Commit 1081bb83 authored by Sergio Paracuellos's avatar Sergio Paracuellos Committed by Greg Kroah-Hartman

staging: slicoss: avoid CamelCases in slichw.h

Replace CamelCases to comply with the standard kernel coding style.
Signed-off-by: default avatarSergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent a81691d1
......@@ -245,18 +245,18 @@ struct slic_hddr_wds {
} hdrs_14port;
struct {
u32 frame_status;
u16 ByteCnt;
u16 TpChksum;
u16 CtxHash;
u16 MacHash;
u32 BufLnk;
u16 byte_cnt;
u16 tp_chksum;
u16 ctx_hash;
u16 mac_hash;
u32 buf_lnk;
} hdrs_gbit;
} u0;
};
#define frame_status14 u0.hdrs_14port.frame_status
#define frame_status_b14 u0.hdrs_14port.frame_status_b
#define frame_statusGB u0.hdrs_gbit.frame_status
#define frame_status_gb u0.hdrs_gbit.frame_status
struct slic_host64sg {
u32 paddrl;
......@@ -460,7 +460,7 @@ struct slic_pnp_capabilities {
};
struct slic_config_mac {
u8 macaddrA[6];
u8 macaddr_a[6];
};
#define ATK_FRU_FORMAT 0x00
......@@ -520,56 +520,56 @@ union oemfru {
* SLIC EEPROM structure for Mojave
*/
struct slic_eeprom {
u16 Id; /* 00 EEPROM/FLASH Magic code 'A5A5'*/
u16 EecodeSize; /* 01 Size of EEPROM Codes (bytes * 4)*/
u16 FlashSize; /* 02 Flash size */
u16 EepromSize; /* 03 EEPROM Size */
u16 VendorId; /* 04 Vendor ID */
u16 DeviceId; /* 05 Device ID */
u8 RevisionId; /* 06 Revision ID */
u8 ClassCode[3]; /* 07 Class Code */
u8 DbgIntPin; /* 08 Debug Interrupt pin */
u8 NetIntPin0; /* Network Interrupt Pin */
u8 MinGrant; /* 09 Minimum grant */
u8 MaxLat; /* Maximum Latency */
u16 PciStatus; /* 10 PCI Status */
u16 SubSysVId; /* 11 Subsystem Vendor Id */
u16 SubSysId; /* 12 Subsystem ID */
u16 DbgDevId; /* 13 Debug Device Id */
u16 DramRomFn; /* 14 Dram/Rom function */
u16 DSize2Pci; /* 15 DRAM size to PCI (bytes * 64K) */
u16 RSize2Pci; /* 16 ROM extension size to PCI (bytes * 4k) */
u8 NetIntPin1; /* 17 Network Interface Pin 1
u16 id; /* 00 EEPROM/FLASH Magic code 'A5A5'*/
u16 eecode_size; /* 01 Size of EEPROM Codes (bytes * 4)*/
u16 flash_size; /* 02 Flash size */
u16 eeprom_size; /* 03 EEPROM Size */
u16 vendor_id; /* 04 Vendor ID */
u16 device_id; /* 05 Device ID */
u8 revision_id; /* 06 Revision ID */
u8 class_code[3]; /* 07 Class Code */
u8 dbg_int_pin; /* 08 Debug Interrupt pin */
u8 net_int_pin0; /* Network Interrupt Pin */
u8 min_grant; /* 09 Minimum grant */
u8 max_lat; /* Maximum Latency */
u16 pci_status; /* 10 PCI Status */
u16 sub_sys_vid; /* 11 Subsystem Vendor Id */
u16 sub_sys_id; /* 12 Subsystem ID */
u16 dbg_dev_id; /* 13 Debug Device Id */
u16 dram_rom_fn; /* 14 Dram/Rom function */
u16 dsize2pci; /* 15 DRAM size to PCI (bytes * 64K) */
u16 rsize2pci; /* 16 ROM extension size to PCI (bytes * 4k) */
u8 net_int_pin1; /* 17 Network Interface Pin 1
* (simba/leone only)
*/
u8 NetIntPin2; /* Network Interface Pin 2 (simba/leone only)*/
u8 net_int_pin2; /* Network Interface Pin 2 (simba/leone only)*/
union {
u8 NetIntPin3; /* 18 Network Interface Pin 3 (simba only) */
u8 FreeTime; /* FreeTime setting (leone/mojave only) */
u8 net_int_pin3;/* 18 Network Interface Pin 3 (simba only) */
u8 free_time; /* FreeTime setting (leone/mojave only) */
} u1;
u8 TBIctl; /* 10-bit interface control (Mojave only) */
u16 DramSize; /* 19 DRAM size (bytes * 64k) */
u8 tbi_ctl; /* 10-bit interface control (Mojave only) */
u16 dram_size; /* 19 DRAM size (bytes * 64k) */
union {
struct {
/* Mac Interface Specific portions */
struct slic_config_mac MacInfo[SLIC_NBR_MACS];
struct slic_config_mac mac_info[SLIC_NBR_MACS];
} mac; /* MAC access for all boards */
struct {
/* use above struct for MAC access */
struct slic_config_mac pad[SLIC_NBR_MACS - 1];
u16 DeviceId2; /* Device ID for 2nd PCI function */
u8 IntPin2; /* Interrupt pin for 2nd PCI function */
u8 ClassCode2[3]; /* Class Code for 2nd PCI function */
u16 device_id2; /* Device ID for 2nd PCI function */
u8 int_pin2; /* Interrupt pin for 2nd PCI function */
u8 class_code2[3]; /* Class Code for 2nd PCI function */
} mojave; /* 2nd function access for gigabit board */
} u2;
u16 CfgByte6; /* Config Byte 6 */
u16 PMECapab; /* Power Mgment capabilities */
u16 NwClkCtrls; /* NetworkClockControls */
u8 FruFormat; /* Alacritech FRU format type */
struct atk_fru AtkFru; /* Alacritech FRU information */
u8 OemFruFormat; /* optional OEM FRU format type */
union oemfru OemFru; /* optional OEM FRU information */
u8 Pad[4]; /* Pad to 128 bytes - includes 2 cksum bytes
u16 cfg_byte6; /* Config Byte 6 */
u16 pme_capab; /* Power Mgment capabilities */
u16 nw_clk_ctrls; /* NetworkClockControls */
u8 fru_format; /* Alacritech FRU format type */
struct atk_fru atk_fru; /* Alacritech FRU information */
u8 oem_fru_format; /* optional OEM FRU format type */
union oemfru oem_fru; /* optional OEM FRU information */
u8 pad[4]; /* Pad to 128 bytes - includes 2 cksum bytes
* (if OEM FRU info exists) and two unusable
* bytes at the end
*/
......@@ -577,46 +577,46 @@ struct slic_eeprom {
/* SLIC EEPROM structure for Oasis */
struct oslic_eeprom {
u16 Id; /* 00 EEPROM/FLASH Magic code 'A5A5' */
u16 EecodeSize; /* 01 Size of EEPROM Codes (bytes * 4)*/
u16 FlashConfig0; /* 02 Flash Config for SPI device 0 */
u16 FlashConfig1; /* 03 Flash Config for SPI device 1 */
u16 VendorId; /* 04 Vendor ID */
u16 DeviceId; /* 05 Device ID (function 0) */
u8 RevisionId; /* 06 Revision ID */
u8 ClassCode[3]; /* 07 Class Code for PCI function 0 */
u8 IntPin1; /* 08 Interrupt pin for PCI function 1*/
u8 ClassCode2[3]; /* 09 Class Code for PCI function 1 */
u8 IntPin2; /* 10 Interrupt pin for PCI function 2*/
u8 IntPin0; /* Interrupt pin for PCI function 0*/
u8 MinGrant; /* 11 Minimum grant */
u8 MaxLat; /* Maximum Latency */
u16 SubSysVId; /* 12 Subsystem Vendor Id */
u16 SubSysId; /* 13 Subsystem ID */
u16 FlashSize; /* 14 Flash size (bytes / 4K) */
u16 DSize2Pci; /* 15 DRAM size to PCI (bytes / 64K) */
u16 RSize2Pci; /* 16 Flash (ROM extension) size to PCI
u16 id; /* 00 EEPROM/FLASH Magic code 'A5A5' */
u16 eecode_size; /* 01 Size of EEPROM Codes (bytes * 4)*/
u16 flash_config0; /* 02 Flash Config for SPI device 0 */
u16 flash_config1; /* 03 Flash Config for SPI device 1 */
u16 vendor_id; /* 04 Vendor ID */
u16 device_id; /* 05 Device ID (function 0) */
u8 revision_id; /* 06 Revision ID */
u8 class_code[3]; /* 07 Class Code for PCI function 0 */
u8 int_pin1; /* 08 Interrupt pin for PCI function 1*/
u8 class_code2[3]; /* 09 Class Code for PCI function 1 */
u8 int_pin2; /* 10 Interrupt pin for PCI function 2*/
u8 int_pin0; /* Interrupt pin for PCI function 0*/
u8 min_grant; /* 11 Minimum grant */
u8 max_lat; /* Maximum Latency */
u16 sub_sys_vid; /* 12 Subsystem Vendor Id */
u16 sub_sys_id; /* 13 Subsystem ID */
u16 flash_size; /* 14 Flash size (bytes / 4K) */
u16 dsize2pci; /* 15 DRAM size to PCI (bytes / 64K) */
u16 rsize2pci; /* 16 Flash (ROM extension) size to PCI
* (bytes / 4K)
*/
u16 DeviceId1; /* 17 Device Id (function 1) */
u16 DeviceId2; /* 18 Device Id (function 2) */
u16 CfgByte6; /* 19 Device Status Config Bytes 6-7 */
u16 PMECapab; /* 20 Power Mgment capabilities */
u8 MSICapab; /* 21 MSI capabilities */
u8 ClockDivider; /* Clock divider */
u16 PciStatusLow; /* 22 PCI Status bits 15:0 */
u16 PciStatusHigh; /* 23 PCI Status bits 31:16 */
u16 DramConfigLow; /* 24 DRAM Configuration bits 15:0 */
u16 DramConfigHigh; /* 25 DRAM Configuration bits 31:16 */
u16 DramSize; /* 26 DRAM size (bytes / 64K) */
u16 GpioTbiCtl; /* 27 GPIO/TBI controls for functions 1/0 */
u16 EepromSize; /* 28 EEPROM Size */
struct slic_config_mac MacInfo[2]; /* 29 MAC addresses (2 ports) */
u8 FruFormat; /* 35 Alacritech FRU format type */
struct atk_fru AtkFru; /* Alacritech FRU information */
u8 OemFruFormat; /* optional OEM FRU format type */
union oemfru OemFru; /* optional OEM FRU information */
u8 Pad[4]; /* Pad to 128 bytes - includes 2 checksum bytes
u16 device_id1; /* 17 Device Id (function 1) */
u16 device_id2; /* 18 Device Id (function 2) */
u16 cfg_byte6; /* 19 Device Status Config Bytes 6-7 */
u16 pme_capab; /* 20 Power Mgment capabilities */
u8 msi_capab; /* 21 MSI capabilities */
u8 clock_divider; /* Clock divider */
u16 pci_status_low; /* 22 PCI Status bits 15:0 */
u16 pci_status_high; /* 23 PCI Status bits 31:16 */
u16 dram_config_low; /* 24 DRAM Configuration bits 15:0 */
u16 dram_config_high; /* 25 DRAM Configuration bits 31:16 */
u16 dram_size; /* 26 DRAM size (bytes / 64K) */
u16 gpio_tbi_ctl; /* 27 GPIO/TBI controls for functions 1/0 */
u16 eeprom_size; /* 28 EEPROM Size */
struct slic_config_mac mac_info[2]; /* 29 MAC addresses (2 ports) */
u8 fru_format; /* 35 Alacritech FRU format type */
struct atk_fru atk_fru; /* Alacritech FRU information */
u8 oem_fru_format; /* optional OEM FRU format type */
union oemfru oem_fru; /* optional OEM FRU information */
u8 pad[4]; /* Pad to 128 bytes - includes 2 checksum bytes
* (if OEM FRU info exists) and two unusable
* bytes at the end
*/
......@@ -633,18 +633,18 @@ struct oslic_eeprom {
* SlicGetConfigData()
*/
struct slic_config {
bool EepromValid; /* Valid EEPROM flag (checksum good?) */
u16 DramSize; /* DRAM size (bytes / 64K) */
struct slic_config_mac MacInfo[SLIC_NBR_MACS]; /* MAC addresses */
u8 FruFormat; /* Alacritech FRU format type */
struct atk_fru AtkFru; /* Alacritech FRU information */
u8 OemFruFormat; /* optional OEM FRU format type */
bool eeprom_valid; /* Valid EEPROM flag (checksum good?) */
u16 dram_size; /* DRAM size (bytes / 64K) */
struct slic_config_mac mac_info[SLIC_NBR_MACS]; /* MAC addresses */
u8 fru_format; /* Alacritech FRU format type */
struct atk_fru atk_fru; /* Alacritech FRU information */
u8 oem_fru_format; /* optional OEM FRU format type */
union {
struct vendor1_fru vendor1_fru;
struct vendor2_fru vendor2_fru;
struct vendor3_fru vendor3_fru;
struct vendor4_fru vendor4_fru;
} OemFru;
} oem_fru;
};
#pragma pack()
......
......@@ -540,7 +540,7 @@ static void slic_adapter_set_hwaddr(struct adapter *adapter)
if ((adapter->card) && (card->config_set)) {
memcpy(adapter->macaddr,
card->config.MacInfo[adapter->functionnumber].macaddrA,
card->config.mac_info[adapter->functionnumber].macaddr_a,
sizeof(struct slic_config_mac));
if (is_zero_ether_addr(adapter->currmacaddr))
memcpy(adapter->currmacaddr, adapter->macaddr,
......@@ -1876,8 +1876,8 @@ static void slic_rcv_handle_error(struct adapter *adapter,
if (hdr->frame_status_b14 & VRHSTATB_IPHERR)
adapter->if_events.ip_hlen++;
} else {
if (hdr->frame_statusGB & VGBSTAT_XPERR) {
u32 xerr = hdr->frame_statusGB >> VGBSTAT_XERRSHFT;
if (hdr->frame_status_gb & VGBSTAT_XPERR) {
u32 xerr = hdr->frame_status_gb >> VGBSTAT_XERRSHFT;
if (xerr == VGBSTAT_XCSERR)
adapter->if_events.tp_csum++;
......@@ -1886,10 +1886,10 @@ static void slic_rcv_handle_error(struct adapter *adapter,
if (xerr == VGBSTAT_XHLEN)
adapter->if_events.tp_hlen++;
}
if (hdr->frame_statusGB & VGBSTAT_NETERR) {
if (hdr->frame_status_gb & VGBSTAT_NETERR) {
u32 nerr =
(hdr->
frame_statusGB >> VGBSTAT_NERRSHFT) &
frame_status_gb >> VGBSTAT_NERRSHFT) &
VGBSTAT_NERRMSK;
if (nerr == VGBSTAT_NCSERR)
adapter->if_events.ip_csum++;
......@@ -1898,8 +1898,8 @@ static void slic_rcv_handle_error(struct adapter *adapter,
if (nerr == VGBSTAT_NHLEN)
adapter->if_events.ip_hlen++;
}
if (hdr->frame_statusGB & VGBSTAT_LNKERR) {
u32 lerr = hdr->frame_statusGB & VGBSTAT_LERRMSK;
if (hdr->frame_status_gb & VGBSTAT_LNKERR) {
u32 lerr = hdr->frame_status_gb & VGBSTAT_LERRMSK;
if (lerr == VGBSTAT_LDEARLY)
adapter->if_events.rcvearly++;
......@@ -2682,13 +2682,13 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
case SLIC_2GB_DEVICE_ID:
/* extract EEPROM data and pointers to EEPROM data */
pOeeprom = (struct oslic_eeprom *)peeprom;
eecodesize = pOeeprom->EecodeSize;
dramsize = pOeeprom->DramSize;
pmac = pOeeprom->MacInfo;
fruformat = pOeeprom->FruFormat;
patkfru = &pOeeprom->AtkFru;
oemfruformat = pOeeprom->OemFruFormat;
poemfru = &pOeeprom->OemFru;
eecodesize = pOeeprom->eecode_size;
dramsize = pOeeprom->dram_size;
pmac = pOeeprom->mac_info;
fruformat = pOeeprom->fru_format;
patkfru = &pOeeprom->atk_fru;
oemfruformat = pOeeprom->oem_fru_format;
poemfru = &pOeeprom->oem_fru;
macaddrs = 2;
/*
* Minor kludge for Oasis card
......@@ -2699,17 +2699,17 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
break;
default:
/* extract EEPROM data and pointers to EEPROM data */
eecodesize = peeprom->EecodeSize;
dramsize = peeprom->DramSize;
pmac = peeprom->u2.mac.MacInfo;
fruformat = peeprom->FruFormat;
patkfru = &peeprom->AtkFru;
oemfruformat = peeprom->OemFruFormat;
poemfru = &peeprom->OemFru;
eecodesize = peeprom->eecode_size;
dramsize = peeprom->dram_size;
pmac = peeprom->u2.mac.mac_info;
fruformat = peeprom->fru_format;
patkfru = &peeprom->atk_fru;
oemfruformat = peeprom->oem_fru_format;
poemfru = &peeprom->oem_fru;
break;
}
card->config.EepromValid = false;
card->config.eeprom_valid = false;
/* see if the EEPROM is valid by checking it's checksum */
if ((eecodesize <= MAX_EECODE_SIZE) &&
......@@ -2726,26 +2726,26 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter)
* we wouldn't need this
*/
if (ee_chksum == calc_chksum)
card->config.EepromValid = true;
card->config.eeprom_valid = true;
}
/* copy in the DRAM size */
card->config.DramSize = dramsize;
card->config.dram_size = dramsize;
/* copy in the MAC address(es) */
for (i = 0; i < macaddrs; i++) {
memcpy(&card->config.MacInfo[i],
memcpy(&card->config.mac_info[i],
&pmac[i], sizeof(struct slic_config_mac));
}
/* copy the Alacritech FRU information */
card->config.FruFormat = fruformat;
memcpy(&card->config.AtkFru, patkfru, sizeof(struct atk_fru));
card->config.fru_format = fruformat;
memcpy(&card->config.atk_fru, patkfru, sizeof(struct atk_fru));
pci_free_consistent(adapter->pcidev,
sizeof(struct slic_eeprom),
peeprom, phys_config);
if (!card->config.EepromValid) {
if (!card->config.eeprom_valid) {
slic_write64(adapter, SLIC_REG_ISP, 0, 0);
slic_flush_write(adapter);
dev_err(&adapter->pcidev->dev, "EEPROM invalid.\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment