Merge branches 'doc.2019.12.10a', 'exp.2019.12.09a', 'fixes.2020.01.24a',...

Merge branches 'doc.2019.12.10a', 'exp.2019.12.09a', 'fixes.2020.01.24a', 'kfree_rcu.2020.01.24a', 'list.2020.01.10a', 'preempt.2020.01.24a' and 'torture.2019.12.09a' into HEAD

doc.2019.12.10a: Documentations updates
exp.2019.12.09a: Expedited grace-period updates
fixes.2020.01.24a: Miscellaneous fixes
kfree_rcu.2020.01.24a: Batch kfree_rcu() work
list.2020.01.10a: RCU-protected-list updates
preempt.2020.01.24a: Preemptible RCU updates
torture.2019.12.09a: Torture-test updates

.mailmap

@@ -207,6 +207,10 @@ Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
 Patrick Mochel <mochel@digitalimplant.org>
 Paul Burton <paulburton@kernel.org> <paul.burton@imgtec.com>
 Paul Burton <paulburton@kernel.org> <paul.burton@mips.com>
+Paul E. McKenney <paulmck@kernel.org> <paulmck@linux.ibm.com>
+Paul E. McKenney <paulmck@kernel.org> <paulmck@linux.vnet.ibm.com>
+Paul E. McKenney <paulmck@kernel.org> <paul.mckenney@linaro.org>
+Paul E. McKenney <paulmck@kernel.org> <paulmck@us.ibm.com>
 Peter A Jonsson <pj@ludd.ltu.se>
 Peter Oruba <peter@oruba.de>
 Peter Oruba <peter.oruba@amd.com>

Documentation/RCU/stallwarn.txt

@@ -225,18 +225,13 @@ an estimate of the total number of RCU callbacks queued across all CPUs
 In kernels with CONFIG_RCU_FAST_NO_HZ, more information is printed
 for each CPU:
 
-	0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 Nonlazy posted: ..D
+	0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 softirq=82/543 last_accelerate: a345/d342 dyntick_enabled: 1
 
 The "last_accelerate:" prints the low-order 16 bits (in hex) of the
 jiffies counter when this CPU last invoked rcu_try_advance_all_cbs()
 from rcu_needs_cpu() or last invoked rcu_accelerate_cbs() from
-rcu_prepare_for_idle().  The "Nonlazy posted:" indicates lazy-callback
-status, so that an "l" indicates that all callbacks were lazy at the start
-of the last idle period and an "L" indicates that there are currently
-no non-lazy callbacks (in both cases, "." is printed otherwise, as
-shown above) and "D" indicates that dyntick-idle processing is enabled
-("." is printed otherwise, for example, if disabled via the "nohz="
-kernel boot parameter).
+rcu_prepare_for_idle(). "dyntick_enabled: 1" indicates that dyntick-idle
+processing is enabled.
 
 If the grace period ends just as the stall warning starts printing,
 there will be a spurious stall-warning message, which will include

Documentation/admin-guide/kernel-parameters.txt

@@ -3978,6 +3978,19 @@
 			test until boot completes in order to avoid
 			interference.
 
+	rcuperf.kfree_rcu_test= [KNL]
+			Set to measure performance of kfree_rcu() flooding.
+
+	rcuperf.kfree_nthreads= [KNL]
+			The number of threads running loops of kfree_rcu().
+
+	rcuperf.kfree_alloc_num= [KNL]
+			Number of allocations and frees done in an iteration.
+
+	rcuperf.kfree_loops= [KNL]
+			Number of loops doing rcuperf.kfree_alloc_num number
+			of allocations and frees.
+
 	rcuperf.nreaders= [KNL]
 			Set number of RCU readers.  The value -1 selects
 			N, where N is the number of CPUs.  A value

arch/powerpc/include/asm/barrier.h

@@ -18,8 +18,6 @@
  * mb() prevents loads and stores being reordered across this point.
  * rmb() prevents loads being reordered across this point.
  * wmb() prevents stores being reordered across this point.
- * read_barrier_depends() prevents data-dependent loads being reordered
- *	across this point (nop on PPC).
  *
  * *mb() variants without smp_ prefix must order all types of memory
  * operations with one another. sync is the only instruction sufficient

drivers/net/wireless/mediatek/mt76/agg-rx.c

@@ -281,8 +281,8 @@ void mt76_rx_aggr_stop(struct mt76_dev *dev, struct mt76_wcid *wcid, u8 tidno)
 {
 	struct mt76_rx_tid *tid = NULL;
 
-	rcu_swap_protected(wcid->aggr[tidno], tid,
-			   lockdep_is_held(&dev->mutex));
+	tid = rcu_replace_pointer(wcid->aggr[tidno], tid,
+				  lockdep_is_held(&dev->mutex));
 	if (tid) {
 		mt76_rx_aggr_shutdown(dev, tid);
 		kfree_rcu(tid, rcu_head);

include/linux/list.h

@@ -23,6 +23,13 @@
 #define LIST_HEAD(name) \
 	struct list_head name = LIST_HEAD_INIT(name)
 
+/**
+ * INIT_LIST_HEAD - Initialize a list_head structure
+ * @list: list_head structure to be initialized.
+ *
+ * Initializes the list_head to point to itself.  If it is a list header,
+ * the result is an empty list.
+ */
 static inline void INIT_LIST_HEAD(struct list_head *list)
 {
 	WRITE_ONCE(list->next, list);
@@ -120,12 +127,6 @@ static inline void __list_del_clearprev(struct list_head *entry)
 	entry->prev = NULL;
 }
 
-/**
- * list_del - deletes entry from list.
- * @entry: the element to delete from the list.
- * Note: list_empty() on entry does not return true after this, the entry is
- * in an undefined state.
- */
 static inline void __list_del_entry(struct list_head *entry)
 {
 	if (!__list_del_entry_valid(entry))
@@ -134,6 +135,12 @@ static inline void __list_del_entry(struct list_head *entry)
 	__list_del(entry->prev, entry->next);
 }
 
+/**
+ * list_del - deletes entry from list.
+ * @entry: the element to delete from the list.
+ * Note: list_empty() on entry does not return true after this, the entry is
+ * in an undefined state.
+ */
 static inline void list_del(struct list_head *entry)
 {
 	__list_del_entry(entry);
@@ -157,8 +164,15 @@ static inline void list_replace(struct list_head *old,
 	new->prev->next = new;
 }
 
+/**
+ * list_replace_init - replace old entry by new one and initialize the old one
+ * @old : the element to be replaced
+ * @new : the new element to insert
+ *
+ * If @old was empty, it will be overwritten.
+ */
 static inline void list_replace_init(struct list_head *old,
-					struct list_head *new)
+				     struct list_head *new)
 {
 	list_replace(old, new);
 	INIT_LIST_HEAD(old);
@@ -744,11 +758,36 @@ static inline void INIT_HLIST_NODE(struct hlist_node *h)
 	h->pprev = NULL;
 }
 
+/**
+ * hlist_unhashed - Has node been removed from list and reinitialized?
+ * @h: Node to be checked
+ *
+ * Not that not all removal functions will leave a node in unhashed
+ * state.  For example, hlist_nulls_del_init_rcu() does leave the
+ * node in unhashed state, but hlist_nulls_del() does not.
+ */
 static inline int hlist_unhashed(const struct hlist_node *h)
 {
 	return !h->pprev;
 }
 
+/**
+ * hlist_unhashed_lockless - Version of hlist_unhashed for lockless use
+ * @h: Node to be checked
+ *
+ * This variant of hlist_unhashed() must be used in lockless contexts
+ * to avoid potential load-tearing.  The READ_ONCE() is paired with the
+ * various WRITE_ONCE() in hlist helpers that are defined below.
+ */
+static inline int hlist_unhashed_lockless(const struct hlist_node *h)
+{
+	return !READ_ONCE(h->pprev);
+}
+
+/**
+ * hlist_empty - Is the specified hlist_head structure an empty hlist?
+ * @h: Structure to check.
+ */
 static inline int hlist_empty(const struct hlist_head *h)
 {
 	return !READ_ONCE(h->first);
@@ -761,9 +800,16 @@ static inline void __hlist_del(struct hlist_node *n)
 
 	WRITE_ONCE(*pprev, next);
 	if (next)
-		next->pprev = pprev;
+		WRITE_ONCE(next->pprev, pprev);
 }
 
+/**
+ * hlist_del - Delete the specified hlist_node from its list
+ * @n: Node to delete.
+ *
+ * Note that this function leaves the node in hashed state.  Use
+ * hlist_del_init() or similar instead to unhash @n.
+ */
 static inline void hlist_del(struct hlist_node *n)
 {
 	__hlist_del(n);
@@ -771,6 +817,12 @@ static inline void hlist_del(struct hlist_node *n)
 	n->pprev = LIST_POISON2;
 }
 
+/**
+ * hlist_del_init - Delete the specified hlist_node from its list and initialize
+ * @n: Node to delete.
+ *
+ * Note that this function leaves the node in unhashed state.
+ */
 static inline void hlist_del_init(struct hlist_node *n)
 {
 	if (!hlist_unhashed(n)) {
@@ -779,51 +831,83 @@ static inline void hlist_del_init(struct hlist_node *n)
 	}
 }
 
+/**
+ * hlist_add_head - add a new entry at the beginning of the hlist
+ * @n: new entry to be added
+ * @h: hlist head to add it after
+ *
+ * Insert a new entry after the specified head.
+ * This is good for implementing stacks.
+ */
 static inline void hlist_add_head(struct hlist_node *n, struct hlist_head *h)
 {
 	struct hlist_node *first = h->first;
-	n->next = first;
+	WRITE_ONCE(n->next, first);
 	if (first)
-		first->pprev = &n->next;
+		WRITE_ONCE(first->pprev, &n->next);
 	WRITE_ONCE(h->first, n);
-	n->pprev = &h->first;
+	WRITE_ONCE(n->pprev, &h->first);
 }
 
-/* next must be != NULL */
+/**
+ * hlist_add_before - add a new entry before the one specified
+ * @n: new entry to be added
+ * @next: hlist node to add it before, which must be non-NULL
+ */
 static inline void hlist_add_before(struct hlist_node *n,
-					struct hlist_node *next)
+				    struct hlist_node *next)
 {
-	n->pprev = next->pprev;
-	n->next = next;
-	next->pprev = &n->next;
+	WRITE_ONCE(n->pprev, next->pprev);
+	WRITE_ONCE(n->next, next);
+	WRITE_ONCE(next->pprev, &n->next);
 	WRITE_ONCE(*(n->pprev), n);
 }
 
+/**
+ * hlist_add_behing - add a new entry after the one specified
+ * @n: new entry to be added
+ * @prev: hlist node to add it after, which must be non-NULL
+ */
 static inline void hlist_add_behind(struct hlist_node *n,
 				    struct hlist_node *prev)
 {
-	n->next = prev->next;
-	prev->next = n;
-	n->pprev = &prev->next;
+	WRITE_ONCE(n->next, prev->next);
+	WRITE_ONCE(prev->next, n);
+	WRITE_ONCE(n->pprev, &prev->next);
 
 	if (n->next)
-		n->next->pprev  = &n->next;
+		WRITE_ONCE(n->next->pprev, &n->next);
 }
 
-/* after that we'll appear to be on some hlist and hlist_del will work */
+/**
+ * hlist_add_fake - create a fake hlist consisting of a single headless node
+ * @n: Node to make a fake list out of
+ *
+ * This makes @n appear to be its own predecessor on a headless hlist.
+ * The point of this is to allow things like hlist_del() to work correctly
+ * in cases where there is no list.
+ */
 static inline void hlist_add_fake(struct hlist_node *n)
 {
 	n->pprev = &n->next;
 }
 
+/**
+ * hlist_fake: Is this node a fake hlist?
+ * @h: Node to check for being a self-referential fake hlist.
+ */
 static inline bool hlist_fake(struct hlist_node *h)
 {
 	return h->pprev == &h->next;
 }
 
-/*
+/**
+ * hlist_is_singular_node - is node the only element of the specified hlist?
+ * @n: Node to check for singularity.
+ * @h: Header for potentially singular list.
+ *
  * Check whether the node is the only node of the head without
- * accessing head:
+ * accessing head, thus avoiding unnecessary cache misses.
  */
 static inline bool
 hlist_is_singular_node(struct hlist_node *n, struct hlist_head *h)
@@ -831,7 +915,11 @@ hlist_is_singular_node(struct hlist_node *n, struct hlist_head *h)
 	return !n->next && n->pprev == &h->first;
 }
 
-/*
+/**
+ * hlist_move_list - Move an hlist
+ * @old: hlist_head for old list.
+ * @new: hlist_head for new list.
+ *
  * Move a list from one list head to another. Fixup the pprev
  * reference of the first entry if it exists.
  */

include/linux/list_nulls.h

@@ -56,11 +56,33 @@ static inline unsigned long get_nulls_value(const struct hlist_nulls_node *ptr)
 	return ((unsigned long)ptr) >> 1;
 }
 
+/**
+ * hlist_nulls_unhashed - Has node been removed and reinitialized?
+ * @h: Node to be checked
+ *
+ * Not that not all removal functions will leave a node in unhashed state.
+ * For example, hlist_del_init_rcu() leaves the node in unhashed state,
+ * but hlist_nulls_del() does not.
+ */
 static inline int hlist_nulls_unhashed(const struct hlist_nulls_node *h)
 {
 	return !h->pprev;
 }
 
+/**
+ * hlist_nulls_unhashed_lockless - Has node been removed and reinitialized?
+ * @h: Node to be checked
+ *
+ * Not that not all removal functions will leave a node in unhashed state.
+ * For example, hlist_del_init_rcu() leaves the node in unhashed state,
+ * but hlist_nulls_del() does not.  Unlike hlist_nulls_unhashed(), this
+ * function may be used locklessly.
+ */
+static inline int hlist_nulls_unhashed_lockless(const struct hlist_nulls_node *h)
+{
+	return !READ_ONCE(h->pprev);
+}
+
 static inline int hlist_nulls_empty(const struct hlist_nulls_head *h)
 {
 	return is_a_nulls(READ_ONCE(h->first));
@@ -72,10 +94,10 @@ static inline void hlist_nulls_add_head(struct hlist_nulls_node *n,
 	struct hlist_nulls_node *first = h->first;
 
 	n->next = first;
-	n->pprev = &h->first;
+	WRITE_ONCE(n->pprev, &h->first);
 	h->first = n;
 	if (!is_a_nulls(first))
-		first->pprev = &n->next;
+		WRITE_ONCE(first->pprev, &n->next);
 }
 
 static inline void __hlist_nulls_del(struct hlist_nulls_node *n)
@@ -85,13 +107,13 @@ static inline void __hlist_nulls_del(struct hlist_nulls_node *n)
 
 	WRITE_ONCE(*pprev, next);
 	if (!is_a_nulls(next))
-		next->pprev = pprev;
+		WRITE_ONCE(next->pprev, pprev);
 }
 
 static inline void hlist_nulls_del(struct hlist_nulls_node *n)
 {
 	__hlist_nulls_del(n);
-	n->pprev = LIST_POISON2;
+	WRITE_ONCE(n->pprev, LIST_POISON2);
 }
 
 /**

include/linux/rcu_segcblist.h

@@ -22,7 +22,6 @@ struct rcu_cblist {
 	struct rcu_head *head;
 	struct rcu_head **tail;
 	long len;
-	long len_lazy;
 };
 
 #define RCU_CBLIST_INITIALIZER(n) { .head = NULL, .tail = &n.head }
@@ -73,7 +72,6 @@ struct rcu_segcblist {
 #else
 	long len;
 #endif
-	long len_lazy;
 	u8 enabled;
 	u8 offloaded;
 };

include/linux/rculist.h

@@ -40,6 +40,16 @@ static inline void INIT_LIST_HEAD_RCU(struct list_head *list)
  */
 #define list_next_rcu(list)	(*((struct list_head __rcu **)(&(list)->next)))
 
+/**
+ * list_tail_rcu - returns the prev pointer of the head of the list
+ * @head: the head of the list
+ *
+ * Note: This should only be used with the list header, and even then
+ * only if list_del() and similar primitives are not also used on the
+ * list header.
+ */
+#define list_tail_rcu(head)	(*((struct list_head __rcu **)(&(head)->prev)))
+
 /*
  * Check during list traversal that we are within an RCU reader
  */
@@ -173,7 +183,7 @@ static inline void hlist_del_init_rcu(struct hlist_node *n)
 {
 	if (!hlist_unhashed(n)) {
 		__hlist_del(n);
-		n->pprev = NULL;
+		WRITE_ONCE(n->pprev, NULL);
 	}
 }
 
@@ -361,7 +371,7 @@ static inline void list_splice_tail_init_rcu(struct list_head *list,
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the list_head within the struct.
- * @cond:	optional lockdep expression if called from non-RCU protection.
+ * @cond...:	optional lockdep expression if called from non-RCU protection.
  *
  * This list-traversal primitive may safely run concurrently with
  * the _rcu list-mutation primitives such as list_add_rcu()
@@ -473,7 +483,7 @@ static inline void list_splice_tail_init_rcu(struct list_head *list,
 static inline void hlist_del_rcu(struct hlist_node *n)
 {
 	__hlist_del(n);
-	n->pprev = LIST_POISON2;
+	WRITE_ONCE(n->pprev, LIST_POISON2);
 }
 
 /**
@@ -489,11 +499,11 @@ static inline void hlist_replace_rcu(struct hlist_node *old,
 	struct hlist_node *next = old->next;
 
 	new->next = next;
-	new->pprev = old->pprev;
+	WRITE_ONCE(new->pprev, old->pprev);
 	rcu_assign_pointer(*(struct hlist_node __rcu **)new->pprev, new);
 	if (next)
-		new->next->pprev = &new->next;
-	old->pprev = LIST_POISON2;
+		WRITE_ONCE(new->next->pprev, &new->next);
+	WRITE_ONCE(old->pprev, LIST_POISON2);
 }
 
 /*
@@ -528,10 +538,10 @@ static inline void hlist_add_head_rcu(struct hlist_node *n,
 	struct hlist_node *first = h->first;
 
 	n->next = first;
-	n->pprev = &h->first;
+	WRITE_ONCE(n->pprev, &h->first);
 	rcu_assign_pointer(hlist_first_rcu(h), n);
 	if (first)
-		first->pprev = &n->next;
+		WRITE_ONCE(first->pprev, &n->next);
 }
 
 /**
@@ -564,7 +574,7 @@ static inline void hlist_add_tail_rcu(struct hlist_node *n,
 
 	if (last) {
 		n->next = last->next;
-		n->pprev = &last->next;
+		WRITE_ONCE(n->pprev, &last->next);
 		rcu_assign_pointer(hlist_next_rcu(last), n);
 	} else {
 		hlist_add_head_rcu(n, h);
@@ -592,10 +602,10 @@ static inline void hlist_add_tail_rcu(struct hlist_node *n,
 static inline void hlist_add_before_rcu(struct hlist_node *n,
 					struct hlist_node *next)
 {
-	n->pprev = next->pprev;
+	WRITE_ONCE(n->pprev, next->pprev);
 	n->next = next;
 	rcu_assign_pointer(hlist_pprev_rcu(n), n);
-	next->pprev = &n->next;
+	WRITE_ONCE(next->pprev, &n->next);
 }
 
 /**
@@ -620,10 +630,10 @@ static inline void hlist_add_behind_rcu(struct hlist_node *n,
 					struct hlist_node *prev)
 {
 	n->next = prev->next;
-	n->pprev = &prev->next;
+	WRITE_ONCE(n->pprev, &prev->next);
 	rcu_assign_pointer(hlist_next_rcu(prev), n);
 	if (n->next)
-		n->next->pprev = &n->next;
+		WRITE_ONCE(n->next->pprev, &n->next);
 }
 
 #define __hlist_for_each_rcu(pos, head)				\
@@ -636,7 +646,7 @@ static inline void hlist_add_behind_rcu(struct hlist_node *n,
  * @pos:	the type * to use as a loop cursor.
  * @head:	the head for your list.
  * @member:	the name of the hlist_node within the struct.
- * @cond:	optional lockdep expression if called from non-RCU protection.
+ * @cond...:	optional lockdep expression if called from non-RCU protection.
  *
  * This list-traversal primitive may safely run concurrently with
  * the _rcu list-mutation primitives such as hlist_add_head_rcu()

include/linux/rculist_nulls.h

@@ -34,13 +34,21 @@ static inline void hlist_nulls_del_init_rcu(struct hlist_nulls_node *n)
 {
 	if (!hlist_nulls_unhashed(n)) {
 		__hlist_nulls_del(n);
-		n->pprev = NULL;
+		WRITE_ONCE(n->pprev, NULL);
 	}
 }
 
+/**
+ * hlist_nulls_first_rcu - returns the first element of the hash list.
+ * @head: the head of the list.
+ */
 #define hlist_nulls_first_rcu(head) \
 	(*((struct hlist_nulls_node __rcu __force **)&(head)->first))
 
+/**
+ * hlist_nulls_next_rcu - returns the element of the list after @node.
+ * @node: element of the list.
+ */
 #define hlist_nulls_next_rcu(node) \
 	(*((struct hlist_nulls_node __rcu __force **)&(node)->next))
 
@@ -66,7 +74,7 @@ static inline void hlist_nulls_del_init_rcu(struct hlist_nulls_node *n)
 static inline void hlist_nulls_del_rcu(struct hlist_nulls_node *n)
 {
 	__hlist_nulls_del(n);
-	n->pprev = LIST_POISON2;
+	WRITE_ONCE(n->pprev, LIST_POISON2);
 }
 
 /**
@@ -94,17 +102,17 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n,
 	struct hlist_nulls_node *first = h->first;
 
 	n->next = first;
-	n->pprev = &h->first;
+	WRITE_ONCE(n->pprev, &h->first);
 	rcu_assign_pointer(hlist_nulls_first_rcu(h), n);
 	if (!is_a_nulls(first))
-		first->pprev = &n->next;
+		WRITE_ONCE(first->pprev, &n->next);
 }
 
 /**
  * hlist_nulls_for_each_entry_rcu - iterate over rcu list of given type
  * @tpos:	the type * to use as a loop cursor.
  * @pos:	the &struct hlist_nulls_node to use as a loop cursor.
- * @head:	the head for your list.
+ * @head:	the head of the list.
  * @member:	the name of the hlist_nulls_node within the struct.
  *
  * The barrier() is needed to make sure compiler doesn't cache first element [1],
@@ -124,7 +132,7 @@ static inline void hlist_nulls_add_head_rcu(struct hlist_nulls_node *n,
  *   iterate over list of given type safe against removal of list entry
  * @tpos:	the type * to use as a loop cursor.
  * @pos:	the &struct hlist_nulls_node to use as a loop cursor.
- * @head:	the head for your list.
+ * @head:	the head of the list.
  * @member:	the name of the hlist_nulls_node within the struct.
  */
 #define hlist_nulls_for_each_entry_safe(tpos, pos, head, member)		\

include/linux/rcupdate.h

@@ -154,7 +154,7 @@ static inline void exit_tasks_rcu_finish(void) { }
  *
  * This macro resembles cond_resched(), except that it is defined to
  * report potential quiescent states to RCU-tasks even if the cond_resched()
- * machinery were to be shut off, as some advocate for PREEMPT kernels.
+ * machinery were to be shut off, as some advocate for PREEMPTION kernels.
  */
 #define cond_resched_tasks_rcu_qs() \
 do { \
@@ -167,7 +167,7 @@ do { \
  * TREE_RCU and rcu_barrier_() primitives in TINY_RCU.
  */
 
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU)
+#if defined(CONFIG_TREE_RCU)
 #include <linux/rcutree.h>
 #elif defined(CONFIG_TINY_RCU)
 #include <linux/rcutiny.h>
@@ -400,22 +400,6 @@ do {									      \
 	__tmp;								\
 })
 
-/**
- * rcu_swap_protected() - swap an RCU and a regular pointer
- * @rcu_ptr: RCU pointer
- * @ptr: regular pointer
- * @c: the conditions under which the dereference will take place
- *
- * Perform swap(@rcu_ptr, @ptr) where @rcu_ptr is an RCU-annotated pointer and
- * @c is the argument that is passed to the rcu_dereference_protected() call
- * used to read that pointer.
- */
-#define rcu_swap_protected(rcu_ptr, ptr, c) do {			\
-	typeof(ptr) __tmp = rcu_dereference_protected((rcu_ptr), (c));	\
-	rcu_assign_pointer((rcu_ptr), (ptr));				\
-	(ptr) = __tmp;							\
-} while (0)
-
 /**
  * rcu_access_pointer() - fetch RCU pointer with no dereferencing
  * @p: The pointer to read
@@ -598,10 +582,10 @@ do {									      \
  *
  * You can avoid reading and understanding the next paragraph by
  * following this rule: don't put anything in an rcu_read_lock() RCU
- * read-side critical section that would block in a !PREEMPT kernel.
+ * read-side critical section that would block in a !PREEMPTION kernel.
  * But if you want the full story, read on!
  *
- * In non-preemptible RCU implementations (TREE_RCU and TINY_RCU),
+ * In non-preemptible RCU implementations (pure TREE_RCU and TINY_RCU),
  * it is illegal to block while in an RCU read-side critical section.
  * In preemptible RCU implementations (PREEMPT_RCU) in CONFIG_PREEMPTION
  * kernel builds, RCU read-side critical sections may be preempted,
@@ -912,4 +896,8 @@ rcu_head_after_call_rcu(struct rcu_head *rhp, rcu_callback_t f)
 	return false;
 }
 
+/* kernel/ksysfs.c definitions */
+extern int rcu_expedited;
+extern int rcu_normal;
+
 #endif /* __LINUX_RCUPDATE_H */

include/linux/rcutiny.h

@@ -85,6 +85,7 @@ static inline void rcu_scheduler_starting(void) { }
 static inline void rcu_end_inkernel_boot(void) { }
 static inline bool rcu_is_watching(void) { return true; }
 static inline void rcu_momentary_dyntick_idle(void) { }
+static inline void kfree_rcu_scheduler_running(void) { }
 
 /* Avoid RCU read-side critical sections leaking across. */
 static inline void rcu_all_qs(void) { barrier(); }

include/linux/rcutree.h

@@ -38,6 +38,7 @@ void kfree_call_rcu(struct rcu_head *head, rcu_callback_t func);
 void rcu_barrier(void);
 bool rcu_eqs_special_set(int cpu);
 void rcu_momentary_dyntick_idle(void);
+void kfree_rcu_scheduler_running(void);
 unsigned long get_state_synchronize_rcu(void);
 void cond_synchronize_rcu(unsigned long oldstate);
 

include/linux/tick.h

@@ -109,8 +109,10 @@ enum tick_dep_bits {
 	TICK_DEP_BIT_PERF_EVENTS	= 1,
 	TICK_DEP_BIT_SCHED		= 2,
 	TICK_DEP_BIT_CLOCK_UNSTABLE	= 3,
-	TICK_DEP_BIT_RCU		= 4
+	TICK_DEP_BIT_RCU		= 4,
+	TICK_DEP_BIT_RCU_EXP		= 5
 };
+#define TICK_DEP_BIT_MAX TICK_DEP_BIT_RCU_EXP
 
 #define TICK_DEP_MASK_NONE		0
 #define TICK_DEP_MASK_POSIX_TIMER	(1 << TICK_DEP_BIT_POSIX_TIMER)
@@ -118,6 +120,7 @@ enum tick_dep_bits {
 #define TICK_DEP_MASK_SCHED		(1 << TICK_DEP_BIT_SCHED)
 #define TICK_DEP_MASK_CLOCK_UNSTABLE	(1 << TICK_DEP_BIT_CLOCK_UNSTABLE)
 #define TICK_DEP_MASK_RCU		(1 << TICK_DEP_BIT_RCU)
+#define TICK_DEP_MASK_RCU_EXP		(1 << TICK_DEP_BIT_RCU_EXP)
 
 #ifdef CONFIG_NO_HZ_COMMON
 extern bool tick_nohz_enabled;

include/trace/events/rcu.h

@@ -41,7 +41,7 @@ TRACE_EVENT(rcu_utilization,
 	TP_printk("%s", __entry->s)
 );
 
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU)
+#if defined(CONFIG_TREE_RCU)
 
 /*
  * Tracepoint for grace-period events.  Takes a string identifying the
@@ -432,7 +432,7 @@ TRACE_EVENT_RCU(rcu_fqs,
 		  __entry->cpu, __entry->qsevent)
 );
 
-#endif /* #if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU) */
+#endif /* #if defined(CONFIG_TREE_RCU) */
 
 /*
  * Tracepoint for dyntick-idle entry/exit events.  These take a string
@@ -449,7 +449,7 @@ TRACE_EVENT_RCU(rcu_fqs,
  */
 TRACE_EVENT_RCU(rcu_dyntick,
 
-	TP_PROTO(const char *polarity, long oldnesting, long newnesting, atomic_t dynticks),
+	TP_PROTO(const char *polarity, long oldnesting, long newnesting, int dynticks),
 
 	TP_ARGS(polarity, oldnesting, newnesting, dynticks),
 
@@ -464,7 +464,7 @@ TRACE_EVENT_RCU(rcu_dyntick,
 		__entry->polarity = polarity;
 		__entry->oldnesting = oldnesting;
 		__entry->newnesting = newnesting;
-		__entry->dynticks = atomic_read(&dynticks);
+		__entry->dynticks = dynticks;
 	),
 
 	TP_printk("%s %lx %lx %#3x", __entry->polarity,
@@ -481,16 +481,14 @@ TRACE_EVENT_RCU(rcu_dyntick,
  */
 TRACE_EVENT_RCU(rcu_callback,
 
-	TP_PROTO(const char *rcuname, struct rcu_head *rhp, long qlen_lazy,
-		 long qlen),
+	TP_PROTO(const char *rcuname, struct rcu_head *rhp, long qlen),
 
-	TP_ARGS(rcuname, rhp, qlen_lazy, qlen),
+	TP_ARGS(rcuname, rhp, qlen),
 
 	TP_STRUCT__entry(
 		__field(const char *, rcuname)
 		__field(void *, rhp)
 		__field(void *, func)
-		__field(long, qlen_lazy)
 		__field(long, qlen)
 	),
 
@@ -498,13 +496,12 @@ TRACE_EVENT_RCU(rcu_callback,
 		__entry->rcuname = rcuname;
 		__entry->rhp = rhp;
 		__entry->func = rhp->func;
-		__entry->qlen_lazy = qlen_lazy;
 		__entry->qlen = qlen;
 	),
 
-	TP_printk("%s rhp=%p func=%ps %ld/%ld",
+	TP_printk("%s rhp=%p func=%ps %ld",
 		  __entry->rcuname, __entry->rhp, __entry->func,
-		  __entry->qlen_lazy, __entry->qlen)
+		  __entry->qlen)
 );
 
