Merge tag 'amlogic-dt64' of...

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt64

Amlogic 64-bit DT changes for v4.13
- cleanup/reorganize alphabetically to better avoid conflicts
- add HDMI and CVBS nodes for multiple boards
- new pinctrl pins: SPI, HDMI CEC
- SCPI: fix thermal sensor reporting

New board support
- NanoPi K2 (GXBB)
- R-Box Pro (GXM)

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (36 commits)
  ARM64: dts: meson-gxl-s905x-p212: Add HDMI and CVBS nodes
  ARM64: dts: meson-gxl-s905x-khadas-vim: Add HDMI nodes
  ARM64: dts: meson-gxl-s905d-p230: Add HDMI nodes
  ARM64: dts: meson-gxbb-wetek-play2: Add HDMI and CVBS Nodes
  ARM64: dts: meson-gx: Fix sensors reporting from SCP
  ARM64: dts: meson-gxl: Add SPI pinctrl nodes
  ARM64: dts: meson-gxbb: Add SPI pinctrl nodes
  ARM64: dts: meson-gxl: Add Ethernet PHY LEDS pins nodes
  ARM64: dts: meson-gxl: Add CEC pins nodes
  ARM64: dts: meson-gxbb: Add CEC pins nodes
  ARM64: dts: Fix GXBB periphs pinctrl pull-enable register base
  ARM64: dts: Fix GXL periphs pinctrl pull-enable register base
  ARM64: dts: meson-gxl: Fix pinctrl periphs gpio-ranges
  arm64: dts: amlogic: Add NanoPi K2
  dt-bindings: arm: amlogic: Add NanoPi K2
  arm64: dts: meson-gxm: Add R-Box Pro
  dt-bindings: arm: amlogic: Add R-Box Pro
  dt-bindings: Add Kingnovel vendor prefix
  arm64: dts: meson-gx-p23x-q20x: Fix node order
  arm64: dts: meson-gxm-nexbox-a1: Fix node order
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/amlogic.txt

@@ -29,26 +29,34 @@ Boards with the Amlogic Meson GXM S912 SoC shall have the following properties:
   Required root node property:
     compatible: "amlogic,s912", "amlogic,meson-gxm";
 
-Board compatible values:
+Board compatible values (alphabetically, grouped by SoC):
+
   - "geniatech,atv1200" (Meson6)
+
   - "minix,neo-x8" (Meson8)
-  - "tronfy,mxq" (Meson8b)
+
   - "hardkernel,odroid-c1" (Meson8b)
+  - "tronfy,mxq" (Meson8b)
+
+  - "amlogic,p200" (Meson gxbb)
+  - "amlogic,p201" (Meson gxbb)
+  - "friendlyarm,nanopi-k2" (Meson gxbb)
+  - "hardkernel,odroid-c2" (Meson gxbb)
+  - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
   - "tronsmart,vega-s95-pro", "tronsmart,vega-s95" (Meson gxbb)
   - "tronsmart,vega-s95-meta", "tronsmart,vega-s95" (Meson gxbb)
   - "tronsmart,vega-s95-telos", "tronsmart,vega-s95" (Meson gxbb)
-  - "hardkernel,odroid-c2" (Meson gxbb)
-  - "amlogic,p200" (Meson gxbb)
-  - "amlogic,p201" (Meson gxbb)
   - "wetek,hub" (Meson gxbb)
   - "wetek,play2" (Meson gxbb)
+
   - "amlogic,p212" (Meson gxl s905x)
+  - "hwacom,amazetv" (Meson gxl s905x)
   - "khadas,vim" (Meson gxl s905x)
 
   - "amlogic,p230" (Meson gxl s905d)
   - "amlogic,p231" (Meson gxl s905d)
-  - "hwacom,amazetv" (Meson gxl s905x)
+
   - "amlogic,q200" (Meson gxm s912)
   - "amlogic,q201" (Meson gxm s912)
-  - "nexbox,a95x" (Meson gxbb or Meson gxl s905x)
+  - "kingnovel,r-box-pro" (Meson gxm S912)
   - "nexbox,a1" (Meson gxm s912)

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -165,6 +165,7 @@ keithkoep	Keith & Koep GmbH
 keymile	Keymile GmbH
 khadas	Khadas
 kinetic Kinetic Technologies
+kingnovel	Kingnovel Technology Co., Ltd.
 kosagi	Sutajio Ko-Usagi PTE Ltd.
 kyo	Kyocera Corporation
 lacie	LaCie

arch/arm64/boot/dts/amlogic/Makefile

+dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-p200.dtb
@@ -7,15 +8,16 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb
 dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb
-dtb-$(CONFIG_ARCH_MESON) += meson-gxm-nexbox-a1.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-gxm-rbox-pro.dtb
 
 always		:= $(dtb-y)
 subdir-y	:= $(dts-dirs)

arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi

@@ -121,19 +121,42 @@ hdmi_connector_in: endpoint {
 	};
 };
 
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
 	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
 };
 
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
 };
 
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
@@ -154,7 +177,7 @@ &sd_emmc_a {
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
@@ -198,32 +221,9 @@ &sd_emmc_c {
 	vqmmc-supply = <&vddio_boot>;
 };
 
-&pwm_ef {
-	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-};
-
-&ethmac {
-	status = "okay";
-};
-
-&cvbs_vdac_port {
-	cvbs_vdac_out: endpoint {
-		remote-endpoint = <&cvbs_connector_in>;
-	};
-};
-
-&hdmi_tx {
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
 	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};

arch/arm64/boot/dts/amlogic/meson-gx.dtsi

@@ -200,7 +200,7 @@ scpi_dvfs: scpi_clocks@0 {
 		};
 
 		scpi_sensors: sensors {
-			compatible = "arm,scpi-sensors";
+			compatible = "amlogic,meson-gxbb-scpi-sensors", "arm,scpi-sensors";
 			#thermal-sensor-cells = <1>;
 		};
 	};

arch/arm64/boot/dts/amlogic/meson-gxbb-nanopi-k2.dts

+/*
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "meson-gxbb.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "friendlyarm,nanopi-k2", "amlogic,meson-gxbb";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		stat {
+			label = "nanopi-k2:blue:stat";
+			gpios = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	vdd_5v: regulator-vdd-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vddio_ao18: regulator-vddio-ao18 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO18";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddio_ao3v3: regulator-vddio-ao3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_AO3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vddio_tf: regulator-vddio-tf {
+		compatible = "regulator-gpio";
+
+		regulator-name = "VDDIO_TF";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+
+		states = <3300000 0>,
+		         <1800000 1>;
+	};
+
+	wifi_32k: wifi-32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi_32k>;
+		clock-names = "ext_clock";
+	};
+
+	vcc1v8: regulator-vcc1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vcc3v3: regulator-vcc3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&ethmac {
+	status = "okay";
+	pinctrl-0 = <&eth_rgmii_pins>;
+	pinctrl-names = "default";
+
+	phy-handle = <&eth_phy0>;
+	phy-mode = "rgmii";
+
+	amlogic,tx-delay-ns = <2>;
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy0: ethernet-phy@0 {
+			/* Realtek RTL8211F (0x001cc916) */
+			reg = <0>;
+		};
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+&saradc {
+	status = "okay";
+	vref-supply = <&vddio_ao18>;
+};
+
+/* SDIO */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>, <&sdio_irq_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_ao18>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+/* SD */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vddio_ao3v3>;
+	vqmmc-supply = <&vddio_tf>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "disabled";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc3v3>;
+	vqmmc-supply = <&vcc1v8>;
+};
+
+/* DBG_UART */
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+/* Bluetooth on AP6212 */
+&uart_A {
+	status = "disabled";
+	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+	pinctrl-names = "default";
+};
+
+/* 40-pin CON1 */
+&uart_C {
+	status = "disabled";
+	pinctrl-0 = <&uart_c_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&vdd_5v>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts

@@ -165,10 +165,10 @@ hdmi_connector_in: endpoint {
 	};
 };
 
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
 };
 
 &ethmac {
@@ -195,12 +195,32 @@ eth_phy0: ethernet-phy@0 {
 	};
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
 };
 
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
@@ -260,28 +280,8 @@ &sd_emmc_c {
 	vqmmc-supply = <&vddio_boot>;
 };
 
-&pwm_ef {
-	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-};
-
-&cvbs_vdac_port {
-	cvbs_vdac_out: endpoint {
-		remote-endpoint = <&cvbs_connector_in>;
-	};
-};
-
-&hdmi_tx {
+&uart_AO {
 	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};

arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts

@@ -137,16 +137,6 @@ emmc_pwrseq: emmc-pwrseq {
 	};
 };
 
-&scpi_clocks {
-	status = "disabled";
-};
-
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
 &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_rgmii_pins>;
@@ -172,6 +162,33 @@ eth_phy0: ethernet-phy@0 {
 	};
 };
 
+&gpio_ao {
+	/*
+	 * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
+	 * to be turned high in order to be detected by the USB Controller
+	 * This signal should be handled by a USB specific power sequence
+	 * in order to reset the Hub when USB bus is powered down.
+	 */
+	usb-hub {
+		gpio-hog;
+		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb-hub-reset";
+	};
+};
+
+&i2c_A {
+	status = "okay";
+	pinctrl-0 = <&i2c_a_pins>;
+	pinctrl-names = "default";
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
 &pinctrl_aobus {
 	gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En",
 			  "USB HUB nRESET", "USB OTG Power En",
@@ -223,55 +240,15 @@ &pinctrl_periphs {
 			  "";
 };
 
-&ir {
-	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-};
-
-&i2c_A {
-	status = "okay";
-	pinctrl-0 = <&i2c_a_pins>;
-	pinctrl-names = "default";
-};
-
-&gpio_ao {
-	/*
-	 * WARNING: The USB Hub on the Odroid-C2 needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	usb-hub {
-		gpio-hog;
-		gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
-};
-
-&usb0_phy {
-	status = "okay";
-	phy-supply = <&usb_otg_pwr>;
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
 &saradc {
 	status = "okay";
 	vref-supply = <&vcc1v8>;
 };
 
+&scpi_clocks {
+	status = "disabled";
+};
+
 /* SD */
 &sd_emmc_b {
 	status = "okay";
@@ -309,3 +286,26 @@ &sd_emmc_c {
 	vmmc-supply = <&vcc3v3>;
 	vqmmc-supply = <&vcc1v8>;
 };
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_otg_pwr>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
+};

arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi

@@ -126,7 +126,7 @@ sdio_pwrseq: sdio-pwrseq {
 		clock-names = "ext_clock";
 	};
 
-	cvbs-connector {
+	cvbs_connector: cvbs-connector {
 		compatible = "composite-video-connector";
 
 		port {
@@ -148,34 +148,36 @@ hdmi_connector_in: endpoint {
 	};
 };
 
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
 };
 
-&ir {
+&hdmi_tx {
 	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
 	pinctrl-names = "default";
 };
 
-&usb0_phy {
-	status = "okay";
-	phy-supply = <&usb_pwr>;
-};
-
-&usb1_phy {
-	status = "okay";
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
 };
 
-&usb0 {
+&ir {
 	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
 };
 
-&usb1 {
+&pwm_ef {
 	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
@@ -198,7 +200,7 @@ &sd_emmc_a {
 	vmmc-supply = <&vddao_3v3>;
 	vqmmc-supply = <&vddio_boot>;
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
@@ -242,28 +244,26 @@ &sd_emmc_c {
 	vqmmc-supply = <&vddio_boot>;
 };
 
-&pwm_ef {
+/* This UART is brought out to the DB9 connector */
+&uart_AO {
 	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
 };
 
-&cvbs_vdac_port {
-	cvbs_vdac_out: endpoint {
-		remote-endpoint = <&cvbs_connector_in>;
-	};
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_pwr>;
 };
 
-&hdmi_tx {
+&usb1_phy {
 	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
-	pinctrl-names = "default";
 };
 
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
 };

arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi

@@ -111,18 +111,6 @@ sdio_pwrseq: sdio-pwrseq {
 	};
 };
 
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
-};
-
-&ir {
-	status = "okay";
-	pinctrl-0 = <&remote_input_ao_pins>;
-	pinctrl-names = "default";
-};
-
 &ethmac {
 	status = "okay";
 	pinctrl-0 = <&eth_rgmii_pins>;
@@ -149,21 +137,18 @@ eth_phy0: ethernet-phy@0 {
 	};
 };
 
-&usb0_phy {
-	status = "okay";
-	phy-supply = <&usb_vbus>;
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
+&ir {
 	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
 };
 
-&usb1 {
+&pwm_ef {
 	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
 };
 
 /* Wireless SDIO Module */
@@ -186,7 +171,7 @@ &sd_emmc_a {
 	vmmc-supply = <&vcc_3v3>;
 	vqmmc-supply = <&vcc_1v8>;
 
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};
@@ -229,10 +214,25 @@ &sd_emmc_c {
 	vmmcq-sumpply = <&vcc_1v8>;
 };
 
-&pwm_ef {
+&uart_AO {
 	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
+};
+
+&usb0_phy {
+	status = "okay";
+	phy-supply = <&usb_vbus>;
+};
+
+&usb1_phy {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb1 {
+	status = "okay";
 };

arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts

@@ -59,10 +59,10 @@ system {
 			panic-indicator;
 		};
 	};
+};
 
-	cvbs-connector {
-		status = "disabled";
-	};
+&cvbs_connector {
+	status = "disabled";
 };
 
 &ethmac {

arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts

@@ -85,6 +85,34 @@ button@0 {
 			gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	cvbs-connector {
+		compatible = "composite-video-connector";
+
+		port {
+			cvbs_connector_in: endpoint {
+				remote-endpoint = <&cvbs_vdac_out>;
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
 };
 
 &ethmac {
@@ -113,6 +141,18 @@ eth_phy0: ethernet-phy@0 {
 	};
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &i2c_A {
 	status = "okay";
 	pinctrl-0 = <&i2c_a_pins>;

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -97,13 +97,6 @@ usb1: usb@c9100000 {
 	};
 };
 
-&ethmac {
-	clocks = <&clkc CLKID_ETH>,
-		 <&clkc CLKID_FCLK_DIV2>,
-		 <&clkc CLKID_MPLL2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1";
-};
-
 &aobus {
 	pinctrl_aobus: pinctrl@14 {
 		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
@@ -249,9 +242,119 @@ mux {
 				function = "spdif_out_ao";
 			};
 		};
+
+		ao_cec_pins: ao_cec {
+			mux {
+				groups = "ao_cec";
+				function = "cec_ao";
+			};
+		};
+
+		ee_cec_pins: ee_cec {
+			mux {
+				groups = "ee_cec";
+				function = "cec_ao";
+			};
+		};
 	};
 };
 
+&apb {
+	mali: gpu@c0000 {
+		compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
+		reg = <0x0 0xc0000 0x0 0x40000>;
+		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "gp", "gpmmu", "pp", "pmu",
+			"pp0", "ppmmu0", "pp1", "ppmmu1",
+			"pp2", "ppmmu2";
+		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
+		clock-names = "bus", "core";
+
+		/*
+		 * Mali clocking is provided by two identical clock paths
+		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
+		 * free mux to safely change frequency while running.
+		 */
+		assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
+				  <&clkc CLKID_MALI_0>,
+				  <&clkc CLKID_MALI>; /* Glitch free mux */
+		assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
+					 <0>, /* Do Nothing */
+					 <&clkc CLKID_MALI_0>;
+		assigned-clock-rates = <0>, /* Do Nothing */
+				       <666666666>,
+				       <0>; /* Do Nothing */
+	};
+};
+
+&cbus {
+	spifc: spi@8c80 {
+		compatible = "amlogic,meson-gxbb-spifc";
+		reg = <0x0 0x08c80 0x0 0x80>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkc CLKID_SPI>;
+		status = "disabled";
+	};
+};
+
+&ethmac {
+	clocks = <&clkc CLKID_ETH>,
+		 <&clkc CLKID_FCLK_DIV2>,
+		 <&clkc CLKID_MPLL2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1";
+};
+
+&hdmi_tx {
+	compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+	resets = <&reset RESET_HDMITX_CAPB3>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_HDMI_TX>;
+	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+	clock-names = "isfr", "iahb", "venci";
+};
+
+&hiubus {
+	clkc: clock-controller@0 {
+		compatible = "amlogic,gxbb-clkc";
+		#clock-cells = <1>;
+		reg = <0x0 0x0 0x0 0x3db>;
+	};
+};
+
+&hwrng {
+	clocks = <&clkc CLKID_RNG0>;
+	clock-names = "core";
+};
+
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
+
 &periphs {
 	pinctrl_periphs: pinctrl@4b0 {
 		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
@@ -262,7 +365,7 @@ pinctrl_periphs: pinctrl@4b0 {
 		gpio: bank@4b0 {
 			reg = <0x0 0x004b0 0x0 0x28>,
 			      <0x0 0x004e8 0x0 0x14>,
-			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
 			      <0x0 0x00430 0x0 0x40>;
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
@@ -290,6 +393,22 @@ mux {
 			};
 		};
 
+		spi_pins: spi {
+			mux {
+				groups = "spi_miso",
+					"spi_mosi",
+					"spi_sclk";
+				function = "spi";
+			};
+		};
+
+		spi_ss0_pins: spi-ss0 {
+			mux {
+				groups = "spi_ss0";
+				function = "spi";
+			};
+		};
+
 		sdcard_pins: sdcard {
 			mux {
 				groups = "sdcard_d0",
@@ -521,67 +640,6 @@ mux {
 	};
 };
 
-&hiubus {
-	clkc: clock-controller@0 {
-		compatible = "amlogic,gxbb-clkc";
-		#clock-cells = <1>;
-		reg = <0x0 0x0 0x0 0x3db>;
-	};
-};
-
-&apb {
-	mali: gpu@c0000 {
-		compatible = "amlogic,meson-gxbb-mali", "arm,mali-450";
-		reg = <0x0 0xc0000 0x0 0x40000>;
-		interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "gp", "gpmmu", "pp", "pmu",
-			"pp0", "ppmmu0", "pp1", "ppmmu1",
-			"pp2", "ppmmu2";
-		clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
-		clock-names = "bus", "core";
-
-		/*
-		 * Mali clocking is provided by two identical clock paths
-		 * MALI_0 and MALI_1 muxed to a single clock by a glitch
-		 * free mux to safely change frequency while running.
-		 */
-		assigned-clocks = <&clkc CLKID_MALI_0_SEL>,
-				  <&clkc CLKID_MALI_0>,
-				  <&clkc CLKID_MALI>; /* Glitch free mux */
-		assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>,
-					 <0>, /* Do Nothing */
-					 <&clkc CLKID_MALI_0>;
-		assigned-clock-rates = <0>, /* Do Nothing */
-				       <666666666>,
-				       <0>; /* Do Nothing */
-	};
-};
-
-&i2c_A {
-	clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_AO {
-	clocks = <&clkc CLKID_AO_I2C>;
-};
-
-&i2c_B {
-	clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_C {
-	clocks = <&clkc CLKID_I2C>;
-};
-
 &saradc {
 	compatible = "amlogic,meson-gxbb-saradc", "amlogic,meson-saradc";
 	clocks = <&xtal>,
@@ -620,20 +678,3 @@ &spifc {
 &vpu {
 	compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
 };
-
-&hwrng {
-	clocks = <&clkc CLKID_RNG0>;
-	clock-names = "core";
-};
-
-&hdmi_tx {
-	compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
-	resets = <&reset RESET_HDMITX_CAPB3>,
-		 <&reset RESET_HDMI_SYSTEM_RESET>,
-		 <&reset RESET_HDMI_TX>;
-	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
-		 <&clkc CLKID_GCLK_VENCI_INT0>;
-	clock-names = "isfr", "iahb", "venci";
-};

arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts

@@ -84,6 +84,17 @@ vddio_ao18: regulator-vddio_ao18 {
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
 };
 
 /* P230 has exclusive choice between internal or external PHY */
@@ -113,6 +124,19 @@ external_phy: ethernet-phy@0 {
 	};
 };
 
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &saradc {
 	status = "okay";
 	vref-supply = <&vddio_ao18>;

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts

@@ -54,6 +54,29 @@ power {
 			linux,default-trigger = "default-on";
 		};
 	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
 };
 
 &i2c_A {
@@ -95,7 +118,7 @@ &pwm_ef {
 };
 
 &sd_emmc_a {
-	brcmf: bcrmf@1 {
+	brcmf: wifi@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
 	};

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts

@@ -140,10 +140,10 @@ hdmi_connector_in: endpoint {
 	};
 };
 
-&uart_AO {
-	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
-	pinctrl-names = "default";
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
 };
 
 &ethmac {
@@ -152,12 +152,32 @@ &ethmac {
 	phy-handle = <&internal_phy>;
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 &ir {
 	status = "okay";
 	pinctrl-0 = <&remote_input_ao_pins>;
 	pinctrl-names = "default";
 };
 
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
 /* Wireless SDIO Module */
 &sd_emmc_a {
 	status = "okay";
@@ -217,28 +237,8 @@ &sd_emmc_c {
 	vqmmc-supply = <&vddio_boot>;
 };
 
-&pwm_ef {
-	status = "okay";
-	pinctrl-0 = <&pwm_e_pins>;
-	pinctrl-names = "default";
-	clocks = <&clkc CLKID_FCLK_DIV4>;
-	clock-names = "clkin0";
-};
-
-&cvbs_vdac_port {
-	cvbs_vdac_out: endpoint {
-		remote-endpoint = <&cvbs_connector_in>;
-	};
-};
-
-&hdmi_tx {
+&uart_AO {
 	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};

arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts

@@ -58,6 +58,17 @@ cvbs_connector_in: endpoint {
 			};
 		};
 	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_tx_tmds_out>;
+			};
+		};
+	};
 };
 
 &cvbs_vdac_port {
@@ -66,6 +77,18 @@ cvbs_vdac_out: endpoint {
 	};
 };
 
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
+};
+
 /* This UART is brought out to the DB9 connector */
 &uart_AO {
 	status = "okay";

arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi

@@ -48,7 +48,7 @@ / {
 	compatible = "amlogic,s905x", "amlogic,meson-gxl";
 };
 
-/* S905X Only has access to its internal PHY */
+/* S905X only has access to its internal PHY */
 &ethmac {
 	phy-mode = "rmii";
 	phy-handle = <&internal_phy>;

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -190,9 +190,59 @@ mux {
 				function = "spdif_out_ao";
 			};
 		};
+
+		ao_cec_pins: ao_cec {
+			mux {
+				groups = "ao_cec";
+				function = "cec_ao";
+			};
+		};
+
+		ee_cec_pins: ee_cec {
+			mux {
+				groups = "ee_cec";
+				function = "cec_ao";
+			};
+		};
+	};
+};
+
+&hdmi_tx {
+	compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+	resets = <&reset RESET_HDMITX_CAPB3>,
+		 <&reset RESET_HDMI_SYSTEM_RESET>,
+		 <&reset RESET_HDMI_TX>;
+	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+	clocks = <&clkc CLKID_HDMI_PCLK>,
+		 <&clkc CLKID_CLK81>,
+		 <&clkc CLKID_GCLK_VENCI_INT0>;
+	clock-names = "isfr", "iahb", "venci";
+};
+
+&hiubus {
+	clkc: clock-controller@0 {
+		compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
+		#clock-cells = <1>;
+		reg = <0x0 0x0 0x0 0x3db>;
 	};
 };
 
+&i2c_A {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_AO {
+	clocks = <&clkc CLKID_AO_I2C>;
+};
+
+&i2c_B {
+	clocks = <&clkc CLKID_I2C>;
+};
+
+&i2c_C {
+	clocks = <&clkc CLKID_I2C>;
+};
+
 &periphs {
 	pinctrl_periphs: pinctrl@4b0 {
 		compatible = "amlogic,meson-gxl-periphs-pinctrl";
@@ -203,12 +253,12 @@ pinctrl_periphs: pinctrl@4b0 {
 		gpio: bank@4b0 {
 			reg = <0x0 0x004b0 0x0 0x28>,
 			      <0x0 0x004e8 0x0 0x14>,
-			      <0x0 0x00120 0x0 0x14>,
+			      <0x0 0x00520 0x0 0x14>,
 			      <0x0 0x00430 0x0 0x40>;
 			reg-names = "mux", "pull", "pull-enable", "gpio";
 			gpio-controller;
 			#gpio-cells = <2>;
-			gpio-ranges = <&pinctrl_periphs 0 14 101>;
+			gpio-ranges = <&pinctrl_periphs 0 10 101>;
 		};
 
 		emmc_pins: emmc {
@@ -231,6 +281,22 @@ mux {
 			};
 		};
 
+		spi_pins: spi {
+			mux {
+				groups = "spi_miso",
+					"spi_mosi",
+					"spi_sclk";
+				function = "spi";
+			};
+		};
+
+		spi_ss0_pins: spi-ss0 {
+			mux {
+				groups = "spi_ss0";
+				function = "spi";
+			};
+		};
+
 		sdcard_pins: sdcard {
 			mux {
 				groups = "sdcard_d0",
@@ -354,6 +420,20 @@ mux {
 			};
 		};
 
+		eth_link_led_pins: eth_link_led {
+			mux {
+				groups = "eth_link_led";
+				function = "eth_led";
+			};
+		};
+
+		eth_act_led_pins: eth_act_led {
+			mux {
+				groups = "eth_act_led";
+				function = "eth_led";
+			};
+		};
+		
 		pwm_a_pins: pwm_a {
 			mux {
 				groups = "pwm_a";
@@ -501,30 +581,6 @@ external_mdio: mdio@2009087f {
 	};
 };
 
-&hiubus {
-	clkc: clock-controller@0 {
-		compatible = "amlogic,gxl-clkc", "amlogic,gxbb-clkc";
-		#clock-cells = <1>;
-		reg = <0x0 0x0 0x0 0x3db>;
-	};
-};
-
-&i2c_A {
-	clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_AO {
-	clocks = <&clkc CLKID_AO_I2C>;
-};
-
-&i2c_B {
-	clocks = <&clkc CLKID_I2C>;
-};
-
-&i2c_C {
-	clocks = <&clkc CLKID_I2C>;
-};
-
 &saradc {
 	compatible = "amlogic,meson-gxl-saradc", "amlogic,meson-saradc";
 	clocks = <&xtal>,
@@ -563,15 +619,3 @@ &spifc {
 &vpu {
 	compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu";
 };
-
-&hdmi_tx {
-	compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
-	resets = <&reset RESET_HDMITX_CAPB3>,
-		 <&reset RESET_HDMI_SYSTEM_RESET>,
-		 <&reset RESET_HDMI_TX>;
-	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
-		 <&clkc CLKID_GCLK_VENCI_INT0>;
-	clock-names = "isfr", "iahb", "venci";
-};

arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts

@@ -113,11 +113,49 @@ hdmi_connector_in: endpoint {
 	};
 };
 
-/* This UART is brought out to the DB9 connector */
-&uart_AO {
+&cvbs_vdac_port {
+	cvbs_vdac_out: endpoint {
+		remote-endpoint = <&cvbs_connector_in>;
+	};
+};
+
+&ethmac {
 	status = "okay";
-	pinctrl-0 = <&uart_ao_a_pins>;
+
+	pinctrl-0 = <&eth_pins>;
 	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	amlogic,tx-delay-ns = <2>;
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		max-speed = <1000>;
+	};
+};
+
+&hdmi_tx {
+	status = "okay";
+	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-names = "default";
+};
+
+&hdmi_tx_tmds_port {
+	hdmi_tx_tmds_out: endpoint {
+		remote-endpoint = <&hdmi_connector_in>;
+	};
 };
 
 &ir {
@@ -164,47 +202,8 @@ &sd_emmc_c {
 	vqmmc-supply = <&vddio_boot>;
 };
 
-&ethmac {
-	status = "okay";
-
-	pinctrl-0 = <&eth_pins>;
-	pinctrl-names = "default";
-
-	/* Select external PHY by default */
-	phy-handle = <&external_phy>;
-
-	amlogic,tx-delay-ns = <2>;
-
-	snps,reset-gpio = <&gpio GPIOZ_14 0>;
-	snps,reset-delays-us = <0 10000 1000000>;
-	snps,reset-active-low;
-
-	/* External PHY is in RGMII */
-	phy-mode = "rgmii";
-};
-
-&external_mdio {
-	external_phy: ethernet-phy@0 {
-		compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-		max-speed = <1000>;
-	};
-};
-
-&cvbs_vdac_port {
-	cvbs_vdac_out: endpoint {
-		remote-endpoint = <&cvbs_connector_in>;
-	};
-};
-
-&hdmi_tx {
+&uart_AO {
 	status = "okay";
-	pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
+	pinctrl-0 = <&uart_ao_a_pins>;
 	pinctrl-names = "default";
 };
-
-&hdmi_tx_tmds_port {
-	hdmi_tx_tmds_out: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};

arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts

+/*
+ * Copyright (c) 2016-2017 Andreas Färber
+ *
+ * Based on nexbox-a1:
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Neil Armstrong <narmstrong@baylibre.com>
+ *
+ * Copyright (c) 2016 Endless Computers, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "meson-gxm.dtsi"
+
+/ {
+	compatible = "kingnovel,r-box-pro", "amlogic,s912", "amlogic,meson-gxm";
+	model = "R-Box Pro";
+
+	aliases {
+		serial0 = &uart_AO;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x0 0x0 0x80000000>; /* 2 GiB or 3 GiB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		blue {
+			label = "rbox-pro:blue:on";
+			gpios = <&gpio_ao GPIOAO_9 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+		};
+
+		red {
+			label = "rbox-pro:red:standby";
+			gpios = <&gpio GPIODV_28 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+			retain-state-suspended;
+			panic-indicator;
+		};
+	};
+
+	vddio_boot: regulator-vddio-boot {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDIO_BOOT";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	vddao_3v3: regulator-vddao-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDDAO_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	vcc_3v3: regulator-vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	emmc_pwrseq: emmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;
+	};
+
+	wifi32k: wifi32k {
+		compatible = "pwm-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+		clocks = <&wifi32k>;
+		clock-names = "ext_clock";
+	};
+};
+
+&ethmac {
+	status = "okay";
+
+	pinctrl-0 = <&eth_pins>;
+	pinctrl-names = "default";
+
+	/* Select external PHY by default */
+	phy-handle = <&external_phy>;
+
+	snps,reset-gpio = <&gpio GPIOZ_14 0>;
+	snps,reset-delays-us = <0 10000 1000000>;
+	snps,reset-active-low;
+
+	amlogic,tx-delay-ns = <2>;
+
+	/* External PHY is in RGMII */
+	phy-mode = "rgmii";
+};
+
+&external_mdio {
+	external_phy: ethernet-phy@0 {
+		compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+		max-speed = <1000>;
+	};
+};
+
+&ir {
+	status = "okay";
+	pinctrl-0 = <&remote_input_ao_pins>;
+	pinctrl-names = "default";
+};
+
+&pwm_ef {
+	status = "okay";
+	pinctrl-0 = <&pwm_e_pins>;
+	pinctrl-names = "default";
+	clocks = <&clkc CLKID_FCLK_DIV4>;
+	clock-names = "clkin0";
+};
+
+/* Wireless SDIO Module */
+&sd_emmc_a {
+	status = "okay";
+	pinctrl-0 = <&sdio_pins>;
+	pinctrl-names = "default";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+
+	non-removable;
+	disable-wp;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+
+	brcmf: brcmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* SD card */
+&sd_emmc_b {
+	status = "okay";
+	pinctrl-0 = <&sdcard_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <4>;
+	cap-sd-highspeed;
+	max-frequency = <100000000>;
+	disable-wp;
+
+	cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+	cd-inverted;
+
+	vmmc-supply = <&vddao_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+	status = "okay";
+	pinctrl-0 = <&emmc_pins>;
+	pinctrl-names = "default";
+
+	bus-width = <8>;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	non-removable;
+	disable-wp;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+
+	mmc-pwrseq = <&emmc_pwrseq>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vddio_boot>;
+};
+
+&uart_AO {
+	status = "okay";
+	pinctrl-0 = <&uart_ao_a_pins>;
+	pinctrl-names = "default";
+};