ISA
bool ' HST Saphir card' CONFIG_HISAX_HSTSAPHIR $CONFIG_ISA
bool ' Telekom A4T card' CONFIG_HISAX_BKM_A4T
bool ' Scitel Quadro card' CONFIG_HISAX_SCT_QUADRO
bool ' Gazel cards' CONFIG_HISAX_GAZEL
bool ' HFC PCI-Bus cards' CONFIG_HISAX_HFC_PCI
......@@ -52,6 +52,7 @@ if [ "$CONFIG_ISDN_DRV_HISAX" != "n" ]; then
dep_tristate 'Sedlbauer PCMCIA cards' CONFIG_HISAX_SEDLBAUER_CS $CONFIG_ISDN_DRV_HISAX $CONFIG_PCMCIA
dep_tristate 'ELSA PCMCIA MicroLink cards' CONFIG_HISAX_ELSA_CS $CONFIG_ISDN_DRV_HISAX $CONFIG_PCMCIA
dep_tristate 'AVM A1 PCMCIA cards' CONFIG_HISAX_AVM_A1_CS $CONFIG_ISDN_DRV_HISAX $CONFIG_PCMCIA
dep_tristate 'ST5481 USB ISDN modem (EXPERIMENTAL)' CONFIG_HISAX_ST5481 $CONFIG_ISDN_DRV_HISAX $CONFIG_USB $CONFIG_EXPERIMENTAL
dep_tristate 'AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)' CONFIG_HISAX_FRITZ_PCIPNP $CONFIG_ISDN_DRV_HISAX $CONFIG_EXPERIMENTAL
dep_tristate 'AVM Fritz!Card classic support (EXPERIMENTAL)' CONFIG_HISAX_FRITZ_CLASSIC $CONFIG_ISDN_DRV_HISAX $CONFIG_EXPERIMENTAL
......
......@@ -13,6 +13,7 @@ export-objs := config.o hisax_isac.o hisax_hscx.o
obj-$(CONFIG_ISDN_DRV_HISAX) += hisax.o
obj-$(CONFIG_HISAX_SEDLBAUER_CS) += sedlbauer_cs.o
obj-$(CONFIG_HISAX_ELSA_CS) += elsa_cs.o
obj-$(CONFIG_HISAX_AVM_A1_CS) += avma1_cs.o
obj-$(CONFIG_HISAX_ST5481) += hisax_st5481.o
obj-$(CONFIG_HISAX_FRITZ_PCIPNP) += hisax_isac.o hisax_fcpcipnp.o
obj-$(CONFIG_HISAX_FRITZ_CLASSIC) += hisax_isac.o hisax_hscx.o hisax_fcclassic.o
......
This diff is collapsed.
......@@ -2,4 +2,4 @@
# Config.in for ICN ISDN driver
#
dep_tristate 'ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN
dep_tristate 'ICN 2B and 4B support' CONFIG_ISDN_DRV_ICN $CONFIG_ISDN $CONFIG_ISA
......@@ -2,4 +2,4 @@
# Config.in for PCBIT ISDN driver
#
dep_tristate 'PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN
dep_tristate 'PCBIT-D support' CONFIG_ISDN_DRV_PCBIT $CONFIG_ISDN $CONFIG_ISA
......@@ -12,6 +12,8 @@
#ifndef PCBIT_H
#define PCBIT_H
#include <linux/tqueue.h>
#define MAX_PCBIT_CARDS 4
......
......@@ -2,4 +2,4 @@
# Config.in for Spellcaster ISDN driver
#
dep_tristate 'Spellcaster support' CONFIG_ISDN_DRV_SC $CONFIG_ISDN
dep_tristate 'Spellcaster support' CONFIG_ISDN_DRV_SC $CONFIG_ISDN $CONFIG_ISA
......@@ -16,6 +16,7 @@
#include <linux/isdnif.h>
#include <linux/init.h>
#include <linux/tqueue.h>
/* Maximum number of channels for this board */
#define TPAM_NBCHANNEL 30
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment