Commit 0df4cf33 authored by Chen-Yu Tsai's avatar Chen-Yu Tsai

ARM: dts: sun4i: Add device nodes for display pipelines

The A10 has two interconnected display pipelines, much like the A31,
but without the DRCs between the backend and TCONs.

Add all the device nodes for them, including the downstream HDMI
controller that we already support.
Signed-off-by: default avatarChen-Yu Tsai <wens@csie.org>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent cfe8be23
......@@ -180,6 +180,12 @@ osc32k: clk-32k {
};
};
de: display-engine {
compatible = "allwinner,sun4i-a10-display-engine";
allwinner,pipelines = <&fe0>, <&fe1>;
status = "disabled";
};
soc {
compatible = "simple-bus";
#address-cells = <1>;
......@@ -292,6 +298,104 @@ mdio: mdio@1c0b080 {
#size-cells = <0>;
};
tcon0: lcd-controller@1c0c000 {
compatible = "allwinner,sun4i-a10-tcon";
reg = <0x01c0c000 0x1000>;
interrupts = <44>;
resets = <&ccu RST_TCON0>;
reset-names = "lcd";
clocks = <&ccu CLK_AHB_LCD0>,
<&ccu CLK_TCON0_CH0>,
<&ccu CLK_TCON0_CH1>;
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon0-pixel-clock";
dmas = <&dma SUN4I_DMA_DEDICATED 14>;
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon0_in_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_out_tcon0>;
};
tcon0_in_be1: endpoint@1 {
reg = <1>;
remote-endpoint = <&be1_out_tcon0>;
};
};
tcon0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon0_out_hdmi: endpoint@1 {
reg = <1>;
remote-endpoint = <&hdmi_in_tcon0>;
allwinner,tcon-channel = <1>;
};
};
};
};
tcon1: lcd-controller@1c0d000 {
compatible = "allwinner,sun4i-a10-tcon";
reg = <0x01c0d000 0x1000>;
interrupts = <45>;
resets = <&ccu RST_TCON1>;
reset-names = "lcd";
clocks = <&ccu CLK_AHB_LCD1>,
<&ccu CLK_TCON1_CH0>,
<&ccu CLK_TCON1_CH1>;
clock-names = "ahb",
"tcon-ch0",
"tcon-ch1";
clock-output-names = "tcon1-pixel-clock";
dmas = <&dma SUN4I_DMA_DEDICATED 15>;
ports {
#address-cells = <1>;
#size-cells = <0>;
tcon1_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
tcon1_in_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_out_tcon1>;
};
tcon1_in_be1: endpoint@1 {
reg = <1>;
remote-endpoint = <&be1_out_tcon1>;
};
};
tcon1_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
tcon1_out_hdmi: endpoint@1 {
reg = <1>;
remote-endpoint = <&hdmi_in_tcon1>;
allwinner,tcon-channel = <1>;
};
};
};
};
mmc0: mmc@1c0f000 {
compatible = "allwinner,sun4i-a10-mmc";
reg = <0x01c0f000 0x1000>;
......@@ -393,6 +497,48 @@ crypto: crypto-engine@1c15000 {
clock-names = "ahb", "mod";
};
hdmi: hdmi@1c16000 {
compatible = "allwinner,sun4i-a10-hdmi";
reg = <0x01c16000 0x1000>;
interrupts = <58>;
clocks = <&ccu CLK_AHB_HDMI0>, <&ccu CLK_HDMI>,
<&ccu 9>,
<&ccu 18>;
clock-names = "ahb", "mod", "pll-0", "pll-1";
dmas = <&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_NORMAL 16>,
<&dma SUN4I_DMA_DEDICATED 24>;
dma-names = "ddc-tx", "ddc-rx", "audio-tx";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
hdmi_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
hdmi_in_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_out_hdmi>;
};
hdmi_in_tcon1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_out_hdmi>;
};
};
hdmi_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
};
};
};
spi2: spi@1c17000 {
compatible = "allwinner,sun4i-a10-spi";
reg = <0x01c17000 0x1000>;
......@@ -856,5 +1002,165 @@ can0: can@1c2bc00 {
clocks = <&ccu CLK_APB1_CAN>;
status = "disabled";
};
fe0: display-frontend@1e00000 {
compatible = "allwinner,sun4i-a10-display-frontend";
reg = <0x01e00000 0x20000>;
interrupts = <47>;
clocks = <&ccu CLK_AHB_DE_FE0>, <&ccu CLK_DE_FE0>,
<&ccu CLK_DRAM_DE_FE0>;
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_DE_FE0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
fe0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
fe0_out_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_in_fe0>;
};
fe0_out_be1: endpoint@1 {
reg = <1>;
remote-endpoint = <&be1_in_fe0>;
};
};
};
};
fe1: display-frontend@1e20000 {
compatible = "allwinner,sun4i-a10-display-frontend";
reg = <0x01e20000 0x20000>;
interrupts = <48>;
clocks = <&ccu CLK_AHB_DE_FE1>, <&ccu CLK_DE_FE1>,
<&ccu CLK_DRAM_DE_FE1>;
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_DE_FE1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
fe1_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
fe1_out_be0: endpoint@0 {
reg = <0>;
remote-endpoint = <&be0_in_fe1>;
};
fe1_out_be1: endpoint@1 {
reg = <1>;
remote-endpoint = <&be1_in_fe1>;
};
};
};
};
be1: display-backend@1e40000 {
compatible = "allwinner,sun4i-a10-display-backend";
reg = <0x01e40000 0x10000>;
interrupts = <48>;
clocks = <&ccu CLK_AHB_DE_BE1>, <&ccu CLK_DE_BE1>,
<&ccu CLK_DRAM_DE_BE1>;
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_DE_BE1>;
ports {
#address-cells = <1>;
#size-cells = <0>;
be1_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
be1_in_fe0: endpoint@0 {
reg = <0>;
remote-endpoint = <&fe0_out_be1>;
};
be1_in_fe1: endpoint@1 {
reg = <1>;
remote-endpoint = <&fe1_out_be1>;
};
};
be1_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
be1_out_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon1_in_be0>;
};
be1_out_tcon1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_in_be1>;
};
};
};
};
be0: display-backend@1e60000 {
compatible = "allwinner,sun4i-a10-display-backend";
reg = <0x01e60000 0x10000>;
interrupts = <47>;
clocks = <&ccu CLK_AHB_DE_BE0>, <&ccu CLK_DE_BE0>,
<&ccu CLK_DRAM_DE_BE0>;
clock-names = "ahb", "mod",
"ram";
resets = <&ccu RST_DE_BE0>;
ports {
#address-cells = <1>;
#size-cells = <0>;
be0_in: port@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
be0_in_fe0: endpoint@0 {
reg = <0>;
remote-endpoint = <&fe0_out_be0>;
};
be0_in_fe1: endpoint@1 {
reg = <1>;
remote-endpoint = <&fe1_out_be0>;
};
};
be0_out: port@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
be0_out_tcon0: endpoint@0 {
reg = <0>;
remote-endpoint = <&tcon0_in_be0>;
};
be0_out_tcon1: endpoint@1 {
reg = <1>;
remote-endpoint = <&tcon1_in_be0>;
};
};
};
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment