drm/i915: Flush pending interrupt following a GPU reset

After resetting the GPU (or subset of engines), call synchronize_irq()
to flush any pending irq before proceeding with the cleanup. For a
device level reset, we disable the interupts around the reset, but when
resetting just one engine, we have to avoid such global disabling. This
leaves us open to an interrupt arriving for the engine as we try to
reset it. We already do try to flush the IIR following the reset, but we
have to ensure that the in-flight interrupt does not land after we start
cleaning up after the reset; enter synchronize_irq().

As it current stands, we very rarely, but fatally, see sequences such as:

    2.... 57964564us : execlists_reset_prepare: rcs0
    2.... 57964613us : execlists_reset: rcs0 seqno=424
    0d.h1 57964615us : gen8_cs_irq_handler: rcs0 CS active=1
    2d..1 57964617us : __i915_request_unsubmit: rcs0 fence 29:1056 <- global_seqno 1060
    2.... 57964703us : execlists_reset_finish: rcs0
    0..s. 57964705us : execlists_submission_tasklet: rcs0 awake?=1, active=0, irq-posted?=1

v2: Move the sync into the execlists reset handler so that we coordinate
the flush with disabling the interrupt handling and canceling the
pending interrupt.
v3: Just use synchronize_hardirq() to avoid the might_sleep(), we do not
yet have threaded-irq to worry about.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Jeff McGee <jeff.mcgee@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180322073533.5313-4-chris@chris-wilson.co.ukReviewed-by: Jeff McGee <jeff.mcgee@intel.com>

drivers/gpu/drm/i915/intel_lrc.c

@@ -805,6 +805,10 @@ static void execlists_cancel_requests(struct intel_engine_cs *engine)
 
 	spin_unlock(&engine->timeline->lock);
 
+	/* Mark all CS interrupts as complete */
+	smp_store_mb(execlists->active, 0);
+	synchronize_hardirq(engine->i915->drm.irq);
+
 	/*
 	 * The port is checked prior to scheduling a tasklet, but
 	 * just in case we have suspended the tasklet to do the
@@ -813,9 +817,6 @@ static void execlists_cancel_requests(struct intel_engine_cs *engine)
 	 */
 	clear_bit(ENGINE_IRQ_EXECLIST, &engine->irq_posted);
 
-	/* Mark all CS interrupts as complete */
-	execlists->active = 0;
-
 	local_irq_restore(flags);
 }
 

drivers/gpu/drm/i915/intel_uncore.c

@@ -2116,8 +2116,10 @@ int intel_gpu_reset(struct drm_i915_private *dev_priv, unsigned engine_mask)
 		i915_stop_engines(dev_priv, engine_mask);
 
 		ret = -ENODEV;
-		if (reset)
+		if (reset) {
+			GEM_TRACE("engine_mask=%x\n", engine_mask);
 			ret = reset(dev_priv, engine_mask);
+		}
 		if (ret != -ETIMEDOUT)
 			break;