Commit 0e50338c authored by Daniel Vetter's avatar Daniel Vetter

drm/i915: Precompute static ddi_pll_sel values in encoders

This way only the dynamic WRPLL selection for hdmi ddi mode is
done in intel_ddi_pll_select.

v2: Don't clobber the precomputed values when selecting clocks fro
hdmi encoders.
v3 (from Paulo): Rebase on top of the s/IS_HASWELL/HAS_DDI/ patch.
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: default avatarPaulo Zanoni <przanoni@gmail.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
parent 3fcf305b
......@@ -315,8 +315,10 @@ static bool intel_crt_compute_config(struct intel_encoder *encoder,
pipe_config->pipe_bpp = 24;
/* FDI must always be 2.7 GHz */
if (HAS_DDI(dev))
if (HAS_DDI(dev)) {
pipe_config->ddi_pll_sel = PORT_CLK_SEL_SPLL;
pipe_config->port_clock = 135000 * 2;
}
return true;
}
......
......@@ -403,6 +403,7 @@ void intel_ddi_put_crtc_pll(struct drm_crtc *crtc)
I915_WRITE(WRPLL_CTL1, val & ~WRPLL_PLL_ENABLE);
POSTING_READ(WRPLL_CTL1);
}
intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_NONE;
break;
case PORT_CLK_SEL_WRPLL2:
plls->wrpll2_refcount--;
......@@ -413,13 +414,12 @@ void intel_ddi_put_crtc_pll(struct drm_crtc *crtc)
I915_WRITE(WRPLL_CTL2, val & ~WRPLL_PLL_ENABLE);
POSTING_READ(WRPLL_CTL2);
}
intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_NONE;
break;
}
WARN(plls->wrpll1_refcount < 0, "Invalid WRPLL1 refcount\n");
WARN(plls->wrpll2_refcount < 0, "Invalid WRPLL2 refcount\n");
intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_NONE;
}
#define LC_FREQ 2700
......@@ -739,7 +739,6 @@ bool intel_ddi_pll_select(struct intel_crtc *intel_crtc)
{
struct drm_crtc *crtc = &intel_crtc->base;
struct intel_encoder *intel_encoder = intel_ddi_get_crtc_encoder(crtc);
struct drm_encoder *encoder = &intel_encoder->base;
struct drm_i915_private *dev_priv = crtc->dev->dev_private;
struct intel_ddi_plls *plls = &dev_priv->ddi_plls;
int type = intel_encoder->type;
......@@ -748,26 +747,7 @@ bool intel_ddi_pll_select(struct intel_crtc *intel_crtc)
intel_ddi_put_crtc_pll(crtc);
if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
switch (intel_dp->link_bw) {
case DP_LINK_BW_1_62:
intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
break;
case DP_LINK_BW_2_7:
intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
break;
case DP_LINK_BW_5_4:
intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
break;
default:
DRM_ERROR("Link bandwidth %d unsupported\n",
intel_dp->link_bw);
return false;
}
} else if (type == INTEL_OUTPUT_HDMI) {
if (type == INTEL_OUTPUT_HDMI) {
uint32_t reg, val;
unsigned p, n2, r2;
......@@ -808,14 +788,6 @@ bool intel_ddi_pll_select(struct intel_crtc *intel_crtc)
plls->wrpll2_refcount++;
intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_WRPLL2;
}
} else if (type == INTEL_OUTPUT_ANALOG) {
DRM_DEBUG_KMS("Using SPLL on pipe %c\n",
pipe_name(pipe));
intel_crtc->config.ddi_pll_sel = PORT_CLK_SEL_SPLL;
} else {
WARN(1, "Invalid DDI encoder type %d\n", type);
return false;
}
return true;
......
......@@ -745,6 +745,22 @@ intel_dp_connector_unregister(struct intel_connector *intel_connector)
intel_connector_unregister(intel_connector);
}
static void
hsw_dp_set_ddi_pll_sel(struct intel_crtc_config *pipe_config, int link_bw)
{
switch (link_bw) {
case DP_LINK_BW_1_62:
pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_810;
break;
case DP_LINK_BW_2_7:
pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_1350;
break;
case DP_LINK_BW_5_4:
pipe_config->ddi_pll_sel = PORT_CLK_SEL_LCPLL_2700;
break;
}
}
static void
intel_dp_set_clock(struct intel_encoder *encoder,
struct intel_crtc_config *pipe_config, int link_bw)
......@@ -756,8 +772,6 @@ intel_dp_set_clock(struct intel_encoder *encoder,
if (IS_G4X(dev)) {
divisor = gen4_dpll;
count = ARRAY_SIZE(gen4_dpll);
} else if (HAS_DDI(dev)) {
/* Haswell has special-purpose DP DDI clocks. */
} else if (HAS_PCH_SPLIT(dev)) {
divisor = pch_dpll;
count = ARRAY_SIZE(pch_dpll);
......@@ -928,7 +942,10 @@ intel_dp_compute_config(struct intel_encoder *encoder,
&pipe_config->dp_m2_n2);
}
intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
if (HAS_DDI(dev))
hsw_dp_set_ddi_pll_sel(pipe_config, intel_dp->link_bw);
else
intel_dp_set_clock(encoder, pipe_config, intel_dp->link_bw);
return true;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment