Commit 0ed2c016 authored by Matthias Beyer's avatar Matthias Beyer Committed by Greg Kroah-Hartman

Staging: bcm: Bcmchar.c: Renamed variable: "ucResetValue" -> "reset_val"

Signed-off-by: default avatarMatthias Beyer <mail@beyermatthias.de>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 5ab1b7f2
......@@ -686,7 +686,7 @@ static int bcm_char_ioctl_gpio_multi_request(void __user *argp,
struct bcm_gpio_multi_info *pgpio_multi_info =
(struct bcm_gpio_multi_info *)gpio_multi_info;
struct bcm_ioctl_buffer io_buff;
UCHAR ucResetValue[4];
UCHAR reset_val[4];
INT status = STATUS_FAILURE;
int bytes;
......@@ -724,14 +724,14 @@ static int bcm_char_ioctl_gpio_multi_request(void __user *argp,
if ((pgpio_multi_info[WIMAX_IDX].uiGPIOMask) &
(pgpio_multi_info[WIMAX_IDX].uiGPIOCommand)) {
/* Set 1's in GPIO OUTPUT REGISTER */
*(UINT *)ucResetValue = pgpio_multi_info[WIMAX_IDX].uiGPIOMask &
*(UINT *)reset_val = pgpio_multi_info[WIMAX_IDX].uiGPIOMask &
pgpio_multi_info[WIMAX_IDX].uiGPIOCommand &
pgpio_multi_info[WIMAX_IDX].uiGPIOValue;
if (*(UINT *) ucResetValue)
if (*(UINT *) reset_val)
status = wrmaltWithLock(ad,
BCM_GPIO_OUTPUT_SET_REG,
(PUINT)ucResetValue, sizeof(ULONG));
(PUINT)reset_val, sizeof(ULONG));
if (status != STATUS_SUCCESS) {
BCM_DEBUG_PRINT(ad, DBG_TYPE_PRINTK, 0, 0,
......@@ -740,14 +740,14 @@ static int bcm_char_ioctl_gpio_multi_request(void __user *argp,
}
/* Clear to 0's in GPIO OUTPUT REGISTER */
*(UINT *)ucResetValue =
*(UINT *)reset_val =
(pgpio_multi_info[WIMAX_IDX].uiGPIOMask &
pgpio_multi_info[WIMAX_IDX].uiGPIOCommand &
(~(pgpio_multi_info[WIMAX_IDX].uiGPIOValue)));
if (*(UINT *) ucResetValue)
if (*(UINT *) reset_val)
status = wrmaltWithLock(ad,
BCM_GPIO_OUTPUT_CLR_REG, (PUINT)ucResetValue,
BCM_GPIO_OUTPUT_CLR_REG, (PUINT)reset_val,
sizeof(ULONG));
if (status != STATUS_SUCCESS) {
......@@ -759,7 +759,7 @@ static int bcm_char_ioctl_gpio_multi_request(void __user *argp,
if (pgpio_multi_info[WIMAX_IDX].uiGPIOMask) {
bytes = rdmaltWithLock(ad, (UINT)GPIO_PIN_STATE_REGISTER,
(PUINT)ucResetValue, sizeof(UINT));
(PUINT)reset_val, sizeof(UINT));
if (bytes < 0) {
status = bytes;
......@@ -771,7 +771,7 @@ static int bcm_char_ioctl_gpio_multi_request(void __user *argp,
}
pgpio_multi_info[WIMAX_IDX].uiGPIOValue =
(*(UINT *)ucResetValue &
(*(UINT *)reset_val &
pgpio_multi_info[WIMAX_IDX].uiGPIOMask);
}
......@@ -793,7 +793,7 @@ static int bcm_char_ioctl_gpio_mode_request(void __user *argp,
struct bcm_gpio_multi_mode *pgpio_multi_mode =
(struct bcm_gpio_multi_mode *)gpio_multi_mode;
struct bcm_ioctl_buffer io_buff;
UCHAR ucResetValue[4];
UCHAR reset_val[4];
INT status;
int bytes;
......@@ -815,7 +815,7 @@ static int bcm_char_ioctl_gpio_mode_request(void __user *argp,
return -EFAULT;
bytes = rdmaltWithLock(ad, (UINT)GPIO_MODE_REGISTER,
(PUINT)ucResetValue, sizeof(UINT));
(PUINT)reset_val, sizeof(UINT));
if (bytes < 0) {
status = bytes;
......@@ -838,22 +838,22 @@ static int bcm_char_ioctl_gpio_mode_request(void __user *argp,
if (pgpio_multi_mode[WIMAX_IDX].uiGPIOMask) {
/* write all OUT's (1's) */
*(UINT *) ucResetValue |=
*(UINT *) reset_val |=
(pgpio_multi_mode[WIMAX_IDX].uiGPIOMode &
pgpio_multi_mode[WIMAX_IDX].uiGPIOMask);
/* write all IN's (0's) */
*(UINT *) ucResetValue &=
*(UINT *) reset_val &=
~((~pgpio_multi_mode[WIMAX_IDX].uiGPIOMode) &
pgpio_multi_mode[WIMAX_IDX].uiGPIOMask);
/* Currently implemented return the modes of all GPIO's
* else needs to bit AND with mask
*/
pgpio_multi_mode[WIMAX_IDX].uiGPIOMode = *(UINT *)ucResetValue;
pgpio_multi_mode[WIMAX_IDX].uiGPIOMode = *(UINT *)reset_val;
status = wrmaltWithLock(ad, GPIO_MODE_REGISTER,
(PUINT)ucResetValue, sizeof(ULONG));
(PUINT)reset_val, sizeof(ULONG));
if (status == STATUS_SUCCESS) {
BCM_DEBUG_PRINT(ad,
DBG_TYPE_OTHERS, OSAL_DBG, DBG_LVL_ALL,
......@@ -865,7 +865,7 @@ static int bcm_char_ioctl_gpio_mode_request(void __user *argp,
}
} else {
/* if uiGPIOMask is 0 then return mode register configuration */
pgpio_multi_mode[WIMAX_IDX].uiGPIOMode = *(UINT *)ucResetValue;
pgpio_multi_mode[WIMAX_IDX].uiGPIOMode = *(UINT *)reset_val;
}
status = copy_to_user(io_buff.OutputBuffer, &gpio_multi_mode,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment