kernel: remove CONFIG_USE_GENERIC_SMP_HELPERS

We've switched over every architecture that supports SMP to it, so
remove the new useless config variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch/Kconfig

@@ -207,9 +207,6 @@ config HAVE_DMA_ATTRS
 config HAVE_DMA_CONTIGUOUS
 	bool
 
-config USE_GENERIC_SMP_HELPERS
-	bool
-
 config GENERIC_SMP_IDLE_THREAD
        bool
 

arch/alpha/Kconfig

@@ -522,7 +522,6 @@ config ARCH_MAY_HAVE_PC_FDC
 config SMP
 	bool "Symmetric multi-processing support"
 	depends on ALPHA_SABLE || ALPHA_LYNX || ALPHA_RAWHIDE || ALPHA_DP264 || ALPHA_WILDFIRE || ALPHA_TITAN || ALPHA_GENERIC || ALPHA_SHARK || ALPHA_MARVEL
-	select USE_GENERIC_SMP_HELPERS
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If

arch/arc/Kconfig

@@ -125,7 +125,6 @@ config ARC_PLAT_NEEDS_CPU_TO_DMA
 config SMP
 	bool "Symmetric Multi-Processing (Incomplete)"
 	default n
-	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If

arch/arm/Kconfig

@@ -1432,7 +1432,6 @@ config SMP
 	depends on GENERIC_CLOCKEVENTS
 	depends on HAVE_SMP
 	depends on MMU || ARM_MPU
-	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If

arch/arm64/Kconfig

@@ -143,7 +143,6 @@ config CPU_BIG_ENDIAN
 
 config SMP
 	bool "Symmetric Multi-Processing"
-	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU.  If
 	  you say N here, the kernel will run on single and

arch/blackfin/Kconfig

@@ -34,7 +34,6 @@ config BLACKFIN
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_ATOMIC64
 	select GENERIC_IRQ_PROBE
-	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_NMI_WATCHDOG if NMI_WATCHDOG
 	select GENERIC_SMP_IDLE_THREAD
 	select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS

arch/hexagon/Kconfig

@@ -4,7 +4,6 @@ comment "Linux Kernel Configuration for Hexagon"
 config HEXAGON
 	def_bool y
 	select HAVE_OPROFILE
-	select USE_GENERIC_SMP_HELPERS if SMP
 	# Other pending projects/to-do items.
 	# select HAVE_REGS_AND_STACK_ACCESS_API
 	# select HAVE_HW_BREAKPOINT if PERF_EVENTS

arch/ia64/Kconfig

@@ -343,7 +343,6 @@ config FORCE_MAX_ZONEORDER
 
 config SMP
 	bool "Symmetric multi-processing support"
-	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N.  If you have a system with more

arch/m32r/Kconfig

@@ -275,7 +275,6 @@ source "kernel/Kconfig.preempt"
 
 config SMP
 	bool "Symmetric multi-processing support"
-	select USE_GENERIC_SMP_HELPERS
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If

arch/metag/Kconfig

@@ -111,7 +111,6 @@ config METAG_META21
 config SMP
 	bool "Symmetric multi-processing support"
 	depends on METAG_META21 && METAG_META21_MMU
-	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one thread running
 	  Linux. If you have a system with only one thread running Linux,

arch/mips/Kconfig

@@ -2125,7 +2125,6 @@ source "mm/Kconfig"
 config SMP
 	bool "Multi-Processing support"
 	depends on SYS_SUPPORTS_SMP
-	select USE_GENERIC_SMP_HELPERS
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If

arch/mn10300/Kconfig

@@ -181,7 +181,6 @@ endmenu
 config SMP
 	bool "Symmetric multi-processing support"
 	default y
-	select USE_GENERIC_SMP_HELPERS
 	depends on MN10300_PROC_MN2WS0038 || MN10300_PROC_MN2WS0050
 	---help---
 	  This enables support for systems with more than one CPU. If you have

arch/parisc/Kconfig

@@ -226,7 +226,6 @@ endchoice
 
 config SMP
 	bool "Symmetric multi-processing support"
-	select USE_GENERIC_SMP_HELPERS
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If

arch/powerpc/Kconfig

@@ -106,7 +106,6 @@ config PPC
 	select HAVE_MEMBLOCK_NODE_MAP
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
-	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_OPROFILE
 	select HAVE_DEBUG_KMEMLEAK
 	select GENERIC_ATOMIC64 if PPC32

arch/s390/Kconfig

@@ -141,7 +141,6 @@ config S390
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
 	select SYSCTL_EXCEPTION_TRACE
-	select USE_GENERIC_SMP_HELPERS if SMP
 	select VIRT_CPU_ACCOUNTING
 	select VIRT_TO_BUS
 

arch/sh/Kconfig

@@ -711,7 +711,6 @@ config CC_STACKPROTECTOR
 config SMP
 	bool "Symmetric multi-processing support"
 	depends on SYS_SUPPORTS_SMP
-	select USE_GENERIC_SMP_HELPERS
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If

arch/sparc/Kconfig

@@ -28,7 +28,6 @@ config SPARC
 	select HAVE_ARCH_JUMP_LABEL
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
-	select USE_GENERIC_SMP_HELPERS if SMP
 	select GENERIC_PCI_IOMAP
 	select HAVE_NMI_WATCHDOG if SPARC64
 	select HAVE_BPF_JIT

arch/tile/Kconfig

@@ -8,7 +8,6 @@ config TILE
 	select HAVE_KVM if !TILEGX
 	select GENERIC_FIND_FIRST_BIT
 	select SYSCTL_EXCEPTION_TRACE
-	select USE_GENERIC_SMP_HELPERS
 	select CC_OPTIMIZE_FOR_SIZE
 	select HAVE_DEBUG_KMEMLEAK
 	select GENERIC_IRQ_PROBE

arch/x86/Kconfig

@@ -90,7 +90,6 @@ config X86
 	select GENERIC_IRQ_SHOW
 	select GENERIC_CLOCKEVENTS_MIN_ADJUST
 	select IRQ_FORCED_THREADING
-	select USE_GENERIC_SMP_HELPERS if SMP
 	select HAVE_BPF_JIT if X86_64
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select CLKEVT_I8253

block/blk-mq.c

@@ -319,7 +319,7 @@ void __blk_mq_end_io(struct request *rq, int error)
 		blk_mq_complete_request(rq, error);
 }
 
-#if defined(CONFIG_SMP) && defined(CONFIG_USE_GENERIC_SMP_HELPERS)
+#if defined(CONFIG_SMP)
 
 /*
  * Called with interrupts disabled.
@@ -361,7 +361,7 @@ static int ipi_remote_cpu(struct blk_mq_ctx *ctx, const int cpu,
 
 	return true;
 }
-#else /* CONFIG_SMP && CONFIG_USE_GENERIC_SMP_HELPERS */
+#else /* CONFIG_SMP */
 static int ipi_remote_cpu(struct blk_mq_ctx *ctx, const int cpu,
 			  struct request *rq, const int error)
 {

block/blk-softirq.c

@@ -36,7 +36,7 @@ static void blk_done_softirq(struct softirq_action *h)
 	}
 }
 
-#if defined(CONFIG_SMP) && defined(CONFIG_USE_GENERIC_SMP_HELPERS)
+#ifdef CONFIG_SMP
 static void trigger_softirq(void *data)
 {
 	struct request *rq = data;
@@ -71,7 +71,7 @@ static int raise_blk_irq(int cpu, struct request *rq)
 
 	return 1;
 }
-#else /* CONFIG_SMP && CONFIG_USE_GENERIC_SMP_HELPERS */
+#else /* CONFIG_SMP */
 static int raise_blk_irq(int cpu, struct request *rq)
 {
 	return 1;

block/blk-sysfs.c

@@ -288,7 +288,7 @@ static ssize_t
 queue_rq_affinity_store(struct request_queue *q, const char *page, size_t count)
 {
 	ssize_t ret = -EINVAL;
-#if defined(CONFIG_USE_GENERIC_SMP_HELPERS)
+#ifdef CONFIG_SMP
 	unsigned long val;
 
 	ret = queue_var_store(&val, page, count);

include/linux/smp.h

@@ -106,14 +106,10 @@ void kick_all_cpus_sync(void);
 /*
  * Generic and arch helpers
  */
-#ifdef CONFIG_USE_GENERIC_SMP_HELPERS
 void __init call_function_init(void);
 void generic_smp_call_function_single_interrupt(void);
 #define generic_smp_call_function_interrupt \
 	generic_smp_call_function_single_interrupt
-#else
-static inline void call_function_init(void) { }
-#endif
 
 /*
  * Mark the boot cpu "online" so that it can call console drivers in

kernel/Kconfig.hz

@@ -55,4 +55,4 @@ config HZ
 	default 1000 if HZ_1000
 
 config SCHED_HRTICK
-	def_bool HIGH_RES_TIMERS && (!SMP || USE_GENERIC_SMP_HELPERS)
+	def_bool HIGH_RES_TIMERS

kernel/smp.c

@@ -15,7 +15,6 @@
 
 #include "smpboot.h"
 
-#ifdef CONFIG_USE_GENERIC_SMP_HELPERS
 enum {
 	CSD_FLAG_LOCK		= 0x01,
 	CSD_FLAG_WAIT		= 0x02,
@@ -464,7 +463,6 @@ int smp_call_function(smp_call_func_t func, void *info, int wait)
 	return 0;
 }
 EXPORT_SYMBOL(smp_call_function);
-#endif /* USE_GENERIC_SMP_HELPERS */
 
 /* Setup configured maximum number of CPUs to activate */
 unsigned int setup_max_cpus = NR_CPUS;