Commit 0d38edda authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  [PATCH] USB: fix omninet driver bug
  [PATCH] USB: add ark3116 usb to serial driver
  [PATCH] usbserial: Fixes leak in serial_open() error path.
  [PATCH] usbserial: Fixes use-after-free in serial_open().
  [PATCH] USB: Emagic USB firmware loading fixes
  [PATCH] USB: add an IBM USB keyboard to the HID_QUIRK_NOGET blacklist
  [PATCH] USB: Add Sieraa Wireless 580 evdo card to airprime.c
  [PATCH] USB: ftdi_sio: add device id for ACT Solutions HomePro ZWave interface
  [PATCH] USB: ftdi_sio: Add support for HCG HF Dual ISO RFID Reader
  [PATCH] USB: ub oops in block_uevent
  [PATCH] USB: usbcore: don't check the device's power source
  [PATCH] USB: fix OHCI PM regression
  [PATCH] USB: pegasus fixes (logstorm, suspend)
  [PATCH] USBATM: fix modinfo output
  [PATCH] USBATM: change the default speedtouch iso altsetting
  [PATCH] USB: fix bug in ohci-hcd.c ohci_restart()
parents 1a2acc9e df3fccb1
......@@ -536,6 +536,9 @@ static void ub_cleanup(struct ub_dev *sc)
kfree(lun);
}
usb_set_intfdata(sc->intf, NULL);
usb_put_intf(sc->intf);
usb_put_dev(sc->dev);
kfree(sc);
}
......@@ -2221,7 +2224,12 @@ static int ub_probe(struct usb_interface *intf,
// sc->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
usb_set_intfdata(intf, sc);
usb_get_dev(sc->dev);
// usb_get_intf(sc->intf); /* Do we need this? */
/*
* Since we give the interface struct to the block level through
* disk->driverfs_dev, we have to pin it. Otherwise, block_uevent
* oopses on close after a disconnect (kernels 2.6.16 and up).
*/
usb_get_intf(sc->intf);
snprintf(sc->name, 12, DRV_NAME "(%d.%d)",
sc->dev->bus->busnum, sc->dev->devnum);
......@@ -2286,7 +2294,7 @@ static int ub_probe(struct usb_interface *intf,
err_dev_desc:
usb_set_intfdata(intf, NULL);
// usb_put_intf(sc->intf);
usb_put_intf(sc->intf);
usb_put_dev(sc->dev);
kfree(sc);
err_core:
......@@ -2461,12 +2469,6 @@ static void ub_disconnect(struct usb_interface *intf)
* and no URBs left in transit.
*/
usb_set_intfdata(intf, NULL);
// usb_put_intf(sc->intf);
sc->intf = NULL;
usb_put_dev(sc->dev);
sc->dev = NULL;
ub_put(sc);
}
......
......@@ -69,7 +69,7 @@ static const char speedtch_driver_name[] = "speedtch";
#define RESUBMIT_DELAY 1000 /* milliseconds */
#define DEFAULT_BULK_ALTSETTING 1
#define DEFAULT_ISOC_ALTSETTING 2
#define DEFAULT_ISOC_ALTSETTING 3
#define DEFAULT_DL_512_FIRST 0
#define DEFAULT_ENABLE_ISOC 0
#define DEFAULT_SW_BUFFERING 0
......
......@@ -99,11 +99,11 @@ static const char usbatm_driver_name[] = "usbatm";
#define UDSL_MAX_RCV_URBS 16
#define UDSL_MAX_SND_URBS 16
#define UDSL_MAX_BUF_SIZE 64 * 1024 /* bytes */
#define UDSL_MAX_BUF_SIZE 65536
#define UDSL_DEFAULT_RCV_URBS 4
#define UDSL_DEFAULT_SND_URBS 4
#define UDSL_DEFAULT_RCV_BUF_SIZE 64 * ATM_CELL_SIZE /* bytes */
#define UDSL_DEFAULT_SND_BUF_SIZE 64 * ATM_CELL_SIZE /* bytes */
#define UDSL_DEFAULT_RCV_BUF_SIZE 3392 /* 64 * ATM_CELL_SIZE */
#define UDSL_DEFAULT_SND_BUF_SIZE 3392 /* 64 * ATM_CELL_SIZE */
#define ATM_CELL_HEADER (ATM_CELL_SIZE - ATM_CELL_PAYLOAD)
......@@ -135,7 +135,7 @@ MODULE_PARM_DESC(rcv_buf_bytes,
module_param(snd_buf_bytes, uint, S_IRUGO);
MODULE_PARM_DESC(snd_buf_bytes,
"Size of the buffers used for transmission, in bytes (range: 1-"
__MODULE_STRING(UDSL_MAX_SND_BUF_SIZE) ", default: "
__MODULE_STRING(UDSL_MAX_BUF_SIZE) ", default: "
__MODULE_STRING(UDSL_DEFAULT_SND_BUF_SIZE) ")");
......
......@@ -1805,6 +1805,12 @@ int usb_add_hcd(struct usb_hcd *hcd,
USB_SPEED_FULL;
hcd->self.root_hub = rhdev;
/* wakeup flag init defaults to "everything works" for root hubs,
* but drivers can override it in reset() if needed, along with
* recording the overall controller's system wakeup capability.
*/
device_init_wakeup(&rhdev->dev, 1);
/* "reset" is misnamed; its role is now one-time init. the controller
* should already have been reset (and boot firmware kicked off etc).
*/
......@@ -1813,13 +1819,6 @@ int usb_add_hcd(struct usb_hcd *hcd,
goto err_hcd_driver_setup;
}
/* wakeup flag init is in transition; for now we can't rely on PCI to
* initialize these bits properly, so we let reset() override it.
* This init should _precede_ the reset() once PCI behaves.
*/
device_init_wakeup(&rhdev->dev,
device_can_wakeup(hcd->self.controller));
/* NOTE: root hub and controller capabilities may not be the same */
if (device_can_wakeup(hcd->self.controller)
&& device_can_wakeup(&hcd->self.root_hub->dev))
......
......@@ -1168,19 +1168,9 @@ static inline const char *plural(int n)
static int choose_configuration(struct usb_device *udev)
{
int i;
u16 devstatus;
int bus_powered;
int num_configs;
struct usb_host_config *c, *best;
/* If this fails, assume the device is bus-powered */
devstatus = 0;
usb_get_status(udev, USB_RECIP_DEVICE, 0, &devstatus);
le16_to_cpus(&devstatus);
bus_powered = ((devstatus & (1 << USB_DEVICE_SELF_POWERED)) == 0);
dev_dbg(&udev->dev, "device is %s-powered\n",
bus_powered ? "bus" : "self");
best = NULL;
c = udev->config;
num_configs = udev->descriptor.bNumConfigurations;
......@@ -1197,6 +1187,19 @@ static int choose_configuration(struct usb_device *udev)
* similar errors in their descriptors. If the next test
* were allowed to execute, such configurations would always
* be rejected and the devices would not work as expected.
* In the meantime, we run the risk of selecting a config
* that requires external power at a time when that power
* isn't available. It seems to be the lesser of two evils.
*
* Bugzilla #6448 reports a device that appears to crash
* when it receives a GET_DEVICE_STATUS request! We don't
* have any other way to tell whether a device is self-powered,
* but since we don't use that information anywhere but here,
* the call has been removed.
*
* Maybe the GET_DEVICE_STATUS call and the test below can
* be reinstated when device firmwares become more reliable.
* Don't hold your breath.
*/
#if 0
/* Rule out self-powered configs for a bus-powered device */
......
......@@ -863,7 +863,7 @@ static int ohci_restart (struct ohci_hcd *ohci)
i = ohci->num_ports;
while (i--)
ohci_writel (ohci, RH_PS_PSS,
&ohci->regs->roothub.portstatus [temp]);
&ohci->regs->roothub.portstatus [i]);
ohci_dbg (ohci, "restart complete\n");
}
return 0;
......
......@@ -1557,6 +1557,9 @@ void hid_init_reports(struct hid_device *hid)
#define USB_VENDOR_ID_HP 0x03f0
#define USB_DEVICE_ID_HP_USBHUB_KB 0x020c
#define USB_VENDOR_ID_IBM 0x04b3
#define USB_DEVICE_ID_IBM_USBHUB_KB 0x3005
#define USB_VENDOR_ID_CREATIVELABS 0x062a
#define USB_DEVICE_ID_CREATIVELABS_SILVERCREST 0x0201
......@@ -1681,6 +1684,7 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_USBHUB_KB, HID_QUIRK_NOGET},
{ USB_VENDOR_ID_CREATIVELABS, USB_DEVICE_ID_CREATIVELABS_SILVERCREST, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_HP, USB_DEVICE_ID_HP_USBHUB_KB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_IBM, USB_DEVICE_ID_IBM_USBHUB_KB, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_TANGTOP, USB_DEVICE_ID_TANGTOP_USBPS2, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_DUAL_USB_JOYPAD, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_SILVERCREST, USB_DEVICE_ID_SILVERCREST_KB, HID_QUIRK_NOGET },
......
......@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/usb.h>
#include <linux/delay.h>
#define MAX_INTEL_HEX_RECORD_LENGTH 16
typedef struct _INTEL_HEX_RECORD
......@@ -114,6 +115,7 @@ static int emi26_load_firmware (struct usb_device *dev)
/* De-assert reset (let the CPU run) */
err = emi26_set_reset(dev,0);
msleep(250); /* let device settle */
/* 2. We upload the FPGA firmware into the EMI
* Note: collect up to 1023 (yes!) bytes and send them with
......@@ -150,6 +152,7 @@ static int emi26_load_firmware (struct usb_device *dev)
goto wraperr;
}
}
msleep(250); /* let device settle */
/* De-assert reset (let the CPU run) */
err = emi26_set_reset(dev,0);
......@@ -192,6 +195,7 @@ static int emi26_load_firmware (struct usb_device *dev)
err("%s - error loading firmware: error = %d", __FUNCTION__, err);
goto wraperr;
}
msleep(250); /* let device settle */
/* return 1 to fail the driver inialization
* and give real driver change to load */
......
......@@ -15,6 +15,7 @@
#include <linux/init.h>
#include <linux/module.h>
#include <linux/usb.h>
#include <linux/delay.h>
#define MAX_INTEL_HEX_RECORD_LENGTH 16
typedef struct _INTEL_HEX_RECORD
......@@ -123,6 +124,7 @@ static int emi62_load_firmware (struct usb_device *dev)
/* De-assert reset (let the CPU run) */
err = emi62_set_reset(dev,0);
msleep(250); /* let device settle */
/* 2. We upload the FPGA firmware into the EMI
* Note: collect up to 1023 (yes!) bytes and send them with
......@@ -166,6 +168,7 @@ static int emi62_load_firmware (struct usb_device *dev)
err("%s - error loading firmware: error = %d", __FUNCTION__, err);
goto wraperr;
}
msleep(250); /* let device settle */
/* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
......@@ -228,6 +231,7 @@ static int emi62_load_firmware (struct usb_device *dev)
err("%s - error loading firmware: error = %d", __FUNCTION__, err);
goto wraperr;
}
msleep(250); /* let device settle */
kfree(buf);
......
......@@ -318,6 +318,8 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
set_register(pegasus, PhyCtrl, (indx | PHY_READ));
for (i = 0; i < REG_TIMEOUT; i++) {
ret = get_registers(pegasus, PhyCtrl, 1, data);
if (ret == -ESHUTDOWN)
goto fail;
if (data[0] & PHY_DONE)
break;
}
......@@ -326,6 +328,7 @@ static int read_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 * regd)
*regd = le16_to_cpu(regdi);
return ret;
}
fail:
if (netif_msg_drv(pegasus))
dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
......@@ -354,12 +357,15 @@ static int write_mii_word(pegasus_t * pegasus, __u8 phy, __u8 indx, __u16 regd)
set_register(pegasus, PhyCtrl, (indx | PHY_WRITE));
for (i = 0; i < REG_TIMEOUT; i++) {
ret = get_registers(pegasus, PhyCtrl, 1, data);
if (ret == -ESHUTDOWN)
goto fail;
if (data[0] & PHY_DONE)
break;
}
if (i < REG_TIMEOUT)
return ret;
fail:
if (netif_msg_drv(pegasus))
dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
return -ETIMEDOUT;
......@@ -387,6 +393,8 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
if (tmp & EPROM_DONE)
break;
if (ret == -ESHUTDOWN)
goto fail;
}
if (i < REG_TIMEOUT) {
ret = get_registers(pegasus, EpromData, 2, &retdatai);
......@@ -394,6 +402,7 @@ static int read_eprom_word(pegasus_t * pegasus, __u8 index, __u16 * retdata)
return ret;
}
fail:
if (netif_msg_drv(pegasus))
dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
return -ETIMEDOUT;
......@@ -433,12 +442,15 @@ static int write_eprom_word(pegasus_t * pegasus, __u8 index, __u16 data)
for (i = 0; i < REG_TIMEOUT; i++) {
ret = get_registers(pegasus, EpromCtrl, 1, &tmp);
if (ret == -ESHUTDOWN)
goto fail;
if (tmp & EPROM_DONE)
break;
}
disable_eprom_write(pegasus);
if (i < REG_TIMEOUT)
return ret;
fail:
if (netif_msg_drv(pegasus))
dev_warn(&pegasus->intf->dev, "fail %s\n", __FUNCTION__);
return -ETIMEDOUT;
......@@ -1378,9 +1390,8 @@ static int pegasus_suspend (struct usb_interface *intf, pm_message_t message)
struct pegasus *pegasus = usb_get_intfdata(intf);
netif_device_detach (pegasus->net);
if (netif_running(pegasus->net)) {
cancel_delayed_work(&pegasus->carrier_check);
if (netif_running(pegasus->net)) {
usb_kill_urb(pegasus->rx_urb);
usb_kill_urb(pegasus->intr_urb);
}
......@@ -1400,10 +1411,9 @@ static int pegasus_resume (struct usb_interface *intf)
pegasus->intr_urb->status = 0;
pegasus->intr_urb->actual_length = 0;
intr_callback(pegasus->intr_urb, NULL);
}
queue_delayed_work(pegasus_workqueue, &pegasus->carrier_check,
CARRIER_CHECK_DELAY);
}
return 0;
}
......
......@@ -71,6 +71,16 @@ config USB_SERIAL_ANYDATA
To compile this driver as a module, choose M here: the
module will be called anydata.
config USB_SERIAL_ARK3116
tristate "USB ARK Micro 3116 USB Serial Driver (EXPERIMENTAL)"
depends on USB_SERIAL && EXPERIMENTAL
help
Say Y here if you want to use a ARK Micro 3116 USB to Serial
device.
To compile this driver as a module, choose M here: the
module will be called ark3116
config USB_SERIAL_BELKIN
tristate "USB Belkin and Peracom Single Port Serial Driver"
depends on USB_SERIAL
......
......@@ -13,6 +13,7 @@ usbserial-objs := usb-serial.o generic.o bus.o $(usbserial-obj-y)
obj-$(CONFIG_USB_SERIAL_AIRPRIME) += airprime.o
obj-$(CONFIG_USB_SERIAL_ANYDATA) += anydata.o
obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o
obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o
obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o
obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o
......
......@@ -18,6 +18,7 @@
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0xf3d, 0x0112) }, /* AirPrime CDMA Wireless PC Card */
{ USB_DEVICE(0x1410, 0x1110) }, /* Novatel Wireless Merlin CDMA */
{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless Aircard 580 */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
......
/*
* ark3116
* - implements a driver for the arkmicro ark3116 chipset (vendor=0x6547,
* productid=0x0232) (used in a datacable called KQ-U8A)
*
* - based on code by krisfx -> thanks !!
* (see http://www.linuxquestions.org/questions/showthread.php?p=2184457#post2184457)
*
* - based on logs created by usbsnoopy
*
* Author : Simon Schulz [ark3116_driver<AT>auctionant.de]
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usb-serial.h"
static int debug;
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x6547, 0x0232) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
struct ark3116_private {
spinlock_t lock;
u8 termios_initialized;
};
static inline void ARK3116_SND(struct usb_serial *serial, int seq,
__u8 request, __u8 requesttype,
__u16 value, __u16 index)
{
int result;
result = usb_control_msg(serial->dev,
usb_sndctrlpipe(serial->dev,0),
request, requesttype, value, index,
NULL,0x00, 1000);
dbg("%03d > ok",seq);
}
static inline void ARK3116_RCV(struct usb_serial *serial, int seq,
__u8 request, __u8 requesttype,
__u16 value, __u16 index, __u8 expected,
char *buf)
{
int result;
result = usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev,0),
request, requesttype, value, index,
buf, 0x0000001, 1000);
if (result)
dbg("%03d < %d bytes [0x%02X]",seq, result, buf[0]);
else
dbg("%03d < 0 bytes", seq);
}
static inline void ARK3116_RCV_QUIET(struct usb_serial *serial,
__u8 request, __u8 requesttype,
__u16 value, __u16 index, char *buf)
{
usb_control_msg(serial->dev,
usb_rcvctrlpipe(serial->dev,0),
request, requesttype, value, index,
buf, 0x0000001, 1000);
}
static int ark3116_attach(struct usb_serial *serial)
{
char *buf;
struct ark3116_private *priv;
int i;
for (i = 0; i < serial->num_ports; ++i) {
priv = kmalloc (sizeof (struct ark3116_private), GFP_KERNEL);
if (!priv)
goto cleanup;
memset (priv, 0x00, sizeof (struct ark3116_private));
spin_lock_init(&priv->lock);
usb_set_serial_port_data(serial->port[i], priv);
}
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
dbg("error kmalloc -> out of mem ?");
goto cleanup;
}
/* 3 */
ARK3116_SND(serial, 3,0xFE,0x40,0x0008,0x0002);
ARK3116_SND(serial, 4,0xFE,0x40,0x0008,0x0001);
ARK3116_SND(serial, 5,0xFE,0x40,0x0000,0x0008);
ARK3116_SND(serial, 6,0xFE,0x40,0x0000,0x000B);
/* <-- seq7 */
ARK3116_RCV(serial, 7,0xFE,0xC0,0x0000,0x0003, 0x00, buf);
ARK3116_SND(serial, 8,0xFE,0x40,0x0080,0x0003);
ARK3116_SND(serial, 9,0xFE,0x40,0x001A,0x0000);
ARK3116_SND(serial,10,0xFE,0x40,0x0000,0x0001);
ARK3116_SND(serial,11,0xFE,0x40,0x0000,0x0003);
/* <-- seq12 */
ARK3116_RCV(serial,12,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
ARK3116_SND(serial,13,0xFE,0x40,0x0000,0x0004);
/* 14 */
ARK3116_RCV(serial,14,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
ARK3116_SND(serial,15,0xFE,0x40,0x0000,0x0004);
/* 16 */
ARK3116_RCV(serial,16,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
/* --> seq17 */
ARK3116_SND(serial,17,0xFE,0x40,0x0001,0x0004);
/* <-- seq18 */
ARK3116_RCV(serial,18,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
/* --> seq19 */
ARK3116_SND(serial,19,0xFE,0x40,0x0003,0x0004);
/* <-- seq20 */
/* seems like serial port status info (RTS, CTS,...) */
/* returns modem control line status ?! */
ARK3116_RCV(serial,20,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
/* set 9600 baud & do some init ?! */
ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
ARK3116_SND(serial,148,0xFE,0x40,0x0038,0x0000);
ARK3116_SND(serial,149,0xFE,0x40,0x0001,0x0001);
ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
ARK3116_SND(serial,154,0xFE,0x40,0x0003,0x0003);
kfree(buf);
return(0);
cleanup:
for (--i; i>=0; --i)
usb_set_serial_port_data(serial->port[i], NULL);
return -ENOMEM;
}
static void ark3116_set_termios(struct usb_serial_port *port,
struct termios *old_termios)
{
struct usb_serial *serial = port->serial;
struct ark3116_private *priv = usb_get_serial_port_data(port);
unsigned int cflag = port->tty->termios->c_cflag;
unsigned long flags;
int baud;
int ark3116_baud;
char *buf;
char config;
config = 0;
dbg("%s - port %d", __FUNCTION__, port->number);
if ((!port->tty) || (!port->tty->termios)) {
dbg("%s - no tty structures", __FUNCTION__);
return;
}
spin_lock_irqsave(&priv->lock, flags);
if (!priv->termios_initialized) {
*(port->tty->termios) = tty_std_termios;
port->tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
priv->termios_initialized = 1;
}
spin_unlock_irqrestore(&priv->lock, flags);
cflag = port->tty->termios->c_cflag;
/* check that they really want us to change something: */
if (old_termios) {
if ((cflag == old_termios->c_cflag) &&
(RELEVANT_IFLAG(port->tty->termios->c_iflag) ==
RELEVANT_IFLAG(old_termios->c_iflag))) {
dbg("%s - nothing to change...", __FUNCTION__);
return;
}
}
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
dbg("error kmalloc");
return;
}
/* set data bit count (8/7/6/5) */
if (cflag & CSIZE){
switch (cflag & CSIZE){
case CS5:
config |= 0x00;
dbg("setting CS5");
break;
case CS6:
config |= 0x01;
dbg("setting CS6");
break;
case CS7:
config |= 0x02;
dbg("setting CS7");
break;
default:
err ("CSIZE was set but not CS5-CS8, using CS8!");
case CS8:
config |= 0x03;
dbg("setting CS8");
break;
}
}
/* set parity (NONE,EVEN,ODD) */
if (cflag & PARENB){
if (cflag & PARODD) {
config |= 0x08;
dbg("setting parity to ODD");
} else {
config |= 0x18;
dbg("setting parity to EVEN");
}
} else {
dbg("setting parity to NONE");
}
/* SET STOPBIT (1/2) */
if (cflag & CSTOPB) {
config |= 0x04;
dbg ("setting 2 stop bits");
} else {
dbg ("setting 1 stop bit");
}
/* set baudrate: */
baud = 0;
switch (cflag & CBAUD){
case B0:
err("can't set 0baud, using 9600 instead");
break;
case B75: baud = 75; break;
case B150: baud = 150; break;
case B300: baud = 300; break;
case B600: baud = 600; break;
case B1200: baud = 1200; break;
case B1800: baud = 1800; break;
case B2400: baud = 2400; break;
case B4800: baud = 4800; break;
case B9600: baud = 9600; break;
case B19200: baud = 19200; break;
case B38400: baud = 38400; break;
case B57600: baud = 57600; break;
case B115200: baud = 115200; break;
case B230400: baud = 230400; break;
case B460800: baud = 460800; break;
default:
dbg("does not support the baudrate requested (fix it)");
break;
}
/* set 9600 as default (if given baudrate is invalid for example) */
if (baud == 0)
baud = 9600;
/*
* found by try'n'error, be careful, maybe there are other options
* for multiplicator etc!
*/
if (baud == 460800)
/* strange, for 460800 the formula is wrong
* (dont use round(), then 9600baud is wrong) */
ark3116_baud = 7;
else
ark3116_baud = 3000000 / baud;
/* ? */
ARK3116_RCV(serial,0,0xFE,0xC0,0x0000,0x0003, 0x03, buf);
/* offset = buf[0]; */
/* offset = 0x03; */
/* dbg("using 0x%04X as target for 0x0003:",0x0080+offset); */
/* set baudrate */
dbg("setting baudrate to %d (->reg=%d)",baud,ark3116_baud);
ARK3116_SND(serial,147,0xFE,0x40,0x0083,0x0003);
ARK3116_SND(serial,148,0xFE,0x40,(ark3116_baud & 0x00FF) ,0x0000);
ARK3116_SND(serial,149,0xFE,0x40,(ark3116_baud & 0xFF00)>>8,0x0001);
ARK3116_SND(serial,150,0xFE,0x40,0x0003,0x0003);
/* ? */
ARK3116_RCV(serial,151,0xFE,0xC0,0x0000,0x0004,0x03, buf);
ARK3116_SND(serial,152,0xFE,0x40,0x0000,0x0003);
/* set data bit count, stop bit count & parity: */
dbg("updating bit count, stop bit or parity (cfg=0x%02X)", config);
ARK3116_RCV(serial,153,0xFE,0xC0,0x0000,0x0003,0x00, buf);
ARK3116_SND(serial,154,0xFE,0x40,config,0x0003);
if (cflag & CRTSCTS)
dbg("CRTSCTS not supported by chipset ?!");
/* TEST ARK3116_SND(154,0xFE,0x40,0xFFFF, 0x0006); */
kfree(buf);
return;
}
static int ark3116_open(struct usb_serial_port *port, struct file *filp)
{
struct termios tmp_termios;
struct usb_serial *serial = port->serial;
char *buf;
int result = 0;
dbg("%s - port %d", __FUNCTION__, port->number);
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
dbg("error kmalloc -> out of mem ?");
return -ENOMEM;
}
result = usb_serial_generic_open(port, filp);
if (result)
return result;
/* open */
ARK3116_RCV(serial,111,0xFE,0xC0,0x0000,0x0003, 0x02, buf);
ARK3116_SND(serial,112,0xFE,0x40,0x0082,0x0003);
ARK3116_SND(serial,113,0xFE,0x40,0x001A,0x0000);
ARK3116_SND(serial,114,0xFE,0x40,0x0000,0x0001);
ARK3116_SND(serial,115,0xFE,0x40,0x0002,0x0003);
ARK3116_RCV(serial,116,0xFE,0xC0,0x0000,0x0004, 0x03, buf);
ARK3116_SND(serial,117,0xFE,0x40,0x0002,0x0004);
ARK3116_RCV(serial,118,0xFE,0xC0,0x0000,0x0004, 0x02, buf);
ARK3116_SND(serial,119,0xFE,0x40,0x0000,0x0004);
ARK3116_RCV(serial,120,0xFE,0xC0,0x0000,0x0004, 0x00, buf);
ARK3116_SND(serial,121,0xFE,0x40,0x0001,0x0004);
ARK3116_RCV(serial,122,0xFE,0xC0,0x0000,0x0004, 0x01, buf);
ARK3116_SND(serial,123,0xFE,0x40,0x0003,0x0004);
/* returns different values (control lines ?!) */
ARK3116_RCV(serial,124,0xFE,0xC0,0x0000,0x0006, 0xFF, buf);
/* initialise termios: */
if (port->tty)
ark3116_set_termios(port, &tmp_termios);
kfree(buf);
return result;
}
static int ark3116_ioctl(struct usb_serial_port *port, struct file *file,
unsigned int cmd, unsigned long arg)
{
dbg("ioctl not supported yet...");
return -ENOIOCTLCMD;
}
static int ark3116_tiocmget(struct usb_serial_port *port, struct file *file)
{
struct usb_serial *serial = port->serial;
char *buf;
char temp;
/* seems like serial port status info (RTS, CTS,...) is stored
* in reg(?) 0x0006
* pcb connection point 11 = GND -> sets bit4 of response
* pcb connection point 7 = GND -> sets bit6 of response
*/
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
dbg("error kmalloc");
return -ENOMEM;
}
/* read register: */
ARK3116_RCV_QUIET(serial,0xFE,0xC0,0x0000,0x0006,buf);
temp = buf[0];
kfree(buf);
/* i do not really know if bit4=CTS and bit6=DSR... was just a
* quick guess !!
*/
return (temp & (1<<4) ? TIOCM_CTS : 0) |
(temp & (1<<6) ? TIOCM_DSR : 0);
}
static struct usb_driver ark3116_driver = {
.name = "ark3116",
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
};
static struct usb_serial_driver ark3116_device = {
.driver = {
.owner = THIS_MODULE,
.name = "ark3116",
},
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.num_bulk_out = 1,
.num_ports = 1,
.attach = ark3116_attach,
.set_termios = ark3116_set_termios,
.ioctl = ark3116_ioctl,
.tiocmget = ark3116_tiocmget,
.open = ark3116_open,
};
static int __init ark3116_init(void)
{
int retval;
retval = usb_serial_register(&ark3116_device);
if (retval)
return retval;
retval = usb_register(&ark3116_driver);
if (retval)
usb_serial_deregister(&ark3116_device);
return retval;
}
static void __exit ark3116_exit(void)
{
usb_deregister(&ark3116_driver);
usb_serial_deregister(&ark3116_device);
}
module_init(ark3116_init);
module_exit(ark3116_exit);
MODULE_LICENSE("GPL");
module_param(debug, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(debug, "Debug enabled or not");
......@@ -307,6 +307,7 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_ACTZWAVE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IRTRANS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_IPLUS_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_SIO_PID) },
......@@ -498,6 +499,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) },
{ USB_DEVICE(ICOM_ID1_VID, ICOM_ID1_PID) },
{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_TMU_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ACG_HFDUAL_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
......
......@@ -32,6 +32,10 @@
#define FTDI_NF_RIC_PID 0x0001 /* Product Id */
/* ACT Solutions HomePro ZWave interface (http://www.act-solutions.com/HomePro.htm) */
#define FTDI_ACTZWAVE_PID 0xF2D0
/* www.irtrans.de device */
#define FTDI_IRTRANS_PID 0xFC60 /* Product Id */
......@@ -426,6 +430,11 @@
#define PAPOUCH_VID 0x5050 /* Vendor ID */
#define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */
/*
* ACG Identification Technologies GmbH products (http://www.acg.de/).
* Submitted by anton -at- goto10 -dot- org.
*/
#define FTDI_ACG_HFDUAL_PID 0xDD20 /* HF Dual ISO Reader (RFID) */
/* Commands */
#define FTDI_SIO_RESET 0 /* Reset the port */
......
......@@ -138,6 +138,7 @@ int usb_serial_generic_open (struct usb_serial_port *port, struct file *filp)
return result;
}
EXPORT_SYMBOL_GPL(usb_serial_generic_open);
static void generic_cleanup (struct usb_serial_port *port)
{
......
......@@ -257,14 +257,14 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
return (0);
}
spin_lock(&port->lock);
if (port->write_urb_busy) {
spin_unlock(&port->lock);
spin_lock(&wport->lock);
if (wport->write_urb_busy) {
spin_unlock(&wport->lock);
dbg("%s - already writing", __FUNCTION__);
return 0;
}
port->write_urb_busy = 1;
spin_unlock(&port->lock);
wport->write_urb_busy = 1;
spin_unlock(&wport->lock);
count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count;
......@@ -283,7 +283,7 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
wport->write_urb->dev = serial->dev;
result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
if (result) {
port->write_urb_busy = 0;
wport->write_urb_busy = 0;
err("%s - failed submitting write urb, error %d", __FUNCTION__, result);
} else
result = count;
......
......@@ -189,11 +189,15 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
portNumber = tty->index - serial->minor;
port = serial->port[portNumber];
if (!port)
return -ENODEV;
if (!port) {
retval = -ENODEV;
goto bailout_kref_put;
}
if (mutex_lock_interruptible(&port->mutex))
return -ERESTARTSYS;
if (mutex_lock_interruptible(&port->mutex)) {
retval = -ERESTARTSYS;
goto bailout_kref_put;
}
++port->open_count;
......@@ -209,7 +213,7 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
* safe because we are called with BKL held */
if (!try_module_get(serial->type->driver.owner)) {
retval = -ENODEV;
goto bailout_kref_put;
goto bailout_mutex_unlock;
}
/* only call the device specific open if this
......@@ -224,10 +228,11 @@ static int serial_open (struct tty_struct *tty, struct file * filp)
bailout_module_put:
module_put(serial->type->driver.owner);
bailout_kref_put:
kref_put(&serial->kref, destroy_serial);
bailout_mutex_unlock:
port->open_count = 0;
mutex_unlock(&port->mutex);
bailout_kref_put:
kref_put(&serial->kref, destroy_serial);
return retval;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment