Commit 10594f67 authored by Roland Stigge's avatar Roland Stigge Committed by David Woodhouse

mtd: lpc32xx_slc: Cleanup after DT-only conversion

The LPC32xx's DT-only conversion of the SLC NAND driver makes NAND config via
platform_data obsolete. Dropped by this patch.

Further, the driver really needs CONFIG_OF, which is already reflected by the
dependency on ARCH_LPC32XX which depends on CONFIG_OF. So also dropping
CONFIG_OF ifdefs.

There is still platform_data necessary to supply the dma_filter callback for
the dma engine. This is a completely different data structure than the old
platform_data for NAND config, so renaming some old "pdata" variable to "ncfg"
to prevent confusion with the new platform data.
Signed-off-by: default avatarRoland Stigge <stigge@antcom.de>
Signed-off-by: default avatarArtem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: default avatarDavid Woodhouse <David.Woodhouse@intel.com>
parent e1f5b3f6
......@@ -719,45 +719,38 @@ static int lpc32xx_nand_dma_setup(struct lpc32xx_nand_host *host)
return 0;
}
#ifdef CONFIG_OF
static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
{
struct lpc32xx_nand_cfg_slc *pdata;
struct lpc32xx_nand_cfg_slc *ncfg;
struct device_node *np = dev->of_node;
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
dev_err(dev, "could not allocate memory for platform data\n");
ncfg = devm_kzalloc(dev, sizeof(*ncfg), GFP_KERNEL);
if (!ncfg) {
dev_err(dev, "could not allocate memory for NAND config\n");
return NULL;
}
of_property_read_u32(np, "nxp,wdr-clks", &pdata->wdr_clks);
of_property_read_u32(np, "nxp,wwidth", &pdata->wwidth);
of_property_read_u32(np, "nxp,whold", &pdata->whold);
of_property_read_u32(np, "nxp,wsetup", &pdata->wsetup);
of_property_read_u32(np, "nxp,rdr-clks", &pdata->rdr_clks);
of_property_read_u32(np, "nxp,rwidth", &pdata->rwidth);
of_property_read_u32(np, "nxp,rhold", &pdata->rhold);
of_property_read_u32(np, "nxp,rsetup", &pdata->rsetup);
if (!pdata->wdr_clks || !pdata->wwidth || !pdata->whold ||
!pdata->wsetup || !pdata->rdr_clks || !pdata->rwidth ||
!pdata->rhold || !pdata->rsetup) {
of_property_read_u32(np, "nxp,wdr-clks", &ncfg->wdr_clks);
of_property_read_u32(np, "nxp,wwidth", &ncfg->wwidth);
of_property_read_u32(np, "nxp,whold", &ncfg->whold);
of_property_read_u32(np, "nxp,wsetup", &ncfg->wsetup);
of_property_read_u32(np, "nxp,rdr-clks", &ncfg->rdr_clks);
of_property_read_u32(np, "nxp,rwidth", &ncfg->rwidth);
of_property_read_u32(np, "nxp,rhold", &ncfg->rhold);
of_property_read_u32(np, "nxp,rsetup", &ncfg->rsetup);
if (!ncfg->wdr_clks || !ncfg->wwidth || !ncfg->whold ||
!ncfg->wsetup || !ncfg->rdr_clks || !ncfg->rwidth ||
!ncfg->rhold || !ncfg->rsetup) {
dev_err(dev, "chip parameters not specified correctly\n");
return NULL;
}
pdata->use_bbt = of_get_nand_on_flash_bbt(np);
pdata->wp_gpio = of_get_named_gpio(np, "gpios", 0);
ncfg->use_bbt = of_get_nand_on_flash_bbt(np);
ncfg->wp_gpio = of_get_named_gpio(np, "gpios", 0);
return pdata;
}
#else
static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
{
return NULL;
return ncfg;
}
#endif
/*
* Probe for NAND controller
......@@ -793,10 +786,9 @@ static int __devinit lpc32xx_nand_probe(struct platform_device *pdev)
if (pdev->dev.of_node)
host->ncfg = lpc32xx_parse_dt(&pdev->dev);
else
host->ncfg = pdev->dev.platform_data;
if (!host->ncfg) {
dev_err(&pdev->dev, "Missing platform data\n");
dev_err(&pdev->dev,
"Missing or bad NAND config from device tree\n");
return -ENOENT;
}
if (host->ncfg->wp_gpio == -EPROBE_DEFER)
......@@ -1021,13 +1013,11 @@ static int lpc32xx_nand_suspend(struct platform_device *pdev, pm_message_t pm)
#define lpc32xx_nand_suspend NULL
#endif
#if defined(CONFIG_OF)
static const struct of_device_id lpc32xx_nand_match[] = {
{ .compatible = "nxp,lpc3220-slc" },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, lpc32xx_nand_match);
#endif
static struct platform_driver lpc32xx_nand_driver = {
.probe = lpc32xx_nand_probe,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment