Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  [PATCH] USB: fix omninet driver bug
  [PATCH] USB: add ark3116 usb to serial driver
  [PATCH] usbserial: Fixes leak in serial_open() error path.
  [PATCH] usbserial: Fixes use-after-free in serial_open().
  [PATCH] USB: Emagic USB firmware loading fixes
  [PATCH] USB: add an IBM USB keyboard to the HID_QUIRK_NOGET blacklist
  [PATCH] USB: Add Sieraa Wireless 580 evdo card to airprime.c
  [PATCH] USB: ftdi_sio: add device id for ACT Solutions HomePro ZWave interface
  [PATCH] USB: ftdi_sio: Add support for HCG HF Dual ISO RFID Reader
  [PATCH] USB: ub oops in block_uevent
  [PATCH] USB: usbcore: don't check the device's power source
  [PATCH] USB: fix OHCI PM regression
  [PATCH] USB: pegasus fixes (logstorm, suspend)
  [PATCH] USBATM: fix modinfo output
  [PATCH] USBATM: change the default speedtouch iso altsetting
  [PATCH] USB: fix bug in ohci-hcd.c ohci_restart()

drivers/block/ub.c

@@ -536,6 +536,9 @@ static void ub_cleanup(struct ub_dev *sc)
 		kfree(lun);
 	}
 
+	usb_set_intfdata(sc->intf, NULL);
+	usb_put_intf(sc->intf);
+	usb_put_dev(sc->dev);
 	kfree(sc);
 }
 
@@ -2221,7 +2224,12 @@ static int ub_probe(struct usb_interface *intf,
 	// sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
 	usb_set_intfdata(intf, sc);
 	usb_get_dev(sc->dev);
-	// usb_get_intf(sc->intf);	/* Do we need this? */
+	/*
+	 * Since we give the interface struct to the block level through
+	 * disk->driverfs_dev, we have to pin it. Otherwise, block_uevent
+	 * oopses on close after a disconnect (kernels 2.6.16 and up).
+	 */
+	usb_get_intf(sc->intf);
 
 	snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
 	    sc->dev->bus->busnum, sc->dev->devnum);
@@ -2286,7 +2294,7 @@ static int ub_probe(struct usb_interface *intf,
 
 err_dev_desc:
 	usb_set_intfdata(intf, NULL);
-	// usb_put_intf(sc->intf);
+	usb_put_intf(sc->intf);
 	usb_put_dev(sc->dev);
 	kfree(sc);
 err_core:
@@ -2461,12 +2469,6 @@ static void ub_disconnect(struct usb_interface *intf)
 	 * and no URBs left in transit.
 	 */
 
-	usb_set_intfdata(intf, NULL);
-	// usb_put_intf(sc->intf);
-	sc->intf = NULL;
-	usb_put_dev(sc->dev);
-	sc->dev = NULL;
-
 	ub_put(sc);
 }
 

drivers/usb/atm/speedtch.c

@@ -69,7 +69,7 @@ static const char speedtch_driver_name[] = "speedtch";
 #define RESUBMIT_DELAY		1000	/* milliseconds */
 
 #define DEFAULT_BULK_ALTSETTING	1
-#define DEFAULT_ISOC_ALTSETTING	2
+#define DEFAULT_ISOC_ALTSETTING	3
 #define DEFAULT_DL_512_FIRST	0
 #define DEFAULT_ENABLE_ISOC	0
 #define DEFAULT_SW_BUFFERING	0

drivers/usb/atm/usbatm.c

@@ -99,11 +99,11 @@ static const char usbatm_driver_name[] = "usbatm";
 
 #define UDSL_MAX_RCV_URBS		16
 #define UDSL_MAX_SND_URBS		16
-#define UDSL_MAX_BUF_SIZE		64 * 1024	/* bytes */
+#define UDSL_MAX_BUF_SIZE		65536
 #define UDSL_DEFAULT_RCV_URBS		4
 #define UDSL_DEFAULT_SND_URBS		4
-#define UDSL_DEFAULT_RCV_BUF_SIZE	64 * ATM_CELL_SIZE	/* bytes */
-#define UDSL_DEFAULT_SND_BUF_SIZE	64 * ATM_CELL_SIZE	/* bytes */
+#define UDSL_DEFAULT_RCV_BUF_SIZE	3392	/* 64 * ATM_CELL_SIZE */
+#define UDSL_DEFAULT_SND_BUF_SIZE	3392	/* 64 * ATM_CELL_SIZE */
 
 #define ATM_CELL_HEADER			(ATM_CELL_SIZE - ATM_CELL_PAYLOAD)
 
@@ -135,7 +135,7 @@ MODULE_PARM_DESC(rcv_buf_bytes,
 module_param(snd_buf_bytes, uint, S_IRUGO);
 MODULE_PARM_DESC(snd_buf_bytes,
 		 "Size of the buffers used for transmission, in bytes (range: 1-"
-		 __MODULE_STRING(UDSL_MAX_SND_BUF_SIZE) ", default: "
+		 __MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: "
 		 __MODULE_STRING(UDSL_DEFAULT_SND_BUF_SIZE) ")");
 
 

drivers/usb/core/hcd.c

@@ -1805,6 +1805,12 @@ int usb_add_hcd(struct usb_hcd *hcd,
 			USB_SPEED_FULL;
 	hcd->self.root_hub = rhdev;
 
+	/* wakeup flag init defaults to "everything works" for root hubs,
+	 * but drivers can override it in reset() if needed, along with
+	 * recording the overall controller's system wakeup capability.
+	 */
+	device_init_wakeup(&rhdev->dev, 1);
+
 	/* "reset" is misnamed; its role is now one-time init. the controller
 	 * should already have been reset (and boot firmware kicked off etc).
 	 */
@@ -1813,13 +1819,6 @@ int usb_add_hcd(struct usb_hcd *hcd,
 		goto err_hcd_driver_setup;
 	}
 
-	/* wakeup flag init is in transition; for now we can't rely on PCI to
-	 * initialize these bits properly, so we let reset() override it.
-	 * This init should _precede_ the reset() once PCI behaves.
-	 */
-	device_init_wakeup(&rhdev->dev,
-			device_can_wakeup(hcd->self.controller));
-
 	/* NOTE: root hub and controller capabilities may not be the same */
 	if (device_can_wakeup(hcd->self.controller)
 			&& device_can_wakeup(&hcd->self.root_hub->dev))

drivers/usb/core/hub.c

@@ -1168,19 +1168,9 @@ static inline const char *plural(int n)
 static int choose_configuration(struct usb_device *udev)
 {
 	int i;
-	u16 devstatus;
-	int bus_powered;
 	int num_configs;
 	struct usb_host_config *c, *best;
 
-	/* If this fails, assume the device is bus-powered */
-	devstatus = 0;
-	usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
-	le16_to_cpus(&devstatus);
-	bus_powered = ((devstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0);
-	dev_dbg(&udev->dev, "device is %s-powered\n",
-			bus_powered ? "bus" : "self");
-
 	best = NULL;
 	c = udev->config;
 	num_configs = udev->descriptor.bNumConfigurations;
@@ -1197,6 +1187,19 @@ static int choose_configuration(struct usb_device *udev)
 		 * similar errors in their descriptors.  If the next test
 		 * were allowed to execute, such configurations would always
 		 * be rejected and the devices would not work as expected.
+		 * In the meantime, we run the risk of selecting a config
+		 * that requires external power at a time when that power
+		 * isn't available.  It seems to be the lesser of two evils.
+		 *
+		 * Bugzilla #6448 reports a device that appears to crash
+		 * when it receives a GET_DEVICE_STATUS request!  We don't
+		 * have any other way to tell whether a device is self-powered,
+		 * but since we don't use that information anywhere but here,
+		 * the call has been removed.
+		 *
+		 * Maybe the GET_DEVICE_STATUS call and the test below can
+		 * be reinstated when device firmwares become more reliable.
+		 * Don't hold your breath.
 		 */
 #if 0
 		/* Rule out self-powered configs for a bus-powered device */

drivers/usb/host/ohci-hcd.c

@@ -863,7 +863,7 @@ static int ohci_restart (struct ohci_hcd *ohci)
 		i = ohci->num_ports;
 		while (i--)
 			ohci_writel (ohci, RH_PS_PSS,
-				&ohci->regs->roothub.portstatus [temp]);
+				&ohci->regs->roothub.portstatus [i]);
 		ohci_dbg (ohci, "restart complete\n");
 	}
 	return 0;

drivers/usb/input/hid-core.c

@@ -1557,6 +1557,9 @@ void hid_init_reports(struct hid_device *hid)
 #define USB_VENDOR_ID_HP		0x03f0
 #define USB_DEVICE_ID_HP_USBHUB_KB	0x020c
 
+#define USB_VENDOR_ID_IBM		0x04b3
+#define USB_DEVICE_ID_IBM_USBHUB_KB	0x3005
+
 #define USB_VENDOR_ID_CREATIVELABS	0x062a
 #define USB_DEVICE_ID_CREATIVELABS_SILVERCREST	0x0201
 
@@ -1681,6 +1684,7 @@ static const struct hid_blacklist {
 	{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
 	{ USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVELABS_SILVERCREST, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
+	{ USB_VENDOR_ID_IBM, USB_DEVICE_ID_IBM_USBHUB_KB, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
 	{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
 	{ USB_VENDOR_ID_SILVERCREST, USB_DEVICE_ID_SILVERCREST_KB, HID_QUIRK_NOGET },

drivers/usb/misc/emi26.c

@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/usb.h>
+#include <linux/delay.h>
 
 #define MAX_INTEL_HEX_RECORD_LENGTH 16
 typedef struct _INTEL_HEX_RECORD
@@ -114,6 +115,7 @@ static int emi26_load_firmware (struct usb_device *dev)
 
 	/* De-assert reset (let the CPU run) */
 	err = emi26_set_reset(dev,0);
+	msleep(250);	/* let device settle */
 
 	/* 2. We upload the FPGA firmware into the EMI
 	 * Note: collect up to 1023 (yes!) bytes and send them with
@@ -150,6 +152,7 @@ static int emi26_load_firmware (struct usb_device *dev)
 			goto wraperr;
 		}
 	}
+	msleep(250);	/* let device settle */
 
 	/* De-assert reset (let the CPU run) */
 	err = emi26_set_reset(dev,0);
@@ -192,6 +195,7 @@ static int emi26_load_firmware (struct usb_device *dev)
 		err("%s - error loading firmware: error = %d", __FUNCTION__, err);
 		goto wraperr;
 	}
+	msleep(250);	/* let device settle */
 
 	/* return 1 to fail the driver inialization
 	 * and give real driver change to load */

drivers/usb/misc/emi62.c

@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/usb.h>
+#include <linux/delay.h>
 
 #define MAX_INTEL_HEX_RECORD_LENGTH 16
 typedef struct _INTEL_HEX_RECORD
@@ -123,6 +124,7 @@ static int emi62_load_firmware (struct usb_device *dev)
 
 	/* De-assert reset (let the CPU run) */
 	err = emi62_set_reset(dev,0);
+	msleep(250);	/* let device settle */
 
 	/* 2. We upload the FPGA firmware into the EMI
 	 * Note: collect up to 1023 (yes!) bytes and send them with
@@ -166,6 +168,7 @@ static int emi62_load_firmware (struct usb_device *dev)
 		err("%s - error loading firmware: error = %d", __FUNCTION__, err);
 		goto wraperr;
 	}
+	msleep(250);	/* let device settle */
 
 	/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
 
@@ -228,6 +231,7 @@ static int emi62_load_firmware (struct usb_device *dev)
 		err("%s - error loading firmware: error = %d", __FUNCTION__, err);
 		goto wraperr;
 	}
+	msleep(250);	/* let device settle */
 
 	kfree(buf);
 

drivers/usb/net/pegasus.c

@@ -318,6 +318,8 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
 	set_register(pegasus, PhyCtrl, (indx | PHY_READ));
 	for (i = 0; i < REG_TIMEOUT; i++) {
 		ret = get_registers(pegasus, PhyCtrl, 1, data);
+		if (ret == -ESHUTDOWN)
+			goto fail;
 		if (data[0] & PHY_DONE)
 			break;
 	}
@@ -326,6 +328,7 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
 		*regd = le16_to_cpu(regdi);
 		return ret;
 	}
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 
@@ -354,12 +357,15 @@ static int write_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 regd)
 	set_register(pegasus, PhyCtrl, (indx | PHY_WRITE));
 	for (i = 0; i < REG_TIMEOUT; i++) {
 		ret = get_registers(pegasus, PhyCtrl, 1, data);
+		if (ret == -ESHUTDOWN)
+			goto fail;
 		if (data[0] & PHY_DONE)
 			break;
 	}
 	if (i < REG_TIMEOUT)
 		return ret;
 
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 	return -ETIMEDOUT;
@@ -387,6 +393,8 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
 		ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
 		if (tmp & EPROM_DONE)
 			break;
+		if (ret == -ESHUTDOWN)
+			goto fail;
 	}
 	if (i < REG_TIMEOUT) {
 		ret = get_registers(pegasus, EpromData, 2, &retdatai);
@@ -394,6 +402,7 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
 		return ret;
 	}
 
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 	return -ETIMEDOUT;
@@ -433,12 +442,15 @@ static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data)
 
 	for (i = 0; i < REG_TIMEOUT; i++) {
 		ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
+		if (ret == -ESHUTDOWN)
+			goto fail;
 		if (tmp & EPROM_DONE)
 			break;
 	}
 	disable_eprom_write(pegasus);
 	if (i < REG_TIMEOUT)
 		return ret;
+fail:
 	if (netif_msg_drv(pegasus))
 		dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
 	return -ETIMEDOUT;
@@ -1378,9 +1390,8 @@ static int pegasus_suspend (struct usb_interface *intf, pm_message_t message)
 	struct pegasus *pegasus = usb_get_intfdata(intf);
 	
 	netif_device_detach (pegasus->net);
+	cancel_delayed_work(&pegasus->carrier_check);
 	if (netif_running(pegasus->net)) {
-		cancel_delayed_work(&pegasus->carrier_check);
-
 		usb_kill_urb(pegasus->rx_urb);
 		usb_kill_urb(pegasus->intr_urb);
 	}
@@ -1400,10 +1411,9 @@ static int pegasus_resume (struct usb_interface *intf)
 		pegasus->intr_urb->status = 0;
 		pegasus->intr_urb->actual_length = 0;
 		intr_callback(pegasus->intr_urb, NULL);
-
-		queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
-					CARRIER_CHECK_DELAY);
 	}
+	queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
+				CARRIER_CHECK_DELAY);
 	return 0;
 }
 

drivers/usb/serial/Kconfig

@@ -71,6 +71,16 @@ config USB_SERIAL_ANYDATA
 	  To compile this driver as a module, choose M here: the
 	  module will be called anydata.
 
+config USB_SERIAL_ARK3116
+	tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
+	depends on USB_SERIAL && EXPERIMENTAL
+	help
+	  Say Y here if you want to use a ARK Micro 3116 USB to Serial
+	  device.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ark3116
+
 config USB_SERIAL_BELKIN
 	tristate "USB Belkin and Peracom Single Port Serial Driver"
 	depends on USB_SERIAL

drivers/usb/serial/Makefile

@@ -13,6 +13,7 @@ usbserial-objs	:= usb-serial.o generic.o bus.o $(usbserial-obj-y)
 
 obj-$(CONFIG_USB_SERIAL_AIRPRIME)		+= airprime.o
 obj-$(CONFIG_USB_SERIAL_ANYDATA)		+= anydata.o
+obj-$(CONFIG_USB_SERIAL_ARK3116)		+= ark3116.o
 obj-$(CONFIG_USB_SERIAL_BELKIN)			+= belkin_sa.o
 obj-$(CONFIG_USB_SERIAL_CP2101)			+= cp2101.o
 obj-$(CONFIG_USB_SERIAL_CYBERJACK)		+= cyberjack.o

drivers/usb/serial/airprime.c

@@ -18,6 +18,7 @@
 static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0xf3d, 0x0112) },  /* AirPrime CDMA Wireless PC Card */
 	{ USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
+	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless Aircard 580 */
 	{ },
 };
 MODULE_DEVICE_TABLE(usb, id_table);

drivers/usb/serial/ftdi_sio.c

@@ -307,6 +307,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
 
 
 static struct usb_device_id id_table_combined [] = {
+	{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
@@ -498,6 +499,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
 	{ USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };

drivers/usb/serial/ftdi_sio.h

@@ -32,6 +32,10 @@
 #define FTDI_NF_RIC_PID	0x0001	/* Product Id */
 
 
+/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
+#define FTDI_ACTZWAVE_PID	0xF2D0
+
+
 /* www.irtrans.de device */
 #define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
 
@@ -426,6 +430,11 @@
 #define PAPOUCH_VID			0x5050	/* Vendor ID */
 #define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
 
+/*
+ * ACG Identification Technologies GmbH products (http://www.acg.de/).
+ * Submitted by anton -at- goto10 -dot- org.
+ */
+#define FTDI_ACG_HFDUAL_PID		0xDD20	/* HF Dual ISO Reader (RFID) */
 
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */

drivers/usb/serial/generic.c

@@ -138,6 +138,7 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp)
 
 	return result;
 }
+EXPORT_SYMBOL_GPL(usb_serial_generic_open);
 
 static void generic_cleanup (struct usb_serial_port *port)
 {

drivers/usb/serial/omninet.c

@@ -257,14 +257,14 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
 		return (0);
 	}
 
-	spin_lock(&port->lock);
-	if (port->write_urb_busy) {
-		spin_unlock(&port->lock);
+	spin_lock(&wport->lock);
+	if (wport->write_urb_busy) {
+		spin_unlock(&wport->lock);
 		dbg("%s - already writing", __FUNCTION__);
 		return 0;
 	}
-	port->write_urb_busy = 1;
-	spin_unlock(&port->lock);
+	wport->write_urb_busy = 1;
+	spin_unlock(&wport->lock);
 
 	count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count;
 
@@ -283,7 +283,7 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
 	wport->write_urb->dev = serial->dev;
 	result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
 	if (result) {
-		port->write_urb_busy = 0;
+		wport->write_urb_busy = 0;
 		err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
 	} else
 		result = count;

drivers/usb/serial/usb-serial.c

@@ -189,11 +189,15 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 
 	portNumber = tty->index - serial->minor;
 	port = serial->port[portNumber];
-	if (!port)
-		return -ENODEV;
+	if (!port) {
+		retval = -ENODEV;
+		goto bailout_kref_put;
+	}
 
-	if (mutex_lock_interruptible(&port->mutex))
-		return -ERESTARTSYS;
+	if (mutex_lock_interruptible(&port->mutex)) {
+		retval = -ERESTARTSYS;
+		goto bailout_kref_put;
+	}
 	 
 	++port->open_count;
 
@@ -209,7 +213,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 		 * safe because we are called with BKL held */
 		if (!try_module_get(serial->type->driver.owner)) {
 			retval = -ENODEV;
-			goto bailout_kref_put;
+			goto bailout_mutex_unlock;
 		}
 
 		/* only call the device specific open if this 
@@ -224,10 +228,11 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
 
 bailout_module_put:
 	module_put(serial->type->driver.owner);
-bailout_kref_put:
-	kref_put(&serial->kref, destroy_serial);
+bailout_mutex_unlock:
 	port->open_count = 0;
 	mutex_unlock(&port->mutex);
+bailout_kref_put:
+	kref_put(&serial->kref, destroy_serial);
 	return retval;
 }