Merge tag 'media/v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull second set of media updates from Mauro Carvalho Chehab:

 - Move drivers for really old legacy hardware to staging.  Those are
   using obsolete media kAPIs and are for hardware that nobody uses for
   years.  Simply not worth porting them to the new kAPIs.  Of course,
   if anyone pops up to fix, we can move them back from there

 - While not too late, do some API fixups at the new colorspace API,
   added for v3.19

 - Some improvements for rcar_vin driver

 - Some fixups at cx88 and vivid drivers

 - Some Documentation fixups

* tag 'media/v3.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] bq/c-qcam, w9966, pms: move to staging in preparation for removal
  [media] tlg2300: move to staging in preparation for removal
  [media] vino/saa7191: move to staging in preparation for removal
  [media] MAINTAINERS: vivi -> vivid
  [media] cx88: remove leftover start_video_dma() call
  [media] cx88: add missing alloc_ctx support
  [media] v4l2-ioctl: WARN_ON if querycap didn't fill device_caps
  [media] vivid: fix CROP_BOUNDS typo for video output
  [media] DocBook media: update version number and document changes
  [media] vivid.txt: document new controls
  [media] DocBook media: add missing ycbcr_enc and quantization fields
  [media] v4l2-mediabus.h: use two __u16 instead of two __u32
  [media] rcar_vin: Fix interrupt enable in progressive
  [media] rcar_vin: Enable VSYNC field toggle mode
  [media] rcar_vin: Add scaling support
  [media] rcar_vin: Add DT support for r8a7793 and r8a7794 SoCs
  [media] rcar_vin: Add YUYV capture format support

Documentation/DocBook/media/v4l/compat.xml

@@ -2579,6 +2579,18 @@ fields changed from _s32 to _u32.
       </orderedlist>
     </section>
 
+    <section>
+      <title>V4L2 in Linux 3.19</title>
+      <orderedlist>
+	<listitem>
+	  <para>Rewrote Colorspace chapter, added new &v4l2-ycbcr-encoding;
+and &v4l2-quantization; fields to &v4l2-pix-format;, &v4l2-pix-format-mplane;
+and &v4l2-mbus-framefmt;.
+	  </para>
+	</listitem>
+      </orderedlist>
+    </section>
+
     <section id="other">
       <title>Relation of V4L2 to other Linux multimedia APIs</title>
 

Documentation/DocBook/media/v4l/pixfmt.xml

@@ -138,9 +138,25 @@ applicable values.</para></entry>
 	<row>
 	  <entry>__u32</entry>
 	  <entry><structfield>flags</structfield></entry>
-	    <entry>Flags set by the application or driver, see <xref
+	  <entry>Flags set by the application or driver, see <xref
 linkend="format-flags" />.</entry>
 	</row>
+	<row>
+	  <entry>&v4l2-ycbcr-encoding;</entry>
+	  <entry><structfield>ycbcr_enc</structfield></entry>
+	  <entry>This information supplements the
+<structfield>colorspace</structfield> and must be set by the driver for
+capture streams and by the application for output streams,
+see <xref linkend="colorspaces" />.</entry>
+	</row>
+	<row>
+	  <entry>&v4l2-quantization;</entry>
+	  <entry><structfield>quantization</structfield></entry>
+	  <entry>This information supplements the
+<structfield>colorspace</structfield> and must be set by the driver for
+capture streams and by the application for output streams,
+see <xref linkend="colorspaces" />.</entry>
+	</row>
       </tbody>
     </tgroup>
   </table>
@@ -231,10 +247,26 @@ codes can be used.</entry>
 	  <entry><structfield>flags</structfield></entry>
 	  <entry>Flags set by the application or driver, see <xref
 linkend="format-flags" />.</entry>
+	</row>
+	<row>
+	  <entry>&v4l2-ycbcr-encoding;</entry>
+	  <entry><structfield>ycbcr_enc</structfield></entry>
+	  <entry>This information supplements the
+<structfield>colorspace</structfield> and must be set by the driver for
+capture streams and by the application for output streams,
+see <xref linkend="colorspaces" />.</entry>
+	</row>
+	<row>
+	  <entry>&v4l2-quantization;</entry>
+	  <entry><structfield>quantization</structfield></entry>
+	  <entry>This information supplements the
+<structfield>colorspace</structfield> and must be set by the driver for
+capture streams and by the application for output streams,
+see <xref linkend="colorspaces" />.</entry>
 	</row>
         <row>
           <entry>__u8</entry>
-          <entry><structfield>reserved[10]</structfield></entry>
+          <entry><structfield>reserved[8]</structfield></entry>
           <entry>Reserved for future extensions. Should be zeroed by the
            application.</entry>
         </row>

Documentation/DocBook/media/v4l/subdev-formats.xml

@@ -33,9 +33,25 @@
 	  <entry>Image colorspace, from &v4l2-colorspace;. See
 	  <xref linkend="colorspaces" /> for details.</entry>
 	</row>
+	<row>
+	  <entry>&v4l2-ycbcr-encoding;</entry>
+	  <entry><structfield>ycbcr_enc</structfield></entry>
+	  <entry>This information supplements the
+<structfield>colorspace</structfield> and must be set by the driver for
+capture streams and by the application for output streams,
+see <xref linkend="colorspaces" />.</entry>
+	</row>
+	<row>
+	  <entry>&v4l2-quantization;</entry>
+	  <entry><structfield>quantization</structfield></entry>
+	  <entry>This information supplements the
+<structfield>colorspace</structfield> and must be set by the driver for
+capture streams and by the application for output streams,
+see <xref linkend="colorspaces" />.</entry>
+	</row>
 	<row>
 	  <entry>__u32</entry>
-	  <entry><structfield>reserved</structfield>[7]</entry>
+	  <entry><structfield>reserved</structfield>[6]</entry>
 	  <entry>Reserved for future extensions. Applications and drivers must
 	  set the array to zero.</entry>
 	</row>

Documentation/DocBook/media/v4l/v4l2.xml

@@ -151,6 +151,15 @@ structs, ioctls) must be noted in more detail in the history chapter
 (compat.xml), along with the possible impact on existing drivers and
 applications. -->
 
+      <revision>
+	<revnumber>3.19</revnumber>
+	<date>2014-12-05</date>
+	<authorinitials>hv</authorinitials>
+	<revremark>Rewrote Colorspace chapter, added new &v4l2-ycbcr-encoding; and &v4l2-quantization; fields
+to &v4l2-pix-format;, &v4l2-pix-format-mplane; and &v4l2-mbus-framefmt;.
+	</revremark>
+      </revision>
+
       <revision>
 	<revnumber>3.17</revnumber>
 	<date>2014-08-04</date>
@@ -539,7 +548,7 @@ and discussions on the V4L mailing list.</revremark>
 </partinfo>
 
 <title>Video for Linux Two API Specification</title>
- <subtitle>Revision 3.17</subtitle>
+ <subtitle>Revision 3.19</subtitle>
 
   <chapter id="common">
     &sub-common;

Documentation/devicetree/bindings/media/rcar_vin.txt

@@ -6,6 +6,8 @@ family of devices. The current blocks are always slaves and suppot one input
 channel which can be either RGB, YUYV or BT656.
 
  - compatible: Must be one of the following
+   - "renesas,vin-r8a7794" for the R8A7794 device
+   - "renesas,vin-r8a7793" for the R8A7793 device
    - "renesas,vin-r8a7791" for the R8A7791 device
    - "renesas,vin-r8a7790" for the R8A7790 device
    - "renesas,vin-r8a7779" for the R8A7779 device

Documentation/video4linux/vivid.txt

@@ -640,6 +640,21 @@ Colorspace: selects which colorspace should be used when generating the image.
 	Changing the colorspace will result in the V4L2_EVENT_SOURCE_CHANGE
 	to be sent since it emulates a detected colorspace change.
 
+Y'CbCr Encoding: selects which Y'CbCr encoding should be used when generating
+	a Y'CbCr image.	This only applies if the CSC Colorbar test pattern is
+	selected, and if the format is set to a Y'CbCr format as opposed to an
+	RGB format.
+
+	Changing the Y'CbCr encoding will result in the V4L2_EVENT_SOURCE_CHANGE
+	to be sent since it emulates a detected colorspace change.
+
+Quantization: selects which quantization should be used for the RGB or Y'CbCr
+	encoding when generating the test pattern. This only applies if the CSC
+	Colorbar test pattern is selected.
+
+	Changing the quantization will result in the V4L2_EVENT_SOURCE_CHANGE
+	to be sent since it emulates a detected colorspace change.
+
 Limited RGB Range (16-235): selects if the RGB range of the HDMI source should
 	be limited or full range. This combines with the Digital Video 'Rx RGB
 	Quantization Range' control and can be used to test what happens if

MAINTAINERS

@@ -10237,13 +10237,13 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/via/via-velocity.*
 
-VIVI VIRTUAL VIDEO DRIVER
+VIVID VIRTUAL VIDEO DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	linux-media@vger.kernel.org
 T:	git git://linuxtv.org/media_tree.git
 W:	http://linuxtv.org
 S:	Maintained
-F:	drivers/media/platform/vivi*
+F:	drivers/media/platform/vivid/*
 
 VLAN (802.1Q)
 M:	Patrick McHardy <kaber@trash.net>

drivers/media/Kconfig

@@ -160,7 +160,6 @@ source "drivers/media/usb/Kconfig"
 source "drivers/media/pci/Kconfig"
 source "drivers/media/platform/Kconfig"
 source "drivers/media/mmc/Kconfig"
-source "drivers/media/parport/Kconfig"
 source "drivers/media/radio/Kconfig"
 
 comment "Supported FireWire (IEEE 1394) Adapters"

drivers/media/Makefile

@@ -28,6 +28,6 @@ obj-y += rc/
 # Finally, merge the drivers that require the core
 #
 
-obj-y += common/ platform/ pci/ usb/ mmc/ firewire/ parport/
+obj-y += common/ platform/ pci/ usb/ mmc/ firewire/
 obj-$(CONFIG_VIDEO_DEV) += radio/
 

drivers/media/i2c/Kconfig

@@ -284,15 +284,6 @@ config VIDEO_SAA711X
 	  To compile this driver as a module, choose M here: the
 	  module will be called saa7115.
 
-config VIDEO_SAA7191
-	tristate "Philips SAA7191 video decoder"
-	depends on VIDEO_V4L2 && I2C
-	---help---
-	  Support for the Philips SAA7191 video decoder.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called saa7191.
-
 config VIDEO_TVP514X
 	tristate "Texas Instruments TVP514x video decoder"
 	depends on VIDEO_V4L2 && I2C

drivers/media/i2c/Makefile

@@ -18,7 +18,6 @@ obj-$(CONFIG_VIDEO_SAA711X) += saa7115.o
 obj-$(CONFIG_VIDEO_SAA717X) += saa717x.o
 obj-$(CONFIG_VIDEO_SAA7127) += saa7127.o
 obj-$(CONFIG_VIDEO_SAA7185) += saa7185.o
-obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o
 obj-$(CONFIG_VIDEO_SAA6752HS) += saa6752hs.o
 obj-$(CONFIG_VIDEO_ADV7170) += adv7170.o
 obj-$(CONFIG_VIDEO_ADV7175) += adv7175.o

drivers/media/pci/cx88/cx88-blackbird.c

@@ -647,6 +647,7 @@ static int queue_setup(struct vb2_queue *q, const struct v4l2_format *fmt,
 	dev->ts_packet_size  = 188 * 4;
 	dev->ts_packet_count  = 32;
 	sizes[0] = dev->ts_packet_size * dev->ts_packet_count;
+	alloc_ctxs[0] = dev->alloc_ctx;
 	return 0;
 }
 
@@ -662,14 +663,11 @@ static void buffer_finish(struct vb2_buffer *vb)
 {
 	struct cx8802_dev *dev = vb->vb2_queue->drv_priv;
 	struct cx88_buffer *buf = container_of(vb, struct cx88_buffer, vb);
-	struct sg_table *sgt = vb2_dma_sg_plane_desc(vb, 0);
 	struct cx88_riscmem *risc = &buf->risc;
 
 	if (risc->cpu)
 		pci_free_consistent(dev->pci, risc->size, risc->cpu, risc->dma);
 	memset(risc, 0, sizeof(*risc));
-
-	dma_unmap_sg(&dev->pci->dev, sgt->sgl, sgt->nents, DMA_FROM_DEVICE);
 }
 
 static void buffer_queue(struct vb2_buffer *vb)

drivers/media/pci/cx88/cx88-dvb.c

@@ -92,6 +92,7 @@ static int queue_setup(struct vb2_queue *q, const struct v4l2_format *fmt,
 	dev->ts_packet_size  = 188 * 4;
 	dev->ts_packet_count = dvb_buf_tscnt;
 	sizes[0] = dev->ts_packet_size * dev->ts_packet_count;
+	alloc_ctxs[0] = dev->alloc_ctx;
 	*num_buffers = dvb_buf_tscnt;
 	return 0;
 }
@@ -108,14 +109,11 @@ static void buffer_finish(struct vb2_buffer *vb)
 {
 	struct cx8802_dev *dev = vb->vb2_queue->drv_priv;
 	struct cx88_buffer *buf = container_of(vb, struct cx88_buffer, vb);
-	struct sg_table *sgt = vb2_dma_sg_plane_desc(vb, 0);
 	struct cx88_riscmem *risc = &buf->risc;
 
 	if (risc->cpu)
 		pci_free_consistent(dev->pci, risc->size, risc->cpu, risc->dma);
 	memset(risc, 0, sizeof(*risc));
-
-	dma_unmap_sg(&dev->pci->dev, sgt->sgl, sgt->nents, DMA_FROM_DEVICE);
 }
 
 static void buffer_queue(struct vb2_buffer *vb)

drivers/media/pci/cx88/cx88-mpeg.c

@@ -235,10 +235,6 @@ int cx8802_buf_prepare(struct vb2_queue *q, struct cx8802_dev *dev,
 		return -EINVAL;
 	vb2_set_plane_payload(&buf->vb, 0, size);
 
-	rc = dma_map_sg(&dev->pci->dev, sgt->sgl, sgt->nents, DMA_FROM_DEVICE);
-	if (!rc)
-		return -EIO;
-
 	rc = cx88_risc_databuffer(dev->pci, risc, sgt->sgl,
 			     dev->ts_packet_size, dev->ts_packet_count, 0);
 	if (rc) {
@@ -733,6 +729,11 @@ static int cx8802_probe(struct pci_dev *pci_dev,
 	if (NULL == dev)
 		goto fail_core;
 	dev->pci = pci_dev;
+	dev->alloc_ctx = vb2_dma_sg_init_ctx(&pci_dev->dev);
+	if (IS_ERR(dev->alloc_ctx)) {
+		err = PTR_ERR(dev->alloc_ctx);
+		goto fail_core;
+	}
 	dev->core = core;
 
 	/* Maintain a reference so cx88-video can query the 8802 device. */
@@ -752,6 +753,7 @@ static int cx8802_probe(struct pci_dev *pci_dev,
 	return 0;
 
  fail_free:
+	vb2_dma_sg_cleanup_ctx(dev->alloc_ctx);
 	kfree(dev);
  fail_core:
 	core->dvbdev = NULL;
@@ -798,6 +800,7 @@ static void cx8802_remove(struct pci_dev *pci_dev)
 	/* common */
 	cx8802_fini_common(dev);
 	cx88_core_put(dev->core,dev->pci);
+	vb2_dma_sg_cleanup_ctx(dev->alloc_ctx);
 	kfree(dev);
 }
 

drivers/media/pci/cx88/cx88-vbi.c

@@ -120,6 +120,7 @@ static int queue_setup(struct vb2_queue *q, const struct v4l2_format *fmt,
 		sizes[0] = VBI_LINE_NTSC_COUNT * VBI_LINE_LENGTH * 2;
 	else
 		sizes[0] = VBI_LINE_PAL_COUNT * VBI_LINE_LENGTH * 2;
+	alloc_ctxs[0] = dev->alloc_ctx;
 	return 0;
 }
 
@@ -131,7 +132,6 @@ static int buffer_prepare(struct vb2_buffer *vb)
 	struct sg_table *sgt = vb2_dma_sg_plane_desc(vb, 0);
 	unsigned int lines;
 	unsigned int size;
-	int rc;
 
 	if (dev->core->tvnorm & V4L2_STD_525_60)
 		lines = VBI_LINE_NTSC_COUNT;
@@ -142,10 +142,6 @@ static int buffer_prepare(struct vb2_buffer *vb)
 		return -EINVAL;
 	vb2_set_plane_payload(vb, 0, size);
 
-	rc = dma_map_sg(&dev->pci->dev, sgt->sgl, sgt->nents, DMA_FROM_DEVICE);
-	if (!rc)
-		return -EIO;
-
 	cx88_risc_buffer(dev->pci, &buf->risc, sgt->sgl,
 			 0, VBI_LINE_LENGTH * lines,
 			 VBI_LINE_LENGTH, 0,
@@ -157,14 +153,11 @@ static void buffer_finish(struct vb2_buffer *vb)
 {
 	struct cx8800_dev *dev = vb->vb2_queue->drv_priv;
 	struct cx88_buffer *buf = container_of(vb, struct cx88_buffer, vb);
-	struct sg_table *sgt = vb2_dma_sg_plane_desc(vb, 0);
 	struct cx88_riscmem *risc = &buf->risc;
 
 	if (risc->cpu)
 		pci_free_consistent(dev->pci, risc->size, risc->cpu, risc->dma);
 	memset(risc, 0, sizeof(*risc));
-
-	dma_unmap_sg(&dev->pci->dev, sgt->sgl, sgt->nents, DMA_FROM_DEVICE);
 }
 
 static void buffer_queue(struct vb2_buffer *vb)

drivers/media/pci/cx88/cx88-video.c

@@ -440,6 +440,7 @@ static int queue_setup(struct vb2_queue *q, const struct v4l2_format *fmt,
 
 	*num_planes = 1;
 	sizes[0] = (dev->fmt->depth * core->width * core->height) >> 3;
+	alloc_ctxs[0] = dev->alloc_ctx;
 	return 0;
 }
 
@@ -449,7 +450,6 @@ static int buffer_prepare(struct vb2_buffer *vb)
 	struct cx88_core *core = dev->core;
 	struct cx88_buffer *buf = container_of(vb, struct cx88_buffer, vb);
 	struct sg_table *sgt = vb2_dma_sg_plane_desc(vb, 0);
-	int rc;
 
 	buf->bpl = core->width * dev->fmt->depth >> 3;
 
@@ -457,10 +457,6 @@ static int buffer_prepare(struct vb2_buffer *vb)
 		return -EINVAL;
 	vb2_set_plane_payload(vb, 0, core->height * buf->bpl);
 
-	rc = dma_map_sg(&dev->pci->dev, sgt->sgl, sgt->nents, DMA_FROM_DEVICE);
-	if (!rc)
-		return -EIO;
-
 	switch (core->field) {
 	case V4L2_FIELD_TOP:
 		cx88_risc_buffer(dev->pci, &buf->risc,
@@ -505,14 +501,11 @@ static void buffer_finish(struct vb2_buffer *vb)
 {
 	struct cx8800_dev *dev = vb->vb2_queue->drv_priv;
 	struct cx88_buffer *buf = container_of(vb, struct cx88_buffer, vb);
-	struct sg_table *sgt = vb2_dma_sg_plane_desc(vb, 0);
 	struct cx88_riscmem *risc = &buf->risc;
 
 	if (risc->cpu)
 		pci_free_consistent(dev->pci, risc->size, risc->cpu, risc->dma);
 	memset(risc, 0, sizeof(*risc));
-
-	dma_unmap_sg(&dev->pci->dev, sgt->sgl, sgt->nents, DMA_FROM_DEVICE);
 }
 
 static void buffer_queue(struct vb2_buffer *vb)
@@ -530,7 +523,6 @@ static void buffer_queue(struct vb2_buffer *vb)
 
 	if (list_empty(&q->active)) {
 		list_add_tail(&buf->list, &q->active);
-		start_video_dma(dev, q, buf);
 		buf->count    = q->count++;
 		dprintk(2,"[%p/%d] buffer_queue - first active\n",
 			buf, buf->vb.v4l2_buf.index);
@@ -1345,6 +1337,12 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
 		err = -EIO;
 		goto fail_core;
 	}
+	dev->alloc_ctx = vb2_dma_sg_init_ctx(&pci_dev->dev);
+	if (IS_ERR(dev->alloc_ctx)) {
+		err = PTR_ERR(dev->alloc_ctx);
+		goto fail_core;
+	}
+
 
 	/* initialize driver struct */
 	spin_lock_init(&dev->slock);
@@ -1549,6 +1547,7 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
 	free_irq(pci_dev->irq, dev);
 	mutex_unlock(&core->lock);
 fail_core:
+	vb2_dma_sg_cleanup_ctx(dev->alloc_ctx);
 	core->v4ldev = NULL;
 	cx88_core_put(core,dev->pci);
 fail_free:
@@ -1582,6 +1581,7 @@ static void cx8800_finidev(struct pci_dev *pci_dev)
 
 	/* free memory */
 	cx88_core_put(core,dev->pci);
+	vb2_dma_sg_cleanup_ctx(dev->alloc_ctx);
 	kfree(dev);
 }
 

drivers/media/pci/cx88/cx88.h

@@ -485,6 +485,7 @@ struct cx8800_dev {
 	/* pci i/o */
 	struct pci_dev             *pci;
 	unsigned char              pci_rev,pci_lat;
+	void			   *alloc_ctx;
 
 	const struct cx8800_fmt    *fmt;
 
@@ -548,6 +549,7 @@ struct cx8802_dev {
 	/* pci i/o */
 	struct pci_dev             *pci;
 	unsigned char              pci_rev,pci_lat;
+	void			   *alloc_ctx;
 
 	/* dma queues */
 	struct cx88_dmaqueue       mpegq;

drivers/media/platform/Kconfig

@@ -65,14 +65,6 @@ config VIDEO_TIMBERDALE
 	---help---
 	  Add support for the Video In peripherial of the timberdale FPGA.
 
-config VIDEO_VINO
-	tristate "SGI Vino Video For Linux"
-	depends on I2C && SGI_IP22 && VIDEO_V4L2
-	select VIDEO_SAA7191 if MEDIA_SUBDRV_AUTOSELECT
-	help
-	  Say Y here to build in support for the Vino video input system found
-	  on SGI Indy machines.
-
 config VIDEO_M32R_AR
 	tristate "AR devices"
 	depends on VIDEO_V4L2

drivers/media/platform/Makefile

@@ -2,9 +2,6 @@
 # Makefile for the video capture/playback device drivers.
 #
 
-obj-$(CONFIG_VIDEO_VINO) += indycam.o
-obj-$(CONFIG_VIDEO_VINO) += vino.o
-
 obj-$(CONFIG_VIDEO_TIMBERDALE)	+= timblogiw.o
 obj-$(CONFIG_VIDEO_M32R_AR_M64278) += arv.o
 

drivers/media/platform/vivid/vivid-vid-out.c

@@ -625,7 +625,7 @@ int vivid_vid_out_g_selection(struct file *file, void *priv,
 		sel->r = dev->fmt_out_rect;
 		break;
 	case V4L2_SEL_TGT_CROP_BOUNDS:
-		if (!dev->has_compose_out)
+		if (!dev->has_crop_out)
 			return -EINVAL;
 		sel->r = vivid_max_rect;
 		break;

drivers/media/usb/Kconfig

@@ -24,7 +24,6 @@ if MEDIA_ANALOG_TV_SUPPORT
 	comment "Analog TV USB devices"
 source "drivers/media/usb/pvrusb2/Kconfig"
 source "drivers/media/usb/hdpvr/Kconfig"
-source "drivers/media/usb/tlg2300/Kconfig"
 source "drivers/media/usb/usbvision/Kconfig"
 source "drivers/media/usb/stk1160/Kconfig"
 source "drivers/media/usb/go7007/Kconfig"

drivers/media/usb/Makefile

@@ -16,7 +16,6 @@ obj-$(CONFIG_VIDEO_CPIA2) += cpia2/
 obj-$(CONFIG_VIDEO_AU0828) += au0828/
 obj-$(CONFIG_VIDEO_HDPVR)	+= hdpvr/
 obj-$(CONFIG_VIDEO_PVRUSB2) += pvrusb2/
-obj-$(CONFIG_VIDEO_TLG2300) += tlg2300/
 obj-$(CONFIG_VIDEO_USBVISION) += usbvision/
 obj-$(CONFIG_VIDEO_STK1160) += stk1160/
 obj-$(CONFIG_VIDEO_CX231XX) += cx231xx/

drivers/media/v4l2-core/v4l2-ioctl.c

@@ -1017,6 +1017,12 @@ static int v4l_querycap(const struct v4l2_ioctl_ops *ops,
 	ret = ops->vidioc_querycap(file, fh, cap);
 
 	cap->capabilities |= V4L2_CAP_EXT_PIX_FORMAT;
+	/*
+	 * Drivers MUST fill in device_caps, so check for this and
+	 * warn if it was forgotten.
+	 */
+	WARN_ON(!(cap->capabilities & V4L2_CAP_DEVICE_CAPS) ||
+		!cap->device_caps);
 	cap->device_caps |= V4L2_CAP_EXT_PIX_FORMAT;
 
 	return ret;

drivers/staging/media/Kconfig

@@ -27,12 +27,18 @@ source "drivers/staging/media/davinci_vpfe/Kconfig"
 
 source "drivers/staging/media/dt3155v4l/Kconfig"
 
+source "drivers/staging/media/tlg2300/Kconfig"
+
 source "drivers/staging/media/mn88472/Kconfig"
 
 source "drivers/staging/media/mn88473/Kconfig"
 
 source "drivers/staging/media/omap4iss/Kconfig"
 
+source "drivers/staging/media/parport/Kconfig"
+
+source "drivers/staging/media/vino/Kconfig"
+
 # Keep LIRC at the end, as it has sub-menus
 source "drivers/staging/media/lirc/Kconfig"
 

drivers/staging/media/Makefile

@@ -6,4 +6,7 @@ obj-$(CONFIG_VIDEO_DM365_VPFE)	+= davinci_vpfe/
 obj-$(CONFIG_VIDEO_OMAP4)	+= omap4iss/
 obj-$(CONFIG_DVB_MN88472)       += mn88472/
 obj-$(CONFIG_DVB_MN88473)       += mn88473/
+obj-y				+= parport/
+obj-$(CONFIG_VIDEO_TLG2300)	+= tlg2300/
+obj-y                           += vino/
 

drivers/media/parport/Kconfig → drivers/staging/media/parport/Kconfig

@@ -7,18 +7,22 @@ menuconfig MEDIA_PARPORT_SUPPORT
 
 if MEDIA_PARPORT_SUPPORT
 config VIDEO_BWQCAM
-	tristate "Quickcam BW Video For Linux"
+	tristate "Quickcam BW Video For Linux (Deprecated)"
 	depends on PARPORT && VIDEO_V4L2
 	select VIDEOBUF2_VMALLOC
 	help
 	  Say Y have if you the black and white version of the QuickCam
 	  camera. See the next option for the color version.
 
+	  This driver is deprecated and will be removed soon. If you have
+	  hardware for this and you want to work on this driver, then contact
+	  the linux-media mailinglist.
+
 	  To compile this driver as a module, choose M here: the
 	  module will be called bw-qcam.
 
 config VIDEO_CQCAM
-	tristate "QuickCam Colour Video For Linux"
+	tristate "QuickCam Colour Video For Linux (Deprecated)"
 	depends on PARPORT && VIDEO_V4L2
 	help
 	  This is the video4linux driver for the colour version of the
@@ -28,18 +32,26 @@ config VIDEO_CQCAM
 	  as a module (c-qcam).
 	  Read <file:Documentation/video4linux/CQcam.txt> for more information.
 
+	  This driver is deprecated and will be removed soon. If you have
+	  hardware for this and you want to work on this driver, then contact
+	  the linux-media mailinglist.
+
 config VIDEO_PMS
-	tristate "Mediavision Pro Movie Studio Video For Linux"
+	tristate "Mediavision Pro Movie Studio Video For Linux (Deprecated)"
 	depends on ISA && VIDEO_V4L2
 	help
 	  Say Y if you have the ISA Mediavision Pro Movie Studio
 	  capture card.
 
+	  This driver is deprecated and will be removed soon. If you have
+	  hardware for this and you want to work on this driver, then contact
+	  the linux-media mailinglist.
+
 	  To compile this driver as a module, choose M here: the
 	  module will be called pms.
 
 config VIDEO_W9966
-	tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
+	tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux (Deprecated)"
 	depends on PARPORT_1284 && PARPORT && VIDEO_V4L2
 	help
 	  Video4linux driver for Winbond's w9966 based Webcams.
@@ -50,4 +62,8 @@ config VIDEO_W9966
 
 	  Check out <file:Documentation/video4linux/w9966.txt> for more
 	  information.
+
+	  This driver is deprecated and will be removed soon. If you have
+	  hardware for this and you want to work on this driver, then contact
+	  the linux-media mailinglist.
 endif

drivers/media/usb/tlg2300/Kconfig → drivers/staging/media/tlg2300/Kconfig

 config VIDEO_TLG2300
-	tristate "Telegent TLG2300 USB video capture support"
+	tristate "Telegent TLG2300 USB video capture support (Deprecated)"
 	depends on VIDEO_DEV && I2C && SND && DVB_CORE
 	select VIDEO_TUNER
 	select VIDEO_TVEEPROM
@@ -12,5 +12,9 @@ config VIDEO_TLG2300
 	  This is a video4linux driver for Telegent tlg2300 based TV cards.
 	  The driver supports V4L2, DVB-T and radio.
 
+	  This driver is deprecated and will be removed soon. If you have
+	  hardware for this and you want to work on this driver, then contact
+	  the linux-media mailinglist.
+
 	  To compile this driver as a module, choose M here: the
 	  module will be called poseidon

drivers/staging/media/vino/Kconfig

+config VIDEO_VINO
+	tristate "SGI Vino Video For Linux (Deprecated)"
+	depends on I2C && SGI_IP22 && VIDEO_V4L2
+	select VIDEO_SAA7191 if MEDIA_SUBDRV_AUTOSELECT
+	help
+	  Say Y here to build in support for the Vino video input system found
+	  on SGI Indy machines.
+
+	  This driver is deprecated and will be removed soon. If you have
+	  hardware for this and you want to work on this driver, then contact
+	  the linux-media mailinglist.
+
+config VIDEO_SAA7191
+	tristate "Philips SAA7191 video decoder (Deprecated)"
+	depends on VIDEO_V4L2 && I2C
+	---help---
+	  Support for the Philips SAA7191 video decoder.
+
+	  This driver is deprecated and will be removed soon. If you have
+	  hardware for this and you want to work on this driver, then contact
+	  the linux-media mailinglist.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called saa7191.

drivers/staging/media/vino/Makefile

+obj-$(CONFIG_VIDEO_VINO) += indycam.o
+obj-$(CONFIG_VIDEO_VINO) += vino.o
+obj-$(CONFIG_VIDEO_SAA7191) += saa7191.o

include/uapi/linux/v4l2-mediabus.h

@@ -31,9 +31,9 @@ struct v4l2_mbus_framefmt {
 	__u32			code;
 	__u32			field;
 	__u32			colorspace;
-	__u32			ycbcr_enc;
-	__u32			quantization;
-	__u32			reserved[5];
+	__u16			ycbcr_enc;
+	__u16			quantization;
+	__u32			reserved[6];
 };
 
 #ifndef __KERNEL__