Commit 0dc726bb authored by Eric Miao's avatar Eric Miao

[ARM] pxa: move board board IRQ definitions out of irqs.h

Signed-off-by: default avatarEric Miao <eric.y.miao@gmail.com>
parent 19851c58
......@@ -75,6 +75,18 @@ extern unsigned long it8152_base_address;
IT8152_PD_IRQ(1) USB (USBR)
IT8152_PD_IRQ(0) Audio controller (ACR)
*/
#define IT8152_IRQ(x) (IRQ_BOARD_END + (x))
/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
#define IT8152_LD_IRQ_COUNT 9
#define IT8152_LP_IRQ_COUNT 16
#define IT8152_PD_IRQ_COUNT 15
/* Priorities: */
#define IT8152_PD_IRQ(i) IT8152_IRQ(i)
#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
/* frequently used interrupts */
#define IT8152_PCISERR IT8152_PD_IRQ(14)
#define IT8152_H2PTADR IT8152_PD_IRQ(13)
......
......@@ -129,6 +129,16 @@ enum balloon3_features {
#define CPLD_AROUTING_LOONR2INT_BIT 6
#define CPLD_AROUTING_LOONR2EXT_BIT 7
/* Balloon3 Interrupts */
#define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x))
#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
extern int balloon3_has(enum balloon3_features feature);
#endif
......@@ -150,74 +150,9 @@
#define NR_IRQS (IRQ_BOARD_START)
#endif
/*
* Board specific IRQs. Define them here.
* Do not surround them with ifdefs.
*/
#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x))
#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0)
#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1)
#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */
#define LUBBOCK_ETH_IRQ LUBBOCK_IRQ(3)
#define LUBBOCK_UCB1400_IRQ LUBBOCK_IRQ(4)
#define LUBBOCK_BB_IRQ LUBBOCK_IRQ(5)
#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
#define LPD270_IRQ(x) (IRQ_BOARD_START + (x))
#define LPD270_USBC_IRQ LPD270_IRQ(2)
#define LPD270_ETHERNET_IRQ LPD270_IRQ(3)
#define LPD270_AC97_IRQ LPD270_IRQ(4)
#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x))
#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0)
#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1)
#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2)
#define MAINSTONE_ETHERNET_IRQ MAINSTONE_IRQ(3)
#define MAINSTONE_AC97_IRQ MAINSTONE_IRQ(4)
#define MAINSTONE_PEN_IRQ MAINSTONE_IRQ(5)
#define MAINSTONE_MSINS_IRQ MAINSTONE_IRQ(6)
#define MAINSTONE_EXBRD_IRQ MAINSTONE_IRQ(7)
#define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9)
#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10)
#define MAINSTONE_S0_IRQ MAINSTONE_IRQ(11)
#define MAINSTONE_S1_CD_IRQ MAINSTONE_IRQ(13)
#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
/* Balloon3 Interrupts */
#define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x))
#define BALLOON3_BP_CF_NRDY_IRQ BALLOON3_IRQ(0)
#define BALLOON3_BP_NSTSCHG_IRQ BALLOON3_IRQ(1)
#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
/* phyCORE-PXA270 (PCM027) Interrupts */
#define PCM027_IRQ(x) (IRQ_BOARD_START + (x))
#define PCM027_BTDET_IRQ PCM027_IRQ(0)
#define PCM027_FF_RI_IRQ PCM027_IRQ(1)
#define PCM027_MMCDET_IRQ PCM027_IRQ(2)
#define PCM027_PM_5V_IRQ PCM027_IRQ(3)
/* ITE8152 irqs */
/* add IT8152 IRQs beyond BOARD_END */
#ifdef CONFIG_PCI_HOST_ITE8152
#define IT8152_IRQ(x) (IRQ_BOARD_END + (x))
/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
#define IT8152_LD_IRQ_COUNT 9
#define IT8152_LP_IRQ_COUNT 16
#define IT8152_PD_IRQ_COUNT 15
/* Priorities: */
#define IT8152_PD_IRQ(i) IT8152_IRQ(i)
#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
#define IT8152_LAST_IRQ IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
#define IT8152_LAST_IRQ (IRQ_BOARD_END + 40)
#if NR_IRQS < (IT8152_LAST_IRQ+1)
#undef NR_IRQS
......
......@@ -34,5 +34,9 @@
#define LPD270_INT_ETHERNET (1 << 3) /* Ethernet controller IRQ */
#define LPD270_INT_USBC (1 << 2) /* USB client cable detection IRQ */
#define LPD270_IRQ(x) (IRQ_BOARD_START + (x))
#define LPD270_USBC_IRQ LPD270_IRQ(2)
#define LPD270_ETHERNET_IRQ LPD270_IRQ(3)
#define LPD270_AC97_IRQ LPD270_IRQ(4)
#endif
......@@ -34,6 +34,17 @@
#define LUB_IRQ_SET_CLR __LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
#define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
/* Board specific IRQs */
#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x))
#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0)
#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1)
#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */
#define LUBBOCK_ETH_IRQ LUBBOCK_IRQ(3)
#define LUBBOCK_UCB1400_IRQ LUBBOCK_IRQ(4)
#define LUBBOCK_BB_IRQ LUBBOCK_IRQ(5)
#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
#ifndef __ASSEMBLY__
extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
#endif
......@@ -117,4 +117,21 @@
#define MST_PCMCIA_PWR_VCC_33 0x8 /* voltage VCC = 3.3V */
#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */
/* board specific IRQs */
#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x))
#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0)
#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1)
#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2)
#define MAINSTONE_ETHERNET_IRQ MAINSTONE_IRQ(3)
#define MAINSTONE_AC97_IRQ MAINSTONE_IRQ(4)
#define MAINSTONE_PEN_IRQ MAINSTONE_IRQ(5)
#define MAINSTONE_MSINS_IRQ MAINSTONE_IRQ(6)
#define MAINSTONE_EXBRD_IRQ MAINSTONE_IRQ(7)
#define MAINSTONE_S0_CD_IRQ MAINSTONE_IRQ(9)
#define MAINSTONE_S0_STSCHG_IRQ MAINSTONE_IRQ(10)
#define MAINSTONE_S0_IRQ MAINSTONE_IRQ(11)
#define MAINSTONE_S1_CD_IRQ MAINSTONE_IRQ(13)
#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
#endif
......@@ -23,6 +23,13 @@
* Definitions of CPU card resources only
*/
/* phyCORE-PXA270 (PCM027) Interrupts */
#define PCM027_IRQ(x) (IRQ_BOARD_START + (x))
#define PCM027_BTDET_IRQ PCM027_IRQ(0)
#define PCM027_FF_RI_IRQ PCM027_IRQ(1)
#define PCM027_MMCDET_IRQ PCM027_IRQ(2)
#define PCM027_PM_5V_IRQ PCM027_IRQ(3)
/* I2C RTC */
#define PCM027_RTC_IRQ_GPIO 0
#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
......
......@@ -65,6 +65,10 @@
#include <mach/pxa25x-udc.h>
#endif
#ifdef CONFIG_ARCH_LUBBOCK
#include <mach/lubbock.h>
#endif
#include <asm/mach/udc_pxa2xx.h>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment