Commit 0aa052ce authored by Dan Haab's avatar Dan Haab Committed by Florian Fainelli

ARM: dts: BCM53573: Add DT for Luxul XAP-810

This is BCM53573 WiSoC based access point with an extra BCM43217 chipset
used for 2.4 GHz.
Signed-off-by: default avatarDan Haab <dhaab@luxul.com>
Acked-by: default avatarRafał Miłecki <rafal@milecki.pl>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
parent 65f78c4c
...@@ -110,6 +110,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \ ...@@ -110,6 +110,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm953012hr.dtb \ bcm953012hr.dtb \
bcm953012k.dtb bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_53573) += \ dtb-$(CONFIG_ARCH_BCM_53573) += \
bcm47189-luxul-xap-810.dtb \
bcm47189-tenda-ac9.dtb \ bcm47189-tenda-ac9.dtb \
bcm947189acdbmr.dtb bcm947189acdbmr.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \ dtb-$(CONFIG_ARCH_BCM_63XX) += \
......
/*
* Copyright 2017 Luxul Inc.
*
* Licensed under the ISC license.
*/
/dts-v1/;
#include "bcm53573.dtsi"
/ {
compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573";
model = "Luxul XAP-810 V1";
chosen {
bootargs = "earlycon";
};
memory {
reg = <0x00000000 0x08000000>;
};
leds {
compatible = "gpio-leds";
5ghz {
label = "bcm53xx:blue:5ghz";
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
system {
label = "bcm53xx:green:system";
gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
};
pcie0_leds {
compatible = "gpio-leds";
2ghz {
label = "bcm53xx:blue:2ghz";
gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "default-off";
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
restart {
label = "Reset";
linux,code = <KEY_RESTART>;
gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
};
};
};
&pcie0 {
ranges = <0x00000000 0 0 0 0 0x00100000>;
#address-cells = <3>;
#size-cells = <2>;
bridge@0,0,0 {
reg = <0x0000 0 0 0 0>;
ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
#address-cells = <3>;
#size-cells = <2>;
wifi@0,1,0 {
reg = <0x0000 0 0 0 0>;
ranges = <0x00000000 0 0 0 0x00100000>;
#address-cells = <1>;
#size-cells = <1>;
pcie0_chipcommon: chipcommon@0 {
reg = <0 0x1000>;
gpio-controller;
#gpio-cells = <2>;
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment