Merge tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset changes from Sebastian Reichel:
 "New chip/feature support:
   - bq27xxx: support updating battery config from DT
   - bq24190: support loading battery charge info from DT
   - LTC2941: add LTC2942/LTC2944 support
   - max17042: add ACPI support
   - max1721x: new driver

  Misc:
   - Move bq27xxx w1 driver from w1 into power-supply subsystem
   - Introduce power_supply_set_input_current_limit_from_supplier
   - constify stuff
   - some minor fixes"

* tag 'for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (39 commits)
  power: supply: bq27xxx: enable writing capacity values for bq27421
  power: supply: bq24190_charger: Get input_current_limit from our supplier
  power: supply: bq24190_charger: Export 5V boost converter as regulator
  power: supply: bq24190_charger: Add power_supply_battery_info support
  power: supply: bq24190_charger: Add property system-minimum-microvolt
  power: supply: bq24190_charger: Enable devicetree config
  dt-bindings: power: supply: Add docs for TI BQ24190 battery charger
  power: supply: bq27xxx: Remove duplicate chip data arrays
  power: supply: bq27xxx: Enable data memory update for certain chips
  power: supply: bq27xxx: Add chip IDs for previously shadowed chips
  power: supply: bq27xxx: Create single chip data table
  power: supply: bq24190_charger: Add ti,bq24192i to devicetree table
  power: supply: bq24190_charger: Add input_current_limit property
  power: supply: Add power_supply_set_input_current_limit_from_supplier helper
  power: supply: max17042_battery: Fix compiler warning
  power: supply: core: Delete two error messages for a failed memory allocation in power_supply_check_supplies()
  power: supply: make device_attribute const
  power: supply: max17042_battery: Fix ACPI interrupt issues
  power: supply: max17042_battery: Add support for ACPI enumeration
  power: supply: lp8788: Make several arrays static const * const
  ...

Documentation/devicetree/bindings/power/supply/bq24190.txt

+TI BQ24190 Li-Ion Battery Charger
+
+Required properties:
+- compatible: contains one of the following:
+    * "ti,bq24190"
+    * "ti,bq24192i"
+- reg: integer, I2C address of the charger.
+- interrupts[-extended]: configuration for charger INT pin.
+
+Optional properties:
+- monitored-battery: phandle of battery characteristics devicetree node
+  The charger uses the following battery properties:
+    + precharge-current-microamp: maximum charge current during precharge
+      phase (typically 20% of battery capacity).
+    + charge-term-current-microamp: a charge cycle terminates when the
+      battery voltage is above recharge threshold, and the current is below
+      this setting (typically 10% of battery capacity).
+  See also Documentation/devicetree/bindings/power/supply/battery.txt
+- ti,system-minimum-microvolt: when power is connected and the battery is below
+  minimum system voltage, the system will be regulated above this setting.
+
+Notes:
+- Some circuit boards wire the chip's "OTG" pin high (enabling 500mA default
+  charge current on USB SDP ports, among other features). To simulate this on
+  boards that wire the pin to a GPIO, set a gpio-hog.
+
+Example:
+
+	bat: battery {
+		compatible = "simple-battery";
+		precharge-current-microamp = <256000>;
+		charge-term-current-microamp = <128000>;
+		// etc.
+	};
+
+	bq24190: charger@6a {
+		compatible = "ti,bq24190";
+		reg = <0x6a>;
+		interrupts-extended = <&gpiochip 10 IRQ_TYPE_EDGE_FALLING>;
+		monitored-battery = <&bat>;
+		ti,system-minimum-microvolt = <3200000>;
+	};
+
+	&twl_gpio {
+		otg {
+			gpio-hog;
+			gpios = <6 0>;
+			output-high;
+			line-name = "otg-gpio";
+		};
+	};

Documentation/devicetree/bindings/power/supply/ltc2941.txt

-binding for LTC2941 and LTC2943 battery gauges
+binding for LTC2941, LTC2942, LTC2943 and LTC2944 battery gauges
 
-Both the LTC2941 and LTC2943 measure battery capacity.
-The LTC2943 is compatible with the LTC2941, it adds voltage and
-temperature monitoring, and uses a slightly different conversion
-formula for the charge counter.
+All chips measure battery capacity.
+The LTC2942 is pin compatible with the LTC2941, it adds voltage and
+temperature monitoring, and is runtime detected. LTC2943 and LTC2944
+is software compatible, uses a slightly different conversion formula
+for the charge counter and adds voltage, current and temperature monitoring.
 
 Required properties:
-- compatible: Should contain "lltc,ltc2941" or "lltc,ltc2943" which also
-    indicates the type of I2C chip attached.
+- compatible: Should contain "lltc,ltc2941", "lltc,ltc2942", "lltc,ltc2943"
+    or "lltc,ltc2944" which also indicates the type of I2C chip attached.
 - reg: The 7-bit I2C address.
 - lltc,resistor-sense: The sense resistor value in milli-ohms. Can be a 32-bit
     negative value when the battery has been connected to the wrong end of the

drivers/power/reset/at91-sama5d2_shdwc.c

@@ -171,8 +171,8 @@ static u32 at91_shdwc_get_wakeup_input(struct platform_device *pdev,
 
 	for_each_child_of_node(np, cnp) {
 		if (of_property_read_u32(cnp, "reg", &wk_input)) {
-			dev_warn(&pdev->dev, "reg property is missing for %s\n",
-				 cnp->full_name);
+			dev_warn(&pdev->dev, "reg property is missing for %pOF\n",
+				 cnp);
 			continue;
 		}
 

drivers/power/supply/Kconfig

@@ -198,6 +198,15 @@ config BATTERY_BQ27XXX_I2C
 	  Say Y here to enable support for batteries with BQ27xxx chips
 	  connected over an I2C bus.
 
+config BATTERY_BQ27XXX_HDQ
+	tristate "BQ27xxx HDQ support"
+	depends on BATTERY_BQ27XXX
+	depends on W1
+	default y
+	help
+	  Say Y here to enable support for batteries with BQ27xxx chips
+	  connected over an HDQ bus.
+
 config BATTERY_BQ27XXX_DT_UPDATES_NVM
 	bool "BQ27xxx support for update of NVM/flash data memory"
 	depends on BATTERY_BQ27XXX_I2C
@@ -313,6 +322,19 @@ config BATTERY_MAX17042
 	  with MAX17042. This driver also supports max17047/50 chips which are
 	  improved version of max17042.
 
+config BATTERY_MAX1721X
+	tristate "MAX17211/MAX17215 standalone gas-gauge"
+	depends on W1
+	select REGMAP_W1
+	help
+	  MAX1721x is fuel-gauge systems for lithium-ion (Li+) batteries
+	  in handheld and portable equipment. MAX17211 used with single cell
+	  battery. MAX17215 designed for muticell battery. Both them have
+	  OneWire (W1) host interface.
+
+	  Say Y here to enable support for the MAX17211/MAX17215 standalone
+	  battery gas-gauge.
+
 config BATTERY_Z2
 	tristate "Z2 battery driver"
 	depends on I2C && MACH_ZIPIT2
@@ -365,6 +387,7 @@ config BATTERY_RX51
 config CHARGER_CPCAP
 	tristate "CPCAP PMIC Charger Driver"
 	depends on MFD_CPCAP && IIO
+	depends on OMAP_USB2 || (!OMAP_USB2 && COMPILE_TEST)
 	default MFD_CPCAP
 	help
 	  Say Y to enable support for CPCAP PMIC charger driver for Motorola

drivers/power/supply/Makefile

@@ -38,12 +38,14 @@ obj-$(CONFIG_BATTERY_SBS)	+= sbs-battery.o
 obj-$(CONFIG_CHARGER_SBS)	+= sbs-charger.o
 obj-$(CONFIG_BATTERY_BQ27XXX)	+= bq27xxx_battery.o
 obj-$(CONFIG_BATTERY_BQ27XXX_I2C) += bq27xxx_battery_i2c.o
+obj-$(CONFIG_BATTERY_BQ27XXX_HDQ) += bq27xxx_battery_hdq.o
 obj-$(CONFIG_BATTERY_DA9030)	+= da9030_battery.o
 obj-$(CONFIG_BATTERY_DA9052)	+= da9052-battery.o
 obj-$(CONFIG_CHARGER_DA9150)	+= da9150-charger.o
 obj-$(CONFIG_BATTERY_DA9150)	+= da9150-fg.o
 obj-$(CONFIG_BATTERY_MAX17040)	+= max17040_battery.o
 obj-$(CONFIG_BATTERY_MAX17042)	+= max17042_battery.o
+obj-$(CONFIG_BATTERY_MAX1721X)	+= max1721x_battery.o
 obj-$(CONFIG_BATTERY_Z2)	+= z2_battery.o
 obj-$(CONFIG_BATTERY_RT5033)	+= rt5033_battery.o
 obj-$(CONFIG_CHARGER_RT9455)	+= rt9455_charger.o

drivers/power/supply/act8945a_charger.c

@@ -596,9 +596,9 @@ static int act8945a_charger_probe(struct platform_device *pdev)
 		return ret;
 
 	irq = of_irq_get(pdev->dev.of_node, 0);
-	if (irq == -EPROBE_DEFER) {
+	if (irq <= 0) {
 		dev_err(&pdev->dev, "failed to find IRQ number\n");
-		return -EPROBE_DEFER;
+		return irq ?: -ENXIO;
 	}
 
 	ret = devm_request_irq(&pdev->dev, irq, act8945a_status_changed,

drivers/power/supply/bq27xxx_battery_hdq.c

+/*
+ * BQ27xxx battery monitor HDQ/1-wire driver
+ *
+ * Copyright (C) 2007-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/power/bq27xxx_battery.h>
+
+#include <linux/w1.h>
+
+#define W1_FAMILY_BQ27000	0x01
+
+#define HDQ_CMD_READ	(0 << 7)
+#define HDQ_CMD_WRITE	(1 << 7)
+
+static int F_ID;
+module_param(F_ID, int, S_IRUSR);
+MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ27xxx device");
+
+static int w1_bq27000_read(struct w1_slave *sl, unsigned int reg)
+{
+	u8 val;
+
+	mutex_lock(&sl->master->bus_mutex);
+	w1_write_8(sl->master, HDQ_CMD_READ | reg);
+	val = w1_read_8(sl->master);
+	mutex_unlock(&sl->master->bus_mutex);
+
+	return val;
+}
+
+static int bq27xxx_battery_hdq_read(struct bq27xxx_device_info *di, u8 reg,
+				    bool single)
+{
+	struct w1_slave *sl = dev_to_w1_slave(di->dev);
+	unsigned int timeout = 3;
+	int upper, lower;
+	int temp;
+
+	if (!single) {
+		/*
+		 * Make sure the value has not changed in between reading the
+		 * lower and the upper part
+		 */
+		upper = w1_bq27000_read(sl, reg + 1);
+		do {
+			temp = upper;
+			if (upper < 0)
+				return upper;
+
+			lower = w1_bq27000_read(sl, reg);
+			if (lower < 0)
+				return lower;
+
+			upper = w1_bq27000_read(sl, reg + 1);
+		} while (temp != upper && --timeout);
+
+		if (timeout == 0)
+			return -EIO;
+
+		return (upper << 8) | lower;
+	}
+
+	return w1_bq27000_read(sl, reg);
+}
+
+static int bq27xxx_battery_hdq_add_slave(struct w1_slave *sl)
+{
+	struct bq27xxx_device_info *di;
+
+	di = devm_kzalloc(&sl->dev, sizeof(*di), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	dev_set_drvdata(&sl->dev, di);
+
+	di->dev = &sl->dev;
+	di->chip = BQ27000;
+	di->name = "bq27000-battery";
+	di->bus.read = bq27xxx_battery_hdq_read;
+
+	return bq27xxx_battery_setup(di);
+}
+
+static void bq27xxx_battery_hdq_remove_slave(struct w1_slave *sl)
+{
+	struct bq27xxx_device_info *di = dev_get_drvdata(&sl->dev);
+
+	bq27xxx_battery_teardown(di);
+}
+
+static struct w1_family_ops bq27xxx_battery_hdq_fops = {
+	.add_slave	= bq27xxx_battery_hdq_add_slave,
+	.remove_slave	= bq27xxx_battery_hdq_remove_slave,
+};
+
+static struct w1_family bq27xxx_battery_hdq_family = {
+	.fid = W1_FAMILY_BQ27000,
+	.fops = &bq27xxx_battery_hdq_fops,
+};
+
+static int __init bq27xxx_battery_hdq_init(void)
+{
+	if (F_ID)
+		bq27xxx_battery_hdq_family.fid = F_ID;
+
+	return w1_register_family(&bq27xxx_battery_hdq_family);
+}
+module_init(bq27xxx_battery_hdq_init);
+
+static void __exit bq27xxx_battery_hdq_exit(void)
+{
+	w1_unregister_family(&bq27xxx_battery_hdq_family);
+}
+module_exit(bq27xxx_battery_hdq_exit);
+
+MODULE_AUTHOR("Texas Instruments Ltd");
+MODULE_DESCRIPTION("BQ27xxx battery monitor HDQ/1-wire driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_BQ27000));

drivers/power/supply/bq27xxx_battery_i2c.c

@@ -230,7 +230,7 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27210", BQ27010 },
 	{ "bq27500", BQ2750X },
 	{ "bq27510", BQ2751X },
-	{ "bq27520", BQ2751X },
+	{ "bq27520", BQ2752X },
 	{ "bq27500-1", BQ27500 },
 	{ "bq27510g1", BQ27510G1 },
 	{ "bq27510g2", BQ27510G2 },
@@ -240,16 +240,16 @@ static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
 	{ "bq27520g3", BQ27520G3 },
 	{ "bq27520g4", BQ27520G4 },
 	{ "bq27530", BQ27530 },
-	{ "bq27531", BQ27530 },
+	{ "bq27531", BQ27531 },
 	{ "bq27541", BQ27541 },
-	{ "bq27542", BQ27541 },
-	{ "bq27546", BQ27541 },
-	{ "bq27742", BQ27541 },
+	{ "bq27542", BQ27542 },
+	{ "bq27546", BQ27546 },
+	{ "bq27742", BQ27742 },
 	{ "bq27545", BQ27545 },
 	{ "bq27421", BQ27421 },
-	{ "bq27425", BQ27421 },
-	{ "bq27441", BQ27421 },
-	{ "bq27621", BQ27421 },
+	{ "bq27425", BQ27425 },
+	{ "bq27441", BQ27441 },
+	{ "bq27621", BQ27621 },
 	{},
 };
 MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);

drivers/power/supply/charger-manager.c

@@ -1632,8 +1632,7 @@ static int charger_manager_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	cm = devm_kzalloc(&pdev->dev,
-			sizeof(struct charger_manager),	GFP_KERNEL);
+	cm = devm_kzalloc(&pdev->dev, sizeof(*cm), GFP_KERNEL);
 	if (!cm)
 		return -ENOMEM;
 
@@ -1645,12 +1644,14 @@ static int charger_manager_probe(struct platform_device *pdev)
 	/* Initialize alarm timer */
 	if (alarmtimer_get_rtcdev()) {
 		cm_timer = devm_kzalloc(cm->dev, sizeof(*cm_timer), GFP_KERNEL);
+		if (!cm_timer)
+			return -ENOMEM;
 		alarm_init(cm_timer, ALARM_BOOTTIME, cm_timer_func);
 	}
 
 	/*
-	 * The following two do not need to be errors.
-	 * Users may intentionally ignore those two features.
+	 * Some of the following do not need to be errors.
+	 * Users may intentionally ignore those features.
 	 */
 	if (desc->fullbatt_uV == 0) {
 		dev_info(&pdev->dev, "Ignoring full-battery voltage threshold as it is not supplied\n");

drivers/power/supply/ds2780_battery.c

@@ -663,7 +663,7 @@ static ssize_t ds2780_write_param_eeprom_bin(struct file *filp,
 	return count;
 }
 
-static struct bin_attribute ds2780_param_eeprom_bin_attr = {
+static const struct bin_attribute ds2780_param_eeprom_bin_attr = {
 	.attr = {
 		.name = "param_eeprom",
 		.mode = S_IRUGO | S_IWUSR,
@@ -708,7 +708,7 @@ static ssize_t ds2780_write_user_eeprom_bin(struct file *filp,
 	return count;
 }
 
-static struct bin_attribute ds2780_user_eeprom_bin_attr = {
+static const struct bin_attribute ds2780_user_eeprom_bin_attr = {
 	.attr = {
 		.name = "user_eeprom",
 		.mode = S_IRUGO | S_IWUSR,

drivers/power/supply/ds2781_battery.c

@@ -665,7 +665,7 @@ static ssize_t ds2781_write_param_eeprom_bin(struct file *filp,
 	return count;
 }
 
-static struct bin_attribute ds2781_param_eeprom_bin_attr = {
+static const struct bin_attribute ds2781_param_eeprom_bin_attr = {
 	.attr = {
 		.name = "param_eeprom",
 		.mode = S_IRUGO | S_IWUSR,
@@ -711,7 +711,7 @@ static ssize_t ds2781_write_user_eeprom_bin(struct file *filp,
 	return count;
 }
 
-static struct bin_attribute ds2781_user_eeprom_bin_attr = {
+static const struct bin_attribute ds2781_user_eeprom_bin_attr = {
 	.attr = {
 		.name = "user_eeprom",
 		.mode = S_IRUGO | S_IWUSR,

drivers/power/supply/lp8788-charger.c

@@ -626,7 +626,7 @@ static ssize_t lp8788_show_charger_status(struct device *dev,
 {
 	struct lp8788_charger *pchg = dev_get_drvdata(dev);
 	enum lp8788_charging_state state;
-	char *desc[LP8788_MAX_CHG_STATE] = {
+	static const char * const desc[LP8788_MAX_CHG_STATE] = {
 		[LP8788_OFF] = "CHARGER OFF",
 		[LP8788_WARM_UP] = "WARM UP",
 		[LP8788_LOW_INPUT] = "LOW INPUT STATE",
@@ -650,8 +650,10 @@ static ssize_t lp8788_show_eoc_time(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
 	struct lp8788_charger *pchg = dev_get_drvdata(dev);
-	char *stime[] = { "400ms", "5min", "10min", "15min",
-			"20min", "25min", "30min", "No timeout" };
+	static const char * const stime[] = {
+		"400ms", "5min", "10min", "15min",
+		"20min", "25min", "30min", "No timeout"
+	};
 	u8 val;
 
 	lp8788_read_byte(pchg->lp, LP8788_CHG_EOC, &val);
@@ -665,9 +667,13 @@ static ssize_t lp8788_show_eoc_level(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
 	struct lp8788_charger *pchg = dev_get_drvdata(dev);
-	char *abs_level[] = { "25mA", "49mA", "75mA", "98mA" };
-	char *relative_level[] = { "5%", "10%", "15%", "20%" };
-	char *level;
+	static const char * const abs_level[] = {
+			"25mA", "49mA", "75mA", "98mA"
+	};
+	static const char * const relative_level[] = {
+			"5%", "10%", "15%", "20%"
+	};
+	const char *level;
 	u8 val;
 	u8 mode;
 

drivers/power/supply/ltc2941-battery-gauge.c

 /*
- * I2C client/driver for the Linear Technology LTC2941 and LTC2943
- * Battery Gas Gauge IC
+ * I2C client/driver for the Linear Technology LTC2941, LTC2942, LTC2943
+ * and LTC2944 Battery Gas Gauge IC
  *
  * Copyright (C) 2014 Topic Embedded Systems
  *
@@ -34,35 +34,39 @@ enum ltc294x_reg {
 	LTC294X_REG_CONTROL		= 0x01,
 	LTC294X_REG_ACC_CHARGE_MSB	= 0x02,
 	LTC294X_REG_ACC_CHARGE_LSB	= 0x03,
-	LTC294X_REG_THRESH_HIGH_MSB	= 0x04,
-	LTC294X_REG_THRESH_HIGH_LSB	= 0x05,
-	LTC294X_REG_THRESH_LOW_MSB	= 0x06,
-	LTC294X_REG_THRESH_LOW_LSB	= 0x07,
-	LTC294X_REG_VOLTAGE_MSB	= 0x08,
-	LTC294X_REG_VOLTAGE_LSB	= 0x09,
-	LTC294X_REG_CURRENT_MSB	= 0x0E,
-	LTC294X_REG_CURRENT_LSB	= 0x0F,
-	LTC294X_REG_TEMPERATURE_MSB	= 0x14,
-	LTC294X_REG_TEMPERATURE_LSB	= 0x15,
+	LTC294X_REG_VOLTAGE_MSB		= 0x08,
+	LTC294X_REG_VOLTAGE_LSB		= 0x09,
+	LTC2942_REG_TEMPERATURE_MSB	= 0x0C,
+	LTC2942_REG_TEMPERATURE_LSB	= 0x0D,
+	LTC2943_REG_CURRENT_MSB		= 0x0E,
+	LTC2943_REG_CURRENT_LSB		= 0x0F,
+	LTC2943_REG_TEMPERATURE_MSB	= 0x14,
+	LTC2943_REG_TEMPERATURE_LSB	= 0x15,
 };
 
-#define LTC2943_REG_CONTROL_MODE_MASK (BIT(7) | BIT(6))
-#define LTC2943_REG_CONTROL_MODE_SCAN BIT(7)
+enum ltc294x_id {
+	LTC2941_ID,
+	LTC2942_ID,
+	LTC2943_ID,
+	LTC2944_ID,
+};
+
+#define LTC2941_REG_STATUS_CHIP_ID	BIT(7)
+
+#define LTC2942_REG_CONTROL_MODE_SCAN	(BIT(7) | BIT(6))
+#define LTC2943_REG_CONTROL_MODE_SCAN	BIT(7)
 #define LTC294X_REG_CONTROL_PRESCALER_MASK	(BIT(5) | BIT(4) | BIT(3))
 #define LTC294X_REG_CONTROL_SHUTDOWN_MASK	(BIT(0))
 #define LTC294X_REG_CONTROL_PRESCALER_SET(x) \
 	((x << 3) & LTC294X_REG_CONTROL_PRESCALER_MASK)
 #define LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED	0
 
-#define LTC2941_NUM_REGS	0x08
-#define LTC2943_NUM_REGS	0x18
-
 struct ltc294x_info {
 	struct i2c_client *client;	/* I2C Client pointer */
 	struct power_supply *supply;	/* Supply pointer */
 	struct power_supply_desc supply_desc;	/* Supply description */
 	struct delayed_work work;	/* Work scheduler */
-	unsigned long num_regs;	/* Number of registers (chip type) */
+	enum ltc294x_id id;		/* Chip type */
 	int charge;	/* Last charge register content */
 	int r_sense;	/* mOhm */
 	int Qlsb;	/* nAh */
@@ -145,9 +149,18 @@ static int ltc294x_reset(const struct ltc294x_info *info, int prescaler_exp)
 
 	control = LTC294X_REG_CONTROL_PRESCALER_SET(prescaler_exp) |
 				LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED;
-	/* Put the 2943 into "monitor" mode, so it measures every 10 sec */
-	if (info->num_regs == LTC2943_NUM_REGS)
+	/* Put device into "monitor" mode */
+	switch (info->id) {
+	case LTC2942_ID:	/* 2942 measures every 2 sec */
+		control |= LTC2942_REG_CONTROL_MODE_SCAN;
+		break;
+	case LTC2943_ID:
+	case LTC2944_ID:	/* 2943 and 2944 measure every 10 sec */
 		control |= LTC2943_REG_CONTROL_MODE_SCAN;
+		break;
+	default:
+		break;
+	}
 
 	if (value != control) {
 		ret = ltc294x_write_regs(info->client,
@@ -252,7 +265,24 @@ static int ltc294x_get_voltage(const struct ltc294x_info *info, int *val)
 	ret = ltc294x_read_regs(info->client,
 		LTC294X_REG_VOLTAGE_MSB, &datar[0], 2);
 	value = (datar[0] << 8) | datar[1];
-	*val = ((value * 23600) / 0xFFFF) * 1000; /* in uV */
+	switch (info->id) {
+	case LTC2943_ID:
+		value *= 23600 * 2;
+		value /= 0xFFFF;
+		value *= 1000 / 2;
+		break;
+	case LTC2944_ID:
+		value *= 70800 / 5*4;
+		value /= 0xFFFF;
+		value *= 1000 * 5/4;
+		break;
+	default:
+		value *= 6000 * 10;
+		value /= 0xFFFF;
+		value *= 1000 / 10;
+		break;
+	}
+	*val = value;
 	return ret;
 }
 
@@ -263,27 +293,38 @@ static int ltc294x_get_current(const struct ltc294x_info *info, int *val)
 	s32 value;
 
 	ret = ltc294x_read_regs(info->client,
-		LTC294X_REG_CURRENT_MSB, &datar[0], 2);
+		LTC2943_REG_CURRENT_MSB, &datar[0], 2);
 	value = (datar[0] << 8) | datar[1];
 	value -= 0x7FFF;
+	if (info->id == LTC2944_ID)
+		value *= 64000;
+	else
+		value *= 60000;
 	/* Value is in range -32k..+32k, r_sense is usually 10..50 mOhm,
 	 * the formula below keeps everything in s32 range while preserving
 	 * enough digits */
-	*val = 1000 * ((60000 * value) / (info->r_sense * 0x7FFF)); /* in uA */
+	*val = 1000 * (value / (info->r_sense * 0x7FFF)); /* in uA */
 	return ret;
 }
 
 static int ltc294x_get_temperature(const struct ltc294x_info *info, int *val)
 {
+	enum ltc294x_reg reg;
 	int ret;
 	u8 datar[2];
 	u32 value;
 
-	ret = ltc294x_read_regs(info->client,
-		LTC294X_REG_TEMPERATURE_MSB, &datar[0], 2);
-	value = (datar[0] << 8) | datar[1];
-	/* Full-scale is 510 Kelvin, convert to centidegrees  */
-	*val = (((51000 * value) / 0xFFFF) - 27215);
+	if (info->id == LTC2942_ID) {
+		reg = LTC2942_REG_TEMPERATURE_MSB;
+		value = 60000;	/* Full-scale is 600 Kelvin */
+	} else {
+		reg = LTC2943_REG_TEMPERATURE_MSB;
+		value = 51000;	/* Full-scale is 510 Kelvin */
+	}
+	ret = ltc294x_read_regs(info->client, reg, &datar[0], 2);
+	value *= (datar[0] << 8) | datar[1];
+	/* Convert to centidegrees  */
+	*val = value / 0xFFFF - 27215;
 	return ret;
 }
 
@@ -357,8 +398,8 @@ static enum power_supply_property ltc294x_properties[] = {
 	POWER_SUPPLY_PROP_CHARGE_COUNTER,
 	POWER_SUPPLY_PROP_CHARGE_NOW,
 	POWER_SUPPLY_PROP_VOLTAGE_NOW,
-	POWER_SUPPLY_PROP_CURRENT_NOW,
 	POWER_SUPPLY_PROP_TEMP,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
 };
 
 static int ltc294x_i2c_remove(struct i2c_client *client)
@@ -375,10 +416,11 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
 {
 	struct power_supply_config psy_cfg = {};
 	struct ltc294x_info *info;
+	struct device_node *np;
 	int ret;
 	u32 prescaler_exp;
 	s32 r_sense;
-	struct device_node *np;
+	u8 status;
 
 	info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL);
 	if (info == NULL)
@@ -388,7 +430,7 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
 
 	np = of_node_get(client->dev.of_node);
 
-	info->num_regs = (unsigned long)of_device_get_match_data(&client->dev);
+	info->id = (enum ltc294x_id)of_device_get_match_data(&client->dev);
 	info->supply_desc.name = np->name;
 
 	/* r_sense can be negative, when sense+ is connected to the battery
@@ -409,7 +451,7 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
 		prescaler_exp = LTC2941_MAX_PRESCALER_EXP;
 	}
 
-	if (info->num_regs == LTC2943_NUM_REGS) {
+	if (info->id == LTC2943_ID) {
 		if (prescaler_exp > LTC2943_MAX_PRESCALER_EXP)
 			prescaler_exp = LTC2943_MAX_PRESCALER_EXP;
 		info->Qlsb = ((340 * 50000) / r_sense) /
@@ -421,21 +463,39 @@ static int ltc294x_i2c_probe(struct i2c_client *client,
 				(128 / (1 << prescaler_exp));
 	}
 
+	/* Read status register to check for LTC2942 */
+	if (info->id == LTC2941_ID || info->id == LTC2942_ID) {
+		ret = ltc294x_read_regs(client, LTC294X_REG_STATUS, &status, 1);
+		if (ret < 0) {
+			dev_err(&client->dev,
+				"Could not read status register\n");
+			return ret;
+		}
+		if (status & LTC2941_REG_STATUS_CHIP_ID)
+			info->id = LTC2941_ID;
+		else
+			info->id = LTC2942_ID;
+	}
+
 	info->client = client;
 	info->supply_desc.type = POWER_SUPPLY_TYPE_BATTERY;
 	info->supply_desc.properties = ltc294x_properties;
-	if (info->num_regs >= LTC294X_REG_TEMPERATURE_LSB)
+	switch (info->id) {
+	case LTC2944_ID:
+	case LTC2943_ID:
 		info->supply_desc.num_properties =
 			ARRAY_SIZE(ltc294x_properties);
-	else if (info->num_regs >= LTC294X_REG_CURRENT_LSB)
+		break;
+	case LTC2942_ID:
 		info->supply_desc.num_properties =
 			ARRAY_SIZE(ltc294x_properties) - 1;
-	else if (info->num_regs >= LTC294X_REG_VOLTAGE_LSB)
-		info->supply_desc.num_properties =
-			ARRAY_SIZE(ltc294x_properties) - 2;
-	else
+		break;
+	case LTC2941_ID:
+	default:
 		info->supply_desc.num_properties =
 			ARRAY_SIZE(ltc294x_properties) - 3;
+		break;
+	}
 	info->supply_desc.get_property = ltc294x_get_property;
 	info->supply_desc.set_property = ltc294x_set_property;
 	info->supply_desc.property_is_writeable = ltc294x_property_is_writeable;
@@ -492,8 +552,10 @@ static SIMPLE_DEV_PM_OPS(ltc294x_pm_ops, ltc294x_suspend, ltc294x_resume);
 
 
 static const struct i2c_device_id ltc294x_i2c_id[] = {
-	{"ltc2941", LTC2941_NUM_REGS},
-	{"ltc2943", LTC2943_NUM_REGS},
+	{ "ltc2941", LTC2941_ID, },
+	{ "ltc2942", LTC2942_ID, },
+	{ "ltc2943", LTC2943_ID, },
+	{ "ltc2944", LTC2944_ID, },
 	{ },
 };
 MODULE_DEVICE_TABLE(i2c, ltc294x_i2c_id);
@@ -501,11 +563,19 @@ MODULE_DEVICE_TABLE(i2c, ltc294x_i2c_id);
 static const struct of_device_id ltc294x_i2c_of_match[] = {
 	{
 		.compatible = "lltc,ltc2941",
-		.data = (void *)LTC2941_NUM_REGS
+		.data = (void *)LTC2941_ID,
+	},
+	{
+		.compatible = "lltc,ltc2942",
+		.data = (void *)LTC2942_ID,
 	},
 	{
 		.compatible = "lltc,ltc2943",
-		.data = (void *)LTC2943_NUM_REGS
+		.data = (void *)LTC2943_ID,
+	},
+	{
+		.compatible = "lltc,ltc2944",
+		.data = (void *)LTC2944_ID,
 	},
 	{ },
 };
@@ -525,5 +595,5 @@ module_i2c_driver(ltc294x_driver);
 
 MODULE_AUTHOR("Auryn Verwegen, Topic Embedded Systems");
 MODULE_AUTHOR("Mike Looijmans, Topic Embedded Products");
-MODULE_DESCRIPTION("LTC2941/LTC2943 Battery Gas Gauge IC driver");
+MODULE_DESCRIPTION("LTC2941/LTC2942/LTC2943/LTC2944 Battery Gas Gauge IC driver");
 MODULE_LICENSE("GPL");

drivers/power/supply/max17042_battery.c

@@ -22,6 +22,7 @@
  * This driver is based on max17040_battery.c
  */
 
+#include <linux/acpi.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/slab.h>
@@ -982,6 +983,8 @@ static int max17042_probe(struct i2c_client *client,
 	struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
 	const struct power_supply_desc *max17042_desc = &max17042_psy_desc;
 	struct power_supply_config psy_cfg = {};
+	const struct acpi_device_id *acpi_id = NULL;
+	struct device *dev = &client->dev;
 	struct max17042_chip *chip;
 	int ret;
 	int i;
@@ -995,7 +998,15 @@ static int max17042_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	chip->client = client;
-	chip->chip_type = id->driver_data;
+	if (id) {
+		chip->chip_type = id->driver_data;
+	} else {
+		acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
+		if (!acpi_id)
+			return -ENODEV;
+
+		chip->chip_type = acpi_id->driver_data;
+	}
 	chip->regmap = devm_regmap_init_i2c(client, &max17042_regmap_config);
 	if (IS_ERR(chip->regmap)) {
 		dev_err(&client->dev, "Failed to initialize regmap\n");
@@ -1039,11 +1050,18 @@ static int max17042_probe(struct i2c_client *client,
 	}
 
 	if (client->irq) {
+		unsigned int flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
+
+		/*
+		 * On ACPI systems the IRQ may be handled by ACPI-event code,
+		 * so we need to share (if the ACPI code is willing to share).
+		 */
+		if (acpi_id)
+			flags |= IRQF_SHARED | IRQF_PROBE_SHARED;
+
 		ret = devm_request_threaded_irq(&client->dev, client->irq,
 						NULL,
-						max17042_thread_handler,
-						IRQF_TRIGGER_FALLING |
-						IRQF_ONESHOT,
+						max17042_thread_handler, flags,
 						chip->battery->desc->name,
 						chip);
 		if (!ret) {
@@ -1053,10 +1071,13 @@ static int max17042_probe(struct i2c_client *client,
 			max17042_set_soc_threshold(chip, 1);
 		} else {
 			client->irq = 0;
-			dev_err(&client->dev, "%s(): cannot get IRQ\n",
-				__func__);
+			if (ret != -EBUSY)
+				dev_err(&client->dev, "Failed to get IRQ\n");
 		}
 	}
+	/* Not able to update the charge threshold when exceeded? -> disable */
+	if (!client->irq)
+		regmap_write(chip->regmap, MAX17042_SALRT_Th, 0xff00);
 
 	regmap_read(chip->regmap, MAX17042_STATUS, &val);
 	if (val & STATUS_POR_BIT) {
@@ -1104,6 +1125,14 @@ static int max17042_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(max17042_pm_ops, max17042_suspend,
 			max17042_resume);
 
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id max17042_acpi_match[] = {
+	{ "MAX17047", MAXIM_DEVICE_TYPE_MAX17047 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, max17042_acpi_match);
+#endif
+
 #ifdef CONFIG_OF
 static const struct of_device_id max17042_dt_match[] = {
 	{ .compatible = "maxim,max17042" },
@@ -1125,6 +1154,7 @@ MODULE_DEVICE_TABLE(i2c, max17042_id);
 static struct i2c_driver max17042_i2c_driver = {
 	.driver	= {
 		.name	= "max17042",
+		.acpi_match_table = ACPI_PTR(max17042_acpi_match),
 		.of_match_table = of_match_ptr(max17042_dt_match),
 		.pm	= &max17042_pm_ops,
 	},

drivers/power/supply/olpc_battery.c

@@ -535,7 +535,7 @@ static ssize_t olpc_bat_eeprom_read(struct file *filp, struct kobject *kobj,
 	return count;
 }
 
-static struct bin_attribute olpc_bat_eeprom = {
+static const struct bin_attribute olpc_bat_eeprom = {
 	.attr = {
 		.name = "eeprom",
 		.mode = S_IRUGO,
@@ -559,7 +559,7 @@ static ssize_t olpc_bat_error_read(struct device *dev,
 	return sprintf(buf, "%d\n", ec_byte);
 }
 
-static struct device_attribute olpc_bat_error = {
+static const struct device_attribute olpc_bat_error = {
 	.attr = {
 		.name = "error",
 		.mode = S_IRUGO,

drivers/power/supply/pcf50633-charger.c

@@ -254,7 +254,7 @@ static struct attribute *pcf50633_mbc_sysfs_entries[] = {
 	NULL,
 };
 
-static struct attribute_group mbc_attr_group = {
+static const struct attribute_group mbc_attr_group = {
 	.name	= NULL,			/* put in device directory */
 	.attrs	= pcf50633_mbc_sysfs_entries,
 };

drivers/power/supply/power_supply_core.c

@@ -259,18 +259,14 @@ static int power_supply_check_supplies(struct power_supply *psy)
 	/* All supplies found, allocate char ** array for filling */
 	psy->supplied_from = devm_kzalloc(&psy->dev, sizeof(psy->supplied_from),
 					  GFP_KERNEL);
-	if (!psy->supplied_from) {
-		dev_err(&psy->dev, "Couldn't allocate memory for supply list\n");
+	if (!psy->supplied_from)
 		return -ENOMEM;
-	}
 
 	*psy->supplied_from = devm_kzalloc(&psy->dev,
 					   sizeof(char *) * (cnt - 1),
 					   GFP_KERNEL);
-	if (!*psy->supplied_from) {
-		dev_err(&psy->dev, "Couldn't allocate memory for supply list\n");
+	if (!*psy->supplied_from)
 		return -ENOMEM;
-	}
 
 	return power_supply_populate_supplied_from(psy);
 }
@@ -314,11 +310,12 @@ static int __power_supply_am_i_supplied(struct device *dev, void *_data)
 	struct power_supply *epsy = dev_get_drvdata(dev);
 	struct psy_am_i_supplied_data *data = _data;
 
-	data->count++;
-	if (__power_supply_is_supplied_by(epsy, data->psy))
+	if (__power_supply_is_supplied_by(epsy, data->psy)) {
+		data->count++;
 		if (!epsy->desc->get_property(epsy, POWER_SUPPLY_PROP_ONLINE,
 					&ret))
 			return ret.intval;
+	}
 
 	return 0;
 }
@@ -374,6 +371,47 @@ int power_supply_is_system_supplied(void)
 }
 EXPORT_SYMBOL_GPL(power_supply_is_system_supplied);
 
+static int __power_supply_get_supplier_max_current(struct device *dev,
+						   void *data)
+{
+	union power_supply_propval ret = {0,};
+	struct power_supply *epsy = dev_get_drvdata(dev);
+	struct power_supply *psy = data;
+
+	if (__power_supply_is_supplied_by(epsy, psy))
+		if (!epsy->desc->get_property(epsy,
+					      POWER_SUPPLY_PROP_CURRENT_MAX,
+					      &ret))
+			return ret.intval;
+
+	return 0;
+}
+
+int power_supply_set_input_current_limit_from_supplier(struct power_supply *psy)
+{
+	union power_supply_propval val = {0,};
+	int curr;
+
+	if (!psy->desc->set_property)
+		return -EINVAL;
+
+	/*
+	 * This function is not intended for use with a supply with multiple
+	 * suppliers, we simply pick the first supply to report a non 0
+	 * max-current.
+	 */
+	curr = class_for_each_device(power_supply_class, NULL, psy,
+				      __power_supply_get_supplier_max_current);
+	if (curr <= 0)
+		return (curr == 0) ? -ENODEV : curr;
+
+	val.intval = curr;
+
+	return psy->desc->set_property(psy,
+				POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, &val);
+}
+EXPORT_SYMBOL_GPL(power_supply_set_input_current_limit_from_supplier);
+
 int power_supply_set_battery_charged(struct power_supply *psy)
 {
 	if (atomic_read(&psy->use_cnt) >= 0 &&

drivers/power/supply/sbs-battery.c

@@ -12,25 +12,21 @@
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
  */
 
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
+#include <linux/delay.h>
 #include <linux/err.h>
-#include <linux/power_supply.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
-#include <linux/slab.h>
+#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/of.h>
-#include <linux/stat.h>
-
 #include <linux/power/sbs-battery.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
 
 enum {
 	REG_MANUFACTURER_DATA,
@@ -60,8 +56,8 @@ enum {
 #define BATTERY_MODE_OFFSET		0x03
 #define BATTERY_MODE_MASK		0x8000
 enum sbs_battery_mode {
-	BATTERY_MODE_AMPS,
-	BATTERY_MODE_WATTS
+	BATTERY_MODE_AMPS = 0,
+	BATTERY_MODE_WATTS = 0x8000
 };
 
 /* manufacturer access defines */
@@ -532,6 +528,8 @@ static enum sbs_battery_mode sbs_set_battery_mode(struct i2c_client *client,
 	if (ret < 0)
 		return ret;
 
+	usleep_range(1000, 2000);
+
 	return original_val & BATTERY_MODE_MASK;
 }
 

drivers/w1/slaves/Kconfig

@@ -148,10 +148,4 @@ config W1_SLAVE_DS28E04
 
 	  If you are unsure, say N.
 
-config W1_SLAVE_BQ27000
-	tristate "BQ27000 slave support"
-	help
-	  Say Y here if you want to use a hdq
-	  bq27000 slave support.
-
 endmenu

drivers/w1/slaves/Makefile

@@ -16,5 +16,4 @@ obj-$(CONFIG_W1_SLAVE_DS2438)	+= w1_ds2438.o
 obj-$(CONFIG_W1_SLAVE_DS2760)	+= w1_ds2760.o
 obj-$(CONFIG_W1_SLAVE_DS2780)	+= w1_ds2780.o
 obj-$(CONFIG_W1_SLAVE_DS2781)	+= w1_ds2781.o
-obj-$(CONFIG_W1_SLAVE_BQ27000)	+= w1_bq27000.o
 obj-$(CONFIG_W1_SLAVE_DS28E04)	+= w1_ds28e04.o

drivers/w1/slaves/w1_bq27000.c

-/*
- * drivers/w1/slaves/w1_bq27000.c
- *
- * Copyright (C) 2007 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/mutex.h>
-#include <linux/power/bq27xxx_battery.h>
-
-#include <linux/w1.h>
-
-#define W1_FAMILY_BQ27000	0x01
-
-#define HDQ_CMD_READ	(0)
-#define HDQ_CMD_WRITE	(1<<7)
-
-static int F_ID;
-module_param(F_ID, int, S_IRUSR);
-MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ device");
-
-static int w1_bq27000_read(struct device *dev, unsigned int reg)
-{
-	u8 val;
-	struct w1_slave *sl = container_of(dev->parent, struct w1_slave, dev);
-
-	mutex_lock(&sl->master->bus_mutex);
-	w1_write_8(sl->master, HDQ_CMD_READ | reg);
-	val = w1_read_8(sl->master);
-	mutex_unlock(&sl->master->bus_mutex);
-
-	return val;
-}
-
-static struct bq27xxx_platform_data bq27000_battery_info = {
-	.read   = w1_bq27000_read,
-	.name   = "bq27000-battery",
-	.chip   = BQ27000,
-};
-
-static int w1_bq27000_add_slave(struct w1_slave *sl)
-{
-	int ret;
-	struct platform_device *pdev;
-
-	pdev = platform_device_alloc("bq27000-battery", -1);
-	if (!pdev) {
-		ret = -ENOMEM;
-		return ret;
-	}
-	ret = platform_device_add_data(pdev,
-				       &bq27000_battery_info,
-				       sizeof(bq27000_battery_info));
-	if (ret)
-		goto pdev_add_failed;
-	pdev->dev.parent = &sl->dev;
-
-	ret = platform_device_add(pdev);
-	if (ret)
-		goto pdev_add_failed;
-
-	dev_set_drvdata(&sl->dev, pdev);
-
-	goto success;
-
-pdev_add_failed:
-	platform_device_put(pdev);
-success:
-	return ret;
-}
-
-static void w1_bq27000_remove_slave(struct w1_slave *sl)
-{
-	struct platform_device *pdev = dev_get_drvdata(&sl->dev);
-
-	platform_device_unregister(pdev);
-}
-
-static struct w1_family_ops w1_bq27000_fops = {
-	.add_slave	= w1_bq27000_add_slave,
-	.remove_slave	= w1_bq27000_remove_slave,
-};
-
-static struct w1_family w1_bq27000_family = {
-	.fid = W1_FAMILY_BQ27000,
-	.fops = &w1_bq27000_fops,
-};
-
-static int __init w1_bq27000_init(void)
-{
-	if (F_ID)
-		w1_bq27000_family.fid = F_ID;
-
-	return w1_register_family(&w1_bq27000_family);
-}
-
-static void __exit w1_bq27000_exit(void)
-{
-	w1_unregister_family(&w1_bq27000_family);
-}
-
-module_init(w1_bq27000_init);
-module_exit(w1_bq27000_exit);
-
-MODULE_AUTHOR("Texas Instruments Ltd");
-MODULE_DESCRIPTION("HDQ/1-wire slave driver bq27000 battery monitor chip");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_BQ27000));

include/linux/power/bq24190_charger.h

+/*
+ * Platform data for the TI bq24190 battery charger driver.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _BQ24190_CHARGER_H_
+#define _BQ24190_CHARGER_H_
+
+#include <linux/regulator/machine.h>
+
+struct bq24190_platform_data {
+	const struct regulator_init_data *regulator_init_data;
+};
+
+#endif

include/linux/power/bq27xxx_battery.h

@@ -6,6 +6,7 @@ enum bq27xxx_chip {
 	BQ27010, /* bq27010, bq27210 */
 	BQ2750X, /* bq27500 deprecated alias */
 	BQ2751X, /* bq27510, bq27520 deprecated alias */
+	BQ2752X,
 	BQ27500, /* bq27500/1 */
 	BQ27510G1, /* bq27510G1 */
 	BQ27510G2, /* bq27510G2 */
@@ -15,26 +16,16 @@ enum bq27xxx_chip {
 	BQ27520G3, /* bq27520G3 */
 	BQ27520G4, /* bq27520G4 */
 	BQ27530, /* bq27530, bq27531 */
+	BQ27531,
 	BQ27541, /* bq27541, bq27542, bq27546, bq27742 */
+	BQ27542,
+	BQ27546,
+	BQ27742,
 	BQ27545, /* bq27545 */
 	BQ27421, /* bq27421, bq27425, bq27441, bq27621 */
-};
-
-/**
- * struct bq27xxx_plaform_data - Platform data for bq27xxx devices
- * @name: Name of the battery.
- * @chip: Chip class number of this device.
- * @read: HDQ read callback.
- *	This function should provide access to the HDQ bus the battery is
- *	connected to.
- *	The first parameter is a pointer to the battery device, the second the
- *	register to be read. The return value should either be the content of
- *	the passed register or an error value.
- */
-struct bq27xxx_platform_data {
-	const char *name;
-	enum bq27xxx_chip chip;
-	int (*read)(struct device *dev, unsigned int);
+	BQ27425,
+	BQ27441,
+	BQ27621,
 };
 
 struct bq27xxx_device_info;
@@ -63,7 +54,7 @@ struct bq27xxx_device_info {
 	struct device *dev;
 	int id;
 	enum bq27xxx_chip chip;
-	bool ram_chip;
+	u32 opts;
 	const char *name;
 	struct bq27xxx_dm_reg *dm_regs;
 	u32 unseal_key;

include/linux/power_supply.h

@@ -332,6 +332,8 @@ extern int power_supply_get_battery_info(struct power_supply *psy,
 					 struct power_supply_battery_info *info);
 extern void power_supply_changed(struct power_supply *psy);
 extern int power_supply_am_i_supplied(struct power_supply *psy);
+extern int power_supply_set_input_current_limit_from_supplier(
+					 struct power_supply *psy);
 extern int power_supply_set_battery_charged(struct power_supply *psy);
 
 #ifdef CONFIG_POWER_SUPPLY