 /*
@@ -518,15 +515,14 @@ TRACE_EVENT_RCU(rcu_callback,
 TRACE_EVENT_RCU(rcu_kfree_callback,
 
 	TP_PROTO(const char *rcuname, struct rcu_head *rhp, unsigned long offset,
-		 long qlen_lazy, long qlen),
+		 long qlen),
 
-	TP_ARGS(rcuname, rhp, offset, qlen_lazy, qlen),
+	TP_ARGS(rcuname, rhp, offset, qlen),
 
 	TP_STRUCT__entry(
 		__field(const char *, rcuname)
 		__field(void *, rhp)
 		__field(unsigned long, offset)
-		__field(long, qlen_lazy)
 		__field(long, qlen)
 	),
 
@@ -534,13 +530,12 @@ TRACE_EVENT_RCU(rcu_kfree_callback,
 		__entry->rcuname = rcuname;
 		__entry->rhp = rhp;
 		__entry->offset = offset;
-		__entry->qlen_lazy = qlen_lazy;
 		__entry->qlen = qlen;
 	),
 
-	TP_printk("%s rhp=%p func=%ld %ld/%ld",
+	TP_printk("%s rhp=%p func=%ld %ld",
 		  __entry->rcuname, __entry->rhp, __entry->offset,
-		  __entry->qlen_lazy, __entry->qlen)
+		  __entry->qlen)
 );
 
 /*
@@ -552,27 +547,24 @@ TRACE_EVENT_RCU(rcu_kfree_callback,
  */
 TRACE_EVENT_RCU(rcu_batch_start,
 
-	TP_PROTO(const char *rcuname, long qlen_lazy, long qlen, long blimit),
+	TP_PROTO(const char *rcuname, long qlen, long blimit),
 
-	TP_ARGS(rcuname, qlen_lazy, qlen, blimit),
+	TP_ARGS(rcuname, qlen, blimit),
 
 	TP_STRUCT__entry(
 		__field(const char *, rcuname)
-		__field(long, qlen_lazy)
 		__field(long, qlen)
 		__field(long, blimit)
 	),
 
 	TP_fast_assign(
 		__entry->rcuname = rcuname;
-		__entry->qlen_lazy = qlen_lazy;
 		__entry->qlen = qlen;
 		__entry->blimit = blimit;
 	),
 
-	TP_printk("%s CBs=%ld/%ld bl=%ld",
-		  __entry->rcuname, __entry->qlen_lazy, __entry->qlen,
-		  __entry->blimit)
+	TP_printk("%s CBs=%ld bl=%ld",
+		  __entry->rcuname, __entry->qlen, __entry->blimit)
 );
 
 /*

kernel/rcu/Kconfig

@@ -7,7 +7,7 @@ menu "RCU Subsystem"
 
 config TREE_RCU
 	bool
-	default y if !PREEMPTION && SMP
+	default y if SMP
 	help
 	  This option selects the RCU implementation that is
 	  designed for very large SMP system with hundreds or
@@ -17,6 +17,7 @@ config TREE_RCU
 config PREEMPT_RCU
 	bool
 	default y if PREEMPTION
+	select TREE_RCU
 	help
 	  This option selects the RCU implementation that is
 	  designed for very large SMP systems with hundreds or
@@ -78,7 +79,7 @@ config TASKS_RCU
 	  user-mode execution as quiescent states.
 
 config RCU_STALL_COMMON
-	def_bool ( TREE_RCU || PREEMPT_RCU )
+	def_bool TREE_RCU
 	help
 	  This option enables RCU CPU stall code that is common between
 	  the TINY and TREE variants of RCU.  The purpose is to allow
@@ -86,13 +87,13 @@ config RCU_STALL_COMMON
 	  making these warnings mandatory for the tree variants.
 
 config RCU_NEED_SEGCBLIST
-	def_bool ( TREE_RCU || PREEMPT_RCU || TREE_SRCU )
+	def_bool ( TREE_RCU || TREE_SRCU )
 
 config RCU_FANOUT
 	int "Tree-based hierarchical RCU fanout value"
 	range 2 64 if 64BIT
 	range 2 32 if !64BIT
-	depends on (TREE_RCU || PREEMPT_RCU) && RCU_EXPERT
+	depends on TREE_RCU && RCU_EXPERT
 	default 64 if 64BIT
 	default 32 if !64BIT
 	help
@@ -112,7 +113,7 @@ config RCU_FANOUT_LEAF
 	int "Tree-based hierarchical RCU leaf-level fanout value"
 	range 2 64 if 64BIT
 	range 2 32 if !64BIT
-	depends on (TREE_RCU || PREEMPT_RCU) && RCU_EXPERT
+	depends on TREE_RCU && RCU_EXPERT
 	default 16
 	help
 	  This option controls the leaf-level fanout of hierarchical
@@ -187,7 +188,7 @@ config RCU_BOOST_DELAY
 
 config RCU_NOCB_CPU
 	bool "Offload RCU callback processing from boot-selected CPUs"
-	depends on TREE_RCU || PREEMPT_RCU
+	depends on TREE_RCU
 	depends on RCU_EXPERT || NO_HZ_FULL
 	default n
 	help
@@ -200,8 +201,8 @@ config RCU_NOCB_CPU
 	  specified at boot time by the rcu_nocbs parameter.  For each
 	  such CPU, a kthread ("rcuox/N") will be created to invoke
 	  callbacks, where the "N" is the CPU being offloaded, and where
-	  the "p" for RCU-preempt (PREEMPT kernels) and "s" for RCU-sched
-	  (!PREEMPT kernels).  Nothing prevents this kthread from running
+	  the "p" for RCU-preempt (PREEMPTION kernels) and "s" for RCU-sched
+	  (!PREEMPTION kernels).  Nothing prevents this kthread from running
 	  on the specified CPUs, but (1) the kthreads may be preempted
 	  between each callback, and (2) affinity or cgroups can be used
 	  to force the kthreads to run on whatever set of CPUs is desired.

kernel/rcu/Makefile

@@ -9,6 +9,5 @@ obj-$(CONFIG_TINY_SRCU) += srcutiny.o
 obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
 obj-$(CONFIG_RCU_PERF_TEST) += rcuperf.o
 obj-$(CONFIG_TREE_RCU) += tree.o
-obj-$(CONFIG_PREEMPT_RCU) += tree.o
 obj-$(CONFIG_TINY_RCU) += tiny.o
 obj-$(CONFIG_RCU_NEED_SEGCBLIST) += rcu_segcblist.o

kernel/rcu/rcu.h

@@ -198,33 +198,6 @@ static inline void debug_rcu_head_unqueue(struct rcu_head *head)
 }
 #endif	/* #else !CONFIG_DEBUG_OBJECTS_RCU_HEAD */
 
-void kfree(const void *);
-
-/*
- * Reclaim the specified callback, either by invoking it (non-lazy case)
- * or freeing it directly (lazy case).  Return true if lazy, false otherwise.
- */
-static inline bool __rcu_reclaim(const char *rn, struct rcu_head *head)
-{
-	rcu_callback_t f;
-	unsigned long offset = (unsigned long)head->func;
-
-	rcu_lock_acquire(&rcu_callback_map);
-	if (__is_kfree_rcu_offset(offset)) {
-		trace_rcu_invoke_kfree_callback(rn, head, offset);
-		kfree((void *)head - offset);
-		rcu_lock_release(&rcu_callback_map);
-		return true;
-	} else {
-		trace_rcu_invoke_callback(rn, head);
-		f = head->func;
-		WRITE_ONCE(head->func, (rcu_callback_t)0L);
-		f(head);
-		rcu_lock_release(&rcu_callback_map);
-		return false;
-	}
-}
-
 #ifdef CONFIG_RCU_STALL_COMMON
 
 extern int rcu_cpu_stall_ftrace_dump;
@@ -281,7 +254,7 @@ void rcu_test_sync_prims(void);
  */
 extern void resched_cpu(int cpu);
 
-#if defined(SRCU) || !defined(TINY_RCU)
+#if defined(CONFIG_SRCU) || !defined(CONFIG_TINY_RCU)
 
 #include <linux/rcu_node_tree.h>
 
@@ -418,7 +391,7 @@ do {									\
 #define raw_lockdep_assert_held_rcu_node(p)				\
 	lockdep_assert_held(&ACCESS_PRIVATE(p, lock))
 
-#endif /* #if defined(SRCU) || !defined(TINY_RCU) */
+#endif /* #if defined(CONFIG_SRCU) || !defined(CONFIG_TINY_RCU) */
 
 #ifdef CONFIG_SRCU
 void srcu_init(void);
@@ -454,7 +427,7 @@ enum rcutorture_type {
 	INVALID_RCU_FLAVOR
 };
 
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU)
+#if defined(CONFIG_TREE_RCU)
 void rcutorture_get_gp_data(enum rcutorture_type test_type, int *flags,
 			    unsigned long *gp_seq);
 void do_trace_rcu_torture_read(const char *rcutorturename,

kernel/rcu/rcu_segcblist.c

@@ -20,14 +20,10 @@ void rcu_cblist_init(struct rcu_cblist *rclp)
 	rclp->head = NULL;
 	rclp->tail = &rclp->head;
 	rclp->len = 0;
-	rclp->len_lazy = 0;
 }
 
 /*
  * Enqueue an rcu_head structure onto the specified callback list.
- * This function assumes that the callback is non-lazy because it
- * is intended for use by no-CBs CPUs, which do not distinguish
- * between lazy and non-lazy RCU callbacks.
  */
 void rcu_cblist_enqueue(struct rcu_cblist *rclp, struct rcu_head *rhp)
 {
@@ -54,7 +50,6 @@ void rcu_cblist_flush_enqueue(struct rcu_cblist *drclp,
 	else
 		drclp->tail = &drclp->head;
 	drclp->len = srclp->len;
-	drclp->len_lazy = srclp->len_lazy;
 	if (!rhp) {
 		rcu_cblist_init(srclp);
 	} else {
@@ -62,16 +57,12 @@ void rcu_cblist_flush_enqueue(struct rcu_cblist *drclp,
 		srclp->head = rhp;
 		srclp->tail = &rhp->next;
 		WRITE_ONCE(srclp->len, 1);
-		srclp->len_lazy = 0;
 	}
 }
 
 /*
  * Dequeue the oldest rcu_head structure from the specified callback
- * list.  This function assumes that the callback is non-lazy, but
- * the caller can later invoke rcu_cblist_dequeued_lazy() if it
- * finds otherwise (and if it cares about laziness).  This allows
- * different users to have different ways of determining laziness.
+ * list.
  */
 struct rcu_head *rcu_cblist_dequeue(struct rcu_cblist *rclp)
 {
@@ -161,7 +152,6 @@ void rcu_segcblist_init(struct rcu_segcblist *rsclp)
 	for (i = 0; i < RCU_CBLIST_NSEGS; i++)
 		rsclp->tails[i] = &rsclp->head;
 	rcu_segcblist_set_len(rsclp, 0);
-	rsclp->len_lazy = 0;
 	rsclp->enabled = 1;
 }
 
@@ -173,7 +163,6 @@ void rcu_segcblist_disable(struct rcu_segcblist *rsclp)
 {
 	WARN_ON_ONCE(!rcu_segcblist_empty(rsclp));
 	WARN_ON_ONCE(rcu_segcblist_n_cbs(rsclp));
-	WARN_ON_ONCE(rcu_segcblist_n_lazy_cbs(rsclp));
 	rsclp->enabled = 0;
 }
 
@@ -253,11 +242,9 @@ bool rcu_segcblist_nextgp(struct rcu_segcblist *rsclp, unsigned long *lp)
  * absolutely not OK for it to ever miss posting a callback.
  */
 void rcu_segcblist_enqueue(struct rcu_segcblist *rsclp,
-			   struct rcu_head *rhp, bool lazy)
+			   struct rcu_head *rhp)
 {
 	rcu_segcblist_inc_len(rsclp);
-	if (lazy)
-		rsclp->len_lazy++;
 	smp_mb(); /* Ensure counts are updated before callback is enqueued. */
 	rhp->next = NULL;
 	WRITE_ONCE(*rsclp->tails[RCU_NEXT_TAIL], rhp);
@@ -275,15 +262,13 @@ void rcu_segcblist_enqueue(struct rcu_segcblist *rsclp,
  * period.  You have been warned.
  */
 bool rcu_segcblist_entrain(struct rcu_segcblist *rsclp,
-			   struct rcu_head *rhp, bool lazy)
+			   struct rcu_head *rhp)
 {
 	int i;
 
 	if (rcu_segcblist_n_cbs(rsclp) == 0)
 		return false;
 	rcu_segcblist_inc_len(rsclp);
-	if (lazy)
-		rsclp->len_lazy++;
 	smp_mb(); /* Ensure counts are updated before callback is entrained. */
 	rhp->next = NULL;
 	for (i = RCU_NEXT_TAIL; i > RCU_DONE_TAIL; i--)
@@ -307,8 +292,6 @@ bool rcu_segcblist_entrain(struct rcu_segcblist *rsclp,
 void rcu_segcblist_extract_count(struct rcu_segcblist *rsclp,
 					       struct rcu_cblist *rclp)
 {
-	rclp->len_lazy += rsclp->len_lazy;
-	rsclp->len_lazy = 0;
 	rclp->len = rcu_segcblist_xchg_len(rsclp, 0);
 }
 
@@ -361,9 +344,7 @@ void rcu_segcblist_extract_pend_cbs(struct rcu_segcblist *rsclp,
 void rcu_segcblist_insert_count(struct rcu_segcblist *rsclp,
 				struct rcu_cblist *rclp)
 {
-	rsclp->len_lazy += rclp->len_lazy;
 	rcu_segcblist_add_len(rsclp, rclp->len);
-	rclp->len_lazy = 0;
 	rclp->len = 0;
 }
 

kernel/rcu/rcu_segcblist.h

@@ -15,15 +15,6 @@ static inline long rcu_cblist_n_cbs(struct rcu_cblist *rclp)
 	return READ_ONCE(rclp->len);
 }
 
-/*
- * Account for the fact that a previously dequeued callback turned out
- * to be marked as lazy.
- */
-static inline void rcu_cblist_dequeued_lazy(struct rcu_cblist *rclp)
-{
-	rclp->len_lazy--;
-}
-
 void rcu_cblist_init(struct rcu_cblist *rclp);
 void rcu_cblist_enqueue(struct rcu_cblist *rclp, struct rcu_head *rhp);
 void rcu_cblist_flush_enqueue(struct rcu_cblist *drclp,
@@ -59,18 +50,6 @@ static inline long rcu_segcblist_n_cbs(struct rcu_segcblist *rsclp)
 #endif
 }
 
-/* Return number of lazy callbacks in segmented callback list. */
-static inline long rcu_segcblist_n_lazy_cbs(struct rcu_segcblist *rsclp)
-{
-	return rsclp->len_lazy;
-}
-
-/* Return number of lazy callbacks in segmented callback list. */
-static inline long rcu_segcblist_n_nonlazy_cbs(struct rcu_segcblist *rsclp)
-{
-	return rcu_segcblist_n_cbs(rsclp) - rsclp->len_lazy;
-}
-
 /*
  * Is the specified rcu_segcblist enabled, for example, not corresponding
  * to an offline CPU?
@@ -106,9 +85,9 @@ struct rcu_head *rcu_segcblist_first_cb(struct rcu_segcblist *rsclp);
 struct rcu_head *rcu_segcblist_first_pend_cb(struct rcu_segcblist *rsclp);
 bool rcu_segcblist_nextgp(struct rcu_segcblist *rsclp, unsigned long *lp);
 void rcu_segcblist_enqueue(struct rcu_segcblist *rsclp,
-			   struct rcu_head *rhp, bool lazy);
+			   struct rcu_head *rhp);
 bool rcu_segcblist_entrain(struct rcu_segcblist *rsclp,
-			   struct rcu_head *rhp, bool lazy);
+			   struct rcu_head *rhp);
 void rcu_segcblist_extract_count(struct rcu_segcblist *rsclp,
 				 struct rcu_cblist *rclp);
 void rcu_segcblist_extract_done_cbs(struct rcu_segcblist *rsclp,

kernel/rcu/rcuperf.c

@@ -86,6 +86,7 @@ torture_param(bool, shutdown, RCUPERF_SHUTDOWN,
 	      "Shutdown at end of performance tests.");
 torture_param(int, verbose, 1, "Enable verbose debugging printk()s");
 torture_param(int, writer_holdoff, 0, "Holdoff (us) between GPs, zero to disable");
+torture_param(int, kfree_rcu_test, 0, "Do we run a kfree_rcu() perf test?");
 
 static char *perf_type = "rcu";
 module_param(perf_type, charp, 0444);
@@ -105,8 +106,8 @@ static atomic_t n_rcu_perf_writer_finished;
 static wait_queue_head_t shutdown_wq;
 static u64 t_rcu_perf_writer_started;
 static u64 t_rcu_perf_writer_finished;
-static unsigned long b_rcu_perf_writer_started;
-static unsigned long b_rcu_perf_writer_finished;
+static unsigned long b_rcu_gp_test_started;
+static unsigned long b_rcu_gp_test_finished;
 static DEFINE_PER_CPU(atomic_t, n_async_inflight);
 
 #define MAX_MEAS 10000
@@ -378,10 +379,10 @@ rcu_perf_writer(void *arg)
 	if (atomic_inc_return(&n_rcu_perf_writer_started) >= nrealwriters) {
 		t_rcu_perf_writer_started = t;
 		if (gp_exp) {
-			b_rcu_perf_writer_started =
+			b_rcu_gp_test_started =
 				cur_ops->exp_completed() / 2;
 		} else {
-			b_rcu_perf_writer_started = cur_ops->get_gp_seq();
+			b_rcu_gp_test_started = cur_ops->get_gp_seq();
 		}
 	}
 
@@ -429,10 +430,10 @@ rcu_perf_writer(void *arg)
 				PERFOUT_STRING("Test complete");
 				t_rcu_perf_writer_finished = t;
 				if (gp_exp) {
-					b_rcu_perf_writer_finished =
+					b_rcu_gp_test_finished =
 						cur_ops->exp_completed() / 2;
 				} else {
-					b_rcu_perf_writer_finished =
+					b_rcu_gp_test_finished =
 						cur_ops->get_gp_seq();
 				}
 				if (shutdown) {
@@ -515,8 +516,8 @@ rcu_perf_cleanup(void)
 			 t_rcu_perf_writer_finished -
 			 t_rcu_perf_writer_started,
 			 ngps,
-			 rcuperf_seq_diff(b_rcu_perf_writer_finished,
-					  b_rcu_perf_writer_started));
+			 rcuperf_seq_diff(b_rcu_gp_test_finished,
+					  b_rcu_gp_test_started));
 		for (i = 0; i < nrealwriters; i++) {
 			if (!writer_durations)
 				break;
@@ -584,6 +585,159 @@ rcu_perf_shutdown(void *arg)
 	return -EINVAL;
 }
 
+/*
+ * kfree_rcu() performance tests: Start a kfree_rcu() loop on all CPUs for number
+ * of iterations and measure total time and number of GP for all iterations to complete.
+ */
+
+torture_param(int, kfree_nthreads, -1, "Number of threads running loops of kfree_rcu().");
+torture_param(int, kfree_alloc_num, 8000, "Number of allocations and frees done in an iteration.");
+torture_param(int, kfree_loops, 10, "Number of loops doing kfree_alloc_num allocations and frees.");
+
+static struct task_struct **kfree_reader_tasks;
+static int kfree_nrealthreads;
+static atomic_t n_kfree_perf_thread_started;
+static atomic_t n_kfree_perf_thread_ended;
+
+struct kfree_obj {
+	char kfree_obj[8];
+	struct rcu_head rh;
+};
+
+static int
+kfree_perf_thread(void *arg)
+{
+	int i, loop = 0;
+	long me = (long)arg;
+	struct kfree_obj *alloc_ptr;
+	u64 start_time, end_time;
+
+	VERBOSE_PERFOUT_STRING("kfree_perf_thread task started");
+	set_cpus_allowed_ptr(current, cpumask_of(me % nr_cpu_ids));
+	set_user_nice(current, MAX_NICE);
+
+	start_time = ktime_get_mono_fast_ns();
+
+	if (atomic_inc_return(&n_kfree_perf_thread_started) >= kfree_nrealthreads) {
+		if (gp_exp)
+			b_rcu_gp_test_started = cur_ops->exp_completed() / 2;
+		else
+			b_rcu_gp_test_started = cur_ops->get_gp_seq();
+	}
+
+	do {
+		for (i = 0; i < kfree_alloc_num; i++) {
+			alloc_ptr = kmalloc(sizeof(struct kfree_obj), GFP_KERNEL);
+			if (!alloc_ptr)
+				return -ENOMEM;
+
+			kfree_rcu(alloc_ptr, rh);
+		}
+
+		cond_resched();
+	} while (!torture_must_stop() && ++loop < kfree_loops);
+
+	if (atomic_inc_return(&n_kfree_perf_thread_ended) >= kfree_nrealthreads) {
+		end_time = ktime_get_mono_fast_ns();
+
+		if (gp_exp)
+			b_rcu_gp_test_finished = cur_ops->exp_completed() / 2;
+		else
+			b_rcu_gp_test_finished = cur_ops->get_gp_seq();
+
+		pr_alert("Total time taken by all kfree'ers: %llu ns, loops: %d, batches: %ld\n",
+		       (unsigned long long)(end_time - start_time), kfree_loops,
+		       rcuperf_seq_diff(b_rcu_gp_test_finished, b_rcu_gp_test_started));
+		if (shutdown) {
+			smp_mb(); /* Assign before wake. */
+			wake_up(&shutdown_wq);
+		}
+	}
+
+	torture_kthread_stopping("kfree_perf_thread");
+	return 0;
+}
+
+static void
+kfree_perf_cleanup(void)
+{
+	int i;
+
+	if (torture_cleanup_begin())
+		return;
+
+	if (kfree_reader_tasks) {
+		for (i = 0; i < kfree_nrealthreads; i++)
+			torture_stop_kthread(kfree_perf_thread,
+					     kfree_reader_tasks[i]);
+		kfree(kfree_reader_tasks);
+	}
+
+	torture_cleanup_end();
+}
+
+/*
+ * shutdown kthread.  Just waits to be awakened, then shuts down system.
+ */
+static int
+kfree_perf_shutdown(void *arg)
+{
+	do {
+		wait_event(shutdown_wq,
+			   atomic_read(&n_kfree_perf_thread_ended) >=
+			   kfree_nrealthreads);
+	} while (atomic_read(&n_kfree_perf_thread_ended) < kfree_nrealthreads);
+
+	smp_mb(); /* Wake before output. */
+
+	kfree_perf_cleanup();
+	kernel_power_off();
+	return -EINVAL;
+}
+
+static int __init
+kfree_perf_init(void)
+{
+	long i;
+	int firsterr = 0;
+
+	kfree_nrealthreads = compute_real(kfree_nthreads);
+	/* Start up the kthreads. */
+	if (shutdown) {
+		init_waitqueue_head(&shutdown_wq);
+		firsterr = torture_create_kthread(kfree_perf_shutdown, NULL,
+						  shutdown_task);
+		if (firsterr)
+			goto unwind;
+		schedule_timeout_uninterruptible(1);
+	}
+
+	kfree_reader_tasks = kcalloc(kfree_nrealthreads, sizeof(kfree_reader_tasks[0]),
+			       GFP_KERNEL);
+	if (kfree_reader_tasks == NULL) {
+		firsterr = -ENOMEM;
+		goto unwind;
+	}
+
+	for (i = 0; i < kfree_nrealthreads; i++) {
+		firsterr = torture_create_kthread(kfree_perf_thread, (void *)i,
+						  kfree_reader_tasks[i]);
+		if (firsterr)
+			goto unwind;
+	}
+
+	while (atomic_read(&n_kfree_perf_thread_started) < kfree_nrealthreads)
+		schedule_timeout_uninterruptible(1);
+
+	torture_init_end();
+	return 0;
+
+unwind:
+	torture_init_end();
+	kfree_perf_cleanup();
+	return firsterr;
+}
+
 static int __init
 rcu_perf_init(void)
 {
@@ -616,6 +770,9 @@ rcu_perf_init(void)
 	if (cur_ops->init)
 		cur_ops->init();
 
+	if (kfree_rcu_test)
+		return kfree_perf_init();
+
 	nrealwriters = compute_real(nwriters);
 	nrealreaders = compute_real(nreaders);
 	atomic_set(&n_rcu_perf_reader_started, 0);

kernel/rcu/srcutiny.c

@@ -103,7 +103,7 @@ EXPORT_SYMBOL_GPL(__srcu_read_unlock);
 
 /*
  * Workqueue handler to drive one grace period and invoke any callbacks
- * that become ready as a result.  Single-CPU and !PREEMPT operation
+ * that become ready as a result.  Single-CPU and !PREEMPTION operation
  * means that we get away with murder on synchronization.  ;-)
  */
 void srcu_drive_gp(struct work_struct *wp)

kernel/rcu/srcutree.c

@@ -530,7 +530,7 @@ static void srcu_gp_end(struct srcu_struct *ssp)
 	idx = rcu_seq_state(ssp->srcu_gp_seq);
 	WARN_ON_ONCE(idx != SRCU_STATE_SCAN2);
 	cbdelay = srcu_get_delay(ssp);
-	ssp->srcu_last_gp_end = ktime_get_mono_fast_ns();
+	WRITE_ONCE(ssp->srcu_last_gp_end, ktime_get_mono_fast_ns());
 	rcu_seq_end(&ssp->srcu_gp_seq);
 	gpseq = rcu_seq_current(&ssp->srcu_gp_seq);
 	if (ULONG_CMP_LT(ssp->srcu_gp_seq_needed_exp, gpseq))
@@ -762,6 +762,7 @@ static bool srcu_might_be_idle(struct srcu_struct *ssp)
 	unsigned long flags;
 	struct srcu_data *sdp;
 	unsigned long t;
+	unsigned long tlast;
 
 	/* If the local srcu_data structure has callbacks, not idle.  */
 	local_irq_save(flags);
@@ -780,9 +781,9 @@ static bool srcu_might_be_idle(struct srcu_struct *ssp)
 
 	/* First, see if enough time has passed since the last GP. */
 	t = ktime_get_mono_fast_ns();
+	tlast = READ_ONCE(ssp->srcu_last_gp_end);
 	if (exp_holdoff == 0 ||
-	    time_in_range_open(t, ssp->srcu_last_gp_end,
-			       ssp->srcu_last_gp_end + exp_holdoff))
+	    time_in_range_open(t, tlast, tlast + exp_holdoff))
 		return false; /* Too soon after last GP. */
 
 	/* Next, check for probable idleness. */
@@ -853,7 +854,7 @@ static void __call_srcu(struct srcu_struct *ssp, struct rcu_head *rhp,
 	local_irq_save(flags);
 	sdp = this_cpu_ptr(ssp->sda);
 	spin_lock_rcu_node(sdp);
-	rcu_segcblist_enqueue(&sdp->srcu_cblist, rhp, false);
+	rcu_segcblist_enqueue(&sdp->srcu_cblist, rhp);
 	rcu_segcblist_advance(&sdp->srcu_cblist,
 			      rcu_seq_current(&ssp->srcu_gp_seq));
 	s = rcu_seq_snap(&ssp->srcu_gp_seq);
@@ -1052,7 +1053,7 @@ void srcu_barrier(struct srcu_struct *ssp)
 		sdp->srcu_barrier_head.func = srcu_barrier_cb;
 		debug_rcu_head_queue(&sdp->srcu_barrier_head);
 		if (!rcu_segcblist_entrain(&sdp->srcu_cblist,
-					   &sdp->srcu_barrier_head, 0)) {
+					   &sdp->srcu_barrier_head)) {
 			debug_rcu_head_unqueue(&sdp->srcu_barrier_head);
 			atomic_dec(&ssp->srcu_barrier_cpu_cnt);
 		}

kernel/rcu/tiny.c

@@ -22,6 +22,7 @@
 #include <linux/time.h>
 #include <linux/cpu.h>
 #include <linux/prefetch.h>
+#include <linux/slab.h>
 
 #include "rcu.h"
 
@@ -73,6 +74,31 @@ void rcu_sched_clock_irq(int user)
 	}
 }
 
+/*
+ * Reclaim the specified callback, either by invoking it for non-kfree cases or
+ * freeing it directly (for kfree). Return true if kfreeing, false otherwise.
+ */
+static inline bool rcu_reclaim_tiny(struct rcu_head *head)
+{
+	rcu_callback_t f;
+	unsigned long offset = (unsigned long)head->func;
+
+	rcu_lock_acquire(&rcu_callback_map);
+	if (__is_kfree_rcu_offset(offset)) {
+		trace_rcu_invoke_kfree_callback("", head, offset);
+		kfree((void *)head - offset);
+		rcu_lock_release(&rcu_callback_map);
+		return true;
+	}
+
+	trace_rcu_invoke_callback("", head);
+	f = head->func;
+	WRITE_ONCE(head->func, (rcu_callback_t)0L);
+	f(head);
+	rcu_lock_release(&rcu_callback_map);
+	return false;
+}
+
 /* Invoke the RCU callbacks whose grace period has elapsed.  */
 static __latent_entropy void rcu_process_callbacks(struct softirq_action *unused)
 {
@@ -100,7 +126,7 @@ static __latent_entropy void rcu_process_callbacks(struct softirq_action *unused
 		prefetch(next);
 		debug_rcu_head_unqueue(list);
 		local_bh_disable();
-		__rcu_reclaim("", list);
+		rcu_reclaim_tiny(list);
 		local_bh_enable();
 		list = next;
 	}

kernel/rcu/tree.h

@@ -16,7 +16,6 @@
 #include <linux/cpumask.h>
 #include <linux/seqlock.h>
 #include <linux/swait.h>
-#include <linux/stop_machine.h>
 #include <linux/rcu_node_tree.h>
 
 #include "rcu_segcblist.h"
@@ -182,8 +181,8 @@ struct rcu_data {
 	bool rcu_need_heavy_qs;		/* GP old, so heavy quiescent state! */
 	bool rcu_urgent_qs;		/* GP old need light quiescent state. */
 	bool rcu_forced_tick;		/* Forced tick to provide QS. */
+	bool rcu_forced_tick_exp;	/*   ... provide QS to expedited GP. */
 #ifdef CONFIG_RCU_FAST_NO_HZ
-	bool all_lazy;			/* All CPU's CBs lazy at idle start? */
 	unsigned long last_accelerate;	/* Last jiffy CBs were accelerated. */
 	unsigned long last_advance_all;	/* Last jiffy CBs were all advanced. */
 	int tick_nohz_enabled_snap;	/* Previously seen value from sysfs. */
@@ -368,18 +367,6 @@ struct rcu_state {
 #define RCU_GP_CLEANUP   7	/* Grace-period cleanup started. */
 #define RCU_GP_CLEANED   8	/* Grace-period cleanup complete. */
 
-static const char * const gp_state_names[] = {
-	"RCU_GP_IDLE",
-	"RCU_GP_WAIT_GPS",
-	"RCU_GP_DONE_GPS",
-	"RCU_GP_ONOFF",
-	"RCU_GP_INIT",
-	"RCU_GP_WAIT_FQS",
-	"RCU_GP_DOING_FQS",
-	"RCU_GP_CLEANUP",
-	"RCU_GP_CLEANED",
-};
-
 /*
  * In order to export the rcu_state name to the tracing tools, it
  * needs to be added in the __tracepoint_string section.
@@ -403,8 +390,6 @@ static const char *tp_rcu_varname __used __tracepoint_string = rcu_name;
 #define RCU_NAME rcu_name
 #endif /* #else #ifdef CONFIG_TRACING */
 
-int rcu_dynticks_snap(struct rcu_data *rdp);
-
 /* Forward declarations for tree_plugin.h */
 static void rcu_bootup_announce(void);
 static void rcu_qs(void);
@@ -415,7 +400,6 @@ static bool rcu_preempt_has_tasks(struct rcu_node *rnp);
 static int rcu_print_task_exp_stall(struct rcu_node *rnp);
 static void rcu_preempt_check_blocked_tasks(struct rcu_node *rnp);
 static void rcu_flavor_sched_clock_irq(int user);
-void call_rcu(struct rcu_head *head, rcu_callback_t func);
 static void dump_blkd_tasks(struct rcu_node *rnp, int ncheck);
 static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags);
 static void rcu_preempt_boost_start_gp(struct rcu_node *rnp);

kernel/rcu/tree_stall.h

@@ -163,7 +163,7 @@ static void rcu_iw_handler(struct irq_work *iwp)
 //
 // Printing RCU CPU stall warnings
 
-#ifdef CONFIG_PREEMPTION
+#ifdef CONFIG_PREEMPT_RCU
 
 /*
  * Dump detailed information for all tasks blocking the current RCU
@@ -215,7 +215,7 @@ static int rcu_print_task_stall(struct rcu_node *rnp)
 	return ndetected;
 }
 
-#else /* #ifdef CONFIG_PREEMPTION */
+#else /* #ifdef CONFIG_PREEMPT_RCU */
 
 /*
  * Because preemptible RCU does not exist, we never have to check for
@@ -233,7 +233,7 @@ static int rcu_print_task_stall(struct rcu_node *rnp)
 {
 	return 0;
 }
-#endif /* #else #ifdef CONFIG_PREEMPTION */
+#endif /* #else #ifdef CONFIG_PREEMPT_RCU */
 
 /*
  * Dump stacks of all tasks running on stalled CPUs.  First try using
@@ -263,11 +263,9 @@ static void print_cpu_stall_fast_no_hz(char *cp, int cpu)
 {
 	struct rcu_data *rdp = &per_cpu(rcu_data, cpu);
 
-	sprintf(cp, "last_accelerate: %04lx/%04lx, Nonlazy posted: %c%c%c",
+	sprintf(cp, "last_accelerate: %04lx/%04lx dyntick_enabled: %d",
 		rdp->last_accelerate & 0xffff, jiffies & 0xffff,
-		".l"[rdp->all_lazy],
-		".L"[!rcu_segcblist_n_nonlazy_cbs(&rdp->cblist)],
-		".D"[!!rdp->tick_nohz_enabled_snap]);
+		!!rdp->tick_nohz_enabled_snap);
 }
 
 #else /* #ifdef CONFIG_RCU_FAST_NO_HZ */
@@ -279,6 +277,28 @@ static void print_cpu_stall_fast_no_hz(char *cp, int cpu)
 
 #endif /* #else #ifdef CONFIG_RCU_FAST_NO_HZ */
 
+static const char * const gp_state_names[] = {
+	[RCU_GP_IDLE] = "RCU_GP_IDLE",
+	[RCU_GP_WAIT_GPS] = "RCU_GP_WAIT_GPS",
+	[RCU_GP_DONE_GPS] = "RCU_GP_DONE_GPS",
+	[RCU_GP_ONOFF] = "RCU_GP_ONOFF",
+	[RCU_GP_INIT] = "RCU_GP_INIT",
+	[RCU_GP_WAIT_FQS] = "RCU_GP_WAIT_FQS",
+	[RCU_GP_DOING_FQS] = "RCU_GP_DOING_FQS",
+	[RCU_GP_CLEANUP] = "RCU_GP_CLEANUP",
+	[RCU_GP_CLEANED] = "RCU_GP_CLEANED",
+};
+
+/*
+ * Convert a ->gp_state value to a character string.
+ */
+static const char *gp_state_getname(short gs)
+{
+	if (gs < 0 || gs >= ARRAY_SIZE(gp_state_names))
+		return "???";
+	return gp_state_names[gs];
+}
+
 /*
  * Print out diagnostic information for the specified stalled CPU.
  *

kernel/rcu/update.c

@@ -40,6 +40,7 @@
 #include <linux/rcupdate_wait.h>
 #include <linux/sched/isolation.h>
 #include <linux/kprobes.h>
+#include <linux/slab.h>
 
 #define CREATE_TRACE_POINTS
 
@@ -51,9 +52,7 @@
 #define MODULE_PARAM_PREFIX "rcupdate."
 
 #ifndef CONFIG_TINY_RCU
-extern int rcu_expedited; /* from sysctl */
 module_param(rcu_expedited, int, 0);
-extern int rcu_normal; /* from sysctl */
 module_param(rcu_normal, int, 0);
 static int rcu_normal_after_boot;
 module_param(rcu_normal_after_boot, int, 0);
@@ -218,6 +217,7 @@ static int __init rcu_set_runtime_mode(void)
 {
 	rcu_test_sync_prims();
 	rcu_scheduler_active = RCU_SCHEDULER_RUNNING;
+	kfree_rcu_scheduler_running();
 	rcu_test_sync_prims();
 	return 0;
 }
@@ -435,7 +435,7 @@ struct debug_obj_descr rcuhead_debug_descr = {
 EXPORT_SYMBOL_GPL(rcuhead_debug_descr);
 #endif /* #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD */
 
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU) || defined(CONFIG_RCU_TRACE)
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_RCU_TRACE)
 void do_trace_rcu_torture_read(const char *rcutorturename, struct rcu_head *rhp,
 			       unsigned long secs,
 			       unsigned long c_old, unsigned long c)
@@ -853,14 +853,22 @@ static void test_callback(struct rcu_head *r)
 
 DEFINE_STATIC_SRCU(early_srcu);
 
+struct early_boot_kfree_rcu {
+	struct rcu_head rh;
+};
+
 static void early_boot_test_call_rcu(void)
 {
 	static struct rcu_head head;
 	static struct rcu_head shead;
+	struct early_boot_kfree_rcu *rhp;
 
 	call_rcu(&head, test_callback);
 	if (IS_ENABLED(CONFIG_SRCU))
 		call_srcu(&early_srcu, &shead, test_callback);
+	rhp = kmalloc(sizeof(*rhp), GFP_KERNEL);
+	if (!WARN_ON_ONCE(!rhp))
+		kfree_rcu(rhp, rh);
 }
 
 void rcu_early_boot_tests(void)

kernel/sysctl.c

@@ -1268,7 +1268,7 @@ static struct ctl_table kern_table[] = {
 		.proc_handler	= proc_do_static_key,
 	},
 #endif
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU)
+#if defined(CONFIG_TREE_RCU)
 	{
 		.procname	= "panic_on_rcu_stall",
 		.data		= &sysctl_panic_on_rcu_stall,

net/tipc/crypto.c

@@ -257,9 +257,6 @@ static char *tipc_key_change_dump(struct tipc_key old, struct tipc_key new,
 #define tipc_aead_rcu_ptr(rcu_ptr, lock)				\
 	rcu_dereference_protected((rcu_ptr), lockdep_is_held(lock))
 
-#define tipc_aead_rcu_swap(rcu_ptr, ptr, lock)				\
-	rcu_swap_protected((rcu_ptr), (ptr), lockdep_is_held(lock))
-
 #define tipc_aead_rcu_replace(rcu_ptr, ptr, lock)			\
 do {									\
 	typeof(rcu_ptr) __tmp = rcu_dereference_protected((rcu_ptr),	\
@@ -1189,7 +1186,7 @@ static bool tipc_crypto_key_try_align(struct tipc_crypto *rx, u8 new_pending)
 
 	/* Move passive key if any */
 	if (key.passive) {
-		tipc_aead_rcu_swap(rx->aead[key.passive], tmp2, &rx->lock);
+		tmp2 = rcu_replace_pointer(rx->aead[key.passive], tmp2, lockdep_is_held(&rx->lock));
 		x = (key.passive - key.pending + new_pending) % KEY_MAX;
 		new_passive = (x <= 0) ? x + KEY_MAX : x;
 	}

tools/testing/selftests/rcutorture/bin/cpus2use.sh

@@ -15,8 +15,15 @@ then
 	exit 0
 fi
 ncpus=`grep '^processor' /proc/cpuinfo | wc -l`
-idlecpus=`mpstat | tail -1 | \
-	awk -v ncpus=$ncpus '{ print ncpus * ($7 + $NF) / 100 }'`
+if mpstat -V > /dev/null 2>&1
+then
+	idlecpus=`mpstat | tail -1 | \
+		awk -v ncpus=$ncpus '{ print ncpus * ($7 + $NF) / 100 }'`
+else
+	# No mpstat command, so use all available CPUs.
+	echo The mpstat command is not available, so greedily using all CPUs.
+	idlecpus=$ncpus
+fi
 awk -v ncpus=$ncpus -v idlecpus=$idlecpus < /dev/null '
 BEGIN {
 	cpus2use = idlecpus;

tools/testing/selftests/rcutorture/bin/jitter.sh

@@ -23,25 +23,39 @@ spinmax=${4-1000}
 
 n=1
 
-starttime=`awk 'BEGIN { print systime(); }' < /dev/null`
+starttime=`gawk 'BEGIN { print systime(); }' < /dev/null`
+
+nohotplugcpus=
+for i in /sys/devices/system/cpu/cpu[0-9]*
+do
+	if test -f $i/online
+	then
+		:
+	else
+		curcpu=`echo $i | sed -e 's/^[^0-9]*//'`
+		nohotplugcpus="$nohotplugcpus $curcpu"
+	fi
+done
 
 while :
 do
 	# Check for done.
-	t=`awk -v s=$starttime 'BEGIN { print systime() - s; }' < /dev/null`
+	t=`gawk -v s=$starttime 'BEGIN { print systime() - s; }' < /dev/null`
 	if test "$t" -gt "$duration"
 	then
 		exit 0;
 	fi
 
 	# Set affinity to randomly selected online CPU
-	cpus=`grep 1 /sys/devices/system/cpu/*/online |
-		sed -e 's,/[^/]*$,,' -e 's/^[^0-9]*//'`
-
-	# Do not leave out poor old cpu0 which may not be hot-pluggable
-	if [ ! -f "/sys/devices/system/cpu/cpu0/online" ]; then
-		cpus="0 $cpus"
+	if cpus=`grep 1 /sys/devices/system/cpu/*/online 2>&1 |
+		 sed -e 's,/[^/]*$,,' -e 's/^[^0-9]*//'`
+	then
+		:
+	else
+		cpus=
 	fi
+	# Do not leave out non-hot-pluggable CPUs
+	cpus="$cpus $nohotplugcpus"
 
 	cpumask=`awk -v cpus="$cpus" -v me=$me -v n=$n 'BEGIN {
 		srand(n + me + systime());

tools/testing/selftests/rcutorture/bin/kvm-recheck-rcu.sh

@@ -25,6 +25,7 @@ stopstate="`grep 'End-test grace-period state: g' $i/console.log 2> /dev/null |
 	    tail -1 | sed -e 's/^\[[ 0-9.]*] //' |
 	    awk '{ print \"[\" $1 \" \" $5 \" \" $6 \" \" $7 \"]\"; }' |
 	    tr -d '\012\015'`"
+fwdprog="`grep 'rcu_torture_fwd_prog_cr Duration' $i/console.log 2> /dev/null | sed -e 's/^\[[^]]*] //' | sort -k15nr | head -1 | awk '{ print $14 " " $15 }'`"
 if test -z "$ngps"
 then
 	echo "$configfile ------- " $stopstate
@@ -39,7 +40,7 @@ else
 			BEGIN { print ngps / dur }' < /dev/null`
 		title="$title ($ngpsps/s)"
 	fi
-	echo $title $stopstate
+	echo $title $stopstate $fwdprog
 	nclosecalls=`grep --binary-files=text 'torture: Reader Batch' $i/console.log | tail -1 | awk '{for (i=NF-8;i<=NF;i++) sum+=$i; } END {print sum}'`
 	if test -z "$nclosecalls"
 	then

tools/testing/selftests/rcutorture/bin/kvm-test-1-run.sh

@@ -123,7 +123,7 @@ qemu_args=$5
 boot_args=$6
 
 cd $KVM
-kstarttime=`awk 'BEGIN { print systime() }' < /dev/null`
+kstarttime=`gawk 'BEGIN { print systime() }' < /dev/null`
 if test -z "$TORTURE_BUILDONLY"
 then
 	echo ' ---' `date`: Starting kernel
@@ -133,11 +133,10 @@ fi
 qemu_args="-enable-kvm -nographic $qemu_args"
 cpu_count=`configNR_CPUS.sh $resdir/ConfigFragment`
 cpu_count=`configfrag_boot_cpus "$boot_args" "$config_template" "$cpu_count"`
-vcpus=`identify_qemu_vcpus`
-if test $cpu_count -gt $vcpus
+if test "$cpu_count" -gt "$TORTURE_ALLOTED_CPUS"
 then
-	echo CPU count limited from $cpu_count to $vcpus | tee -a $resdir/Warnings
-	cpu_count=$vcpus
+	echo CPU count limited from $cpu_count to $TORTURE_ALLOTED_CPUS | tee -a $resdir/Warnings
+	cpu_count=$TORTURE_ALLOTED_CPUS
 fi
 qemu_args="`specify_qemu_cpus "$QEMU" "$qemu_args" "$cpu_count"`"
 
@@ -177,7 +176,7 @@ do
 	then
 		qemu_pid=`cat "$resdir/qemu_pid"`
 	fi
-	kruntime=`awk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null`
+	kruntime=`gawk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null`
 	if test -z "$qemu_pid" || kill -0 "$qemu_pid" > /dev/null 2>&1
 	then
 		if test $kruntime -ge $seconds
@@ -213,7 +212,7 @@ then
 	oldline="`tail $resdir/console.log`"
 	while :
 	do
-		kruntime=`awk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null`
+		kruntime=`gawk 'BEGIN { print systime() - '"$kstarttime"' }' < /dev/null`
 		if kill -0 $qemu_pid > /dev/null 2>&1
 		then
 			:

tools/testing/selftests/rcutorture/bin/kvm.sh

@@ -24,7 +24,9 @@ dur=$((30*60))
 dryrun=""
 KVM="`pwd`/tools/testing/selftests/rcutorture"; export KVM
 PATH=${KVM}/bin:$PATH; export PATH
-TORTURE_ALLOTED_CPUS=""
+. functions.sh
+
+TORTURE_ALLOTED_CPUS="`identify_qemu_vcpus`"
 TORTURE_DEFCONFIG=defconfig
 TORTURE_BOOT_IMAGE=""
 TORTURE_INITRD="$KVM/initrd"; export TORTURE_INITRD
@@ -40,8 +42,6 @@ cpus=0
 ds=`date +%Y.%m.%d-%H:%M:%S`
 jitter="-1"
 
-. functions.sh
-
 usage () {
 	echo "Usage: $scriptname optional arguments:"
 	echo "       --bootargs kernel-boot-arguments"
@@ -93,6 +93,11 @@ do
 		checkarg --cpus "(number)" "$#" "$2" '^[0-9]*$' '^--'
 		cpus=$2
 		TORTURE_ALLOTED_CPUS="$2"
+		max_cpus="`identify_qemu_vcpus`"
+		if test "$TORTURE_ALLOTED_CPUS" -gt "$max_cpus"
+		then
+			TORTURE_ALLOTED_CPUS=$max_cpus
+		fi
 		shift
 		;;
 	--datestamp)
@@ -198,9 +203,10 @@ fi
 
 CONFIGFRAG=${KVM}/configs/${TORTURE_SUITE}; export CONFIGFRAG
 
+defaultconfigs="`tr '\012' ' ' < $CONFIGFRAG/CFLIST`"
 if test -z "$configs"
 then
-	configs="`cat $CONFIGFRAG/CFLIST`"
+	configs=$defaultconfigs
 fi
 
 if test -z "$resdir"
@@ -209,7 +215,7 @@ then
 fi
 
 # Create a file of test-name/#cpus pairs, sorted by decreasing #cpus.
-touch $T/cfgcpu
+configs_derep=
 for CF in $configs
 do
 	case $CF in
@@ -222,15 +228,21 @@ do
 		CF1=$CF
 		;;
 	esac
+	for ((cur_rep=0;cur_rep<$config_reps;cur_rep++))
+	do
+		configs_derep="$configs_derep $CF1"
+	done
+done
+touch $T/cfgcpu
+configs_derep="`echo $configs_derep | sed -e "s/\<CFLIST\>/$defaultconfigs/g"`"
+for CF1 in $configs_derep
+do
 	if test -f "$CONFIGFRAG/$CF1"
 	then
 		cpu_count=`configNR_CPUS.sh $CONFIGFRAG/$CF1`
 		cpu_count=`configfrag_boot_cpus "$TORTURE_BOOTARGS" "$CONFIGFRAG/$CF1" "$cpu_count"`
 		cpu_count=`configfrag_boot_maxcpus "$TORTURE_BOOTARGS" "$CONFIGFRAG/$CF1" "$cpu_count"`
-		for ((cur_rep=0;cur_rep<$config_reps;cur_rep++))
-		do
-			echo $CF1 $cpu_count >> $T/cfgcpu
-		done
+		echo $CF1 $cpu_count >> $T/cfgcpu
 	else
 		echo "The --configs file $CF1 does not exist, terminating."
 		exit 1

tools/testing/selftests/rcutorture/bin/mkinitrd.sh

@@ -20,58 +20,9 @@ if [ -s "$D/initrd/init" ]; then
     exit 0
 fi
 
-T=${TMPDIR-/tmp}/mkinitrd.sh.$$
-trap 'rm -rf $T' 0 2
-mkdir $T
-
-cat > $T/init << '__EOF___'
-#!/bin/sh
-# Run in userspace a few milliseconds every second.  This helps to
-# exercise the NO_HZ_FULL portions of RCU.  The 192 instances of "a" was
-# empirically shown to give a nice multi-millisecond burst of user-mode
-# execution on a 2GHz CPU, as desired.  Modern CPUs will vary from a
-# couple of milliseconds up to perhaps 100 milliseconds, which is an
-# acceptable range.
-#
-# Why not calibrate an exact delay?  Because within this initrd, we
-# are restricted to Bourne-shell builtins, which as far as I know do not
-# provide any means of obtaining a fine-grained timestamp.
-
-a4="a a a a"
-a16="$a4 $a4 $a4 $a4"
-a64="$a16 $a16 $a16 $a16"
-a192="$a64 $a64 $a64"
-while :
-do
-	q=
-	for i in $a192
-	do
-		q="$q $i"
-	done
-	sleep 1
-done
-__EOF___
-
-# Try using dracut to create initrd
-if command -v dracut >/dev/null 2>&1
-then
-	echo Creating $D/initrd using dracut.
-	# Filesystem creation
-	dracut --force --no-hostonly --no-hostonly-cmdline --module "base" $T/initramfs.img
-	cd $D
-	mkdir -p initrd
-	cd initrd
-	zcat $T/initramfs.img | cpio -id
-	cp $T/init init
-	chmod +x init
-	echo Done creating $D/initrd using dracut
-	exit 0
-fi
-
-# No dracut, so create a C-language initrd/init program and statically
-# link it.  This results in a very small initrd, but might be a bit less
-# future-proof than dracut.
-echo "Could not find dracut, attempting C initrd"
+# Create a C-language initrd/init infinite-loop program and statically
+# link it.  This results in a very small initrd.
+echo "Creating a statically linked C-language initrd"
 cd $D
 mkdir -p initrd
 cd initrd