arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon

New bindings impose to declare the thermal IP from within a new syscon.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

arch/arm64/boot/dts/marvell/armada-ap806.dtsi

@@ -247,10 +247,16 @@ ap_gpio: gpio@1040 {
 				};
 			};
 
-			ap_thermal: thermal@6f808c {
-				compatible = "marvell,armada-ap806-thermal";
-				reg = <0x6f808c 0x4>,
-				      <0x6f8084 0x8>;
+			ap_syscon1: system-controller@6f8000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x6f8000 0x1000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				ap_thermal: thermal-sensor@80 {
+					compatible = "marvell,armada-ap806-thermal";
+					reg = <0x80 0x10>;
+				};
 			};
 		};
 	};

arch/arm64/boot/dts/marvell/armada-cp110.dtsi

@@ -162,12 +162,6 @@ CP110_LABEL(rtc): rtc@284000 {
 			interrupts = <ICU_GRP_NSR 77 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		CP110_LABEL(thermal): thermal@400078 {
-			compatible = "marvell,armada-cp110-thermal";
-			reg = <0x400078 0x4>,
-			<0x400070 0x8>;
-		};
-
 		CP110_LABEL(syscon0): system-controller@440000 {
 			compatible = "syscon", "simple-mfd";
 			reg = <0x440000 0x2000>;
@@ -208,6 +202,18 @@ CP110_LABEL(gpio2): gpio@140 {
 			};
 		};
 
+		CP110_LABEL(syscon1): system-controller@400000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0x400000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			CP110_LABEL(thermal): thermal-sensor@70 {
+				compatible = "marvell,armada-cp110-thermal";
+				reg = <0x70 0x10>;
+			};
+		};
+
 		CP110_LABEL(usb3_0): usb3@500000 {
 			compatible = "marvell,armada-8k-xhci",
 			"generic-xhci";