Commit 10a5210e authored by Stephen Backway's avatar Stephen Backway Committed by Mauro Carvalho Chehab

[media] cx23885: Add support for Hauppauge WinTV quadHD DVB version

Add support fo the Hauppauge WinTV quadHD DVB version.
IR support has not been provided, all 4 tuners, demodulators etc are working.
Further documentation can be found on Linux TV wiki.
Signed-off-by: default avatarStephen Backway <stev391@gmail.com>
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent c000e5da
...@@ -54,3 +54,4 @@ ...@@ -54,3 +54,4 @@
53 -> Hauppauge WinTV Starburst [0070:c12a] 53 -> Hauppauge WinTV Starburst [0070:c12a]
54 -> ViewCast 260e [1576:0260] 54 -> ViewCast 260e [1576:0260]
55 -> ViewCast 460e [1576:0460] 55 -> ViewCast 460e [1576:0460]
56 -> Hauppauge WinTV-quadHD (DVB) [0070:6a28,0070:6b28]
...@@ -765,6 +765,11 @@ struct cx23885_board cx23885_boards[] = { ...@@ -765,6 +765,11 @@ struct cx23885_board cx23885_boards[] = {
.amux = CX25840_AUDIO7, .amux = CX25840_AUDIO7,
} }, } },
}, },
[CX23885_BOARD_HAUPPAUGE_QUADHD_DVB] = {
.name = "Hauppauge WinTV-QuadHD-DVB",
.portb = CX23885_MPEG_DVB,
.portc = CX23885_MPEG_DVB,
},
}; };
const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards); const unsigned int cx23885_bcount = ARRAY_SIZE(cx23885_boards);
...@@ -1060,6 +1065,14 @@ struct cx23885_subid cx23885_subids[] = { ...@@ -1060,6 +1065,14 @@ struct cx23885_subid cx23885_subids[] = {
.subvendor = 0x1576, .subvendor = 0x1576,
.subdevice = 0x0460, .subdevice = 0x0460,
.card = CX23885_BOARD_VIEWCAST_460E, .card = CX23885_BOARD_VIEWCAST_460E,
}, {
.subvendor = 0x0070,
.subdevice = 0x6a28,
.card = CX23885_BOARD_HAUPPAUGE_QUADHD_DVB, /* Tuner Pair 1 */
}, {
.subvendor = 0x0070,
.subdevice = 0x6b28,
.card = CX23885_BOARD_HAUPPAUGE_QUADHD_DVB, /* Tuner Pair 2 */
}, },
}; };
const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids); const unsigned int cx23885_idcount = ARRAY_SIZE(cx23885_subids);
...@@ -1257,6 +1270,14 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data) ...@@ -1257,6 +1270,14 @@ static void hauppauge_eeprom(struct cx23885_dev *dev, u8 *eeprom_data)
case 150329: case 150329:
/* WinTV-HVR5525 (PCIe, DVB-S/S2, DVB-T/T2/C) */ /* WinTV-HVR5525 (PCIe, DVB-S/S2, DVB-T/T2/C) */
break; break;
case 166100:
/* WinTV-QuadHD (DVB) Tuner Pair 1 (PCIe, IR, half height,
DVB-T/T2/C, DVB-T/T2/C */
break;
case 166101:
/* WinTV-QuadHD (DVB) Tuner Pair 2 (PCIe, IR, half height,
DVB-T/T2/C, DVB-T/T2/C */
break;
default: default:
printk(KERN_WARNING "%s: warning: " printk(KERN_WARNING "%s: warning: "
"unknown hauppauge model #%d\n", "unknown hauppauge model #%d\n",
...@@ -1729,20 +1750,22 @@ void cx23885_gpio_setup(struct cx23885_dev *dev) ...@@ -1729,20 +1750,22 @@ void cx23885_gpio_setup(struct cx23885_dev *dev)
cx23885_gpio_set(dev, GPIO_2); cx23885_gpio_set(dev, GPIO_2);
break; break;
case CX23885_BOARD_HAUPPAUGE_HVR5525: case CX23885_BOARD_HAUPPAUGE_HVR5525:
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
/* /*
* GPIO-00 IR_WIDE * HVR5525 GPIO Details:
* GPIO-02 wake# * GPIO-00 IR_WIDE
* GPIO-03 VAUX Pres. * GPIO-02 wake#
* GPIO-07 PROG# * GPIO-03 VAUX Pres.
* GPIO-08 SAT_RESN * GPIO-07 PROG#
* GPIO-09 TER_RESN * GPIO-08 SAT_RESN
* GPIO-10 B2_SENSE * GPIO-09 TER_RESN
* GPIO-11 B1_SENSE * GPIO-10 B2_SENSE
* GPIO-15 IR_LED_STATUS * GPIO-11 B1_SENSE
* GPIO-19 IR_NARROW * GPIO-15 IR_LED_STATUS
* GPIO-20 Blauster1 * GPIO-19 IR_NARROW
* ALTGPIO VAUX_SWITCH * GPIO-20 Blauster1
* AUX_PLL_CLK : Blaster2 * ALTGPIO VAUX_SWITCH
* AUX_PLL_CLK : Blaster2
*/ */
/* Put the parts into reset and back */ /* Put the parts into reset and back */
cx23885_gpio_enable(dev, GPIO_8 | GPIO_9, 1); cx23885_gpio_enable(dev, GPIO_8 | GPIO_9, 1);
...@@ -1802,6 +1825,7 @@ int cx23885_ir_init(struct cx23885_dev *dev) ...@@ -1802,6 +1825,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_HVR1255: case CX23885_BOARD_HAUPPAUGE_HVR1255:
case CX23885_BOARD_HAUPPAUGE_HVR1255_22111: case CX23885_BOARD_HAUPPAUGE_HVR1255_22111:
case CX23885_BOARD_HAUPPAUGE_HVR1210: case CX23885_BOARD_HAUPPAUGE_HVR1210:
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
/* FIXME: Implement me */ /* FIXME: Implement me */
break; break;
case CX23885_BOARD_HAUPPAUGE_HVR1270: case CX23885_BOARD_HAUPPAUGE_HVR1270:
...@@ -2000,6 +2024,7 @@ void cx23885_card_setup(struct cx23885_dev *dev) ...@@ -2000,6 +2024,7 @@ void cx23885_card_setup(struct cx23885_dev *dev)
case CX23885_BOARD_HAUPPAUGE_STARBURST: case CX23885_BOARD_HAUPPAUGE_STARBURST:
case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE: case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
case CX23885_BOARD_HAUPPAUGE_HVR5525: case CX23885_BOARD_HAUPPAUGE_HVR5525:
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
if (dev->i2c_bus[0].i2c_rc == 0) if (dev->i2c_bus[0].i2c_rc == 0)
hauppauge_eeprom(dev, eeprom+0xc0); hauppauge_eeprom(dev, eeprom+0xc0);
break; break;
...@@ -2145,6 +2170,14 @@ void cx23885_card_setup(struct cx23885_dev *dev) ...@@ -2145,6 +2170,14 @@ void cx23885_card_setup(struct cx23885_dev *dev)
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */ ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break; break;
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
ts1->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts1->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
ts2->gen_ctrl_val = 0xc; /* Serial bus + punctured clock */
ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
ts2->src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
break;
case CX23885_BOARD_HAUPPAUGE_HVR1250: case CX23885_BOARD_HAUPPAUGE_HVR1250:
case CX23885_BOARD_HAUPPAUGE_HVR1500: case CX23885_BOARD_HAUPPAUGE_HVR1500:
case CX23885_BOARD_HAUPPAUGE_HVR1500Q: case CX23885_BOARD_HAUPPAUGE_HVR1500Q:
......
...@@ -2268,9 +2268,107 @@ static int dvb_register(struct cx23885_tsport *port) ...@@ -2268,9 +2268,107 @@ static int dvb_register(struct cx23885_tsport *port)
} }
break; break;
} }
case CX23885_BOARD_HAUPPAUGE_QUADHD_DVB:
switch (port->nr) {
/* port b - Terrestrial/cable */
case 1:
/* attach frontend */
memset(&si2168_config, 0, sizeof(si2168_config));
si2168_config.i2c_adapter = &adapter;
si2168_config.fe = &fe0->dvb.frontend;
si2168_config.ts_mode = SI2168_TS_SERIAL;
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "si2168", I2C_NAME_SIZE);
info.addr = 0x64;
info.platform_data = &si2168_config;
request_module("%s", info.type);
client_demod = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
if (!client_demod || !client_demod->dev.driver)
goto frontend_detach;
if (!try_module_get(client_demod->dev.driver->owner)) {
i2c_unregister_device(client_demod);
goto frontend_detach;
}
port->i2c_client_demod = client_demod;
/* attach tuner */
memset(&si2157_config, 0, sizeof(si2157_config));
si2157_config.fe = fe0->dvb.frontend;
si2157_config.if_port = 1;
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
info.addr = 0x60;
info.platform_data = &si2157_config;
request_module("%s", info.type);
client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
if (!client_tuner || !client_tuner->dev.driver) {
module_put(client_demod->dev.driver->owner);
i2c_unregister_device(client_demod);
port->i2c_client_demod = NULL;
goto frontend_detach;
}
if (!try_module_get(client_tuner->dev.driver->owner)) {
i2c_unregister_device(client_tuner);
module_put(client_demod->dev.driver->owner);
i2c_unregister_device(client_demod);
port->i2c_client_demod = NULL;
goto frontend_detach;
}
port->i2c_client_tuner = client_tuner;
break;
/* port c - terrestrial/cable */
case 2:
/* attach frontend */
memset(&si2168_config, 0, sizeof(si2168_config));
si2168_config.i2c_adapter = &adapter;
si2168_config.fe = &fe0->dvb.frontend;
si2168_config.ts_mode = SI2168_TS_SERIAL;
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "si2168", I2C_NAME_SIZE);
info.addr = 0x66;
info.platform_data = &si2168_config;
request_module("%s", info.type);
client_demod = i2c_new_device(&dev->i2c_bus[0].i2c_adap, &info);
if (!client_demod || !client_demod->dev.driver)
goto frontend_detach;
if (!try_module_get(client_demod->dev.driver->owner)) {
i2c_unregister_device(client_demod);
goto frontend_detach;
}
port->i2c_client_demod = client_demod;
/* attach tuner */
memset(&si2157_config, 0, sizeof(si2157_config));
si2157_config.fe = fe0->dvb.frontend;
si2157_config.if_port = 1;
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
info.addr = 0x62;
info.platform_data = &si2157_config;
request_module("%s", info.type);
client_tuner = i2c_new_device(&dev->i2c_bus[1].i2c_adap, &info);
if (!client_tuner || !client_tuner->dev.driver) {
module_put(client_demod->dev.driver->owner);
i2c_unregister_device(client_demod);
port->i2c_client_demod = NULL;
goto frontend_detach;
}
if (!try_module_get(client_tuner->dev.driver->owner)) {
i2c_unregister_device(client_tuner);
module_put(client_demod->dev.driver->owner);
i2c_unregister_device(client_demod);
port->i2c_client_demod = NULL;
goto frontend_detach;
}
port->i2c_client_tuner = client_tuner;
break;
}
break;
default: default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card " printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n", " isn't supported yet\n",
dev->name); dev->name);
break; break;
} }
......
...@@ -103,6 +103,7 @@ ...@@ -103,6 +103,7 @@
#define CX23885_BOARD_HAUPPAUGE_STARBURST 53 #define CX23885_BOARD_HAUPPAUGE_STARBURST 53
#define CX23885_BOARD_VIEWCAST_260E 54 #define CX23885_BOARD_VIEWCAST_260E 54
#define CX23885_BOARD_VIEWCAST_460E 55 #define CX23885_BOARD_VIEWCAST_460E 55
#define CX23885_BOARD_HAUPPAUGE_QUADHD_DVB 56
#define GPIO_0 0x00000001 #define GPIO_0 0x00000001
#define GPIO_1 0x00000002 #define GPIO_1 0x00000002
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment