Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (62 commits)
  [MIPS] PNX8550: Cleanup proc code.
  [MIPS] WRPPMC: Fix build.
  [MIPS] Yosemite: Fix modpost warnings.
  [MIPS] Change names of local variables to silence sparse
  [MIPS] SB1: Fix modpost warning.
  [MIPS] PNX: Fix modpost warnings.
  [MIPS] Alchemy: Fix modpost warnings.
  [MIPS] Non-FPAFF: Fix warning.
  [MIPS] DEC: Fix modpost warning.
  [MIPS] MIPSsim: Enable MIPSsim virtual network driver.
  [MIPS] Delete Ocelot 3 support.
  [MIPS] remove LASAT Networks platforms support
  [MIPS] Early check for SMTC kernel on non-MT processor
  [MIPS] Add debugfs files to show fpuemu statistics
  [MIPS] Add some debugfs files to debug unaligned accesses
  [MIPS] rbtx4938: Fix secondary PCIC and glue internal NICs
  [MIPS] tc35815: Load MAC address via platform_device
  [MIPS] Move FPU affinity code into separate file.
  [MIPS] Make ioremap() work on TX39/49 special unmapped segment
  [MIPS] rbtx4938: Update and minimize defconfig
  ...

arch/mips/Kconfig

@@ -15,6 +15,29 @@ choice
 	prompt "System type"
 	default SGI_IP22
 
+config LEMOTE_FULONG
+	bool "Lemote Fulong mini-PC"
+	select ARCH_SPARSEMEM_ENABLE
+	select SYS_HAS_CPU_LOONGSON2
+	select DMA_NONCOHERENT
+	select BOOT_ELF32
+	select BOARD_SCACHE
+	select HAVE_STD_PC_SERIAL_PORT
+	select HW_HAS_PCI
+	select I8259
+	select ISA
+	select IRQ_CPU
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_HAS_EARLY_PRINTK
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select CPU_HAS_WB
+	help
+	  Lemote Fulong mini-PC board based on the Chinese Loongson-2E CPU and
+	  an FPGA northbridge
+
 config MACH_ALCHEMY
 	bool "Alchemy processor based machines"
 
@@ -63,7 +86,7 @@ config MACH_DECSTATION
 	bool "DECstations"
 	select BOOT_ELF32
 	select DMA_NONCOHERENT
-	select SYS_HAS_EARLY_PRINTK
+	select NO_IOPORT
 	select IRQ_CPU
 	select SYS_HAS_CPU_R3000
 	select SYS_HAS_CPU_R4X00
@@ -88,24 +111,6 @@ config MACH_DECSTATION
 
 	  otherwise choose R3000.
 
-config MIPS_EV64120
-	bool "Galileo EV64120 Evaluation board (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select PCI_GT64XXX_PCI0
-	select SYS_HAS_CPU_R5000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_KGDB
-	help
-	  This is an evaluation board based on the Galileo GT-64120
-	  single-chip system controller that contains a MIPS R5000 compatible
-	  core running at 75/100MHz.  Their website is located at
-	  <http://www.marvell.com/>.  Say Y here if you wish to build a
-	  kernel for this platform.
-
 config MACH_JAZZ
 	bool "Jazz family of machines"
 	select ARC
@@ -126,20 +131,6 @@ config MACH_JAZZ
 	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
 	 Olivetti M700-10 workstations.
 
-config LASAT
-	bool "LASAT Networks platforms"
-	select DMA_NONCOHERENT
-	select SYS_HAS_EARLY_PRINTK
-	select HW_HAS_PCI
-	select PCI_GT64XXX_PCI0
-	select MIPS_NILE4
-	select R5000_CPU_SCACHE
-	select SYS_HAS_CPU_R5000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL if BROKEN
-	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-
 config MIPS_ATLAS
 	bool "MIPS Atlas board"
 	select BOOT_ELF32
@@ -173,7 +164,6 @@ config MIPS_MALTA
 	bool "MIPS Malta board"
 	select ARCH_MAY_HAVE_PC_FDC
 	select BOOT_ELF32
-	select HAVE_STD_PC_SERIAL_PORT
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
 	select IRQ_CPU
@@ -246,11 +236,13 @@ config MIPS_SIM
 	select DMA_NONCOHERENT
 	select SYS_HAS_EARLY_PRINTK
 	select IRQ_CPU
+	select BOOT_RAW
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_EARLY_PRINTK
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_MULTITHREADING
 	select SYS_SUPPORTS_LITTLE_ENDIAN
 	help
 	  This option enables support for MIPS Technologies MIPSsim software
@@ -274,43 +266,6 @@ config MOMENCO_OCELOT
 	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
 	  Momentum Computer <http://www.momenco.com/>.
 
-config MOMENCO_OCELOT_3
-	bool "Momentum Ocelot-3 board"
-	select BOOT_ELF32
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select IRQ_CPU_RM7K
-	select IRQ_MV64340
-	select PCI_MARVELL
-	select RM7000_CPU_SCACHE
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_RM9000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	help
-	  The Ocelot-3 is based off Discovery III System Controller and
-	  PMC-Sierra Rm79000 core.
-
-config MOMENCO_OCELOT_C
-	bool "Momentum Ocelot-C board"
-	select DMA_NONCOHERENT
-	select HW_HAS_PCI
-	select IRQ_CPU
-	select IRQ_MV64340
-	select PCI_MARVELL
-	select RM7000_CPU_SCACHE
-	select SWAP_IO_SPACE
-	select SYS_HAS_CPU_RM7000
-	select SYS_SUPPORTS_32BIT_KERNEL
-	select SYS_SUPPORTS_64BIT_KERNEL
-	select SYS_SUPPORTS_BIG_ENDIAN
-	select GENERIC_HARDIRQS_NO__DO_IRQ
-	help
-	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-	  Momentum Computer <http://www.momenco.com/>.
-
 config PNX8550_JBS
 	bool "Philips PNX8550 based JBS board"
 	select PNX8550
@@ -346,6 +301,27 @@ config MACH_VR41XX
 	select SYS_HAS_CPU_VR41XX
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 
+config PMC_MSP
+	bool "PMC-Sierra MSP chipsets"
+	depends on EXPERIMENTAL
+	select DMA_NONCOHERENT
+	select SWAP_IO_SPACE
+	select NO_EXCEPT_FILL
+	select BOOT_RAW
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_KGDB
+	select IRQ_CPU
+	select SERIAL_8250
+	select SERIAL_8250_CONSOLE
+	help
+	  This adds support for the PMC-Sierra family of Multi-Service
+	  Processor System-On-A-Chips.  These parts include a number
+	  of integrated peripherals, interfaces and DSPs in addition to
+	  a variety of MIPS cores.
+
 config PMC_YOSEMITE
 	bool "PMC-Sierra Yosemite eval board"
 	select DMA_COHERENT
@@ -450,8 +426,7 @@ config SGI_IP27
 	  here.
 
 config SGI_IP32
-	bool "SGI IP32 (O2) (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	bool "SGI IP32 (O2)"
 	select ARC
 	select ARC32
 	select BOOT_ELF32
@@ -652,6 +627,7 @@ config TOSHIBA_RBTX4938
 	select SYS_SUPPORTS_BIG_ENDIAN
 	select SYS_SUPPORTS_KGDB
 	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select GENERIC_GPIO
 	help
 	  This Toshiba board is based on the TX4938 processor. Say Y here to
 	  support this machine type
@@ -660,9 +636,7 @@ endchoice
 
 source "arch/mips/au1000/Kconfig"
 source "arch/mips/ddb5xxx/Kconfig"
-source "arch/mips/gt64120/ev64120/Kconfig"
 source "arch/mips/jazz/Kconfig"
-source "arch/mips/lasat/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
 source "arch/mips/sgi-ip27/Kconfig"
 source "arch/mips/sibyte/Kconfig"
@@ -721,6 +695,9 @@ config ARC
 config ARCH_MAY_HAVE_PC_FDC
 	bool
 
+config BOOT_RAW
+	bool
+
 config DMA_COHERENT
 	bool
 
@@ -768,16 +745,19 @@ config MIPS_BONITO64
 config MIPS_MSC
 	bool
 
-config MIPS_NILE4
-	bool
-
 config MIPS_DISABLE_OBSOLETE_IDE
 	bool
 
+config NO_IOPORT
+	def_bool n
+
 config GENERIC_ISA_DMA_SUPPORT_BROKEN
 	bool
 	select ZONE_DMA
 
+config GENERIC_GPIO
+	bool
+
 #
 # Endianess selection.  Sufficiently obscure so many users don't know what to
 # answer,so we try hard to limit the available choices.  Also the use of a
@@ -821,7 +801,10 @@ config IRQ_CPU_RM7K
 config IRQ_CPU_RM9K
 	bool
 
-config IRQ_MV64340
+config IRQ_MSP_SLP
+	bool
+
+config IRQ_MSP_CIC
 	bool
 
 config DDB5XXX_COMMON
@@ -834,6 +817,9 @@ config MIPS_BOARDS_GEN
 config PCI_GT64XXX_PCI0
 	bool
 
+config NO_EXCEPT_FILL
+	bool
+
 config MIPS_TX3927
 	bool
 	select HAS_TXX9_SERIAL
@@ -841,14 +827,6 @@ config MIPS_TX3927
 config MIPS_RM9122
 	bool
 	select SERIAL_RM9000
-	select GPI_RM9000
-	select WDT_RM9000
-
-config PCI_MARVELL
-	bool
-
-config SERIAL_RM9000
-	bool
 
 config PNX8550
 	bool
@@ -863,6 +841,7 @@ config SOC_PNX8550
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select GENERIC_HARDIRQS_NO__DO_IRQ
 	select SYS_SUPPORTS_KGDB
+	select GENERIC_GPIO
 
 config SWAP_IO_SPACE
 	bool
@@ -875,31 +854,17 @@ config EMMA2RH
 config SERIAL_RM9000
 	bool
 
-config GPI_RM9000
-	bool
-
-config WDT_RM9000
-	bool
-
 #
 # Unfortunately not all GT64120 systems run the chip at the same clock.
 # As the user for the clock rate and try to minimize the available options.
 #
 choice
 	prompt "Galileo Chip Clock"
-	#default SYSCLK_83 if MIPS_EV64120
-	depends on MIPS_EV64120 || MOMENCO_OCELOT
-	default SYSCLK_83 if MIPS_EV64120
+	depends on MOMENCO_OCELOT
 	default SYSCLK_100 if MOMENCO_OCELOT
 
-config SYSCLK_75
-	bool "75" if MIPS_EV64120
-
-config SYSCLK_83
-	bool "83.3" if MIPS_EV64120
-
 config SYSCLK_100
-	bool "100" if MIPS_EV64120 || MOMENCO_OCELOT
+	bool "100" if MOMENCO_OCELOT
 
 endchoice
 
@@ -911,8 +876,9 @@ config BOOT_ELF32
 
 config MIPS_L1_CACHE_SHIFT
 	int
-	default "4" if MACH_DECSTATION || SNI_RM
-	default "7" if SGI_IP27
+	default "4" if MACH_DECSTATION
+	default "7" if SGI_IP27 || SNI_RM
+	default "4" if PMC_MSP4200_EVAL
 	default "5"
 
 config HAVE_STD_PC_SERIAL_PORT
@@ -944,6 +910,16 @@ choice
 	prompt "CPU type"
 	default CPU_R4X00
 
+config CPU_LOONGSON2
+	bool "Loongson 2"
+	depends on SYS_HAS_CPU_LOONGSON2
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	help
+	  The Loongson 2E processor implements the MIPS III instruction set
+	  with many extensions.
+
 config CPU_MIPS32_R1
 	bool "MIPS32 Release 1"
 	depends on SYS_HAS_CPU_MIPS32_R1
@@ -1154,6 +1130,9 @@ config CPU_SB1
 
 endchoice
 
+config SYS_HAS_CPU_LOONGSON2
+	bool
+
 config SYS_HAS_CPU_MIPS32_R1
 	bool
 
@@ -1488,6 +1467,15 @@ config CPU_HAS_SMARTMIPS
 config CPU_HAS_WB
 	bool
 
+config 64BIT_CONTEXT
+	bool "Save 64bit integer registers"
+	depends on 32BIT && CPU_LOONGSON2
+	help
+	  Loongson2 CPU is 64bit , when used in 32BIT mode, its integer
+	  registers can still be accessed as 64bit, mainly for multimedia
+	  instructions. We must have all 64bit save/restored to make sure
+	  those instructions to get correct result.
+
 #
 # Vectored interrupt mode is an R2 feature
 #

arch/mips/Makefile

@@ -118,6 +118,7 @@ cflags-$(CONFIG_CPU_R4300)	+= -march=r4300 -Wa,--trap
 cflags-$(CONFIG_CPU_VR41XX)	+= -march=r4100 -Wa,--trap
 cflags-$(CONFIG_CPU_R4X00)	+= -march=r4600 -Wa,--trap
 cflags-$(CONFIG_CPU_TX49XX)	+= -march=r4600 -Wa,--trap
+cflags-$(CONFIG_CPU_LOONGSON2)	+= -march=r4600 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS32_R1)	+= $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
 			-Wa,-mips32 -Wa,--trap
 cflags-$(CONFIG_CPU_MIPS32_R2)	+= $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
@@ -282,14 +283,6 @@ libs-$(CONFIG_MACH_DECSTATION)	+= arch/mips/dec/prom/
 load-$(CONFIG_MACH_DECSTATION)	+= 0xffffffff80040000
 CLEAN_FILES			+= drivers/tc/lk201-map.c
 
-#
-# Galileo EV64120 Board
-#
-core-$(CONFIG_MIPS_EV64120)	+= arch/mips/gt64120/ev64120/
-core-$(CONFIG_MIPS_EV64120)	+= arch/mips/gt64120/common/
-cflags-$(CONFIG_MIPS_EV64120)	+= -Iinclude/asm-mips/mach-ev64120
-load-$(CONFIG_MIPS_EV64120)	+= 0xffffffff80100000
-
 #
 # Wind River PPMC Board (4KC + GT64120)
 #
@@ -297,6 +290,13 @@ core-$(CONFIG_WR_PPMC)		+= arch/mips/gt64120/wrppmc/
 cflags-$(CONFIG_WR_PPMC)		+= -Iinclude/asm-mips/mach-wrppmc
 load-$(CONFIG_WR_PPMC)		+= 0xffffffff80100000
 
+#
+# lemote fulong mini-PC board
+#
+core-$(CONFIG_LEMOTE_FULONG) +=arch/mips/lemote/lm2e/
+load-$(CONFIG_LEMOTE_FULONG) +=0xffffffff80100000
+cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote
+
 #
 # For all MIPS, Inc. eval boards
 #
@@ -327,7 +327,7 @@ load-$(CONFIG_MIPS_SEAD)	+= 0xffffffff80100000
 #
 # MIPS SIM
 #
-core-$(CONFIG_MIPS_SIM)		+= arch/mips/mips-boards/sim/
+core-$(CONFIG_MIPS_SIM)		+= arch/mips/mipssim/
 cflags-$(CONFIG_MIPS_SIM)	+= -Iinclude/asm-mips/mach-sim
 load-$(CONFIG_MIPS_SIM)		+= 0x80100000
 
@@ -343,12 +343,12 @@ cflags-$(CONFIG_MOMENCO_OCELOT)	+= -Iinclude/asm-mips/mach-ocelot
 load-$(CONFIG_MOMENCO_OCELOT)	+= 0xffffffff80100000
 
 #
-# Momentum Ocelot-C and -CS boards
+# PMC-Sierra MSP SOCs
 #
-# The Ocelot-C[S] setup.o must be linked early - it does the ioremap() for the
-# mips_io_port_base.
-core-$(CONFIG_MOMENCO_OCELOT_C)	+= arch/mips/momentum/ocelot_c/
-load-$(CONFIG_MOMENCO_OCELOT_C)	+= 0xffffffff80100000
+core-$(CONFIG_PMC_MSP)		+= arch/mips/pmc-sierra/msp71xx/
+cflags-$(CONFIG_PMC_MSP)	+= -Iinclude/asm-mips/pmc-sierra/msp71xx \
+					-mno-branch-likely
+load-$(CONFIG_PMC_MSP)		+= 0xffffffff80100000
 
 #
 # PMC-Sierra Yosemite
@@ -364,13 +364,6 @@ core-$(CONFIG_QEMU)		+= arch/mips/qemu/
 cflags-$(CONFIG_QEMU)		+= -Iinclude/asm-mips/mach-qemu
 load-$(CONFIG_QEMU)		+= 0xffffffff80010000
 
-#
-# Momentum Ocelot-3
-#
-core-$(CONFIG_MOMENCO_OCELOT_3) 	+= arch/mips/momentum/ocelot_3/
-cflags-$(CONFIG_MOMENCO_OCELOT_3)	+= -Iinclude/asm-mips/mach-ocelot3
-load-$(CONFIG_MOMENCO_OCELOT_3) 	+= 0xffffffff80100000
-
 #
 # Basler eXcite
 #
@@ -389,10 +382,6 @@ core-$(CONFIG_DDB5XXX_COMMON)	+= arch/mips/ddb5xxx/common/
 core-$(CONFIG_DDB5477)		+= arch/mips/ddb5xxx/ddb5477/
 load-$(CONFIG_DDB5477)		+= 0xffffffff80100000
 
-core-$(CONFIG_LASAT)		+= arch/mips/lasat/
-cflags-$(CONFIG_LASAT)		+= -Iinclude/asm-mips/mach-lasat
-load-$(CONFIG_LASAT)		+= 0xffffffff80000000
-
 #
 # Common VR41xx
 #
@@ -580,6 +569,7 @@ load-$(CONFIG_TOSHIBA_JMR3927)	+= 0xffffffff80050000
 #
 core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/toshiba_rbtx4927/
 core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/common/
+cflags-$(CONFIG_TOSHIBA_RBTX4927) += -Iinclude/asm-mips/mach-tx49xx
 load-$(CONFIG_TOSHIBA_RBTX4927)	+= 0xffffffff80020000
 
 #
@@ -587,6 +577,7 @@ load-$(CONFIG_TOSHIBA_RBTX4927)	+= 0xffffffff80020000
 #
 core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/
 core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/
+cflags-$(CONFIG_TOSHIBA_RBTX4938) += -Iinclude/asm-mips/mach-tx49xx
 load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
 
 cflags-y			+= -Iinclude/asm-mips/mach-generic
@@ -603,7 +594,8 @@ JIFFIES			= jiffies_64
 endif
 
 AFLAGS		+= $(cflags-y)
-CFLAGS		+= $(cflags-y)
+CFLAGS		+= $(cflags-y) \
+			-D"VMLINUX_LOAD_ADDRESS=$(load-y)"
 
 LDFLAGS			+= -m $(ld-emul)
 
@@ -633,18 +625,11 @@ CPPFLAGS_vmlinux.lds := \
 head-y := arch/mips/kernel/head.o arch/mips/kernel/init_task.o
 
 libs-y			+= arch/mips/lib/
-libs-$(CONFIG_32BIT)	+= arch/mips/lib-32/
-libs-$(CONFIG_64BIT)	+= arch/mips/lib-64/
 
 core-y			+= arch/mips/kernel/ arch/mips/mm/ arch/mips/math-emu/
 
 drivers-$(CONFIG_OPROFILE)	+= arch/mips/oprofile/
 
-ifdef CONFIG_LASAT
-rom.bin rom.sw: vmlinux
-	$(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
-endif
-
 #
 # Some machines like the Indy need 32-bit ELF binaries for booting purposes.
 # Other need ECOFF, so we build a 32-bit ELF binary for them which we then
@@ -702,32 +687,19 @@ vmlinux.srec: $(vmlinux-32)
 CLEAN_FILES += vmlinux.ecoff \
 	       vmlinux.srec
 
+archprepare:
+ifdef CONFIG_MIPS32_N32
+	@echo '  Checking missing-syscalls for N32'
+	$(Q)$(MAKE) $(build)=. missing-syscalls EXTRA_CFLAGS="-mabi=n32"
+endif
+ifdef CONFIG_MIPS32_O32
+	@echo '  Checking missing-syscalls for O32'
+	$(Q)$(MAKE) $(build)=. missing-syscalls EXTRA_CFLAGS="-mabi=32"
+endif
+
 archclean:
 	@$(MAKE) $(clean)=arch/mips/boot
-	@$(MAKE) $(clean)=arch/mips/lasat
 
 CLEAN_FILES += vmlinux.32 \
 	       vmlinux.64 \
 	       vmlinux.ecoff
-
-quiet_cmd_syscalls_n32 = CALL-N32 $<
-      cmd_syscalls_n32 = $(CONFIG_SHELL) $< $(CC) $(c_flags) -mabi=n32
-
-quiet_cmd_syscalls_o32 = CALL-O32 $<
-      cmd_syscalls_o32 = $(CONFIG_SHELL) $< $(CC) $(c_flags) -mabi=32
-
-PHONY += missing-syscalls-n32 missing-syscalls-o32
-
-missing-syscalls-n32: scripts/checksyscalls.sh FORCE
-	$(call cmd,syscalls_n32)
-
-missing-syscalls-o32: scripts/checksyscalls.sh FORCE
-	$(call cmd,syscalls_o32)
-
-archprepare:
-ifdef CONFIG_MIPS32_N32
-	$(Q)$(MAKE) $(build)=arch/mips missing-syscalls-n32
-endif
-ifdef CONFIG_MIPS32_O32
-	$(Q)$(MAKE) $(build)=arch/mips missing-syscalls-o32
-endif

arch/mips/au1000/common/gpio.c

 /*
+ *  Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ *  	Architecture specific GPIO support
+ *
  *  This program is free software; you can redistribute	 it and/or modify it
  *  under  the terms of	 the GNU General  Public License as published by the
  *  Free Software Foundation;  either version 2 of the	License, or (at your
@@ -18,101 +21,136 @@
  *  You should have received a copy of the  GNU General Public License along
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *  Notes :
+ * 	au1000 SoC have only one GPIO line : GPIO1
+ * 	others have a second one : GPIO2
  */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/types.h>
 #include <linux/module.h>
-#include <au1000.h>
-#include <au1xxx_gpio.h>
+
+#include <asm/addrspace.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/gpio.h>
 
 #define gpio1 sys
 #if !defined(CONFIG_SOC_AU1000)
-static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE;
 
-#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
+static struct au1x00_gpio2 *const gpio2 = (struct au1x00_gpio2 *) GPIO2_BASE;
+#define GPIO2_OUTPUT_ENABLE_MASK 	0x00010000
 
-int au1xxx_gpio2_read(int signal)
+static int au1xxx_gpio2_read(unsigned gpio)
 {
-	signal -= 200;
-/*	gpio2->dir &= ~(0x01 << signal);						//Set GPIO to input */
-	return ((gpio2->pinstate >> signal) & 0x01);
+	gpio -= AU1XXX_GPIO_BASE;
+	return ((gpio2->pinstate >> gpio) & 0x01);
 }
 
-void au1xxx_gpio2_write(int signal, int value)
+static void au1xxx_gpio2_write(unsigned gpio, int value)
 {
-	signal -= 200;
+	gpio -= AU1XXX_GPIO_BASE;
 
-	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) |
-		(value << signal);
+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << gpio) | (value << gpio);
 }
 
-void au1xxx_gpio2_tristate(int signal)
+static int au1xxx_gpio2_direction_input(unsigned gpio)
 {
-	signal -= 200;
-	gpio2->dir &= ~(0x01 << signal); 	/* Set GPIO to input */
+	gpio -= AU1XXX_GPIO_BASE;
+	gpio2->dir &= ~(0x01 << gpio);
+	return 0;
 }
-#endif
 
-int au1xxx_gpio1_read(int signal)
+static int au1xxx_gpio2_direction_output(unsigned gpio, int value)
+{
+	gpio -= AU1XXX_GPIO_BASE;
+	gpio2->dir = (0x01 << gpio) | (value << gpio);
+	return 0;
+}
+
+#endif /* !defined(CONFIG_SOC_AU1000) */
+
+static int au1xxx_gpio1_read(unsigned gpio)
 {
-/*	gpio1->trioutclr |= (0x01 << signal); */
-	return ((gpio1->pinstaterd >> signal) & 0x01);
+	return ((gpio1->pinstaterd >> gpio) & 0x01);
 }
 
-void au1xxx_gpio1_write(int signal, int value)
+static void au1xxx_gpio1_write(unsigned gpio, int value)
 {
-	if(value)
-		gpio1->outputset = (0x01 << signal);
+	if (value)
+		gpio1->outputset = (0x01 << gpio);
 	else
-		gpio1->outputclr = (0x01 << signal);	/* Output a Zero */
+		/* Output a zero */
+		gpio1->outputclr = (0x01 << gpio);
 }
 
-void au1xxx_gpio1_tristate(int signal)
+static int au1xxx_gpio1_direction_input(unsigned gpio)
 {
-	gpio1->trioutclr = (0x01 << signal);		/* Tristate signal */
+	gpio1->pininputen = (0x01 << gpio);
+	return 0;
 }
 
+static int au1xxx_gpio1_direction_output(unsigned gpio, int value)
+{
+	gpio1->trioutclr = (0x01 & gpio);
+	return 0;
+}
 
-int au1xxx_gpio_read(int signal)
+int au1xxx_gpio_get_value(unsigned gpio)
 {
-	if(signal >= 200)
+	if (gpio >= AU1XXX_GPIO_BASE)
 #if defined(CONFIG_SOC_AU1000)
 		return 0;
 #else
-		return au1xxx_gpio2_read(signal);
+		return au1xxx_gpio2_read(gpio);
 #endif
 	else
-		return au1xxx_gpio1_read(signal);
+		return au1xxx_gpio1_read(gpio);
 }
 
-void au1xxx_gpio_write(int signal, int value)
+EXPORT_SYMBOL(au1xxx_gpio_get_value);
+
+void au1xxx_gpio_set_value(unsigned gpio, int value)
 {
-	if(signal >= 200)
+	if (gpio >= AU1XXX_GPIO_BASE)
 #if defined(CONFIG_SOC_AU1000)
 		;
 #else
-		au1xxx_gpio2_write(signal, value);
+		au1xxx_gpio2_write(gpio, value);
 #endif
 	else
-		au1xxx_gpio1_write(signal, value);
+		au1xxx_gpio1_write(gpio, value);
 }
 
-void au1xxx_gpio_tristate(int signal)
+EXPORT_SYMBOL(au1xxx_gpio_set_value);
+
+int au1xxx_gpio_direction_input(unsigned gpio)
 {
-	if(signal >= 200)
+	if (gpio >= AU1XXX_GPIO_BASE)
 #if defined(CONFIG_SOC_AU1000)
 		;
 #else
-		au1xxx_gpio2_tristate(signal);
+		return au1xxx_gpio2_direction_input(gpio);
 #endif
 	else
-		au1xxx_gpio1_tristate(signal);
+		return au1xxx_gpio1_direction_input(gpio);
 }
 
-void au1xxx_gpio1_set_inputs(void)
+EXPORT_SYMBOL(au1xxx_gpio_direction_input);
+
+int au1xxx_gpio_direction_output(unsigned gpio, int value)
 {
-	gpio1->pininputen = 0;
+	if (gpio >= AU1XXX_GPIO_BASE)
+#if defined(CONFIG_SOC_AU1000)
+		;
+#else
+		return au1xxx_gpio2_direction_output(gpio, value);
+#endif
+	else
+		return au1xxx_gpio1_direction_output(gpio, value);
 }
 
-EXPORT_SYMBOL(au1xxx_gpio1_set_inputs);
-EXPORT_SYMBOL(au1xxx_gpio_tristate);
-EXPORT_SYMBOL(au1xxx_gpio_write);
-EXPORT_SYMBOL(au1xxx_gpio_read);
+EXPORT_SYMBOL(au1xxx_gpio_direction_output);

arch/mips/au1000/common/platform.c

@@ -289,7 +289,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 #endif
 };
 
-int au1xxx_platform_init(void)
+int __init au1xxx_platform_init(void)
 {
 	return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices));
 }

arch/mips/configs/atlas_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 CONFIG_MIPS_ATLAS=y
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_MIPS_ATLAS=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/bigsur_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/capcella_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/db1000_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_DB1000=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/db1100_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_DB1100=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/db1200_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_DB1200=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/db1500_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_DB1500=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/db1550_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_DB1550=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/ddb5477_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/decstation_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 CONFIG_MACH_DECSTATION=y
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_MACH_DECSTATION=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/e55_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/emma2rh_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/excite_defconfig

@@ -26,9 +26,7 @@ CONFIG_BASLER_EXCITE=y
 # CONFIG_BASLER_EXCITE_PROTOTYPE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_BASLER_EXCITE=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/ip22_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/ip27_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/ip32_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/jazz_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 CONFIG_MACH_JAZZ=y
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_MACH_JAZZ=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/jmr3927_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/malta_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 CONFIG_MIPS_MALTA=y
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_MIPS_MALTA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/mipssim_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 CONFIG_MIPS_SIM=y
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
@@ -496,36 +492,23 @@ CONFIG_NETDEVICES=y
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# PHY device support
-#
+# CONFIG_PHYLIB is not set
 
 #
 # Ethernet (10 or 100Mbit)
 #
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+CONFIG_MIPS_SIM_NET=y
+# CONFIG_DM9000 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 
 #
-# Wan interfaces
+# Wireless LAN
 #
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
 # CONFIG_WAN is not set
 # CONFIG_PPP is not set
 # CONFIG_SLIP is not set

arch/mips/configs/mpc30x_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/ocelot_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 CONFIG_MOMENCO_OCELOT=y
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/pb1100_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_PB1100=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/pb1500_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_PB1500=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/pb1550_defconfig

@@ -26,9 +26,7 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -36,8 +34,6 @@ CONFIG_MIPS_PB1550=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/pnx8550-jbs_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 CONFIG_PNX8550_JBS=y

arch/mips/configs/pnx8550-stb810_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/qemu_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/rbhma4200_defconfig

@@ -24,17 +24,13 @@ CONFIG_MIPS=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
 # CONFIG_WR_PPMC is not set
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set

arch/mips/configs/rm200_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/sb1250-swarm_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/sead_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 CONFIG_MIPS_SEAD=y
@@ -35,8 +33,6 @@ CONFIG_MIPS_SEAD=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/tb0219_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/tb0226_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/tb0287_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/workpad_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/wrppmc_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_WR_PPMC=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/configs/yosemite_defconfig

@@ -25,9 +25,7 @@ CONFIG_ZONE_DMA=y
 # CONFIG_BASLER_EXCITE is not set
 # CONFIG_MIPS_COBALT is not set
 # CONFIG_MACH_DECSTATION is not set
-# CONFIG_MIPS_EV64120 is not set
 # CONFIG_MACH_JAZZ is not set
-# CONFIG_LASAT is not set
 # CONFIG_MIPS_ATLAS is not set
 # CONFIG_MIPS_MALTA is not set
 # CONFIG_MIPS_SEAD is not set
@@ -35,8 +33,6 @@ CONFIG_ZONE_DMA=y
 # CONFIG_MIPS_SIM is not set
 # CONFIG_MOMENCO_JAGUAR_ATX is not set
 # CONFIG_MOMENCO_OCELOT is not set
-# CONFIG_MOMENCO_OCELOT_3 is not set
-# CONFIG_MOMENCO_OCELOT_C is not set
 # CONFIG_MOMENCO_OCELOT_G is not set
 # CONFIG_MIPS_XXS1500 is not set
 # CONFIG_PNX8550_JBS is not set

arch/mips/ddb5xxx/ddb5477/Makefile

@@ -2,7 +2,8 @@
 # Makefile for NEC DDB-Vrc5477 board
 #
 
-obj-y	 		+= irq.o irq_5477.o setup.o lcd44780.o
+obj-y	 		+= ddb5477-platform.o irq.o irq_5477.o setup.o \
+			   lcd44780.o
 
 obj-$(CONFIG_RUNTIME_DEBUG) 	+= debug.o
 obj-$(CONFIG_KGDB)		+= kgdb_io.o